arXiv subjects

Francesco Marin

Publications and source records attributed to Francesco Marin.

17 recordsLinked to original sources

arXiv2025

Large amplitude mechanical coherent states and detection of weak nonlinearities in cavity optomechanics

The generation of large-amplitude coherent states of a massive mechanical resonator, and their quantum-limited detection represent useful tools for quantum sensing and for testing fundamental physics theories. In fact, any weak perturbation may affect the coherent quantum evolution of the prepared state, providing a sensitive probe for such a perturbation. Here we consider a cavity optomechanical setup and the case of the detection of a weak mechanical nonlinearity. We consider different strategies, first focusing on the stationary dynamics in the presence of multiple tones driving the system, and then focusing on non-equilibrium dynamical strategies. These methods can be successfully applied for measuring Duffing-like material nonlinearities, or effective nonlinear corrections associated with quantum gravity theories.

quant-ph↗

arXiv2025

Mechanical characterization of a membrane with an on-chip loss shield in a cryogenic environment

The quantum transduction of an rf/microwave signal to the optical domain, and vice versa, paves the way for technologies that exploit the advantages of each domain to perform quantum operations. Since electro-optomechanical devices implement a simultaneous coupling of a mechanical oscillator to both an rf/microwave field and an optical field, they are suitable for the realization of a quantum transducer. The membrane-in-the-middle setup is a possible solution, once its vibrational mode is cooled down to ultra cryogenic temperature for achieving quantum operation. This work is focused on the mechanical characterization via an optical interferometric probe, down to T=18mK, of a loss-shielded metalized membrane designed for this purpose. A stroboscopic technique has been exploited for revealing a mechanical quality factor up to 64 millions at the lowest temperature. In fact, with continuous illumination and a cryostat temperature below 1K, the heat due to optical absorption is not efficiently dissipated anymore, and the membrane remains hotter than its environment.

quant-ph↗

arXiv2025

Strong coupling and dark modes in the motion of a pair of levitated nanoparticles

We experimentally investigate a system composed of two levitating nanospheres whose motions are indirectly coupled via coherent scattering in a single optical cavity mode. The nanospheres are loaded into a double longitudinal tweezer created with two lasers at different wavelengths, where chromatic aberration leads to the formation of two separate trapping sites. We achieve strong coupling between each pair of modes in the transverse plane of the tweezer, as demonstrated by the avoided crossings observed when tuning the eigenfrequencies of the motion of one nanosphere by varying its optical potential depth. Remarkably, we show the emergence of dark modes in the overall coupled motion. The dynamics can be described in terms of spin-1/2 matrices, and the observed features are ubiquitous in a variety of classical and quantum systems. As such, our experiment will allow us to explore the classical analog of typically quantum dynamics, and in further developments to investigate the transition to the quantum domain by lowering the decoherence rate and creating stationary entanglement, as well as implementing non-stationary protocols.

physics.optics↗

arXiv2024

Coulomb coupling between two nanospheres trapped in a bichromatic optical tweezer

Levitated optomechanics is entering the multiparticle regime, paving the way for the use of arrays of strongly coupled massive oscillators to explore complex interacting quantum systems. Here, we demonstrate the trapping of two nanospheres inside a dual optical tweezer generated by two copropagating lasers operating at different wavelengths (1064 nm and 976 nm). Due to the chromatic aberration of the tweezer optics, two focal points are created approximately 9 microns apart, each one acting as an optical trap for a silica nanoparticle. At this distance, the surface charges on the nanospheres produce a Coulomb force that couples their motion along the tweezer axis. The strong coupling regime is achieved, as evidenced by the observed avoided crossing of the normal-mode frequencies. These results highlight the potential of our experimental scheme for future studies on systems of strongly coupled oscillators, including their implementation in optical cavities, both in the classical and in quantum regime.

physics.optics↗

arXiv2021

Silicon-nitride nanosensors toward room temperature quantum optomechanics

Observation of quantum phenomena in cryogenic, optically cooled mechanical resonators has been recently achieved by a few experiments based on cavity optomechanics. A well-established experimental platform is based on a thin film stoichiometric ($ Si_3 N_4 $) nanomembrane embedded in a Fabry-Perot cavity, where the coupling with the light field is provided by the radiation pressure of the light impinging on the membrane surface. Two crucial parameters have to be optimized to ensure that these systems work at the quantum level: the cooperativity $ C$ describing the optomechanical coupling and the product $ Q \times ν$ (quality factor - resonance frequency) related to the decoherence rate. A significant increase of the latter can be obtained with high aspect-ratio membrane resonators where uniform stress dilutes the mechanical dissipation. Furthermore, ultra-high $Q \times ν$ can be reached by drastically reducing the edge dissipation via clamp-tapering and/or by soft-clamping, virtually a clamp-free resonator configuration. In this work, we investigate, theoretically and experimentally, the edge loss mechanisms comparing two state-of-the-art resonators built by standard micro/nanofabrication techniques. The corresponding results would provide meaningful guidelines for designing new ultra-coherent resonating devices.

