arXiv subjects

Francesco Daghero

Publications and source records attributed to Francesco Daghero.

At least 19 recordsLinked to original sources

arXiv2026

MAUPITI: On-Device Prototype-Based Learning on a Smart Infrared Sensor

Low-resolution infrared (IR) array sensors represent an interesting solution for privacy-preserving human sensing in embedded systems. In this letter, we describe a smart multi-pixel IR sensor integrating a 16$\times$16 thermal MOSFET (TMOS) array and a RISC-V microcontroller extended with low-precision SIMD instructions, capable of on-device learning and continual adaptation for pose and gesture recognition tasks under tight memory and power constraints ($<$32kB on-chip memory, $\approx$1.5mW). To avoid the memory overheads of backpropagation and replay buffers, we adopt a prototype-based Nearest Class Mean (NCM) classifier in which a simple Convolutional Neural Network (CNN) encoder is trained and quantized offline, while class prototypes are stored and updated on the device in streaming mode. With experiments on two datasets, we show that this approach yields accuracy on par with a conventional classifier, with negligible latency overheads in both the classification and the prototype update ($<$0.29% considering both phases), effectively enabling online adaptation of the perception framework.

cs.LG↗

arXiv2026

Persona-as-Configuration: Generative Stakeholder Reporting for Agricultural Floods

Cyber-physical systems built on deterministic edge inference, such as on-vehicle flood detection for agricultural fields, produce structured decision logs that must be interpreted differently by heterogeneous stakeholders. Pairing such systems with large language models (LLMs) to generate stakeholder-specific reports introduces a tension: the generative layer is non-deterministic, while the edge plane must remain replayable and auditable. We propose an architectural pattern resting on two invariants: unidirectional consumption, in which the generative layer is a strict read-only consumer of the deterministic plane and never writes back, and persona-as-configuration, in which stakeholder adaptation is a versioned prompt-template artifact rather than runtime improvisation. We instantiate the pattern as a context-aware dashboard layer over the JSON decision logs of a previously published edge-based standing-water detection system, and analyse how the integration boundary admits standard generative-reliability mitigations as configuration- or middleware-level extension points. A structured expert review rated the pattern favourably across five ISO/IEC 25010-aligned quality dimensions, with strongest agreement on separation of concerns. End-user evaluation with agricultural stakeholders is planned for future work.

cs.SE↗

arXiv2026

SAKE: Software Architectural Knowledge Evaluation Benchmark for Large Language Models

Large Language Models (LLMs) are increasingly used as assistants across the software development lifecycle, yet their ability to reason about software architecture remains largely unmeasured. Architectural decision-making depends on quality attribute trade-offs, design patterns, and system-level constraints, none of which are exercised by benchmarks that target syntactic or algorithmic tasks. We introduce SAKE (Software Architectural Knowledge Evaluation), a standardized and reproducible benchmark for assessing software architectural knowledge in LLMs. SAKE comprises 2154 expert-curated multiple-choice questions, each with four options, stratified across eight architectural categories and four context-length levels. We evaluate 11 proprietary and open-weight models in zero-shot and five-shot settings. Overall accuracy is high, but performance varies markedly across categories, revealing competency gaps in areas central to professional practice. SAKE, its evaluation scripts, and all results are released as open source to give the community a baseline for tracking architectural reasoning in LLMs.

cs.SE↗

arXiv2026

Hierarchical adaptive control for real-time dynamic inference at the edge

Industrial systems increasingly depend on Machine Learning (ML), and operate on heterogeneous nodes that must satisfy tight latency, energy, and memory constraints. Dynamic ML models, which reconfigure their computational footprint at runtime, promise high energy efficiency and lower average latency for modest accuracy tradeoffs; however, their deployment is complex due to the additional hyperparameters they rely on. These hyperparameters, controlling the accuracy versus average latency tradeoff, are often tuned on a calibration dataset that must match the test time distribution, an assumption that rarely holds in real-world scenarios, leading to suboptimal operational conditions, possibly below static models. We propose a two-tier adaptive architecture that co-optimizes model and system decisions. At the global level, a scheduler configures and deploys, for each edge node, a cascade of classifiers composed of lightweight specialized models and a generalist fallback, satisfying latency and memory constraints. At the node level, a local controller tracks data drifts and hardware resources, enabling or disabling specialized predictors (SP) to preserve high energy efficiency and avoid latency-constraint violations under varying conditions. This design allows longer operating times without forcing a global redeployment step, and enables efficient execution in case of an unreachable remote global controller. We evaluate the approach on two datasets under controlled distribution mismatch scenarios, showing average per-inference reductions of latency up to 2.45x and energy up to 2.86x, with less than 4% accuracy drop compared to static baselines. Our contributions are:(1) a budgeted SP-cascade formulation that preserves worst-case latency constraints;(2) a hierarchical controller that maintains efficiency under data and resource changes; and (3) an experimental evaluation on embedded hardware.

