arXiv subjects

Frances M. Ross

Publications and source records attributed to Frances M. Ross.

30 records · Page 2Linked to original sources

arXiv2022

Strain-tunable Berry curvature in quasi-two-dimensional chromium telluride

Magnetic transition metal chalcogenides form an emerging platform for exploring spin-orbit driven Berry phase phenomena owing to the nontrivial interplay between topology and magnetism. Here we show that the anomalous Hall effect in pristine Cr2Te3 thin films manifests a unique temperature-dependent sign reversal at nonzero magnetization, resulting from the momentum-space Berry curvature as established by first-principles simulations. The sign change is strain tunable, enabled by the sharp and well-defined substrate/film interface in the quasi-two-dimensional Cr2Te3 epitaxial films, revealed by scanning transmission electron microscopy and depth-sensitive polarized neutron reflectometry. This Berry phase effect further introduces hump-shaped Hall peaks in pristine Cr2Te3 near the coercive field during the magnetization switching process, owing to the presence of strain-modulated magnetic domains. The versatile interface tunability of Berry curvature in Cr2Te3 thin films offers new opportunities for topological electronics.

cond-mat.mtrl-sci↗

arXiv2022

Probing defects and spin-phonon coupling in CrSBr via resonant Raman scattering

Understanding the stability limitations and defect formation mechanisms in 2D magnets is essential for their utilization in spintronic and memory technologies. Here, we correlate defects in mono- to multilayer CrSBr with their structural, vibrational and magnetic properties. We use resonant Raman scattering to reveal distinct vibrational defect signatures. In pristine CrSBr, we show that bromine atoms mediate vibrational interlayer coupling, allowing for distinguishing between surface and bulk defect modes. We show that environmental exposure causes drastic degradation in monolayers, with the formation of intralayer defects. Through deliberate ion irradiation, we tune the formation of defect modes, which we show are strongly polarized and resonantly enhanced, reflecting the quasi-1D electronic character of CrSBr. Strikingly, we observe pronounced signatures of spin-phonon coupling of the intrinsic phonon modes and the ion beam induced defect modes throughout the magnetic transition temperature. Overall, we demonstrate that CrSBr shows air stability above the monolayer threshold, and provide further insight into the quasi-1D physics present. Moreover, we demonstrate defect engineering of magnetic properties and show that resonant Raman spectroscopy can serve as a direct fingerprint of magnetic phases and defects in CrSBr.

cond-mat.mes-hall↗

arXiv2022

Kinetic control for planar oxidation of MoS$_2$

Layered transition metal dichalcogenide (TMD) semiconductors oxidize readily in a variety of conditions, and a thorough understanding of this oxide formation is required for the advancement of TMD-based microelectronics. Here, we combine scanning transmission electron microscopy (STEM) with spectroscopic ellipsometry (SE) to investigate oxide formation at the atomic scale of the most widely-studied TMD, MoS$_2$. We find that aggressive thermal oxidation results in $α$-phase plate-like crystalline MoO$_3$ with sharp interfaces, voids, and a textured alignment with the underlying MoS$_2$. Experiments with remote substrates and patterned MoS$_2$ prove that thermal oxidation proceeds via vapor-phase mass transport and redeposition - a challenge to forming thin, conformal planar oxide films. We accelerate the kinetics of oxidation relative to the kinetics of mass transport using a non-thermal oxygen plasma process, to form a smooth and conformal amorphous oxide. The resulting amorphous MoO$_3$ films can be grown several nanometers thick, and we calibrate the oxidation rate for varying plasma processing conditions. Our results illustrate how TMD semiconductor oxidation differs significantly from oxidation of legacy semiconductors, most notably silicon, and provide quantitative guidance for managing both the atomic scale structure and thin film morphology of oxides in the design and processing of MoS$_2$ semiconductor devices.

physics.app-ph↗

arXiv2022

Mechanisms of quasi-van der Waals epitaxy of 3D metallic nanoislands on suspended 2D materials

Understanding structure at the interface between two-dimensional (2D) materials and 3D metals is crucial for designing novel 2D/3D heterostructures and improving the performance of many 2D material devices. Here, we quantify and discuss the 2D/3D interface structure and the 3D morphology in several materials systems. We first deposit facetted Au nanoislands on graphene and transition metal dichalcogenides, using measurements of the equilibrium island shape to determine values for the 2D/Au interface energies and examining the role of surface reconstructions, chemical identity, and defects on the grown structures. We then deposit the technologically relevant metals Ti and Nb under conditions where kinetic rather than thermodynamic factors govern growth. We describe a transition from dendritic to facetted islands as a function of growth temperature and discuss the factors determining island shape in these materials systems. Finally, we show that suspended 2D materials enable the fabrication of a novel type of 3D/2D/3D heterostructure and discuss the growth mechanism. We suggest that emerging nanodevices will utilize such versatile fabrication of 2D/3D heterostructures with well-characterized interfaces and morphologies.

