arXiv subjects

Frédéric Ott

Publications and source records attributed to Frédéric Ott.

11 recordsLinked to original sources

arXiv2019

Exact resolution function for double-disk chopper neutron time-of-flight spectrometers : Application to reflectivity

The exact resolution function in transfer vector for the reflectometer HERMÈS at Laboratoire Léon Brillouin is calculated as an example of neutron time-of-fligh spectrometer with double-disk chopper. Calculation accounts for wavelength distribution of the incident beam, tilt of the chopper axis, collimation and gravity, without approximation of gaussian distributions or independence of these different contributions. Numerical implementation is provided that matches the sections of the paper. We show that data fitting using this exact resolution function allows us to reach much better results than its usual approximation by a gaussian profile.

physics.ins-det↗

arXiv2019

The SONATE project, a French CANS for Materials Sciences Research

We describe the Compact Accelerator-based Neutron Source SONATE which we are aiming for to replace the close Orph{é}e reactor at Saclay, France. The SONATE source would serve an instrumental suite of about 10 instruments. The instruments would be split into low resolution instruments and higher resolution instruments. Our reference design is based on a proton accelerator operating at an energy in the range 20-30 MeV. The accelerator would serve 2 target stations. The first one operating at 20Hz with 2ms long pulses serving low resolution instruments (SANS, reflectivity, imaging, spin-echo) and the second one operating at 100Hz, 200$μ$s long pulses serving higher resolution instruments (powder diffraction, Direct Time-of-flight spectroscopy, Indirect geometry spectroscopy). The 2 operation modes would be interlaced. The peak current on the target is aimed at 100 mA with an average power on the target on the order of 50-80 kW. Numerical Monte-Carlo simulations show that we may expect instrument performances equivalent to the current instruments around Orph{é}e or ISIS.

physics.acc-ph↗

arXiv2018

Neutron Scattering Instrumentation at Compact Neutron Sources

There is currently a strong interest in Compact Accelerator-based Neutron Source (CANS) as a possible new type of source for neutron scattering experiments. A workshop around the "Neutron scattering instrumentation around CANS" was organized in July 2017 between several European institutes. This report summarizes the main outcome of the discussions. The document is aiming at providing general guidelines for the instrumentation around CANS. Detailed technical discussions are or will be provided in specific publications.

physics.ins-det↗

arXiv2017

Performances of Neutron Scattering Spectrometers on a Compact Neutron Source

There is currently a big effort put into the operation and construction of world class neutron scattering facilities (SNS and SNS-TS2 in the US, J-PARC in Japan, ESS in Europe, CSS in China, PIK in Russia). On the other hand, there exists a network of smaller neutron scattering facilities which play a key role in creating a large neutron scattering community who is able to efficiently use the existing facilities. With the foreseen closure of the ageing nuclear research reactors, especially in Europe there is a risk of seeing a shrinking of the community who would then be able to use efficiently the world class facilities. There is thus a reflection being conducted in several countries for the replacement of smaller research reactors with low energy accelerator based sources. We consider here a reference design for a compact neutron source based on existing accelerator components. We estimate the performances of various types of neutron scattering instruments built around such a source. The results suggest that nowadays state of the art neutron scattering experiments could be successfully performed on such a compact source and that it is thus a viable replacement solution for neutron research reactors.

physics.ins-det↗

arXiv2016

Optimization of the magnetic properties of aligned Co nanowires/polymer composites for the fabrication of permanent magnets

We aim at combining high coercivity magnetic nanowires in a polymer matrix in a view to fabricate rare--earth free bonded magnets. In particular, our aim is to fabricate anisotropic materials by aligning the wires in the polymer matrix. We have explored the different parameters of the fabrication process in order to produce a material with the best possible magnetic properties. We show that the choice of a proper solvent allows obtaining stable nanowire suspensions. The length and the type of the polymer chains play also an important role. Smaller chains ($M_w < 10000$) provide better magnetization results. The magnetic field applied during the casting of the material plays also a role and should be of the order of a fraction of a tesla. The local order of the nanowires in the matrix has been characterized by TEM and Small Angle Neutron Scattering. The correlation between the local order of the wires and the magnetic properties is discussed. Materials with coercivity $μ_0 H_c$ up to 0.70 $T$ at room temperature have been obtained.

cond-mat.mtrl-sci↗

arXiv2014

Ordered arrays of magnetic nanowires investigated by polarized small-angle neutron scattering

