Searcharxiv⌕ Search

arXiv subjects

Francesco dell'Isola

Publications and source records attributed to Francesco dell'Isola.

13 recordsLinked to original sources

On the synthesis of complete two-dimensional second-gradient continua: Tri-pantographic fabrics

We introduce a notion of completeness for two-dimensional second-gradient elastic continua and propose a microstructural route toward its synthesis. A continuum is said to be complete if the Hessian of the stored energy with respect to the second-gradient variable is locally positive definite, so that every nonzero admissible increment of the placement second gradient is quadratically controlled in the highest-order part of the energy about each configuration. Starting from the Principle of Virtual Work, we derive the constitutive relations, equilibrium equations, and admissible boundary interactions for a broad class of fibrous second-gradient continua whose stored energies depend on fiber stretch, stretch gradients, and curvature. The theory is then applied to several continua motivated by pantographic microstructures. Classical pantographic sheets are shown to be incomplete, while bi-pantographic fabrics enlarge the class of components of the second gradient detected by the energy but remain incomplete. Finally, we formulate a tri-pantographic continuum associated with a proposed three-family architecture and prove that it is complete. The examples illustrate how microstructural architecture influences both the completeness properties of an effective continuum and the pointwise form of its higher-order boundary interactions.

math-ph↗

Balance laws versus the Principle of Virtual Work and the limited scope of Noll's theorem

The relationship between balance laws and the Principle of Virtual Work as well as the structure of contact interactions in continua remain foundational issues in Mechanics. In this work, we revisit these issues within the distributional framework emphasized by Paul Germain. We show that while the Principle of Virtual Work implies balance of forces and moments for $n$th-gradient continua, balance laws alone do not suffice to characterize equilibrium for $n \geq 2$. We then reexamine Noll's classical theorem asserting that surface contact forces depend solely on the unit normal to the surface and identify the precise role of his additional assumptions, namely the absence of edge and wedge contact interactions and the boundedness of the surface contact density on the space of oriented surfaces. We demonstrate that these hypotheses fail for general higher-gradient continua. Consequently, the presence of curvature-dependent surface contact forces in such materials does not conflict with Noll's theorem and refutes his claim of their nonexistence.

physics.class-ph↗

Status of the GINGER project

Large frame Ring laser gyroscopes, based on the Sagnac effect, are top sensitivity instrumentation to measure angular velocity with respect to the fixed stars. GINGER (Gyroscopes IN GEneral Relativity) project foresees the construction of an array of three large dimension ring laser gyroscopes, rigidly connected to the Earth. GINGER has the potentiality to measure general relativity effects and Lorentz Violation in the gravity sector, once a sensitivity of $10^{-9}$, or better, of the Earth rotation rate is obtained. Being attached to the Earth crust, the array will also provide useful data for geophysical investigation. For this purpose, it is at present under construction as part of the multi-components observatory called Underground Geophysics at Gran Sasso (UGSS). Sensitivity is the key point to determine the relevance of this instrument for fundamental science. The most recent progress in the sensitivity measurement, obtained on a ring laser prototype called GINGERINO, indicates that GINGER should reach the level of 1 part in $10^{11}$ of the Earth rotation rate.

gr-qc↗

Equilibria of a clamped Euler beam (Elastica) with distributed load: large deformations

We present some novel equilibrium shapes of a clamped Euler beam (Elastica from now on) under uniformly distributed dead load orthogonal to the straight reference configuration. We characterize the properties of the minimizers of total energy, determine the corresponding Euler-Lagrange conditions and prove, by means of direct methods of calculus of variations, the existence of curled local minimizers. Moreover, we prove some sufficient conditions for stability and instability of particular solutions of the Euler-Lagrange conditions that can be applied to numerically found curled shapes.

math-ph↗

Macroscopic description of microscopically strongly inhomogenous systems: A mathematical basis for the synthesis of higher gradients metamaterials

We consider the time evolution of a one dimensional $n$-gradient continuum. Our aim is to construct and analyze discrete approximations in terms of physically realizable mechanical systems, called microscopic because they are living on a smaller space scale. We validate our construction by proving a convergence theorem of the microscopic system to the given continuum, as the scale parameter goes to zero.

math-ph↗

At the origins and in the vanguard of peri-dynamics, non-local and higher gradient continuum mechanics. An underestimated and still topical contribution of Gabrio Piola

Gabrio Piola's scientific papers have been underestimated in the mathematical-physics literature. Indeed a careful reading of them proves that they are original, deep and far reaching. Actually -even if his contribution to mechanical sciences is not completely ignored- one can undoubtedly say that the greatest part of his novel contributions to mechanics, although having provided a great impetus and substantial influence on the work of many preminent mechanicians, is in fact generally ignored. It has to be remarked that authors [10] dedicated many efforts to the aim of unveiling the true value of Gabrio Piola as a scientist; however, some deep parts of his scientific results remain not yet sufficiently illustrated. Our aim is to prove that non-local and higher gradient continuum mechanics was conceived already in Piola's works and to try to explain the reasons of the unfortunate circumstance which caused the erasure of the memory of this aspect of Piola's contribution. Some relevant differential relationships obtained in Piola [Piola, 1845-6] are carefully discussed, as they are still nowadays too often ignored in the continuum mechanics literature and can be considered the starting point of Levi-Civita's theory of Connection for Riemannian manifolds.

