Searcharxiv⌕ Search

arXiv subjects

Francesco Borrelli

Publications and source records attributed to Francesco Borrelli.

At least 55 records · Page 3Linked to original sources

Energy-Efficient Lane Changes Planning and Control for Connected Autonomous Vehicles on Urban Roads

This paper presents a novel energy-efficient motion planning algorithm for Connected Autonomous Vehicles (CAVs) on urban roads. The approach consists of two components: a decision-making algorithm and an optimization-based trajectory planner. The decision-making algorithm leverages Signal Phase and Timing (SPaT) information from connected traffic lights to select a lane with the aim of reducing energy consumption. The algorithm is based on a heuristic rule which is learned from human driving data. The optimization-based trajectory planner generates a safe, smooth, and energy-efficient trajectory toward the selected lane. The proposed strategy is experimentally evaluated in a Vehicle-in-the-Loop (VIL) setting, where a real test vehicle receives SPaT information from both actual and virtual traffic lights and autonomously drives on a testing site, while the surrounding vehicles are simulated. The results demonstrate that the use of SPaT information in autonomous driving leads to improved energy efficiency, with the proposed strategy saving 37.1% energy consumption compared to a lane-keeping algorithm.

cs.RO↗

Output Feedback Stochastic MPC with Hard Input Constraints

We present an output feedback stochastic model predictive controller (SMPC) for constrained linear time-invariant systems. The system is perturbed by additive Gaussian disturbances on state and additive Gaussian measurement noise on output. A Kalman filter is used for state estimation and an SMPC is designed to satisfy chance constraints on states and hard constraints on actuator inputs. The proposed SMPC constructs bounded sets for the state evolution and a tube-based constraint tightening strategy where the tightened constraints are time-invariant. We prove that the proposed SMPC can guarantee an infeasibility rate below a user-specified tolerance. We numerically compare our method with a classical output feedback SMPC with simulation results which highlight the efficacy of the proposed algorithm.

eess.SY↗

Predictive Control for Autonomous Driving with Uncertain, Multi-modal Predictions

We propose a Stochastic MPC (SMPC) formulation for path planning with autonomous vehicles in scenarios involving multiple agents with multi-modal predictions. The multi-modal predictions capture the uncertainty of urban driving in distinct modes/maneuvers (e.g., yield, keep speed) and driving trajectories (e.g., speed, turning radius), which are incorporated for multi-modal collision avoidance chance constraints for path planning. In the presence of multi-modal uncertainties, it is challenging to reliably compute feasible path planning solutions at real-time frequencies ($\geq$ 10 Hz). Our main technological contribution is a convex SMPC formulation that simultaneously (1) optimizes over parameterized feedback policies and (2) allocates risk levels for each mode of the prediction. The use of feedback policies and risk allocation enhances the feasibility and performance of the SMPC formulation against multi-modal predictions with large uncertainty. We evaluate our approach via simulations and road experiments with a full-scale vehicle interacting in closed-loop with virtual vehicles. We consider distinct, multi-modal driving scenarios: 1) Negotiating a traffic light and a fast, tailgating agent, 2) Executing an unprotected left turn at a traffic intersection, and 3) Changing lanes in the presence of multiple agents. For all of these scenarios, our approach reliably computes multi-modal solutions to the path-planning problem at real-time frequencies.

cs.RO↗

Learning Robustness with Bounded Failure: An Iterative MPC Approach

We propose an approach to design a Model Predictive Controller (MPC) for constrained Linear Time Invariant systems performing an iterative task. The system is subject to an additive disturbance, and the goal is to learn to satisfy state and input constraints robustly. Using disturbance measurements after each iteration, we construct Confidence Support sets, which contain the true support of the disturbance distribution with a given probability. As more data is collected, the Confidence Supports converge to the true support of the disturbance. This enables design of an MPC controller that avoids conservative estimate of the disturbance support, while simultaneously bounding the probability of constraint violation. The efficacy of the proposed approach is then demonstrated with a detailed numerical example.