cs.LG↗

arXiv2025

Lightweight Software Kernels and Hardware Extensions for Efficient Sparse Deep Neural Networks on Microcontrollers

The acceleration of pruned Deep Neural Networks (DNNs) on edge devices such as Microcontrollers (MCUs) is a challenging task, given the tight area- and power-constraints of these devices. In this work, we propose a three-fold contribution to address this problem. First, we design a set of optimized software kernels for N:M pruned layers, targeting ultra-low-power, multicore RISC-V MCUs, which are up to 2.1x and 3.4x faster than their dense counterparts at 1:8 and 1:16 sparsity, respectively. Then, we implement a lightweight Instruction-Set Architecture (ISA) extension to accelerate the indirect load and non-zero indices decompression operations required by our kernels, obtaining up to 1.9x extra speedup, at the cost of a 5% area overhead. Lastly, we extend an open-source DNN compiler to utilize our sparse kernels for complete networks, showing speedups of 3.21x and 1.81x on a ResNet18 and a Vision Transformer (ViT), with less than 1.5% accuracy drop compared to a dense baseline.

cs.LG↗

arXiv2024

MATCH: Model-Aware TVM-based Compilation for Heterogeneous Edge Devices

Streamlining the deployment of Deep Neural Networks (DNNs) on heterogeneous edge platforms, coupling within the same micro-controller unit (MCU) instruction processors and hardware accelerators for tensor computations, is becoming one of the crucial challenges of the TinyML field. The best-performing DNN compilation toolchains are usually deeply customized for a single MCU family, and porting to a different heterogeneous MCU family implies labor-intensive re-development of almost the entire compiler. On the opposite side, retargetable toolchains, such as TVM, fail to exploit the capabilities of custom accelerators, resulting in the generation of general but unoptimized code. To overcome this duality, we introduce MATCH, a novel TVM-based DNN deployment framework designed for easy agile retargeting across different MCU processors and accelerators, thanks to a customizable model-based hardware abstraction. We show that a general and retargetable mapping framework enhanced with hardware cost models can compete with and even outperform custom toolchains on diverse targets while only needing the definition of an abstract hardware model and a SoC-specific API. We tested MATCH on two state-of-the-art heterogeneous MCUs, GAP9 and DIANA. On the four DNN models of the MLPerf Tiny suite MATCH reduces inference latency by up to 60.88 times on DIANA, compared to using the plain TVM, thanks to the exploitation of the on-board HW accelerator. Compared to HTVM, a fully customized toolchain for DIANA, we still reduce the latency by 16.94%. On GAP9, using the same benchmarks, we improve the latency by 2.15 times compared to the dedicated DORY compiler, thanks to our heterogeneous DNN mapping approach that synergically exploits the DNN accelerator and the eight-cores cluster available on board.

cs.DC↗

arXiv2024

Machine Learning-based feasibility estimation of digital blocks in BCD technology

Analog-on-Top Mixed Signal (AMS) Integrated Circuit (IC) design is a time-consuming process predominantly carried out by hand. Within this flow, usually, some area is reserved by the top-level integrator for the placement of digital blocks. Specific features of the area, such as size and shape, have a relevant impact on the possibility of implementing the digital logic with the required functionality. We present a Machine Learning (ML)-based evaluation methodology for predicting the feasibility of digital implementation using a set of high-level features. This approach aims to avoid time-consuming Place-and-Route trials, enabling rapid feedback between Digital and Analog Back-End designers during top-level placement.

