arXiv subjects

Francesco Mattioli

Publications and source records attributed to Francesco Mattioli.

14 recordsLinked to original sources

arXiv2026

Plasmonic-cavity Modulator for the Mid-IR with a Semi-transparent and Nonlinear Heavily-doped Semiconductor Mirror

We present a free-space plasmonic modulator based on a single heavily-doped semiconductor layer. We investigate its ability to modulate both the linear and nonlinear response at mid-infrared frequencies slightly below the plasma frequency of the semiconductor. We demonstrate electric control of the linear transmittance and reflectance, and of the efficiency of third-harmonic generation with a field-effect gate structure. We discuss further performance optimization of the device in terms of modulation speed and depth towards a fast modulator with very simple active material requirements. Our results establish a viable route toward practical plasmonic modulators and mixers operating in the mid-infrared atmospheric window available for free-space communications at wavelengths between 8 and 12 um.

physics.optics↗

arXiv2024

Linearly Multiplexed Photon Number Resolving Single-photon Detectors Array

Photon Number Resolving Detectors (PNRDs) are devices capable of measuring the number of photons present in an incident optical beam, enabling light sources to be measured and characterized at the quantum level. In this paper, we explore the performance and design considerations of a linearly multiplexed photon number-resolving single-photon detector array, integrated on a single mode waveguide. Our investigation focus on defining and analyzing the fidelity of such an array under various conditions and proposing practical designs for its implementation. Through theoretical analysis and numerical simulations, we show how propagation losses and dark counts may have a strong impact on the performance of the system and highlight the importance of mitigating these effects in practical implementations.

quant-ph↗

arXiv2024

Design and simulation of a transmon qubit chip for Axion detection

Quantum Sensing is a rapidly expanding research field that finds one of its applications in Fundamental Physics, as the search for Dark Matter. Devices based on superconducting qubits have already been successfully applied in detecting few-GHz single photons via Quantum Non-Demolition measurement (QND). This technique allows us to perform repeatable measurements, bringing remarkable sensitivity improvements and dark count rate suppression in experiments based on high-precision microwave photon detection, such as for Axions and Dark Photons search. In this context, the INFN Qub-IT project goal is to realize an itinerant single-photon counter based on superconducting qubits that will exploit QND for enhancing Axion search experiments. In this study, we present Qub-IT's status towards the realization of its first superconducting qubit device, illustrating design and simulation procedures and the characterization of fabricated Coplanar Waveguide Resonators (CPWs) for readout. We match target qubit parameters and assess a few-percent level agreement between lumped and distributed element simulation models. We reach a maximum internal quality factor of 9.2x10^5 for -92 dBm on-chip readout power.

quant-ph↗

arXiv2023

Optimal Amplitude Multiplexing of a Series of Superconducting Nanowire Single Photon Detectors

Integrated arrays of Superconducting Nanowire Single Photon Detectors (SNSPDs) have shown capabilities such as Photon Number Resolution, single photon imaging and coincidences detection, and can be effectively used also in other different applications related to quantum optics. The growing complexity of such applications requires the use of multiplexing schemes for the simultaneous readout of different detectors. A simple multiplexing scheme can be realized by arranging a series of SNSPDs elements, shunted by appropriate resistances. The goal of this work is to investigate and optimize this scheme, developing a general method able to identify the optimal sets of shunting resistences for any different application. The methodology obtained is very general, and can be extended to other detection systems.

quant-ph↗

arXiv2021

Status of the SIMP Project: Toward the Single Microwave Photon Detection

The Italian institute for nuclear physics (INFN) has financed the SIMP project (2019-2021) in order to strengthen its skills and technologies in the field of meV detectors with the ultimate aim of developing a single microwave photon detector. This goal will be pursued by improving the sensitivity and the dark count rate of two types of photodetectors: current biased Josephson Junction (JJ) for the frequency range 10-50 GHz and Transition Edge Sensor (TES) for the frequency range 30-100 GHz. Preliminary results on materials and devices characterization are presented.

physics.ins-det↗

arXiv2020

The BepiColombo SERENA/ELENA Instrument On-Ground Testing with the ELENA Special Check Out Equipment (SCOE)

The neutral particles sensor ELENA (Emitted Low Energy Neutral Atoms) for the ESA/JAXA BepiColombo mission to Mercury (in the SERENA instrument suite) is devoted to measure low energetic neutral atoms. The main goal of the experiment is measuring the sputtering emission from planetary surfaces, from E=20eV up to E=5keV, within 1D (2 deg. x 76 deg. ). ELENA original project had also a particle discrimination system based on Time-of-Flight (TOF) of particles through the shutter on the Micro Channel Plates detector (MCP), it has been withdrawn from the flight model due to design and development problems. The ELENA SCOE is the configuration/testing system of ELENA, it allows to command operations and to set up configuration parameters on the instrument and to monitor the incoming data. The TC/TM simulation/encoding/decoding software is developed respecting the CCSDS/ECSS standards implemented by ESA, and it's SCOS2000 compatible. TC generation, HK data monitoring and basic science data analysis are operated by the SERENA EGSE, developed by the Finnish Meteorological Institute (FMI), Helsinki, Finland. The data stream outcoming from the EGSE is then preprocessed from TM to user readable formats: FITS and then ASCII csv tables with metadata collected in a detached XML file, called label. This task is performed using the PacketLib, ProcessorLib, and DISCoS (PPD) framework and is going to be used as the first level prototype of the BepiColombo Science Ground Segment processing pipeline, based in ESAC, Madrid, Spain and implemented using the PDS4 data format.