eess.SY↗

Learning to Satisfy Unknown Constraints in Iterative MPC

We propose a control design method for linear time-invariant systems that iteratively learns to satisfy unknown polyhedral state constraints. At each iteration of a repetitive task, the method constructs an estimate of the unknown environment constraints using collected closed-loop trajectory data. This estimated constraint set is improved iteratively upon collection of additional data. An MPC controller is then designed to robustly satisfy the estimated constraint set. This paper presents the details of the proposed approach, and provides robust and probabilistic guarantees of constraint satisfaction as a function of the number of executed task iterations. We demonstrate the safety of the proposed framework and explore the safety vs. performance trade-off in a detailed numerical example.

eess.SY↗

Data-Driven Optimization for Deposition with Degradable Tools

We present a data-driven optimization approach for robotic controlled deposition with a degradable tool. Existing methods make the assumption that the tool tip is not changing or is replaced frequently. Errors can accumulate over time as the tool wears away and this leads to poor performance in the case where the tool degradation is unaccounted for during deposition. In the proposed approach, we utilize visual and force feedback to update the unknown model parameters of our tool-tip. Subsequently, we solve a constrained finite time optimal control problem for tracking a reference deposition profile, where our robot plans with the learned tool degradation dynamics. We focus on a robotic drawing problem as an illustrative example. Using real-world experiments, we show that the error in target vs actual deposition decreases when learned degradation models are used in the control design.

cs.RO↗

Increasing Electric Vehicles Utilization in Transit Fleets using Learning, Predictions, Optimization, and Automation

This work presents a novel hierarchical approach to increase Battery Electric Buses (BEBs) utilization in transit fleets. The proposed approach relies on three key components. A learning-based BEB digital twin cloud platform is used to accurately predict BEB charge consumption on a per vehicle, per driver, and per route basis, and accurately predict the time-to-charge BEB batteries to any level. These predictions are then used by a Predictive Block Assignment module to maximize the BEB fleet utilization. This module computes the optimal BEB daily assignment and charge management strategy. A Depot Parking and Charging Queue Management module is used to autonomously park and charge the vehicles based on their charging demands. The paper discusses the technical approach and benefits of each level in architecture and concludes with a realistic simulations study. The study shows that if our approach is employed, BEB fleet utilization can increase by 50% compared to state-of-the-art methods.

eess.SY↗

Learning for Online Mixed-Integer Model Predictive Control with Parametric Optimality Certificates

We propose a supervised learning framework for computing solutions of multi-parametric Mixed Integer Linear Programs (MILPs) that arise in Model Predictive Control. Our approach also quantifies sub-optimality for the computed solutions. Inspired by Branch-and-Bound techniques, the key idea is to train a Neural Network/Random Forest, which for a given parameter, predicts a strategy consisting of (1) a set of Linear Programs (LPs) such that their feasible sets form a partition of the feasible set of the MILP and (2) a candidate integer solution. For control computation and sub-optimality quantification, we solve a set of LPs online in parallel. We demonstrate our approach for a motion planning example and compare against various commercial and open-source mixed-integer programming solvers.

eess.SY↗

Robust Output-Lifted Learning Model Predictive Control

We propose an iterative approach for designing Robust Learning Model Predictive Control (LMPC) policies for a class of nonlinear systems with additive, unmodelled dynamics. The nominal dynamics are assumed to be difference flat, i.e., the state and input can be reconstructed using flat output sequences. For the considered class of systems, we synthesize Robust MPC policies and show how to use historical trajectory data collected during iterative tasks to 1) obtain bounds on the unmodelled dynamics and 2) construct a convex value function approximation along with a convex safe set in the space of output sequences for designing terminal components in the Robust MPC design. We show that the proposed strategy guarantees robust constraint satisfaction, asymptotic convergence to a desired subset of the state space, and non-decreasing closed-loop performance at each policy update. Finally, simulation results demonstrate the effectiveness of the proposed strategy on a minimum time control problem using a constrained nonlinear and uncertain vehicle model.

