SearcharxivSearch

arXiv subjects

Francesco Verde

Publications and source records attributed to Francesco Verde.

At least 19 recordsLinked to original sources

Unsupervised Learning for Scalable Downlink Power Control in Cell-Free Massive MIMO

In cell-free massive multiple-input multiple-output systems, downlink power control is essential to ensure uniformly high service quality across users. Existing methods range from centralized iterative approaches requiring global channel knowledge and supervised training, to simpler distributed strategies such as fractional power control that rely on local information but perform poorly in terms of fairness. This letter proposes an unsupervised, physics-informed framework that directly optimizes max-min fairness without requiring optimal labels or user position information. The method is inherently scalable in the number of user equipment, does not require retraining when the user population changes, and can be extended to achieve full scalability with respect to both access points and users. Numerical results show that it nearly doubles the worst-user spectral efficiency compared to existing scalable schemes.

eess.SP

A Robust Two-Stage Protocol for STAR-RIS-Aided ISAC Networks: Joint Beamforming and Mode Optimization

This paper investigates the robust design of integrated sensing and communication (ISAC) systems assisted by simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RISs), acting as programmable metasurfaces enabling concurrent sensing and communication over the full space. To exploit the dual transmission-reflection capability of STAR-RISs, we propose a two-stage ISAC protocol: a preparation phase jointly performs direction-of-arrival (DoA) estimation for outdoor users and downlink communication to all users, while a subsequent communication phase leverages the acquired angular information to enhance downlink transmission. To capture sensing uncertainty and imperfect channel knowledge, the DoAs of outdoor users are modeled as Gaussian random variables, and the non-line-of-sight (NLoS) channel components of outdoor links are characterized through their spatial covariance statistics, enabling a robust design that incorporates average communication performance into the optimization. We formulate a performance-balanced optimization problem that maximizes the communication sum-rate while guaranteeing sensing accuracy, jointly determining the beamforming vectors, the STAR-RIS transmission and reflection coefficients in both stages, and the metasurface partition between energy-splitting and transmit-only modes. To address the resulting non-convex mixed discrete-continuous problem, we develop a tailored alternating optimization framework with proven monotonic convergence. Numerical results demonstrate approximately 15% throughput gain over the most competitive benchmark neglecting NLoS statistical characterization, with robustness maintained under DoA estimation errors and imperfect NLoS channel knowledge.

eess.SP

Gridless Full-Space DOA Estimation for STAR-RIS-Assisted Wireless Systems

Simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RIS) enable full-space ($0^\circ$--$360^\circ$) signal coverage, making them a compelling platform for integrated sensing and communication in next-generation wireless networks. In this paper, we investigate gridless direction-of-arrival (DOA) estimation across the full spatial domain in STAR-RIS-assisted systems operating with a single RF sensing chain. We show that the coupled reflection-transmission mechanism of STAR-RIS induces a multichannel finite-rate-of-innovation (FRI) structure in the received signal, which enables casting DOA estimation as a structured low-rank recovery problem without angular grid discretization. Building on this observation, we develop a proximal gradient descent algorithm with alternating projections onto a block-Hankel matrix set, enabling robust angle retrieval from limited measurements. Two practically relevant STAR-RIS configurations are addressed: element-wise uniform and nonuniform energy-splitting designs, each handled through a dedicated lifting strategy that preserves the underlying algebraic structure. A Ziv-Zakai bound is derived for the coupled full-space sensing model as a performance benchmark across the full SNR range. Numerical results show that the proposed methods consistently outperform grid-based baselines, achieving sub-degree accuracy within $\pm 60^\circ$ of boresight at comparable or lower computational cost.

eess.SP

Optimal transmit field distribution for partially obstructed continuous radiating surfaces in near-field communication systems

This paper deals with the optimal synthesis of aperture fields for (radiating) near-field communications in obstructed environments. A physically consistent model based on knife-edge diffraction is used to formulate the problem as a maximization in Hilbert space. The optimal solution is obtained as a matched filter that ``matches" the shape of a diffraction-induced kernel, thus linking wave propagation with signal processing methods. The framework supports hardware implementation using continuous apertures such as metasurfaces or lens antennas. This approach bridges physically grounded modeling, signal processing, and hardware design for efficient energy focusing in near-field obstructed channels.

eess.SP

Randomized Space-Time Stacked Intelligent Metasurfaces for Massive Multiuser Downlink Connectivity

