arXiv subjects

Francesco Chiabrera

Publications and source records attributed to Francesco Chiabrera.

14 recordsLinked to original sources

arXiv2026

Structure-driven analog optical control in ion-pumped SrFeO$_{3-\delta}$ thin-film devices

Electrochromic devices (ECDs) offer a compelling route toward low-power, non-emissive optical modulators with nonvolatile states. However, their widespread implementation is hindered by limitations in operating voltage, switching speed, color tunability, and long-term stability. Mixed ionic-electronic conductors (MIECs) provide a promising alternative platform, enabling optical modulation through ion-driven redox and structural transformations. Oxygen-based MIECs offer enhanced durability, environmental robustness, and compatibility with oxide electronics and silicon photonics, yet remain largely underexplored for electrochromic and photonic applications. Here, we demonstrate structure-driven analog optical control in an ion-pumped SrFeO$_{3-\delta}$ thin-film device by undergoing reversible oxygen-driven phase transitions between brownmillerite and perovskite structures. Phase transition is accompanied by pronounced changes in its electronic structure and optical constants. By harnessing these ion-induced structural transformations and integrating an optically passive Al$_2$O$_3$ interference layer, we achieve continuous and reversible modulation of optical transmittance and color. These results provide a general framework for ion-driven analog photonic and electrochromic devices and highlight the potential of oxygen-based MIECs for next-generation ionochromic systems compatible with silicon-based photonic platforms.

physics.app-ph↗

arXiv2025

Investigating oxides by electrochemical projection of the oxygen off-stoichiometry diagram onto a single sample

The oxygen stoichiometry is an essential key to tune functional properties of advanced oxide materials and thus has motivated numerous studies of the oxygen off-stoichiometry diagram, with the aim to determine and control structural, electronic, ionic, electrochemical and optical properties, as well as thermodynamic quantities such as the oxygen storage capacity, among others. Here, a novel approach is developed, which allows to project a broad range of oxygen chemical potentials onto a single thin film sample with unprecedented control via electrochemical polarization. Therefore, a specifically designed electrochemical cell geometry is deployed, resulting in a well-defined, linear, 1D in-plane oxygen concentration gradient, independent of variations in the materials electrical resistivity, whose endpoints can be flexibly controlled via the external pO2 and applied overpotential. This allows for an unparalleled study of materials properties as a continuous function of the oxygen content using spatially resolved tools (spectroscopic, diffraction, microscopy, local electrical probes, etc.) and thereby greatly reduces experimental efforts while also avoiding sample-to-sample variability, multi-step treatments, sample evolution effects, etc. This work presents the proof-of-concept of in-plane oxygen gradients, based on spatially resolved ex/in situ and novel fixed-energy X-ray absorption near edge spectroscopy (XANES), X-ray diffraction, ellipsometry and electrical resistivity measurements in hyper-stoichiometric La2NiO4+{\delta} and sub-stoichiometric (La,Sr)FeO3-{\delta} thin films. It thereby demonstrates the readiness and wide applicability of this innovative approach, which can be highly relevant for fundamental as well as applied research.

cond-mat.mtrl-sci↗

arXiv2024

Analog control of electrical conductivity in La0.5Sr0.5FeO3-{\delta} through oxygen deficiency induced magnetic transition

Switchability of materials properties by applying controlled stimuli such as voltage pulses is an emerging field of study with applicability in adaptive and programmable devices like neuromorphic transistors or non-emissive smart displays. One of the most exciting approaches to modulate materials performance is mobile ion/vacancy insertion for inducing changes in relevant electrical, optical, or magnetic properties, among others. Unveiling the interplay between changes in the concentration of mobile defects (like oxygen vacancies) and functional properties in relevant materials represents a step forward for underpinning the emerging oxide iontronics discipline. In this work, electrochemical oxide-ion pumping cells were fabricated for an analog control of the oxygen stoichiometry in thin films of mixed ionic-electronic conductor La0.5Sr0.5FeO3-{\delta}. We demonstrate over more than 4 orders of magnitude electronic conductivity control within the same crystallographic phase through the precise and continuous voltage control of the oxygen stoichiometry. We show that behind the modification of the transport properties of the material lays a paramagnetic-to-antiferromagnetic transition. We exploit such magnetoelectric coupling to show control over the exchange interaction between La0.5Sr0.5FeO3-{\delta} and a ferromagnetic Co layer deposited on top.