cond-mat.mtrl-sci↗

arXiv2022

Suspended graphene membranes to control Au nucleation and growth

Control of nucleation sites is an important goal in materials growth: nuclei in regular arrays may show emergent photonic or electronic behavior, and once the nuclei coalesce into thin films, the nucleation density influences parameters such as surface roughness, stress, and grain boundary structure. Tailoring substrate properties to control nucleation is therefore a powerful tool for designing functional thin films and nanomaterials. Here, we examine nucleation control for metals deposited on two-dimensional (2D) materials in a situation where substrate effects are absent and heterogeneous nucleation sites are minimized. Through quantification of faceted, epitaxial Au island nucleation on graphene, we show that ultra-low nucleation densities with nuclei several micrometers apart can be achieved on suspended graphene under conditions where we measure the nucleation density to be 2-3 orders of magnitude higher on the adjacent supported substrate. We estimate diffusion distances using nucleation theory and find a strong sensitivity of nucleation and diffusion to suspended graphene thickness. We suggest that nucleation site density control via substrate tuning may act as a platform for applications where non-lithographic patterning of metals on graphene is beneficial.

cond-mat.mtrl-sci↗

arXiv2022

Direct Imaging and Electronic Structure Modulation of Moiré Superlattices at the 2D/3D Interface

The atomic structure at the interface between two-dimensional (2D) and three-dimensional (3D) materials influences properties such as contact resistance, photo-response, and high-frequency electrical performance. Moiré engineering is yet to be utilized for tailoring this 2D/3D interface, despite its success in enabling correlated physics at 2D/2D interfaces. Using epitaxially aligned MoS2/Au{111} as a model system, we demonstrate the use of advanced scanning transmission electron microscopy (STEM) combined with a geometric convolution technique in imaging the crystallographic 32 A moiré pattern at the 2D/3D interface. This moiré period is often hidden in conventional electron microscopy, where the Au structure is seen in projection. We show, via ab initio electronic structure calculations, that charge density is modulated according to the moiré period, illustrating the potential for (opto-)electronic moiré engineering at the 2D/3D interface. Our work presents a general pathway to directly image periodic modulation at interfaces using this combination of emerging microscopy techniques.

cond-mat.mtrl-sci↗

arXiv2022

Sensing the local magnetic environment through optically active defects in a layered magnetic semiconductor

Atomic-level defects in van der Waals (vdW) materials are essential building blocks for quantum technologies and quantum sensing applications. The layered magnetic semiconductor CrSBr is an outstanding candidate for exploring optically active defects owing to a direct gap in addition to a rich magnetic phase diagram including a recently hypothesized defect-induced magnetic order at low temperature. Here, we show optically active defects in CrSBr that are probes of the local magnetic environment. We observe spectrally narrow (1 meV) defect emission in CrSBr that is correlated with both the bulk magnetic order and an additional low temperature defect-induced magnetic order. We elucidate the origin of this magnetic order in the context of local and non-local exchange coupling effects. Our work establishes vdW magnets like CrSBr as an exceptional platform to optically study defects that are correlated with the magnetic lattice. We anticipate that controlled defect creation allows for tailor-made complex magnetic textures and phases with the unique ingredient of direct optical access.

cond-mat.mes-hall↗

arXiv2021

Atomistic spin textures on-demand in the van der Waals layered magnet CrSBr

Controlling magnetism in low dimensional materials is essential for designing devices that have feature sizes comparable to several critical length scales that exploit functional spin textures, allowing the realization of low-power spintronic and magneto-electric hardware. [1] Unlike conventional covalently-bonded bulk materials, van der Waals (vdW)-bonded layered magnets [2-4] offer exceptional degrees of freedom for engineering spin textures. [5] However, their structural instability has hindered microscopic studies and manipulations. Here, we demonstrate nanoscale structural control in the layered magnet CrSBr creating novel spin textures down to the atomic scale. We show that it is possible to drive a local structural phase transformation using an electron beam that locally exchanges the bondings in different directions, effectively creating regions that have vertical vdW layers embedded within the horizontally vdW bonded exfoliated flakes. We calculate that the newly formed 2D structure is ferromagnetically ordered in-plane with an energy gap in the visible spectrum, and weak antiferromagnetism between the planes. Our study lays the groundwork for designing and studying novel spin textures and related quantum magnetic phases down to single-atom sensitivity, potentially to create on-demand spin Hamiltonians probing fundamental concepts in physics, [6-10] and for realizing high-performance spintronic, magneto-electric and topological devices with nanometer feature sizes. [11,12]

