arXiv subjects

Francesco Mauri

Publications and source records attributed to Francesco Mauri.

At least 127 records · Page 7Linked to original sources

arXiv2013

Anharmonic properties from a generalized third order ab~initio approach: theory and applications to graphite and graphene

We have implemented a generic method, based on the 2n+1 theorem within density functional perturbation theory, to calculate the anharmonic scattering coefficients among three phonons with arbitrary wavevectors. The method is used to study the phonon broadening in graphite and graphene mono- and bi-layer. The broadening of the high-energy optical branches is highly nonuniform and presents a series of sudden steps and spikes. At finite temperature, the two linearly dispersive acoustic branches TA and LA of graphene have nonzero broadening for small wavevectors. The broadening in graphite and bi-layer graphene is, overall, very similar to the graphene one, the most remarkable feature being the broadening of the quasi acoustical ZO' branch. Finally, we study the intrinsic anharmonic contribution to the thermal conductivity of the three systems, within the single mode relaxation time approximation. We find the conductance to be in good agreement with experimental data for the out-of-plane direction but to underestimate it by a factor 2 in-plane.

cond-mat.mtrl-sci↗

arXiv2012

Zener tunneling in the electrical transport of quasi-metallic carbon nanotubes

We study theoretically the impact of Zener tunneling on the charge-transport properties of quasi-metallic (Qm) carbon nanotubes (characterized by forbidden band gaps of few tens of meV). We also analyze the interplay between Zener tunneling and elastic scattering on defects. To this purpose we use a model based on the master equation for the density matrix, that takes into account the inter-band Zener transitions induced by the electric field (a quantum mechanical effect), the electron-defect scattering and the electron-phonon scattering. In presence of Zener tunnelling the Qm tubes support an electrical current even when the Fermi energy lies in the forbidden band gap. In absence of elastic scattering (in high quality samples), the small size of the band gap of Qm tubes enables Zener tunnelling for realistic values of the the electric field (above $\sim$ 1 V/μm). The presence of a strong elastic scattering (in low quality samples) further decreases the values of the field required to observe Zener tunnelling. Indeed, for elastic-scattering lengths of the order of 50 nm, Zener tunnelling affects the current/voltage characteristic already in the linear regime. In other words, in quasi-metallic tubes, Zener tunneling is made more visible by defects.

cond-mat.mes-hall↗

arXiv2012

Local and non-local electron-phonon couplings in K3Picene and the effect of metallic screening

We analyze the properties of electron-phonon couplings in K3Picene by exploiting a molecular orbital representation derived in the maximally localized Wannier function formalism. This allows us to go beyond the analysis done in Phys. Rev. Lett. 107, 137006 (2011), and separate not only the intra- and intermolecular phonon contributions but also the local and non-local electronic states in the electron-phonon matrix elements. Despite the molecular nature of the crystal, we find that the purely molecular contributions (Holstein-like couplings where the local deformation potential is coupled to intramolecular phonons) account for only 20% of the total electron-phonon interaction lambda. In particular, the Holstein-like contributions to lambda in K3Picene are four times smaller than those computed for an isolated neutral molecule, as they are strongly screened by the metallic bands of the doped crystal. Our findings invalidate the use of molecular electron-phonon calculations to estimate the total electron-phonon coupling in metallic picene, and possibly in other doped metallic molecular crystals. The major contribution (80%) to lambda in K3Picene comes from non-local couplings due to phonon modulated hoppings. We show that the crystal geometry together with the molecular picene structure leads to a strong 1D spatial anisotropy of the non-local couplings. Finally, based on the parameters derived from our density functional theory calculations, we propose a lattice modelization of the electron-phonon couplings in K3Picene which gives 90% of ab-initio lambda.