astro-ph.IM↗

arXiv2019

Plasmonic superchiral lattice resonances in the mid-infrared

Recent efforts in the field of surface-enhanced spectroscopies have focused on the paradigm of superchirality, entailing the engineering of the local electromagnetic fields to boost the enantiospecific interaction between light and chiral molecules. In this framework, approaches based on both metallic and dielectric nanostructures have been proposed and have also recently been extended to vibrational circular dichroism in the mid-infrared. In this work, we design, fabricate and characterize arrays of chiral plasmonic slits featuring enhanced chiral fields in the mid-infrared. We exploit collective lattice resonances to further enhance the local intensity and to generate sharp features in the circular dichroism spectra of the platform. Such features are ideally suited to test the superchiral coupling with the vibrational resonances of chiral molecules.

cond-mat.mes-hall↗

arXiv2018

Amplitude-Multiplexed readout of single photon detectors based on superconducting nanowires

The realization of large-scale photonic circuit for quantum optics experiments at telecom wavelengths requires an increasing number of integrated detectors. Superconductive nanowire single photon detectors (SNSPDs) can be easily integrated on chip and they can efficiently detect the light propagating inside waveguides. The thermal budget of cryostats poses a limit on the maximum number of elements that can be integrated on the same chip due to the thermal impact of the readout electronics. In this paper, we propose and implement a novel scheme able for an efficient reading of several SNSPDs with only one readout port, enabling the realization of photonic circuits with a large number of modes.

quant-ph↗

arXiv2013

Superconducting series nanowire detector counting up to twelve photons

We demonstrate a superconducting photon-number-resolving detector capable of resolving up to twelve photons at telecommunication wavelengths. It is based on a series array of twelve superconducting NbN nanowire elements, each connected in parallel with an integrated resistor. The photon-induced voltage signals from the twelve elements are summed up into a single readout pulse with a height proportional to the detected photon number. Thirteen distinct output levels corresponding to the detection of n=0-12 photons are observed experimentally. A detailed analysis of the excess noise shows the potential of scaling to an even larger dynamic range.

quant-ph↗

arXiv2013

Universal Response Curve for Nanowire Superconducting Single-Photon Detectors

Using detector tomography, we investigate the detection mechanism in NbN-based superconducting single photon detectors (SSPDs). We demonstrate that the detection probability uniquely depends on a particular linear combination of bias current and energy, for a large variation of bias currents, input energies and detection probabilities, producing a universal detection curve. We obtain this result by studying multiphoton excitations in a nanodetector with a sparsity-based tomographic method that allows factoring out of the optical absorption. We discuss the implication of our model system for the understanding of meander-type SSPDs.

quant-ph↗

arXiv2012

Ultrasensitive N-photon interferometric autocorrelator

We demonstrate a novel method to measure the Nth-order (N=1, 2, 3, 4) interferometric autocorrelation with high sensitivity and temporal resolution. It is based on the combination of linear absorption and nonlinear detection in a superconducting nanodetector, providing much higher efficiency than methods based on all-optical nonlinearities. Its temporal resolution is only limited by the quasi-particle energy relaxation time, which is directly measured to be in the 20 ps range for the NbN films used in this work. We present a general model of interferometric autocorrelation with these nonlinear detectors and discuss the comparison with other approaches and possible improvements.

physics.optics↗

arXiv2012

Photon-number resolving detector based on a series array of superconducting nanowires

We present the experimental demonstration of a superconducting photon number resolving detector. It is based on the series connection of N superconducting nanowires, each connected in parallel to an integrated resistor. The device provides a single voltage readout, proportional to the number of photons absorbed in distinct nanowires. Clearly separated output levels corresponding to the detection of n=1-4 photons are observed in a 4-element detector fabricated from an NbN film on GaAs substrate, with a single-photon system quantum efficiency of 2.6% at the wavelength of 1300nm. The series-nanowire structure is promising in view of its scalability to large photon numbers and high efficiencies.

physics.ins-det↗

arXiv2010

Nanoscale single- and multi-photon mapping of optical fields

The study of optical phenomena on the subwavelength scale is becoming increasingly important in photonics, particularly in the fields of nanoemitters, photonic crystals and plasmonics. Subwavelength field patterns are evanescent and must thus be investigated with near-field techniques. The light powers emitted by nanoscale sources are extremely low, undermining the traditional approach of scattering a near field to a large (thus noisy) far-field detector. Nanoscale detectors, providing direct sensing in the near-field with small noise due to a small active area, are needed in high-sensitivity, high-resolution near-field imaging and in quantum nanophotonic circuits. Here we report the first nanoscale ~50x50nm2) detector displaying single-photon sensitivity and a nanosecond response. These nanodetectors can also be operated in multi-photon mode, where the detection threshold can be set at N=1, 2, 3 or 4 photons, thus allowing the mapping of photon number statistics on the nanoscale.

physics.optics↗

arXiv2007

Superconducting nanowire photon number resolving detector at telecom wavelength

The optical-to-electrical conversion, which is the basis of optical detectors, can be linear or nonlinear. When high sensitivities are needed single-photon detectors (SPDs) are used, which operate in a strongly nonlinear mode, their response being independent of the photon number. Nevertheless, photon-number resolving (PNR) detectors are needed, particularly in quantum optics, where n-photon states are routinely produced. In quantum communication, the PNR functionality is key to many protocols for establishing, swapping and measuring entanglement, and can be used to detect photon-number-splitting attacks. A linear detector with single-photon sensitivity can also be used for measuring a temporal waveform at extremely low light levels, e.g. in long-distance optical communications, fluorescence spectroscopy, optical time-domain reflectometry. We demonstrate here a PNR detector based on parallel superconducting nanowires and capable of counting up to 4 photons at telecommunication wavelengths, with ultralow dark count rate and high counting frequency.

physics.optics↗