Polarized small-angle neutron scattering (PSANS) experimental results obtained on arrays of ferromagnetic Co nanowires ($ϕ\approx13$ nm) embedded in self-organized alumina (Al$_{2}$O$_{3}$) porous matrices are reported. The triangular array of aligned nanowires is investigated as a function of the external magnetic field with a view to determine experimentally the real space magnetization $\vec{M}(\vec{r})$ distribution inside the material during the magnetic hysteresis cycle. The observation of field-dependentSANSintensities allows us to characterize the influence of magnetostatic fields. The PSANS experimental data are compared to magnetostatic simulations. These results evidence that PSANS is a technique able to address real-space magnetization distributions in nanostructured magnetic systems. We show that beyond structural information (shape of the objects, two-dimensional organization) already accessible with nonpolarized SANS, using polarized neutrons as the incident beam provides information on the magnetic form factor and stray fields \textgreek{m}0Hd distribution in between nanowires.

cond-mat.mtrl-sci↗

arXiv2013

Numerical calculation of magnetic form factors of complex shape nano-particles coupled with micromagnetic simulations

We investigate the calculation of the magnetic form factors of nano-objects with complex geometrical shapes and non homogeneous magnetization distributions. We describe a numerical procedure which allows to calculate the 3D magnetic form factor of nano-objects from realistic magnetization distributions obtained by micromagnetic calculations. This is illustrated in the canonical cases of spheres, rods and platelets. This work is a first step towards a 3D vectorial reconstruction of the magnetization at the nanometric scale using neutron scattering techniques.

cond-mat.mtrl-sci↗

arXiv2012

Adsorption of MultiLamellar tubes with a temperature tunable diameter at the air-water interface: a process driven by the bulk properties

The behavior at the air/water interface of multilamellar tubes made of the ethanolamine salt of the 12-hydroxy stearic acid as a function of the temperature has been investigated using Neutron Reflectivity. Those tubes are known to exhibit a temperature tunable diameter in the bulk. We have observed multilamellar tubes adsorbed at the air/water interface by specular neutron reflectivity. Interestingly, at the interface, the adsorbed tubes exhibit the same behavior than in the bulk upon heating. There is however a peculiar behavior at around 50\degree for which the increase of the diameter of the tubes at the interface yields an unfolding of those tubes into a multilamellar layer. Upon further heating, the tubes re-fold and their diameter re-decrease after what they melt as observed in the bulk. All structural transitions at the interface are nevertheless shown to be quasi-completely reversible. This provides to the system a high interest for its interfacial properties because the structure at the air/water interface can be tuned easily by the temperature.

cond-mat.soft↗

arXiv2012

High temperature structural and magnetic properties of cobalt nanowires

We present in this paper the structural and magnetic properties of high aspect ratio Co nanoparticles (~10) at high temperatures (up to 623 K) using in situ X ray diffraction (XRD) and SQUID characterizations. We show that the anisotropic shapes, the structural and texture properties are preserved up to 500 K. The coercivity can be modelled by u0Hc=2(Kmc+Kshape)/Ms with Kmc the magnetocrystalline anisotropy constant, Kshape the shape anisotropy constant and Ms the saturation magnetization. Hc decreases linearly when the temperature is increased due to the loss of the Co magnetocrystalline anisotropy contribution. At 500K, 50% of the room temperature coercivity is preserved corresponding to the shape anisotropy contribution only. We show that the coercivity drop is reversible in the range 300 - 500 K in good agreement with the absence of particle alteration. Above 525 K, the magnetic properties are irreversibly altered either by sintering or by oxidation.

cond-mat.mtrl-sci↗

arXiv2011

Dipolar interactions in magnetic nanowires aggregates

We investigate the role of dipolar interactions on the magnetic properties of nanowires aggregates. Micromagnetic simulations show that dipolar interactions between wires are not detrimental to the high coercivity properties of magnetic nanowires composites even in very dense aggregates. This is confirmed by experimental magnetization measurements and Henkel plots which show that the dipolar interactions are small. Indeed, we show that misalignment of the nanowires in aggregates leads to a coercivity reduction of only 30%. Direct dipolar interactions between nanowires, even as close as 2 nm, have small effects (maximum coercivity reduction of ~15%) and are very sensitive to the detailed geometrical arrangement of wires. These results strenghten the potential of magnetic composite materials based on elongated single domain particles for the fabrication of permanent magnetic materials.

cond-mat.mtrl-sci↗

arXiv2010

Dipolar interactions in arrays of ferromagnetic nanowires: a micromagnetic study

We explore the behavior of periodic arrays of magnetic nanowires by micromagnetic simulations using the Nmag modeling package. A large number of modeling studies on such arrays of nanowires have been performed using finite size models. We show that these finite size micromagnetic descriptions can only be used in specific situations. We perform a systematic study of more or less dense 1D and 2D arrays of nanowires using either finite size or infinite size models and we show that finite size models fail to capture some of the features of real infinite systems. We show that that the mean field model scaled to the system porosity is valid. This work can be used as a basis to the extension of micromagnetic calculations of the magnetization dynamics in arrays of nanowires.

cond-mat.mtrl-sci↗