math.HO↗

Second gradient poromechanics

Second gradient theories have been developed in mechanics for treating different phenomena as capillarity in fluids, plasticity and friction in granular materials or shear band deformations. Here, there is an attempt of formulating a second gradient Biot like model for porous materials. In particular the interest is focused in describing the local dilatant behaviour of a porous material induced by pore opening elastic and capillary interaction phenomena among neighbouring pores and related micro-filtration phenomena by means of a continuum microstructured model. The main idea is to extend the classical macroscopic Biot model by including in the description second gradient effects. This is done by assuming that the surface contribution to the external work rate functional depends on the normal derivative of the velocity or equivalently assuming that the strain work rate functional depends on the porosity and strain gradients. According to classical thermodynamics suitable restrictions for stresses and second gradient internal actions (hyperstresses) are recovered, so as to determine a suitable extended form of the constitutive relation and Darcy's law. Finally a numerical application of the envisaged model to one-dimensional consolidation is developed; the obtained results generalize those by Terzaghi; in particular interesting phenomena occurring close to the consolidation external surface and the impermeable wall can be described, which were not accounted for previously.

physics.class-ph↗

A low-power circuit for piezoelectric vibration control by synchronized switching on voltage sources

In the paper, a vibration damping system powered by harvested energy with implementation of the so-called SSDV (synchronized switch damping on voltage source) technique is designed and investigated. In the semi-passive approach, the piezoelectric element is intermittently switched from open-circuit to specific impedance synchronously with the structural vibration. Due to this switching procedure, a phase difference appears between the strain induced by vibration and the resulting voltage, thus creating energy dissipation. By supplying the energy collected from the piezoelectric materials to the switching circuit, a new low-power device using the SSDV technique is proposed. Compared with the original self-powered SSDI (synchronized switch damping on inductor), such a device can significantly improve its performance of vibration control. Its effectiveness in the single-mode resonant damping of a composite beam is validated by the experimental results.

physics.class-ph↗

A Variational Deduction of Second Gradient Poroelasticity Part I: General Theory

Second gradient theories have to be used to capture how local micro heterogeneities macroscopically affect the behavior of a continuum. In this paper a configurational space for a solid matrix filled by an unknown amount of fluid is introduced. The Euler-Lagrange equations valid for second gradient poromechanics, generalizing those due to Biot, are deduced by means of a Lagrangian variational formulation. Starting from a generalized Clausius-Duhem inequality, valid in the framework of second gradient theories, the existence of a macroscopic solid skeleton Lagrangian deformation energy, depending on the solid strain and the Lagrangian fluid mass density as well as on their Lagrangian gradients, is proven.

math-ph↗

A Variational Deduction of Second Gradient Poroelasticity II: An Application to the Consolidation Problem

The second gradient model of poromechanics, introduced in Part I, is here linearized in the neighborhood of a prestressed reference configuration to be applied to the one-dimensional consolidation problem originally considered by Terzaghi and Biot. Second gradient models allow for the description of boundary layer effects both in the vicinity of the external surface and the impermeable wall. The formulated differential problem involves linear pencils of ordinary differential operators on a finite interval, with boundary conditions depending on the spectral parameter. Taking into account the dependence of the differential problem on initial stresses a linear stability analysis is carried out. Finally,numerical solutions are compared with the corresponding classical Terzaghi solutions.

math-ph↗

A solid-fluid mixture model allowing for solid dilatation under external pressure

A sponge subjected to an increase of the outside fluid pressure expands its volume but nearly mantains its true density and thus gives way to an increase of the interstitial volume. This behaviour, not yet properly described by solid-fluid mixture theories, is studied here by using the Principle of Virtual Power with the most simple dependence of the free energy as a function of the partial apparent densities of the solid and the fluid. The model is capable of accounting for the above mentioned dilatational behaviour, but in order to isolate its essential features more clearly we compromise on the other aspects of deformation.

physics.class-ph↗

The influence of the curvature dependence of the surface tension on the geometry of electrically charged menisci

We evaluate how the curvature dependence of surface tension affects the shape of electrically charged interfaces between a perfectly conducting fluid and its vapour. We consider two cases: i) spherical droplets in equilibrium with their vapour; ii) menisci pending in a capillary tube in presence of a conducting plate at given electric potential drop. Tolman-like dependence of surface tension on curvature becomes important when the "nucleation radius" is comparable with the interface curvature radius. In case i) we prove existence of the equilibrium minimal radius and estimate its dependence on the electric field and Tolmanlike curvature effects. In case ii) the menisci are subject to the gravitational force, surface tension and electrostatic fields We determine the unknown surface of the menisci to which the potential is assigned using an iterative numerical method and show that Tolman-like corrections imply: 1) a variation of the height (up to 10% in some cases) of the tip of the menisci; 2) a decrease of the maximum electrical potential applicable to the menisci before their breakdown amounting to 40V over 800V in the considered cases. We conjecture that these effects could be used in new experiments based on electric measurements to determine the dependence of the equilibrium surface tension on curvature

math-ph↗

Vibration control in plates by uniformly distributed PZT actuators interconnected via electric networks

In this paper a novel device aimed at controlling the mechanical vibrations of plates by means of a set of electrically-interconnected piezoelectric actuators is described. The actuators are embedded uniformly in the plate wherein they connect every node of an electric network to ground, thus playing the two-fold role of capacitive element in the electric network and of couple suppliers. A mathematical model is introduced to describe the propagation of electro-mechanical waves in the device; its validity is restricted to the case of wave-forms with wave-length greater than the dimension of the piezoelectric actuators used. A self-resonance criterion is established which assures the possibility of electro-mechanical energy exchange. Finally the problem of vibration control in simply supported and clamped plates is addressed; the optimal net-impedance is determined. The results indicate that the proposed device can improve the performances of piezoelectric actuation

math-ph↗