eess.SY↗

Facilitating Cooperative and Distributed Multi-Vehicle Lane Change Maneuvers

A distributed coordination method for solving multi-vehicle lane changes for connected autonomous vehicles (CAVs) is presented. Existing approaches to multi-vehicle lane changes are passive and opportunistic as they are implemented only when the environment allows it. The novel approach of this paper relies on the role of a facilitator assigned to a CAV. The facilitator interacts with and modifies the environment to enable lane changes of other CAVs. Distributed MPC path planners and a distributed coordination algorithm are used to control the facilitator and other CAVs in a proactive and cooperative way. We demonstrate the effectiveness of the proposed approach through numerical simulations. In particular, we show enhanced feasibility of a multi-CAV lane change in comparison to the simultaneous multi-CAV lane change approach in various traffic conditions generated by using a data-set from real-traffic scenarios.

cs.RO↗

A Gaussian Process Model for Opponent Prediction in Autonomous Racing

In head-to-head racing, an accurate model of interactive behavior of the opposing target vehicle (TV) is required to perform tightly constrained, but highly rewarding maneuvers such as overtaking. However, such information is not typically made available in competitive scenarios, we therefore propose to construct a prediction and uncertainty model given data of the TV from previous races. In particular, a one-step Gaussian process (GP) model is trained on closed-loop interaction data to learn the behavior of a TV driven by an unknown policy. Predictions of the nominal trajectory and associated uncertainty are rolled out via a sampling-based approach and are used in a model predictive control (MPC) policy for the ego vehicle in order to intelligently trade-off between safety and performance when attempting overtaking maneuvers against a TV. We demonstrate the GP-based predictor in closed loop with the MPC policy in simulation races and compare its performance against several predictors from literature. In a Monte Carlo study, we observe that the GP-based predictor achieves similar win rates while maintaining safety in up to 3x more races. We finally demonstrate the prediction and control framework in real-time in a experimental study on a 1/10th scale racecar platform operating at speeds of around 2.8 m/s, and show a significant level of improvement when using the GP-based predictor over a baseline MPC predictor. Videos of the hardware experiments can be found at https://youtu.be/KMSs4ofDfIs.

cs.RO↗

Reinforcement Learning and Distributed Model Predictive Control for Conflict Resolution in Highly Constrained Spaces

This work presents a distributed algorithm for resolving cooperative multi-vehicle conflicts in highly constrained spaces. By formulating the conflict resolution problem as a Multi-Agent Reinforcement Learning (RL) problem, we can train a policy offline to drive the vehicles towards their destinations safely and efficiently in a simplified discrete environment. During the online execution, each vehicle first simulates the interaction among vehicles with the trained policy to obtain its strategy, which is used to guide the computation of a reference trajectory. A distributed Model Predictive Controller (MPC) is then proposed to track the reference while avoiding collisions. The preliminary results show that the combination of RL and distributed MPC has the potential to guide vehicles to resolve conflicts safely and smoothly while being less computationally demanding than the centralized approach.

cs.RO↗

ParkPredict+: Multimodal Intent and Motion Prediction for Vehicles in Parking Lots with CNN and Transformer

The problem of multimodal intent and trajectory prediction for human-driven vehicles in parking lots is addressed in this paper. Using models designed with CNN and Transformer networks, we extract temporal-spatial and contextual information from trajectory history and local bird's eye view (BEV) semantic images, and generate predictions about intent distribution and future trajectory sequences. Our methods outperform existing models in accuracy, while allowing an arbitrary number of modes, encoding complex multi-agent scenarios, and adapting to different parking maps. To train and evaluate our method, we present the first public 4K video dataset of human driving in parking lots with accurate annotation, high frame rate, and rich traffic scenarios.