cs.LG↗

arXiv2024

Accelerating Depthwise Separable Convolutions on Ultra-Low-Power Devices

Depthwise separable convolutions are a fundamental component in efficient Deep Neural Networks, as they reduce the number of parameters and operations compared to traditional convolutions while maintaining comparable accuracy. However, their low data reuse opportunities make deploying them notoriously difficult. In this work, we perform an extensive exploration of alternatives to fuse the depthwise and pointwise kernels that constitute the separable convolutional block. Our approach aims to minimize time-consuming memory transfers by combining different data layouts. When targeting a commercial ultra-low-power device with a three-level memory hierarchy, the GreenWaves GAP8 SoC, we reduce the latency of end-to-end network execution by up to 11.40%. Furthermore, our kernels reduce activation data movements between L2 and L1 memories by up to 52.97%.

cs.LG↗

arXiv2024

Optimized Deployment of Deep Neural Networks for Visual Pose Estimation on Nano-drones

Miniaturized autonomous unmanned aerial vehicles (UAVs) are gaining popularity due to their small size, enabling new tasks such as indoor navigation or people monitoring. Nonetheless, their size and simple electronics pose severe challenges in implementing advanced onboard intelligence. This work proposes a new automatic optimization pipeline for visual pose estimation tasks using Deep Neural Networks (DNNs). The pipeline leverages two different Neural Architecture Search (NAS) algorithms to pursue a vast complexity-driven exploration in the DNNs' architectural space. The obtained networks are then deployed on an off-the-shelf nano-drone equipped with a parallel ultra-low power System-on-Chip leveraging a set of novel software kernels for the efficient fused execution of critical DNN layer sequences. Our results improve the state-of-the-art reducing inference latency by up to 3.22x at iso-error.

cs.CV↗

arXiv2024

HW-SW Optimization of DNNs for Privacy-preserving People Counting on Low-resolution Infrared Arrays

Low-resolution infrared (IR) array sensors enable people counting applications such as monitoring the occupancy of spaces and people flows while preserving privacy and minimizing energy consumption. Deep Neural Networks (DNNs) have been shown to be well-suited to process these sensor data in an accurate and efficient manner. Nevertheless, the space of DNNs' architectures is huge and its manual exploration is burdensome and often leads to sub-optimal solutions. To overcome this problem, in this work, we propose a highly automated full-stack optimization flow for DNNs that goes from neural architecture search, mixed-precision quantization, and post-processing, down to the realization of a new smart sensor prototype, including a Microcontroller with a customized instruction set. Integrating these cross-layer optimizations, we obtain a large set of Pareto-optimal solutions in the 3D-space of energy, memory, and accuracy. Deploying such solutions on our hardware platform, we improve the state-of-the-art achieving up to 4.2x model size reduction, 23.8x code size reduction, and 15.38x energy reduction at iso-accuracy.

cs.LG↗

arXiv2024

Model-Driven Dataset Generation for Data-Driven Battery SOH Models

Estimating the State of Health (SOH) of batteries is crucial for ensuring the reliable operation of battery systems. Since there is no practical way to instantaneously measure it at run time, a model is required for its estimation. Recently, several data-driven SOH models have been proposed, whose accuracy heavily relies on the quality of the datasets used for their training. Since these datasets are obtained from measurements, they are limited in the variety of the charge/discharge profiles. To address this scarcity issue, we propose generating datasets by simulating a traditional battery model (e.g., a circuit-equivalent one). The primary advantage of this approach is the ability to use a simulatable battery model to evaluate a potentially infinite number of workload profiles for training the data-driven model. Furthermore, this general concept can be applied using any simulatable battery model, providing a fine spectrum of accuracy/complexity tradeoffs. Our results indicate that using simulated data achieves reasonable accuracy in SOH estimation, with a 7.2% error relative to the simulated model, in exchange for a 27X memory reduction and a =2000X speedup.

eess.SP↗

arXiv2023

Efficient Deep Learning Models for Privacy-preserving People Counting on Low-resolution Infrared Arrays

