SearcharxivSearch

arXiv subjects

Francesc Font

Publications and source records attributed to Francesc Font.

10 recordsLinked to original sources

Approximate solutions to the shrinking core model and their interpretation

The shrinking core model describes the reaction of a spherical solid particle with a surrounding fluid. In this work, we revisit the SCM by deriving it from the underlying physical processes and performing a careful non-dimensionalisation, which highlights the limitations of the commonly used pseudo-steady-state approximation, particularly in liquid-solid systems where fluid and solid densities are comparable. To address these limitations, we derive approximate analytical solutions using a perturbation method that improves upon the pseudo-steady-state model. We also obtain a small-time solution capturing early transient behavior. A semi-implicit finite difference scheme is implemented to solve the full model numerically and benchmark the analytical approximations. We demonstrate that the perturbation solution provides significantly improved accuracy over the pseudo-steady-state model, especially in diffusion-limited regimes. Finally, we propose a simple fitting procedure combining the perturbation with the early-time solutions to estimate physical parameters from experimental data at minimal computational cost.

cond-mat.other

Modelling hydrogen storage in metal hydrides

We develop a one-dimensional mathematical model for the loading process of hydrogen in a metal hydride tank. The model describes the evolution of the density and pressure of the hydrogen gas, the temperature of the tank, the averaged velocity of the gas through the porous metal structure, and the transformed fraction of metal into a metal hydride. The non-dimensionalisation of the model indicates a possible reduction of the system of equations and also shows that the density and the transformed metal fraction may be decoupled from the temperature equation. The reduced model is solved numerically. Introducing a spatial dependence into the kinetic reaction constant allows to explain unexpected temperature gradients observed in experiments.

cond-mat.mtrl-sci

Assessment of averaged 1D models for column adsorption with 3D computational experiments

In the present manuscript, we formulate a 3D mathematical model describing the capture of a contaminant in an adsorption column. The novelty of our approach involves the description of mass transfer by adsorption via a nonlinear evolution equation defined on the surface of the porous media, while Stokes flow and an advection-diffusion equation describe the contaminant transport through the interstices. Simulations of 3D models with varying microstructures but identical porosity reveal a minimal impact of the microstructure on contaminant distribution within the column, particularly in the radial direction. Using homogenization theory and a periodic microstructure, we rigorously derive a 1D adsorption model that matches the standard form that is found in the literature, but contains two effective coefficients, the dispersion and the permeability, that explicitly incorporate microstructural details of the porous medium. The 1D model closely reproduces 3D results, the 1D concentration profiles closely match the cross-section averaged 3D profiles, and the outlet breakthrough curves are nearly identical. We also demonstrate how the 3D simulations converge to the solution of the 1D model as the microstructure is refined. Consequently, our model offers a theoretical foundation for the widely used 1D model, confirming its reliability for investigating, optimizing, and aiding in the design of column adsorption processes for practical applications.

physics.flu-dyn

Modelling large mass removal in adsorption columns

A mathematical model is developed to describe column adsorption when the contaminant constitutes a significant amount of the fluid. This requires modelling the variation of pressure and velocity, in addition to the usual advection-diffusion-adsorption and kinetic equations describing concentration and adsorption rates. The model builds on previous work based on a linear kinetic equation, to include both physical and chemical adsorption. A semi-analytical solution is developed and validated against a numerical solution. The model is tested against experimental data for the adsorption of large quantities of CO$_2$ from a helium mixture, with a CO$_2$ volume fraction ranging from 14% to 69%, and a N$_2$ mixture with 16% to 33% CO$_2$ volume fraction. Our results show a significant improvement with respect to models for the removal of trace amounts of contaminant.

physics.flu-dyn

Modelling mass transfer from a packed bed by fluid extraction

A mathematical model describing the erosion or leaching of a solid material by a flowing fluid in a column is developed. This involves an advection-diffusion equation coupled to a linear kinetic reaction describing the mass transfer between the solid and fluid. Two specific cases are analysed, the first where the extracted material has the same saturation solubility and rate of mass transfer throughout the process, the second where the solubility switches after a certain amount of erosion. In the first case there are only two model unknowns, the solubility and mass transfer coefficient, in the second there is a third unknown, the second solubility. Exploiting the fact that erosion is a slow process (relative to the flow rate) a perturbation solution based on the smallness of the amount removed is developed to describe the concentration and radius throughout the column. From this an analytical expression for the extracted fraction is obtained. The extracted fraction has a large linear section which results in a simple calculation to estimate the initial solubility from a very few or even a single data point. The remaining unknowns may also be easily calculated from the formula and later data points. A numerical solution, using finite differences, is developed to verify the perturbation solution. The analytical solution is also verified against experimental data for the removal of lanolin from wool fibres with a supercritical CO$_\text{2}$/ethanol solvent. Values for the mass transfer rate and two solubilities are obtained for different pressures and shown to provide excellent agreement with a series of experimental results for the extracted fraction.