Stacked intelligent metasurfaces (SIMs) represent a key enabler for next-generation wireless networks, offering beamforming gains while significantly reducing radio-frequency chain requirements. In conventional space-only SIM architectures, the rate of reconfigurability of the SIM is equal to the inverse of the channel coherence time. This paper investigates a novel beamforming strategy for massive downlink connectivity using a randomized space-time (ST) coded SIM. In addition to conventional space-only metasurface layers, the proposed design integrates a ST metasurface layer at the input stage of the SIM that introduces random time variations over each channel coherence time interval. These artificial time variations enable opportunistic user scheduling and exploitation of multiuser diversity under slow channel dynamics. To mitigate the prohibitive overhead associated with full channel state information at the transmitter (CSIT), we propose a partial-CSIT-based beamforming scheme that leverages randomized steering vectors and limited user-side feedback based on signal quality measurements. Numerical results demonstrate that the proposed ST-SIM architecture achieves satisfactory sum-rate performance while significantly reducing CSIT acquisition and feedback overhead, thereby enabling scalable downlink connectivity in dense networks.

eess.SP

Airy beams for radiative near-field communications: Fundamentals, potentials, and limitations

In next-generation wireless networks, the combination of electrically large radiating apertures and high-frequency transmission extends the radiating near-field region around the transmitter. In this region, unlike in the far field, the wavefront is nonplanar, which provides additional degrees of freedom to shape and steer the transmitted beam in a desired manner. In this paper, we focus on Airy beams, which may exhibit several highly desirable properties in the near-field region. Ideally, these beams follow self-accelerating (curved) trajectories, demonstrate resilience to perturbations through self-healing, and maintain a consistent intensity profile across all planes perpendicular to the propagation direction, making them effectively diffraction-free. Specifically, we first present the underlying principles of self-accelerating beams radiated by continuous aperture field distributions. We then address several challenges regarding the generation of Airy beams, including their exponential decay due to finite energy constraints and spatial truncation of the aperture. Moreover, we examine their free-space propagation characteristics. The second part of the paper focuses on the propagation behavior of Airy beams in non-line-of-sight (NLoS) scenarios. A comparison is also presented between Airy beams and Gaussian beams. Our theoretical and numerical results show that Airy beams may offer a performance advantage over Gaussian beams in certain NLoS channels, provided that their key properties are largely preserved, specifically, self-acceleration along a parabolic trajectory and diffraction-free propagation. In the presence of an obstacle, this requires that the portion of the transmit aperture with a clear line-of-sight to the receiver is sufficiently large.

eess.SP

Design of stacked intelligent metasurfaces with reconfigurable amplitude and phase for multiuser downlink beamforming

A novel technology based on stacked intelligent metasurfaces (SIM) has recently emerged. This platform involves cascading multiple metasurfaces, each acting as a digitally programmable physical layer within a diffractive neural network. SIM enable the implementation of signal-processing transformations directly in the electromagnetic wave domain, eliminating the need for expensive, high-precision, and power-intensive digital platforms. However, existing studies employing SIM in wireless communication applications rely solely on nearly passive structures that control only the phase of the meta-atoms in each layer. In this study, we propose a SIM-aided downlink multiuser transmission scheme, where the SIM at the base station (BS) end is designed by combining nearly passive layers with phase-only reconfiguration capabilities and active layers integrated with amplifier chips to enable amplitude control. Our optimal design aims at maximizing the sum rate for the best group of users by jointly optimizing the transmit power allocation at the BS and the wave-based beamforming at the SIM. In addition to the standard sum-power constraint at the BS, our optimization framework includes two additional constraints: (i) a per-stream power preserving constraint to prevent propagation losses across the SIM, and (ii) an amplitude constraint to account for power limitations for each active layer. To further reduce the complexity of the optimal beamforming solution, we explore a simple yet suboptimal zero-forcing (ZF) beamforming design, where the wave-based transformation implemented by the SIM is selected to eliminate interference among user streams. Finally, extensive Monte Carlo simulations demonstrate that incorporating both nearly passive and active layers within the SIM significantly enhances capacity compared to previously reported phase-only coding SIM.

eess.SP

Integrating sensing and communications: Simultaneously transmitting and reflecting digital coding metasurfaces