cond-mat.supr-con↗

arXiv2012

Hidden polymorphs drive the vitrification in B2O3

Understanding the conditions which favor crystallisation or vitrification of liquids has been a long-standing scientific problem. Another connected, and not yet well understood question is the relationship between the glassy and the various possible crystalline forms a system may adopt. In this context, B2O3 is a puzzling case of study since i) it is one of the best glass-forming systems despite an apparent lack of low-pressure polymorphism ii) it vitrifies in a glassy form abnormally different from the only known crystalline phase at ambient pressure iii) it never crystallises from the melt unless pressure is applied, an intriguing behaviour known as the crystallisation anomaly. Here, by means of ab-initio calculations, we discover the existence of novel B2O3 crystalline polymorphs with structural properties similar to the glass and formation energies comparable to the known ambient crystal. The resulting configurational degeneracy drives the system vitrification at ambient pressure. The degeneracy is lifted under pressure, unveiling the origin of the crystallisation anomaly. This work reconciles the behaviour of B2O3 with that from other glassy systems and reaffirms the role played by polymorphism in a system's ability to vitrify. Some of the predicted crystals are cage-like materials entirely made of three-fold rings, opening new perspectives for the synthesis of boron-based nanoporous materials.

cond-mat.mtrl-sci↗

arXiv2011

Intercalant and intermolecular phonon assisted superconductivity in K-doped picene

K$_3$-picene is a superconducting molecular crystal with critical temperature T$_c=7$K or 18K, depending on preparation conditions. Using density functional theory we show that electron-phonon interaction accounts for T$_c ~ 3-8$ K. The average electron-phonon coupling, calculated by including the phonon energy scale in the electron-phonon scattering, is $λ=0.73$ and $ω_{\rm log}=18.0\,$ meV. Intercalant and intermolecular phonon-modes contribute substantially (40%) to $λ$ as also shown by the isotope exponents of potassium (0.19) and carbon (0.31). The relevance of these modes makes superconductivity in K-doped picene peculiar and different from that of fullerenes.

cond-mat.supr-con↗

arXiv2011

How to make graphene superconducting

Graphene is the physical realization of many fundamental concepts and phenomena in solid state-physics, but in the long list of graphene remarkable properties, a fundamental block is missing: superconductivity. Making graphene superconducting is relevant as the easy manipulation of this material by nanolytographic techniques paves the way to nanosquids, one-electron superconductor-quantum dot devices, superconducting transistors at the nano-scale and cryogenic solid-state coolers. Here we explore the doping of graphene by adatoms coverage. We show that the occurrence of superconductivity depends on the adatom in analogy with graphite intercalated compounds (GICs). However, most surprisingly, and contrary to the GIC case, Li covered graphene is superconducting at much higher temperature with respect to Ca covered graphene.

cond-mat.supr-con↗

arXiv2011

Theory of double-resonant Raman spectra in graphene: intensity and line shape of defect-induced and two-phonon bands

We calculate the double resonant (DR) Raman spectrum of graphene, and determine the lines associated to both phonon-defect processes, and two-phonons ones. Phonon and electronic dispersions reproduce calculations based on density functional theory corrected with GW. Electron-light, -phonon, and -defect scattering matrix elements and the electronic linewidth are explicitly calculated. Defect-induced processes are simulated by considering different kind of idealized defects. For an excitation energy of $ε_L=2.4$ eV, the agreement with measurements is very good and calculations reproduce: the relative intensities among phonon-defect or among two-phonon lines; the measured small widths of the D, $D'$, 2D and $2D'$ lines; the line shapes; the presence of small intensity lines in the 1800, 2000 cm$^{-1}$ range. We determine how the spectra depend on the excitation energy, on the light polarization, on the electronic linewidth, on the kind of defects and on their concentration. According to the present findings, the intensity ratio between the $2D'$ and 2D lines can be used to determine experimentally the electronic linewidth. The intensity ratio between the $D$ and $D'$ lines depends on the kind of model defect, suggesting that this ratio could possibly be used to identify the kind of defects present in actual samples. Charged impurities outside the graphene plane provide an almost undetectable contribution to the Raman signal.

cond-mat.mes-hall↗

arXiv2011

Charge density wave and superconducting dome in TiSe2 from electron-phonon interaction

At low temperature TiSe2 undergoes a charge density wave instability. Superconductivity is stabilized either by pressure or by Cu intercalation. We show that the pressure phase diagram of TiSe2 is well described by first-principles calculations. At pressures smaller than 4 GPa charge density wave ordering occurs, in agreement with experiments. At larger pressures the disappearing of the charge density wave is due to a stiffening of the short-range force-constants and not to the variation of nesting with pressure. Finally we show that the behavior of Tc as a function of pressure is entirely determined by the electron-phonon interaction without need of invoking excitonic mechanisms. Our work demonstrates that phase-diagrams with competing orders and a superconducting dome are also obtained in the framework of the electron-phonon interaction.