cond-mat.mes-hall↗

arXiv2020

One-Dimensional Twisted and Tubular Structures of Zinc Oxide by Semiconductor-Catalyzed Vapor-Liquid-Solid Synthesis

The exploration of new catalysts for the vapor-liquid-solid (VLS) synthesis of one-dimensional (1-D) materials promises to yield new morphologies and functionality. Here, we show, for the model ZnO system, that this possible using a semiconductor (Ge) catalyst. In particular, two unusual morphologies are described: twisted nanowires and twisted nanotubes, in addition to the usual straight nanowires. The twisted nanotubes show large hollow cores and surprisingly high twisting rates (up to 9o/μm), which cannot be easily explained through the Eshelby twist model. A combination of ex situ and in situ transmission electron microscopy measurements suggest that the hollow core results from a competition between growth and etching at the Ge-ZnO interface during synthesis. The twisting rate is consistent with a softening of elastic rigidity. These results indicate that the use of unconventional, nonmetallic catalysts provide opportunities to synthesize unusual oxide structures with potentially useful properties.

cond-mat.mtrl-sci↗

arXiv2018

Atomic scale characterization of graphene p-n junctions for electron-optical applications

Graphene p-n junctions offer a potentially powerful approach towards controlling electron trajectories via collimation and focusing in ballistic solid-state devices. The ability of p-n junctions to control electron trajectories depends crucially on the doping profile and roughness of the junction. Here, we use four-probe scanning tunneling microscopy and spectroscopy (STM/STS) to characterize two state-of-the-art graphene p-n junction geometries at the atomic scale, one with CMOS polySi gates and another with naturally cleaved graphite gates. Using spectroscopic imaging, we characterize the local doping profile across and along the p-n junctions. We find that realistic junctions exhibit non-ideality both in their geometry as well as in the doping profile across the junction. We show that the geometry of the junction can be improved by using the cleaved edge of van der Waals metals such as graphite to define the junction. We quantify the geometric roughness and doping profiles of junctions experimentally and use these parameters in Nonequilibrium Green's Function based simulations of focusing and collimation in these realistic junctions. We find that for realizing Veselago focusing, it is crucial to minimize lateral interface roughness which only natural graphite gates achieve, and to reduce junction width, in which both devices under investigation underperform. We also find that carrier collimation is currently limited by the non-linearity of the doping profile across the junction. Our work provides benchmarks of the current graphene p-n junction quality and provides guidance for future improvements.

cond-mat.mes-hall↗

arXiv2017

Dynamics of nanoscale bubbles growing in a tapered conduit

We predict the dynamics and shapes of nanobubbles growing in a supersaturated solution confined within a tapered, Hele-Shaw device with a small opening angle $Φ\ll 1$. Our study is inspired by experimental observations of the growth and translation of nanoscale bubbles, ranging in diameter from tens to hundreds of nanometers, carried out with liquid-cell transmission electron microscopy. In our experiments, the electron beam plays a dual role: it supersaturates the solution with gaseous radiolysis products, which lead to bubble nucleation and growth, and it provides a means to image the bubbles in-situ with nanoscale resolution. To understand our experimental data, we propose a migration mechanism, based on Blake-Haynes theory, which is applicable in the asymptotic limits of zero capillary and Bond numbers and high confinement. Consistent with experimental data, our model predicts that in the presence of confinement, growth rates are orders of magnitude slower compared to a bubble growing in the bulk and that the combination of a tapered channel and contact line pinning create tear-drop shaped bubbles.

physics.flu-dyn↗

arXiv2012

Electron Beam Artifacts in Liquid-Cell Electron Microscopy

Bubbles may form when imaging liquids with in situ liquid-cell electron microscopy. Fluid dynamics videos show beam-induced bubble nucleation and growth. By examining the bubble formation and growth process, we hope to gain a better understanding of interactions between the electron beam and liquids.

physics.flu-dyn↗