cs.CV↗

Collaborative learning model predictive control for repetitive tasks

This paper presents a cloud-based learning model predictive controller that integrates three interacting components: a set of agents, which must learn to perform a finite set of tasks with the minimum possible local cost; a coordinator, which assigns the tasks to the agents; and the cloud, which stores data to facilitate the agents' learning. The tasks consist in traveling repeatedly between a set of target states while satisfying input and state constraints. In turn, the state constraints may change in time for each of the possible tasks. To deal with it, different modes of operation, which establish different restrictions, are defined. The agents' inputs are found by solving local model predictive control (MPC) problems where the terminal set and cost are defined from previous trajectories. The data collected by each agent is uploaded to the cloud and made accessible to all their peers. Likewise, similarity between tasks is exploited to accelerate the learning process. The applicability of the proposed approach is illustrated by simulation results.

eess.SY↗

Multi-vehicle Conflict Resolution in Highly Constrained Spaces by Merging Optimal Control and Reinforcement Learning

We present a novel method to address the problem of multi-vehicle conflict resolution in highly constrained spaces. An optimal control problem is formulated to incorporate nonlinear, non-holonomic vehicle dynamics and exact collision avoidance constraints. A solution to the problem can be obtained by first learning configuration strategies with reinforcement learning (RL) in a simplified discrete environment, and then using these strategies to shape the constraint space of the original problem. Simulation results show that our method can explore efficient actions to resolve conflicts in confined space and generate dexterous maneuvers that are both collision-free and kinematically feasible.

cs.RO↗

Stochastic MPC with Realization-Adaptive Constraint Tightening

This paper presents a stochastic model predictive controller (SMPC) for linear time-invariant systems in the presence of additive disturbances. The distribution of the disturbance is unknown and is assumed to have a bounded support. A sample-based strategy is used to compute sets of disturbance sequences necessary for robustifying the state chance constraints. These sets are constructed offline using samples of the disturbance extracted from its support. For online MPC implementation, we propose a novel reformulation strategy of the chance constraints, where the constraint tightening is computed by adjusting the offline computed sets based on the previously realized disturbances along the trajectory. The proposed MPC is recursive feasible and can lower conservatism over existing SMPC approaches at the cost of higher offline computational time. Numerical simulations demonstrate the effectiveness of the proposed approach.

eess.SY↗

A Sequential Quadratic Programming Approach to the Solution of Open-Loop Generalized Nash Equilibria

Dynamic games can be an effective approach to modeling interactive behavior between multiple non-cooperative agents and they provide a theoretical framework for simultaneous prediction and control in such scenarios. In this work, we propose a numerical method for the solution of local generalized Nash equilibria (GNE) for the class of open-loop general-sum dynamic games for agents with nonlinear dynamics and constraints. In particular, we formulate a sequential quadratic programming (SQP) approach which requires only the solution of a single convex quadratic program at each iteration. Central to the robustness of our approach is a non-monotonic line search method and a novel merit function for SQP step acceptance. We show that our method achieves linear convergence in the neighborhood of local GNE and we derive an update rule for the merit function which helps to improve convergence from a larger set of initial conditions. We demonstrate the effectiveness of the algorithm in the context of car racing, where we show up to 32\% improvement of success rate when comparing against a state-of-the-art solution approach for dynamic games. \url{https://github.com/zhu-edward/DGSQP}.

eess.SY↗

Robust MPC for Linear Systems with Parametric and Additive Uncertainty: A Novel Constraint Tightening Approach

We propose a novel approach to design a robust Model Predictive Controller (MPC) for constrained uncertain linear systems. The uncertain system is modeled as linear parameter varying with additive disturbance. Set bounds for the system matrices and the additive uncertainty are assumed to be known. We formulate a novel optimization-based constraint tightening strategy around a predicted nominal trajectory which utilizes these bounds. With an appropriately designed terminal cost function and constraint set, we prove robust satisfaction of the imposed constraints by the resulting MPC in closed-loop with the uncertain system, and Input to State Stability of the origin. We highlight the efficacy of our proposed approach via a numerical example.

eess.SY↗