cond-mat.mtrl-sci↗

arXiv2024

Solid-State Oxide-Ion Synaptic Transistor for Neuromorphic Computing

Neuromorphic hardware facilitates rapid and energy-efficient training and operation of neural network models for artificial intelligence. However, existing analog in-memory computing devices, like memristors, continue to face significant challenges that impede their commercialization. These challenges include high variability due to their stochastic nature. Microfabricated electrochemical synapses offer a promising approach by functioning as an analog programmable resistor based on deterministic ion-insertion mechanisms. Here, we developed an all-solid-state oxide-ion synaptic transistor employing $\text{Bi}_2\text{V}_{0.9}\text{Cu}_{0.1}\text{O}_{5.35}$ as a superior oxide-ion conductor electrolyte and $\text{La}_\text{0.5}\text{Sr}_\text{0.5}\text{F}\text{O}_\text{3-$\delta$}$ as a variable resistance channel able to efficiently operate at temperatures compatible with conventional electronics. Our transistor exhibits essential synaptic behaviors such as long- and short-term potentiation, paired-pulse facilitation, and post-tetanic potentiation, mimicking fundamental properties of biological neural networks. Key criteria for efficient neuromorphic computing are satisfied, including excellent linear and symmetric synaptic plasticity, low energy consumption per programming pulse, and high endurance with minimal cycle-to-cycle variation. Integrated into an artificial neural network (ANN) simulation for handwritten digit recognition, the presented synaptic transistor achieved a 96% accuracy on the MNIST dataset, illustrating the effective implementation of our device in ANNs. These findings demonstrate the potential of oxide-ion based synaptic transistors for effective implementation in analog neuromorphic computing based on iontronics.

cs.ET↗

arXiv2024

Optoionic Impedance Spectroscopy (OIS): a model-less technique for in-situ electrochemical characterization of mixed ionic electronic conductors

Functional properties of mixed ionic electronic conductors (MIECs) can be radically modified by (de)insertion of mobile charged defects. A complete control of this dynamic behaviour has multiple applications in a myriad of fields including advanced computing, data processing, sensing or energy conversion. However, the effect of different MIECs state-of-charge is not fully understood yet and there is a lack of strategies for fully controlling the defect content in a material. In this work we present a model-less technique to characterize ionic defect concentration and ionic insertion kinetics in MIEC materials: Optoionic Impedance Spectroscopy (OIS). The proof of concept and advantages of OIS are demonstrated by studying the oxygen (de)insertion in thin films of hole-doped perovskite oxides. Ion migration into/out of the studied materials is achieved by the application of an electrochemical potential, achieving stable and reversible modification of its optical properties. By tracking the dynamic variation of optical properties depending on the gating conditions, OIS enables to extract electrochemical parameters involved in the electrochromic process. The results demonstrate the capability of the technique to effectively characterize the kinetics of single- and even multi- layer systems. The technique can be employed for studying underlying mechanisms of the response characteristics of MIEC-based devices.

physics.app-ph↗

arXiv2024

Real time observation of oxygen diffusion in CGO thin films using spatially resolved Isotope Exchange Raman Spectroscopy

The exploitation of advanced materials for novel energy, health and computing applications requires fundamental understanding of enabling physicochemical mechanisms, including ionic and electronic conductivity, defect formation processes and reaction kinetics. Therefore, access to underlying constants of functional materials via advanced but straightforward experimental techniques is key. We present a novel, cheap and widely applicable approach to analyze oxygen-tracer-diffusion in thin films with unprecedented time resolution based on the novel in situ isotope-exchange Raman spectroscopy (IERS) methodology. Raman spectroscopy is sensitive to changes in the local isotopic composition, manifested by a frequency shift of the oxygen Raman modes. Employing a Raman transparent capping layer allows to establish an in-plane tracer gradient and follow the isotope exchange and diffusion processes via consecutive spatial and time resolved in situ Raman line scans. Mass-transport coefficients are calculated from these isotopic gradients, similar to conventional techniques, but with an additional time-component, not accessible by other techniques. Here, we study gadolinium doped ceria (CGO) thin films, capped with Si3N4 or Al2O3. We report diffusion coefficients within the temperature range of interest for intermediate temperature emerging applications (300-500{\deg}C) and confirm the validity of the measurement procedure and extracted parameters by comparison with FEM simulations and literature results.