physics.optics↗

arXiv2020

Transfer of a levitating nanoparticle between optical tweezers

We demonstrate and characterize the transfer of a levitating silica nanosphere between two optical tweezers, at low pressure. Both optical traps are mounted on the heads of optical fibers and placed on translation stages in vacuum chambers. Our setup allows to physically separate the particle loading environment from the experimental chamber, where the second tweezer can position the particle inside a high Finesse optical cavity. The separation prevents from spoiling the cavity mirrors and the chamber cleanliness during the particle loading phase. Our system provides a very reliable and simply reproducible protocol for preparing cavity optomechanics experiments with levitating nanoparticles, opening the way to systematic studies of quantum phenomena and easing the realization of sensing devices.

physics.optics↗

arXiv2019

Tests of Quantum Gravity-Induced Non-Locality: Hamiltonian formulation of a non-local harmonic oscillator

Motivated by the development of on-going optomechanical experiments aimed at constraining non-local effects inspired by some quantum gravity scenarios, the Hamiltonian formulation of a non-local harmonic oscillator, and its coupling to a cavity field mode(s), is investigated. In particular, we consider the previously studied model of non-local oscillators obtained as the non-relativistic limit of a class of non-local Klein-Gordon operators, $f(\Box)$, with $f$ an analytical function. The results of previous works, in which the interaction was not included, are recovered and extended by way of standard perturbation theory. At the same time, the perturbed energy spectrum becomes available in this formulation, and we obtain the Langevin's equations characterizing the interacting system.

gr-qc↗

arXiv2018

Silicon Nitride MOMS Oscillator for Room Temperature Quantum Optomechanics

Optomechanical SiN nano-oscillators in high-finesse Fabry-Perot cavities can be used to investigate the interaction between mechanical and optical degree of freedom for ultra-sensitive metrology and fundamental quantum mechanical studies. In this work we present a nano-oscillator made of a high-stress round-shaped SiN membrane with an integrated on-chip 3D seismic filter properly designed to reduce mechanical losses. This oscillator works in the 200 kHz - 5 MHz range and features a mechanical quality factor of $Q\simeq10^7$ and a Q-frequency product in excess of $6.2 \times 10^{12}$ Hz at room temperature, fulfilling the minimum requirement for quantum ground-state cooling of the oscillator in an optomechanical cavity. The device is obtained by MEMS DRIE bulk micromachining with a two-side silicon processing on a Silicon-On-Insulator (SOI) wafer. The microfabrication process is quite flexible and additional layers could be deposited over the SiN membrane before the DRIE steps, if required for a sensing application. Therefore, such oscillator is a promising candidate for quantum sensing applications in the context of the emerging field of Quantum Technologies.

physics.app-ph↗

arXiv2016

Tests of Quantum Gravity-Induced Non-Locality via Opto-mechanical Experiments

The nonrelativistic limit of nonlocal modifications to the Klein Gordon operator is studied, and the experimental possibilities of casting stringent constraints on the nonlocality scale via planned and/or current optomechanical experiments are discussed. Details of the perturbative analysis and semianalitical simulations leading to the dynamical evolution of a quantum harmonic oscillator in the presence of non locality reported in [1], together with a comprehensive account of the experimental methodology with particular regard to sensitivity limitations related to thermal decoherence time and active cooling of the oscillator, are given. Finally, a strategy for detecting non-locality scales of the order of $10^{- 22} ÷10^{- 26}$ m by means of the spontaneous time periodic squeezing of quantum coherent states is provided.

gr-qc↗

arXiv2016

Search for light scalar Dark Matter candidate with AURIGA detector

A search for a new scalar field, called moduli, has been performed using the cryogenic resonant-mass AURIGA detector. Predicted by string theory, moduli may provide a significant contribution to the dark matter (DM) component of our universe. If this is the case, the interaction of ordinary matter with the local DM moduli, forming the Galaxy halo, will cause an oscillation of solid bodies with a frequency corresponding to the mass of moduli. In the sensitive band of AURIGA, some $100\,\mathrm{Hz}$ at around $1\,\mathrm{kHz}$, the expected signal, with a $Q=\tfrac{\triangle f}{f}\sim10^{6}$, is a narrow peak, $\triangle f\sim1\,\mathrm{mHz}$. Here the detector strain sensitivity is $h_{s}\sim2\times10^{-21}\,\mathrm{Hz^{-1/2}}$, within a factor of $2$. These numbers translate to upper limits at $95\%\,C.L.$ on the moduli coupling to ordinary matter $d_{e}\lesssim10^{-5}$ around masses $m_ϕ=3.6\cdot10^{-12}\,\mathrm{eV}$, for the standard DM halo model with $ρ_{DM}=0.3\,\mathrm{GeV/cm^{3}}$.

hep-ex↗

arXiv2016

Tests of Quantum Gravity induced non-locality via opto-mechanical quantum oscillators