Ultra-low-resolution Infrared (IR) array sensors offer a low-cost, energy-efficient, and privacy-preserving solution for people counting, with applications such as occupancy monitoring. Previous work has shown that Deep Learning (DL) can yield superior performance on this task. However, the literature was missing an extensive comparative analysis of various efficient DL architectures for IR array-based people counting, that considers not only their accuracy, but also the cost of deploying them on memory- and energy-constrained Internet of Things (IoT) edge nodes. In this work, we address this need by comparing 6 different DL architectures on a novel dataset composed of IR images collected from a commercial 8x8 array, which we made openly available. With a wide architectural exploration of each model type, we obtain a rich set of Pareto-optimal solutions, spanning cross-validated balanced accuracy scores in the 55.70-82.70% range. When deployed on a commercial Microcontroller (MCU) by STMicroelectronics, the STM32L4A6ZG, these models occupy 0.41-9.28kB of memory, and require 1.10-7.74ms per inference, while consuming 17.18-120.43 $μ$J of energy. Our models are significantly more accurate than a previous deterministic method (up to +39.9%), while being up to 3.53x faster and more energy efficient. Further, our models' accuracy is comparable to state-of-the-art DL solutions on similar resolution sensors, despite a much lower complexity. All our models enable continuous, real-time inference on a MCU-based IoT node, with years of autonomous operation without battery recharging.

cs.CV↗

arXiv2023

Dynamic Decision Tree Ensembles for Energy-Efficient Inference on IoT Edge Nodes

With the increasing popularity of Internet of Things (IoT) devices, there is a growing need for energy-efficient Machine Learning (ML) models that can run on constrained edge nodes. Decision tree ensembles, such as Random Forests (RFs) and Gradient Boosting (GBTs), are particularly suited for this task, given their relatively low complexity compared to other alternatives. However, their inference time and energy costs are still significant for edge hardware. Given that said costs grow linearly with the ensemble size, this paper proposes the use of dynamic ensembles, that adjust the number of executed trees based both on a latency/energy target and on the complexity of the processed input, to trade-off computational cost and accuracy. We focus on deploying these algorithms on multi-core low-power IoT devices, designing a tool that automatically converts a Python ensemble into optimized C code, and exploring several optimizations that account for the available parallelism and memory hierarchy. We extensively benchmark both static and dynamic RFs and GBTs on three state-of-the-art IoT-relevant datasets, using an 8-core ultra-lowpower System-on-Chip (SoC), GAP8, as the target platform. Thanks to the proposed early-stopping mechanisms, we achieve an energy reduction of up to 37.9% with respect to static GBTs (8.82 uJ vs 14.20 uJ per inference) and 41.7% with respect to static RFs (2.86 uJ vs 4.90 uJ per inference), without losing accuracy compared to the static model.

cs.LG↗

arXiv2022

Human Activity Recognition on Microcontrollers with Quantized and Adaptive Deep Neural Networks

Human Activity Recognition (HAR) based on inertial data is an increasingly diffused task on embedded devices, from smartphones to ultra low-power sensors. Due to the high computational complexity of deep learning models, most embedded HAR systems are based on simple and not-so-accurate classic machine learning algorithms. This work bridges the gap between on-device HAR and deep learning, proposing a set of efficient one-dimensional Convolutional Neural Networks (CNNs) deployable on general purpose microcontrollers (MCUs). Our CNNs are obtained combining hyper-parameters optimization with sub-byte and mixed-precision quantization, to find good trade-offs between classification results and memory occupation. Moreover, we also leverage adaptive inference as an orthogonal optimization to tune the inference complexity at runtime based on the processed input, hence producing a more flexible HAR system. With experiments on four datasets, and targeting an ultra-low-power RISC-V MCU, we show that (i) We are able to obtain a rich set of Pareto-optimal CNNs for HAR, spanning more than 1 order of magnitude in terms of memory, latency and energy consumption; (ii) Thanks to adaptive inference, we can derive >20 runtime operating modes starting from a single CNN, differing by up to 10% in classification scores and by more than 3x in inference complexity, with a limited memory overhead; (iii) on three of the four benchmarks, we outperform all previous deep learning methods, reducing the memory occupation by more than 100x. The few methods that obtain better performance (both shallow and deep) are not compatible with MCU deployment. (iv) All our CNNs are compatible with real-time on-device HAR with an inference latency <16ms. Their memory occupation varies in 0.05-23.17 kB, and their energy consumption in 0.005 and 61.59 uJ, allowing years of continuous operation on a small battery supply.

cs.LG↗

arXiv2022

Two-stage Human Activity Recognition on Microcontrollers with Decision Trees and CNNs