cond-mat.mtrl-sci↗

arXiv2023

Ion Intercalation in Lanthanum Strontium Ferrite for Aqueous Electrochemical Energy Storage Devices

Ion intercalation of perovskite oxides in liquid electrolytes is a very promising method for controlling their functional properties while storing charge, which opens the potential application in different energy and information technologies. Although the role of defect chemistry in the oxygen intercalation in a gaseous environment is well established, the mechanism of ion intercalation in liquid electrolytes at room temperature is poorly understood. In this study, the defect chemistry during ion intercalation of La0.5Sr0.5FeO3-δ thin films in alkaline electrolytes is studied. Oxygen and proton intercalation into the LSF perovskite structure is observed at moderate electrochemical potentials (0.5 V to -0.4 V), giving rise to a change in the oxidation state of Fe (as a charge compensation mechanism). The variation of the concentration of holes as a function of the intercalation potential was characterized by in-situ ellipsometry and the concentration of electron holes was indirectly quantified for different electrochemical potentials. Finally, a dilute defect chemistry model that describes the variation of defect species during ionic intercalation was developed.

cond-mat.mtrl-sci↗

arXiv2023

Isotope Exchange Raman Spectroscopy (IERS): a novel technique to probe physicochemical processes $in$ $situ$

We have developed a novel in situ methodology for the direct study of mass transport properties in oxides with spatial and unprecedented time resolution, based on Raman spectroscopy coupled to isothermal isotope exchanges. Changes in the isotope concentration, resulting in a Raman frequency shift, can be followed in real time, not accessible by conventional methods, enabling complementary insights for the study of ion transport properties of electrode and electrolyte materials for advanced solid-state electrochemical devices. The proof of concept and strengths of isotope exchange Raman spectroscopy (IERS) are demonstrated by studying the oxygen isotope back-exchange in gadolinium-doped ceria (CGO) thin films. Resulting oxygen self-diffusion and surface exchange coefficients are compared to conventional time-of-flight secondary ion mass spectrometry (ToF-SIMS) characterisation and literature values, showing good agreement, while at the same time providing additional insight, challenging established assumptions. IERS captivates through its rapidity, simple setup, non-destructive nature, cost effectiveness and versatile fields of application and thus can readily be integrated as new standard tool for in situ and operando characterization in many laboratories worldwide. The applicability of this method is expected to consolidate our understanding of elementary physicochemical processes and impact various emerging fields including solid oxide cells, battery research and beyond.

cond-mat.mtrl-sci↗

arXiv2021

Pushing the Study of Point Defects in Thin Film Ferrites to Low Temperatures Using In Situ Ellipsometry

Unveiling point defects concentration in transition metal oxide thin films is essential to understand and eventually control their functional properties, employed in an increasing number of applications and devices. Despite this unquestionable interest, there is a lack of available experimental techniques able to estimate the defect chemistry and equilibrium constants in such oxides at intermediate-to-low temperatures. In this study, the defect chemistry of a relevant material such as La1-xSrxFeO3-d (LSF) with (x = 0.2, 0.4 and 0.5 (LSF20, LSF40 and LSF50 respectively) is obtained by using a novel in situ spectroscopic ellipsometry approach applied to thin films. Through this technique, the concentration of holes in LSF is correlated to measured optical properties and its evolution with temperature and oxygen partial pressure is determined. In this way, a systematic description of defect chemistry in LSF thin films in the temperature range from 350dC to 500dC is obtained for the first time, which represents a step forward in the understanding of LSF20, LSF40 and LSF50 for emerging low temperature applications.

cond-mat.mtrl-sci↗

arXiv2019

Unraveling Bulk and Grain Boundary Electrical Properties in La0.8Sr0.2Mn1-yO3 Thin Films

Grain boundaries in Sr-doped LaMnO3 thin films have been shown to strongly influence the electronic and oxygen mass transport properties, being able to profoundly modify the nature of the material. The unique behaviour of the grain boundaries can be correlated with substantial modifications of the cation concentration at the interfaces, which can be tuned by changing the overall cationic ratio in the films. In this work, we study the electronic properties of La0.8Sr0.2Mn1-yO3 thin films with variable Mn content. The influence of the cationic composition on the grain boundary and grain bulk electronic properties is elucidated by studying the manganese valence state evolution using spectroscopy techniques and by confronting the electronic properties of epitaxial and polycrystalline films. Substantial differences in the electronic conduction mechanism are found in the presence of grain boundaries and depending on the manganese content. Moreover, the unique defect chemistry of the nanomaterial is elucidated by measuring the electrical resistance of the thin films as a function of oxygen partial pressure, disclosing the importance of the cationic local non-stoichiometry on the thin films behavior.