cond-mat.mtrl-sci↗

arXiv2010

Structure and stability of graphene nanoribbons in oxygen, carbon dioxide, water, and ammonia

We determine, by means of density functional theory, the stability and the structure of graphene nanoribbon (GNR) edges in presence of molecules such as oxygen, water, ammonia, and carbon dioxide. As in the case of hydrogen-terminated nanoribbons, we find that the most stable armchair and zigzag configurations are characterized by a non-metallic/non-magnetic nature, and are compatible with Clar's sextet rules, well known in organic chemistry. In particular, we predict that, at thermodynamic equilibrium, neutral GNRs in oxygen-rich atmosphere should preferentially be along the armchair direction, while water-saturated GNRs should present zigzag edges. Our results promise to be particularly useful to GNRs synthesis, since the most recent and advanced experimental routes are most effective in water and/or ammonia-containing solutions.

cond-mat.mes-hall↗

arXiv2010

Adiabatic and non-adiabatic phonon dispersion in a Wannier function approach

We develop a first-principles scheme to calculate adiabatic and non-adiabatic phonon frequencies in the full Brillouin zone. The method relies on the variational properties of a force-constants functional with respect to the first-order perturbation of the electronic charge density and on the localization of the deformation potential in the Wannier function basis. This allows for calculation of phonon dispersion curves free from convergence issues related to Brillouin zone sampling. In addition our approach justify the use of the static screened potential in the calculation of the phonon linewidth due to decay in electron-hole pairs. We apply the method to the calculation of the phonon dispersion and electron-phonon coupling in MgB$_2$ and CaC$_6$. In both compounds we demonstrate the occurrence of several Kohn anomalies, absent in previous calculations, that are manifest only after careful electron and phonon momentum integration. In MgB$_2$, the presence of Kohn anomalies on the E$_{2g}$ branches improves the agreement with measured phonon spectra and affects the position of the main peak in the Eliashberg function. In CaC$_6$ we show that the non-adiabatic effects on in-plane carbon vibrations are not localized at zone center but are sizable throughout the full Brillouin zone. Our method opens new perspectives in large-scale first-principles calculations of dynamical properties and electron-phonon interaction.

cond-mat.mtrl-sci↗

arXiv2010

Effects of magnetism and doping on the electron-phonon coupling in BaFe$_{2}$As$_{2}$

We calculate the effect of local magnetic moments on the electron-phonon coupling in BaFe$_{2}$As$_{2}+δ$ using the density functional perturbation theory. We show that the magnetism enhances the total electron-phonon coupling by $\sim 50%$, up to $λ\lesssim 0.35$, still not enough to explain the high critical temperature, but strong enough to have a non-negligible effect on superconductivity, for instance, by frustrating the coupling with spin fluctuations and inducing order parameter nodes. The enhancement comes mostly from a renormalization of the electron-phonon matrix elements. We also investigate, in the rigid band approximation, the effect of doping, and find that $λ$ versus doping does not mirror the behavior of the density of states; while the latter decreases upon electron doping, the former does not, and even increases slightly.

cond-mat.supr-con↗

arXiv2010

Doped graphene as tunable electron-phonon coupling material

We present a new way to tune the electron-phonon coupling (EPC) in graphene by changing the deformation potential with electron/hole doping. We show the EPC for highest optical branch at the high symmetry point K, acquires a strong dependency on the doping level due to electron-electron correlation not accounted in mean-field approaches. Such a dependency influences the dispersion (with respect to the laser energy) of the Raman D and 2D lines and the splitting of the 2D peak in multi-layer graphene. Finally this doping dependence opens the possibility to construct tunable electronic devices through the external control of the EPC.