cond-mat.other

Mathematical modelling of fibre coating

In this report we formulate and analyse a mathematical model describing the evolution of a thin liquid film coating a wire via an extrusion process. We consider the Navier-Stokes equations for a 2D incompressible Newtonian fluid coupled to the standard equation relating the fluid surface tension with the curvature. Taking the lubrication theory approximation and assuming steady state, the problem is reduced to a single third-order differential equation for the thin film height. An approximate analytical solution for the final film height is derived and compared with a numerical solution obtained by means of a shooting scheme. Good agreement between the two solutions is obtained, resulting in a relative error of around 5\%. The approximate solution reveals that the key control parameters for the process are the initial film height, the fluid surface tension and viscosity, the wire velocity and the angle of exit at the extruder.

physics.flu-dyn

Non-equilibrium molecular dynamics and continuum modelling of transient freezing of atomistic solids

In this work we investigate the transient solidification of a Lennard-Jones liquid using non-equilibrium molecular dynamics simulations and continuum heat transfer theory. The simulations are performed in slab-shaped boxes, where a cold thermostat placed at the centre of the box drives the solidification of the liquid. Two well-defined solid fronts propagate outwards from the centre towards the ends of the box until solidification is completed. A continuum phase change model that accounts for the difference between the solid and the liquid densities is formulated to describe the evolution of the temperature and the position of the solidification front. Simulation results for a small and a large nanoscale system, of sizes $30.27$\,nm and $60.54$\,nm, are compared with the predictions of the theoretical model. Following a transient period of $\sim$20-40 ps and a displacement of the solidification front of 1-2.5 nm we find that the simulations and the continuum theory show good agreement. We use this fact to combine the simulation and theoretical approaches to design a simple procedure to calculate the latent heat of the material. We also perform simulations of the homogeneous freezing process, i.e. in the absence of a temperature gradient and at constant temperature, by quenching the liquid at supercooled temperatures. We demonstrate that the solidification rate of homogenous freezing is much faster than the one obtained under a thermal gradient for systems of the same size subject to the same thermostat temperature. Our study and conclusions should be of general interest to a wide range of atomistic solids.

cond-mat.mes-hall

A one-phase Stefan problem with size-dependent thermal conductivity

In this paper a one-phase Stefan problem with size-dependent thermal conductivity is analysed. Approximate solutions to the problem are found via perturbation and numerical methods, and compared to the Neumann solution for the equivalent Stefan problem with constant conductivity. We find that the size-dependant thermal conductivity, relevant in the context of solidification at the nanoscale, slows down the solidification process. A small time asymptotic analysis reveals that the position of the solidification front in this regime behaves linearly with time, in contrast to the Neumann solution characterized by a square root of time proportionality. This has an important physical consequence, namely the speed of the front predicted by size-dependant conductivity model is finite while the Neumann solution predicts an infinite and, thus, unrealistic speed as $t\rightarrow0$.

cond-mat.other

Binder migration during drying of lithium-ion battery electrodes: modelling and comparison to experiment

The drying process is a crucial step in electrode manufacture as it can affect the component distribution within the electrode. Phenomena such as binder migration can have negative effects in the form of poor cell performance (e.g. capacity fade) or mechanical failure (e.g. electrode delamination from the current collector). We present a mathematical model that tracks the evolution of the binder concentration in the electrode during drying. Solutions to the model predict that low drying rates lead to a favourable homogeneous binder profile across the electrode film, whereas high drying rates result in an unfavourable accumulation of binder near the evaporation surface. These results show strong qualitative agreement with experimental observations and provide a cogent explanation for why fast drying conditions result in poorly performing electrodes. Finally, we provide some guidelines on how the drying process could be optimised to offer relatively short drying times whilst simultaneously maintaining a roughly homogeneous binder distribution.

cond-mat.soft

Non-characteristic Half-lives in Radioactive Decay

Half-lives of radionuclides span more than 50 orders of magnitude. We characterize the probability distribution of this broad-range data set at the same time that explore a method for fitting power-laws and testing goodness-of-fit. It is found that the procedure proposed recently by Clauset et al. [SIAM Rev. 51, 661 (2009)] does not perform well as it rejects the power-law hypothesis even for power-law synthetic data. In contrast, we establish the existence of a power-law exponent with a value around 1.1 for the half-life density, which can be explained by the sharp relationship between decay rate and released energy, for different disintegration types. For the case of alpha emission, this relationship constitutes an original mechanism of power-law generation.

physics.data-an