cond-mat.mtrl-sci↗

arXiv2018

Nanonionics and interfaces for energy and information technologies

There is a growing interest in the development of functional metal oxides with mixed ionic electronic conduction for their application in different strategic fields. In particular, ionic transport-related phenomena are of primary importance in energy transformation and storage devices, such as solid oxides fuel cells (SOFC) or batteries. Traditionally, the main issue that hindered a wide spread of solid state electrochemical devices is the slow ionic conduction and the reduced number of families of materials with pure ionic conductivity able to play the role of the electrolyte. This is due to the low mobility of the ionic charge carriers and their mechanical and coulombic interactions with their host crystal structures. For relatively big and charged ions, e.g. O2- or Na+, the low ionic conductivity imposes operating at high temperatures, which is incompatible with some applications such as portable electronics.

cond-mat.mtrl-sci↗

arXiv2018

Insights into the enhancement of oxygen mass transport properties of strontium doped lanthanum manganite interface-dominated thin films

Strontium doped lanthanum manganite thin films were deposited by pulsed laser deposition on yttria stabilized zirconia single crystals for a comprehensive electrochemical characterization of the material acting as a cathode. A physically meaningful electrical model was employed to fit the electrochemical impedance spectroscopy results in order to extract the main oxygen mass transport parameters as a function of the temperature and oxygen partial pressure. The oxygen diffusion and surface exchange coefficients extracted from the analysis showed several orders of magnitude of enhancement with respect to the bulk values reported in the literature and an unexpectedly low dependence with the oxygen partial pressure. Different observations were combined to propose a mechanism for the enhanced incorporation of oxygen in interface dominated thin films mainly based on the high concentration of oxygen vacancies expected in the grain boundaries.

cond-mat.mtrl-sci↗

arXiv2018

Unveiling the outstanding oxygen mass transport properties of Mn-rich perovskites in grain boundary-dominated La0.8Sr0.2(Mn1-xCox)0.85O3-d nanostructures

Ion transport in solid-state devices is of great interest for current and future energy and information technologies. A superior enhancement of several orders of magnitude of the oxygen diffusivity has been recently reported for grain boundaries in lanthanum strontium manganites. However, the significance and extent of this unique phenomenon is not yet established. Here, we fabricate a thin film continuous composition map of the La0.8Sr0.2(Mn1-xCox)0.85O3-d family revealing a substantial enhancement of the grain boundary oxygen mass transport properties for the entire range of compositions. Through isotope-exchange depth profiling coupled to secondary ion mass spectroscopy, we show that this excellent performance is not directly linked to the bulk of the material but to the intrinsic nature of the grain boundary. In particular, the great increase of the oxygen diffusion in Mn-rich compositions unveils an unprecedented catalytic performance in the field of Mixed Ionic Electronic Conductors. These results present grain boundaries engineering as a novel strategy for designing highly performing materials for solid state ionics based devices.

cond-mat.mtrl-sci↗

arXiv2017

Micro solid oxide fuel cells: a new generation of micro-power sources for portable applications

Portable electronic devices are already an indispensable part of our daily life; and their increasing number and demand for higher performance is becoming a challenge for the research community. In particular, a major concern is the way to efficiently power these energy-demanding devices, assuring long grid independency with high efficiency, sustainability and cheap production. In this context, technologies beyond Li-ion are receiving increasing attention, among which the development of micro solid oxide fuel cells (μSOFC) stands out. In particular, μSOFC provides a high energy density, high efficiency and opens the possibility to the use of different fuels, such as hydrocarbons. Yet, its high operating temperature has typically hindered its application as miniaturized portable device. Recent advances have however set a completely new range of lower operating temperatures, i.e. 350-450C, as compared to the typical >900C needed for classical bulk SOFC systems. In this work, a comprehensive review of the status of the technology is presented. The main achievements, as well as the most important challenges still pending are discussed, regarding (i.) the cell design and microfabrication, and (ii.) the integration of functional electrolyte and electrode materials. To conclude, the different strategies foreseen for a wide deployment of the technology as new portable power source are underlined.

physics.app-ph↗