cond-mat.mtrl-sci↗

arXiv2010

Clar's Theory, STM Images, and Geometry of Graphene Nanoribbons

We show that Clar's theory of the aromatic sextet is a simple and powerful tool to predict the stability, the π-electron distribution, the geometry, the electronic/magnetic structure of graphene nanoribbons with different hydrogen edge terminations. We use density functional theory to obtain the equilibrium atomic positions, simulated scanning tunneling microscopy (STM) images, edge energies, band gaps, and edge-induced strains of graphene ribbons that we analyze in terms of Clar formulas. Based on their Clar representation, we propose a classification scheme for graphene ribbons that groups configurations with similar bond length alternations, STM patterns, and Raman spectra. Our simulations show how STM images and Raman spectra can be used to identify the type of edge termination.

cond-mat.mtrl-sci↗

arXiv2010

Current-voltage characteristics of graphene devices: interplay between Zener-Klein tunneling and defects

We report a theoretical/experimental study of current-voltage characteristics (I-V) of graphene devices near the Dirac point. The I-V can be described by a power law (I \propto V^α, with 1< α<= 1.5). The exponent is higher when the mobility is lower. This superlinear I-V is interpreted in terms of the interplay between Zener-Klein transport, that is tunneling between different energy bands, and defect scattering. Surprisingly, the Zener-Klein tunneling is made visible by the presence of defects.

cond-mat.mtrl-sci↗

arXiv2010

Phonon dispersion and low energy anomaly in CaC$_6$

We report measurements of phonon dispersion in CaC$_6$ using inelastic X-ray and neutron scattering. We find good overall agreement, particularly in the 50 meV energy region, between experimental data and first-principles density-functional-theory calculations. However, on the longitudinal dispersion along the $(1 1 1)$ axis of the rhombohedral representation, we find an unexpected anti-crossing with an additional longitudinal mode, at about 11 meV. At a comparable energy, we observe also unexpected intensity on the in-plane direction. These results resolve the previous incorrect assignment of a longitudinal phonon mode to a transverse mode in the same energy range. By calculating the electron susceptibility from first principles we show that this longitudinal excitation is unlikely to be due to a plasmon and consequently can probably be due to defects or vacancies present in the sample.

cond-mat.supr-con↗

arXiv2010

First-principles theory of the orbital magnetization

We compute the orbital magnetization in real materials by evaluating a recently discovered formula for periodic systems, within density functional theory. We obtain improved values of the orbital magnetization in the ferromagnetic metals Fe, Co, and Ni, by taking into account the contribution of the interstitial regions neglected so far in literature. We also use the orbital magnetization to compute the EPR $g$-tensor in molecules and solids. The present approach reproduces the $g$-tensor obtained by linear response (LR), when the spin-orbit can be treated as a perturbation. However, it can also be applied to radicals and defects with an orbital-degenerate ground-state or containing heavy atoms, that can not be properly described by LR.

cond-mat.mtrl-sci↗

arXiv2009

Effect of dimensionality on the charge-density-wave in few-layers 2H-NbSe$_2$

We investigate the charge density wave (CDW) instability in single and double layers, as well as in the bulk 2H-NbSe$_{2}$. We demonstrate that the density functional theory correctly describes the metallic CDW state in the bulk 2H-NbSe$_{2}$. We predict that both mono- and bilayer NbSe$_{2}$ undergo a CDW instability. However, while in the bulk the instability occurs at a momentum $\mathbf{q}_{CDW}\approx{2/3}\mathbf{ΓM}$, in free-standing layers it occurs at $\mathbf{q}_{CDW}\approx{1/2}\mathbf{ΓM}$. Furthermore, while in the bulk the CDW leads to a metallic state, in a monolayer the ground state becomes semimetallic, in agreement with recent experimental data. We elucidate the key role that an enhancement of the electron-phonon matrix element at $\mathbf{q}\approx\mathbf{q}_{CDW}$ plays in forming the CDW ground state.

cond-mat.mtrl-sci↗

arXiv2009

Raman spectra of bilayer graphene to probe the electrostatic environment

The Raman shift, broadening, and relative Raman intensities of bilayer graphene are computed as functions of the electron concentration. We include dynamic effects for the phonon frequencies and we consider the gap induced in the band structure of bilayer graphene by an external electric field. We show that from the analysis of the Raman spectra of gated bilayer graphene it is possible to quantitatively identify the amount of charges coming from the atmosphere and from the substrate. These findings suggest that Raman spectroscopy of bilayer graphene can be used to characterize the electrostatic environment of few-layers graphene.

cond-mat.mtrl-sci↗