Wireless networks are undergoing a transformative shift, driven by the crucial factors of cost effectiveness and sustainability. Digital coding metasurfaces (DCMs) might play a key role in realizing cost-effective digital modulators by harnessing energy embedded in electromagnetic waves traversing through the air. Integrated sensing and communication (ISAC) optimize power and spectral resources by combining sensing and communication functionalities on a shared hardware platform. This article presents a tutorial-style overview of the applications and advantages of DCMs in ISAC-based networks. Emphasis is placed on the dual-functionality of ISAC, necessitating the design of DCMs with simultaneously transmitting and reflecting (STAR) capabilities for comprehensive space control. Additionally, the article explores key signal processing challenges and outlines future research directions stemming from the convergence of ISAC and emerging STAR-DCM technologies.

eess.SP

A Hybrid NOMA-OMA Scheme for Inter-plane Intersatellite Communications in Massive LEO Constellations

Communication between satellites in low-Earth orbit (LEO) constellations takes place through inter-satellite links (ISLs). Unlike intra-plane ISLs, which interconnect satellites belonging to the same orbital plane with fixed relative distance, inter-plane ISLs experience significant Doppler frequency shifts, since satellites belonging to different orbital planes exhibit timevarying relative distance (required, e.g., to minimize the risk of physical collisions between satellites). In this paper, we consider the problem of connecting multiple satellites, belonging to a massive LEO constellation, to a receiving satellite, referred to as the sink. Specifically, we consider a hybrid multiple access scheme, which employs a combination of non-orthogonal multiple access (NOMA), where radio-frequency ISLs share the same time-frequency resource blocks, and orthogonal multiple access (OMA), where ISLs employ orthogonal resource blocks. The set of satellites transmitting towards the sink is divided into groups, where NOMA is employed within each group, whereas OMA is used to separate different groups. Such a scheme subsumes as special cases both pure-OMA and pure-NOMA. Our study highlights that similar Doppler frequency shifts have a significant impact on the individual rates of the satellites in a pure-NOMA scheme, thus reducing the network fairness of this technique. Motivated by such a fact, we develop design strategies of the proposed hybrid NOMA-OMA scheme, which exploit inter-plane Doppler frequency diversity to enhance fairness among the satellites, while ensuring a significantly higher sumrate capacity compared to the pure-OMA technique. Numerical results corroborate our theoretical analysis, by demonstrating both the fairness enhancement of the proposed techniques over the pure-NOMA scheme, as well as their capacity improvement over the pure-OMA one.

eess.SP

On the Capacity of Opportunistic Time-Sharing Downlink with a Reconfigurable Intelligent Surface

We provide accurate approximations of the sum-rate capacity of an opportunistic time-sharing downlink, when a reconfigurable intelligent surface (RIS) assists the transmission from a single-antenna base station (BS) to single-antenna user equipments (UEs). We consider the fading effects of both the direct (i.e., BS-to-UEs) and reflection (i.e, BS-to-RIS-to-UEs) links, by developing two approximations: the former one is based on hardening of the reflection channel for large values of the number of meta-atoms; the latter one relies on the distribution of the sum of Nakagami variates and does not require channel hardening. Our derivations show the dependence of the sum-rate capacity as a function of both the number of users and the number of meta-atoms, as well as to establish a comparison with a downlink without an RIS. Numerical results corroborate the accuracy and validity of the mathematical analysis.

cs.IT

Rapidly time-varying reconfigurable intelligent surfaces for downlink multiuser transmissions

Until now, researchers in wireless communications have mainly focused their attention on slowly time-varying designs of reconfigurable intelligent surfaces (RISs), where the spatial-phase gradient across the RIS is varied at the rate equal to the inverse of the channel coherence time. Additional degrees of freedom for controlling EM waves can be gained by applying a time modulation to the reflection response of RISs during the channel coherence time interval, thereby attaining rapidly time-varying RISs. In this paper, we develop a general framework where a downlink multiuser transmission over single-input single-output slow fading channels is assisted by a digitally controlled rapidly time-varying RIS. We show that reconfiguring the RIS at a rate greater than the inverse of the channel coherence time might be beneficial from a communication perspective depending on the considered network utility function and the available channel state information at the transmitter (CSIT). The conclusions of our analysis in terms of system design guidelines are as follows: (i) if the network utility function is the sum-rate time-averaged network capacity, without any constraint on fair resource allocation, and full CSIT is available, it is unnecessary to change the electronic properties of the RIS within the channel coherence time interval; (ii) if partial CSIT is assumed only, a rapidly time-varying randomized RIS allows to achieve a suitable balance between sum-rate time-averaged capacity and user fairness, especially for a sufficiently large number of users; (iii) regardless of the available amount of CSIT, the design of rapid temporal variations across the RIS is instrumental for developing scheduling algorithms aimed at maximizing the network capacity subject to some fairness constraints.