Several quantum gravity scenarios lead to physics below the Planck scale characterised by nonlocal, Lorentz invariant equations of motion. We show that such non-local effective field theories lead to a modified Schrödinger evolution in the nonrelativistic limit. In particular, the nonlocal evolution of opto-mechanical quantum oscillators is characterised by a spontaneous periodic squeezing that cannot be generated by environmental effects. We discuss constraints on the nonlocality obtained by past experiments, and show how future experiments (already under construction) will either see such effects or otherwise cast severe bounds on the non-locality scale (well beyond the current limits set by the Large Hadron Collider). This paves the way for table top, high precision experiments on massive quantum objects as a promising new avenue for testing some quantum gravity phenomenology.

gr-qc↗

arXiv2015

Probing deformed commutators with macroscopic harmonic oscillators

A minimal observable length is a common feature of theories that aim to merge quantum physics and gravity. Quantum mechanically, this concept is associated to a nonzero minimal uncertainty in position measurements, which is encoded in deformed commutation relations. In spite of increasing theoretical interest, the subject suffers from the complete lack of dedicated experiments and bounds to the deformation parameters are roughly extrapolated from indirect measurements. As recently proposed, low-energy mechanical oscillators could allow to reveal the effect of a modified commutator. Here we analyze the free evolution of high quality factor micro- and nano-oscillators, spanning a wide range of masses around the Planck mass $m_{\mathrm{P}}$ (${\approx 22\,μ\mathrm{g}}$), and compare it with a model of deformed dynamics. Previous limits to the parameters quantifying the commutator deformation are substantially lowered.

gr-qc↗

arXiv2013

Coexisting attractors and chaotic canard explosions in a slow-fast optomechanical system

The multiple time scale dynamics induced by radiation pressure and photothermal effects in a high-finesse optomechanical resonator is experimentally studied. At difference with two-dimensional slow-fast systems, the transition from the quasiharmonic to the relaxational regime occurs via chaotic canard explosions, where large-amplitude relaxation spikes are separated by an irregular number of subthreshold oscillations. We also show that this regime coexists with other periodic attractors, on which the trajectories evolve on a substantially faster time scale. The experimental results are reproduced and analyzed by means of a detailed physical model of our system.

cond-mat.mes-hall↗

arXiv2011

Photothermal and thermo-refractive effects in high reflectivity mirrors at room and cryogenic temperature

Increasing requirements in the sensitivity of interferometric measurements is a common feature of several research fields, from gravitational wave detection to quantum optics. This motivates refined studies of high reflectivity mirrors and of noise sources that are tightly related to their structure. In this work we present an experimental characterization of photothermal and thermo-refractive effects in high reflectivity mirrors, i.e., of the variations in the position of their effective reflection plane due to weak residual power absorption. The measurements are performed by modulating the impinging power in the range 10 Hz $÷$ 100 kHz. The experimental results are compared with an expressly derived theoretical model in order to fully understand the phenomena and exploit them to extract useful effective thermo-mechanical parameters of the coating. The measurements are extended at cryogenic temperature, where most high sensitivity experiments are performed (or planned in future versions) and where characterizations of dielectric film coatings are still poor.

physics.optics↗

arXiv2010

Chaotically spiking attractors in suspended mirror optical cavities

A high-finesse suspended mirror Fabry-Perot cavity is experimentally studied in a regime where radiation pressure and photothermal effect are both relevant. The competition between these phenomena, operating at different time scales, produces unobserved dynamical scenarios where an initial Hopf instability is followed by the birth of small-amplitude chaotic attractors which erratically but deterministically trigger optical spikes. The observed dynamical regimes are well reproduced by a detailed physical model of the system.

nlin.CD↗

arXiv2010

Classical signature of ponderomotive squeezing in a suspended mirror resonator

The radiation pressure coupling between a low-mass moving mirror and an incident light field has been experimentally studied in a high-finesse Fabry-Perot cavity. Using classical intensity noise in order to mimic radiation pressure quantum fluctuations, the physics of ponderomotive squeezing comes into play as a result of the opto-mechanical correlations between the field quadratures. The same scheme can be used to probe ponderomotive squeezing at the quantum level, thus opening new routes in quantum optics and high sensitivity measurement experiments.

quant-ph↗

arXiv2006

Low frequency fluctuations in a Vertical Cavity Lasers: experiments versus Lang-Kobayashi dynamics

The limits of applicability of the Lang-Kobayashi (LK) model for a semiconductor laser with optical feedback are analyzed. The model equations, equipped with realistic values of the parameters, are investigated below solitary laser threshold where Low Frequency Fluctuations (LFF) are usually observed. The numerical findings are compared with experimental data obtained for the selected polarization mode from a Vertical Cavity Surface Laser (VCSEL) subject to polarization selective external feedback. The comparison reveals the bounds within which the dynamics of the LK can be considered as realistic. In particular, it clearly demonstrates that the deterministic LK, for realistic values of the linewidth enhancement factor $α$, reproduces the LFF only as a transient dynamics towards one of the stationary modes with maximal gain. A reasonable reproduction of real data from VCSEL can be obtained only by considering noisy LK or alternatively deterministic LK for extremely high $α$-values.

physics.optics↗