Human Activity Recognition (HAR) has become an increasingly popular task for embedded devices such as smartwatches. Most HAR systems for ultra-low power devices are based on classic Machine Learning (ML) models, whereas Deep Learning (DL), although reaching state-of-the-art accuracy, is less popular due to its high energy consumption, which poses a significant challenge for battery-operated and resource-constrained devices. In this work, we bridge the gap between on-device HAR and DL thanks to a hierarchical architecture composed of a decision tree (DT) and a one dimensional Convolutional Neural Network (1D CNN). The two classifiers operate in a cascaded fashion on two different sub-tasks: the DT classifies only the easiest activities, while the CNN deals with more complex ones. With experiments on a state-of-the-art dataset and targeting a single-core RISC-V MCU, we show that this approach allows to save up to 67.7% energy w.r.t. a "stand-alone" DL architecture at iso-accuracy. Additionally, the two-stage system either introduces a negligible memory overhead (up to 200 B) or on the contrary, reduces the total memory occupation.

eess.SP↗

arXiv2022

Adaptive Random Forests for Energy-Efficient Inference on Microcontrollers

Random Forests (RFs) are widely used Machine Learning models in low-power embedded devices, due to their hardware friendly operation and high accuracy on practically relevant tasks. The accuracy of a RF often increases with the number of internal weak learners (decision trees), but at the cost of a proportional increase in inference latency and energy consumption. Such costs can be mitigated considering that, in most applications, inputs are not all equally difficult to classify. Therefore, a large RF is often necessary only for (few) hard inputs, and wasteful for easier ones. In this work, we propose an early-stopping mechanism for RFs, which terminates the inference as soon as a high-enough classification confidence is reached, reducing the number of weak learners executed for easy inputs. The early-stopping confidence threshold can be controlled at runtime, in order to favor either energy saving or accuracy. We apply our method to three different embedded classification tasks, on a single-core RISC-V microcontroller, achieving an energy reduction from 38% to more than 90% with a drop of less than 0.5% in accuracy. We also show that our approach outperforms previous adaptive ML methods for RFs.

cs.LG↗

arXiv2022

Ultra-compact Binary Neural Networks for Human Activity Recognition on RISC-V Processors

Human Activity Recognition (HAR) is a relevant inference task in many mobile applications. State-of-the-art HAR at the edge is typically achieved with lightweight machine learning models such as decision trees and Random Forests (RFs), whereas deep learning is less common due to its high computational complexity. In this work, we propose a novel implementation of HAR based on deep neural networks, and precisely on Binary Neural Networks (BNNs), targeting low-power general purpose processors with a RISC-V instruction set. BNNs yield very small memory footprints and low inference complexity, thanks to the replacement of arithmetic operations with bit-wise ones. However, existing BNN implementations on general purpose processors impose constraints tailored to complex computer vision tasks, which result in over-parametrized models for simpler problems like HAR. Therefore, we also introduce a new BNN inference library, which targets ultra-compact models explicitly. With experiments on a single-core RISC-V processor, we show that BNNs trained on two HAR datasets obtain higher classification accuracy compared to a state-of-the-art baseline based on RFs. Furthermore, our BNN reaches the same accuracy of a RF with either less memory (up to 91%) or more energy-efficiency (up to 70%), depending on the complexity of the features extracted by the RF.

cs.LG↗

arXiv2022

Privacy-preserving Social Distance Monitoring on Microcontrollers with Low-Resolution Infrared Sensors and CNNs

Low-resolution infrared (IR) array sensors offer a low-cost, low-power, and privacy-preserving alternative to optical cameras and smartphones/wearables for social distance monitoring in indoor spaces, permitting the recognition of basic shapes, without revealing the personal details of individuals. In this work, we demonstrate that an accurate detection of social distance violations can be achieved processing the raw output of a 8x8 IR array sensor with a small-sized Convolutional Neural Network (CNN). Furthermore, the CNN can be executed directly on a Microcontroller (MCU)-based sensor node. With results on a newly collected open dataset, we show that our best CNN achieves 86.3% balanced accuracy, significantly outperforming the 61% achieved by a state-of-the-art deterministic algorithm. Changing the architectural parameters of the CNN, we obtain a rich Pareto set of models, spanning 70.5-86.3% accuracy and 0.18-75k parameters. Deployed on a STM32L476RG MCU, these models have a latency of 0.73-5.33ms, with an energy consumption per inference of 9.38-68.57μJ.

cs.LG↗