eess.SP

Visible light backscattering with applications to the Internet of Things: State-of-the-art, challenges, and opportunities

Visible light backscatter (VLB) is an innovative optical transmission paradigm to enable ultra low-power passive communication and localization for the Internet of Things (IoT), by overcoming some of the limitations of conventional (i.e., active) visible light communication (VLC) as well as active/passive radio-frequency (RF) technologies. In this paper, we provide a comprehensive survey of recent research activities in the VLB field. After describing the principles of operation and the main enabling technologies, we classify the existing VLB techniques according to several features, discussing their merits and limitations. Moreover, we introduce the potential applications of VLB techniques in several IoT domains. Finally, we present the main open challenges in this area and delineate a number of future research directions

eess.SP

Detection and blind channel estimation for UAV-aided wireless sensor networks in smart cities under mobile jamming attack

Unmanned aerial vehicles (UAVs) can be integrated into wireless sensor networks (WSNs) for smart city applications in several ways. Among them, a UAV can be employed as a relay in a "store-carry and forward" fashion by uploading data from ground sensors and metering devices and, then, downloading it to a central unit. However, both the uploading and downloading phases can be prone to potential threats and attacks. As a legacy from traditional wireless networks, the jamming attack is still one of the major and serious threats to UAV-aided communications, especially when also the jammer is mobile, e.g., it is mounted on a UAV or inside a terrestrial vehicle. In this paper, we investigate anti-jamming communications for UAV-aided WSNs operating over doubly-selective channels in the downloading phase. In such a scenario, the signals transmitted by the UAV and the malicious mobile jammer undergo both time dispersion due to multipath propagation effects and frequency dispersion caused by their mobility. To suppress high-power jamming signals, we propose a blind physical-layer technique that jointly detects the UAV and jammer symbols through serial disturbance cancellation based on symbol-level post-sorting of the detector output. Amplitudes, phases, time delays, and Doppler shifts - required to implement the proposed detection strategy - are blindly estimated from data through the use of algorithms that exploit the almost-cyclostationarity properties of the received signal and the detailed structure of multicarrier modulation format. Simulation results corroborate the anti-jamming capabilities of the proposed method, for different mobility scenarios of the jammer.

eess.SP

Anti-jamming beam alignment in millimeter-wave MIMO systems

In millimeter-wave (MMW) multiple-input multiple-output (MIMO) communications, users and their corresponding base station (BS) have to align their beam during both initial access and data transmissions to compensate for the high propagation loss. The beam alignment (BA) procedure specified for 5th Generation (5G) New Radio (NR) has been designed to be fast and precise in the presence of non-malicious interference and noise. A smart jammer might exploit this weakness and may launch an attack during the BA phase in order to degrade the accuracy of beam selection and, thus, adversely impacting the end-to-end performance and quality-of-service experienced by the users. In this paper, we study the effects of a jamming attack at MMW frequencies during the BA procedure used to perform initial access for idle users and adaptation/recovery for connected users. We show that the BA procedure adopted in 5G NR is extremely vulnerable to a smart jamming attack and, consequently, we propose a countermeasure based on the idea of randomized probing, which consists of randomly corrupting the probing sequence transmitted by the BS in order to reject the jamming signal at the UE via a subspace-based technique based on orthogonal projections and jamming cancellation. Numerical results corroborate our theoretical findings and show the very satisfactory accuracy of the proposed anti-jamming approach.

eess.SP

Channel State Acquisition in Uplink NOMA for Cellular-Connected UAV: Exploitation of Doppler and Modulation Diversities

Integration of unmanned aerial vehicles (UAVs) for surveillance or monitoring applications into fifth generation (5G) New Radio (NR) cellular networks is an intriguing problem that has recently tackled a lot of interest in both academia and industry. For an efficient spectrum usage, we consider a recently-proposed sky-ground nonorthogonal multiple access (NOMA) scheme, where a cellular-connected UAV acting as aerial user (AU) and a static terrestrial user (TU) are paired to simultaneously transmit their uplink signals to a base station (BS) in the same time-frequency resource blocks. In such a case, due to the highly dynamic nature of the UAV, the signal transmitted by the AU experiences both time dispersion due to multipath propagation effects and frequency dispersion caused by Doppler shifts. On the other hand, for a static ground network, frequency dispersion of the signal transmitted by the TU is negligible and only multipath effects have to be taken into account. To decode the superposed signals at the BS through successive interference cancellation, accurate estimates of both the AU and TU channels are needed. In this paper, we propose channel estimation procedures that suitably exploit the different circular/noncircular modulation formats (modulation diversity) and the different almost-cyclostationarity features (Doppler diversity) of the AU and TU by means of widely-linear time-varying processing. Our estimation approach is semi-blind since Doppler shifts and time delays of the AU are estimated based on the received data only, whereas the remaining relevant parameters of the AU and TU channels are acquired relying also on the available training symbols, which are transmitted by the AU and TU in a nonorthogonal manner.

eess.SP

Separable MSE-based design of two-way multiple-relay cooperative MIMO 5G networks

While the combination of multi-antenna and relaying techniques has been extensively studied for Long Term Evolution Advanced (LTE-A) and Internet of Things (IoT) applications, it is expected to still play an important role in 5th Generation (5G) networks. However, the expected benefits of these technologies cannot be achieved without a proper system design. In this paper, we consider the problem of jointly optimizing terminal precoders/decoders and relay forwarding matrices on the basis of the sum mean square error (MSE) criterion in multiple-input multiple-output (MIMO) two-way relay systems, where two multi-antenna nodes mutually exchange information via multi-antenna amplify-and-forward relays. This problem is nonconvex and a local optimal solution is typically found by using iterative algorithms based on alternating optimization. We show how the constrained minimization of the sum-MSE can be relaxed to obtain two separated subproblems which, under mild conditions, admit a closed-form solution. Compared to iterative approaches, the proposed design is more suited to be integrated in 5G networks, since it is computationally more convenient and its performance exhibits a better scaling in the number of relays.

eess.SP

Sensing Technologies for Crowd Management, Adaptation, and Information Dissemination in Public Transportation Systems: A Review

Management of crowd information in public transportation (PT) systems is crucial, both to foster sustainable mobility, by increasing the user's comfort and satisfaction during normal operation, as well as to cope with emergency situations, such as pandemic crises, as recently experienced with COVID-19 limitations. This paper presents a taxonomy and review of sensing technologies based on Internet of Things (IoT) for real-time crowd analysis, which can be adopted in the different segments of the PT system (buses/trams/trains, railway/metro stations, and bus/tram stops). To discuss such technologies in a clear systematic perspective, we introduce a reference architecture for crowd management, which employs modern information and communication technologies (ICT) in order to: (i) monitor and predict crowding events; (ii) implement crowd-aware policies for real-time and adaptive operation control in intelligent transportation systems (ITSs); (iii) inform in real-time the users of the crowding status of the PT system, by means of electronic displays installed inside vehicles or at bus/tram stops/stations, and/or by mobile transport applications. It is envisioned that the innovative crowd management functionalities enabled by ICT/IoT sensing technologies can be incrementally implemented as an add-on to state-of-the-art ITS platforms, which are already in use by major PT companies operating in urban areas. Moreover, it is argued that, in this new framework, additional services can be delivered to the passengers, such as, e.g., on-line ticketing, vehicle access control and reservation in severely crowded situations, and evolved crowd-aware route planning.

cs.CY

On the design of multiple-relay cooperative MIMO networks with partial channel state information

This paper deals with the problem of jointly designing the source precoder, the relaying matrices, and the destination equalizer in a multiple-relay amplify-and-forward (AF) cooperative multiple-input multiple-output (MIMO) wireless network, when partial channel-state information (CSI) is available. Specifically, the considered approaches are based on the knowledge of instantaneous CSI of the first-hop channel matrix, whereas only statistical CSI of the second-hop channels is assumed. In such a scenario, with respect to the case when instantaneous CSI of both the first- and second-hop MIMO channel matrices is exploited, existing network designs exhibit a significant performance degradation. Relying on a relaxed minimum-mean-square-error (MMSE) criterion, we show that the design based on the potential activation of all possible antennas for all available AF relays leads to a mathematically intractable optimization problem. Therefore, we develop a joint relay-and-antenna selection procedure that determines the best subset of the available antennas possibly belonging to different relays. Monte Carlo simulations show that, compared to designs based on the selection of the best relay, the proposed strategy offers a significant performance gain, by also outperforming other recently proposed relay/antenna selection schemes.

eess.SP