Searcharxiv⌕ Search

arXiv subjects

Francisco Prada

Publications and source records attributed to Francisco Prada.

At least 109 records · Page 6Linked to original sources

GTC Follow-up Observations of Very Metal-Poor Star Candidates from DESI

The observations from the Dark Energy Spectroscopic Instrument (DESI) will significantly increase the numbers of known extremely metal-poor stars by a factor of ~ 10, improving the sample statistics to study the early chemical evolution of the Milky Way and the nature of the first stars. In this paper we report high signal-to-noise follow-up observations of 9 metal-poor stars identified during the DESI commissioning with the Optical System for Imaging and low-Intermediate-Resolution Integrated Spectroscopy (OSIRIS) instrument on the 10.4m Gran Telescopio Canarias (GTC). The analysis of the data using a well-vetted methodology confirms the quality of the DESI spectra and the performance of the pipelines developed for the data reduction and analysis of DESI data.

astro-ph.SR↗

The Dark Energy Spectroscopic Instrument: One-dimensional power spectrum from first Lyman-$α$ forest samples with Fast Fourier Transform

We present the one-dimensional Lyman-$α$ forest power spectrum measurement using the first data provided by the Dark Energy Spectroscopic Instrument (DESI). The data sample comprises $26,330$ quasar spectra, at redshift $z > 2.1$, contained in the DESI Early Data Release and the first two months of the main survey. We employ a Fast Fourier Transform (FFT) estimator and compare the resulting power spectrum to an alternative likelihood-based method in a companion paper. We investigate methodological and instrumental contaminants associated to the new DESI instrument, applying techniques similar to previous Sloan Digital Sky Survey (SDSS) measurements. We use synthetic data based on log-normal approximation to validate and correct our measurement. We compare our resulting power spectrum with previous SDSS and high-resolution measurements. With relatively small number statistics, we successfully perform the FFT measurement, which is already competitive in terms of the scale range. At the end of the DESI survey, we expect a five times larger Lyman-$α$ forest sample than SDSS, providing an unprecedented precise one-dimensional power spectrum measurement.

astro-ph.CO↗

First Detection of the BAO Signal from Early DESI Data

We present the first detection of the baryon acoustic oscillations (BAO) signal obtained using unblinded data collected during the initial two months of operations of the Stage-IV ground-based Dark Energy Spectroscopic Instrument (DESI). From a selected sample of 261,291 Luminous Red Galaxies spanning the redshift interval 0.4 < z < 1.1 and covering 1651 square degrees with a 57.9% completeness level, we report a ~5 sigma level BAO detection and the measurement of the BAO location at a precision of 1.7%. Using a Bright Galaxy Sample of 109,523 galaxies in the redshift range 0.1 < z < 0.5, over 3677 square degrees with a 50.0% completeness, we also detect the BAO feature at ~3 sigma significance with a 2.6% precision. These first BAO measurements represent an important milestone, acting as a quality control on the optimal performance of the complex robotically-actuated, fiber-fed DESI spectrograph, as well as an early validation of the DESI spectroscopic pipeline and data management system. Based on these first promising results, we forecast that DESI is on target to achieve a high-significance BAO detection at sub-percent precision with the completed 5-year survey data, meeting the top-level science requirements on BAO measurements. This exquisite level of precision will set new standards in cosmology and confirm DESI as the most competitive BAO experiment for the remainder of this decade.

astro-ph.CO↗

The DESI One-Percent Survey: Evidence for Assembly Bias from Low-Redshift Counts-in-Cylinders Measurements

We explore the galaxy-halo connection information that is available in low-redshift samples from the early data release of the Dark Energy Spectroscopic Instrument (DESI). We model the halo occupation distribution (HOD) from z=0.1-0.3 using Survey Validation 3 (SV3; a.k.a., the One-Percent Survey) data of the DESI Bright Galaxy Survey (BGS). In addition to more commonly used metrics, we incorporate counts-in-cylinders (CiC) measurements, which drastically tighten HOD constraints. Our analysis is aided by the Python package, galtab, which enables the rapid, precise prediction of CiC for any HOD model available in halotools. This methodology allows our Markov chains to converge with much fewer trial points, and enables even more drastic speedups due to its GPU portability. Our HOD fits constrain characteristic halo masses tightly and provide statistical evidence for assembly bias, especially at lower luminosity thresholds: the HOD of central galaxies in $z\sim0.15$ samples with limiting absolute magnitude $M_r < -20.0$ and $M_r < -20.5$ samples is positively correlated with halo concentration with a significance of 99.9% and 99.5%, respectively. Our models also favor positive central assembly bias for the brighter $M_r < -21.0$ sample at $z\sim0.25$ (94.8% significance), but there is no significant evidence for assembly bias with the same luminosity threshold at $z\sim0.15$. We provide our constraints for each threshold sample's characteristic halo masses, assembly bias, and other HOD parameters. These constraints are expected to be significantly tightened with future DESI data, which will span an area 100 times larger than that of SV3.

astro-ph.CO↗

Uchuu-$ν^2$GC galaxies and AGN: Cosmic variance forecasts of high-redshift AGN for JWST, Euclid, and LSST

Measurements of the luminosity function of active galactic nuclei (AGN) at high redshift ($z\gtrsim 6$) are expected to suffer from field-to-field variance, including cosmic and Poisson variances. Future surveys, such as those from the Euclid telescope and James Webb Space Telescope (JWST), will also be affected by field variance. We use the Uchuu simulation, a state-of-the-art cosmological $N$-body simulation with 2.1 trillion particles in a volume of $25.7~\mathrm{Gpc}^3$, combined with a semi-analytic galaxy and AGN formation model, to generate the Uchuu-$ν^2$GC catalog, publicly available, that allows us to investigate the field-to-field variance of the luminosity function of AGN. With this Uchuu-$ν^2$GC model, we quantify the cosmic variance as a function of survey area, AGN luminosity, and redshift. In general, cosmic variance decreases with increasing survey area and decreasing redshift. We find that at $z\sim6-7$, the cosmic variance depends weakly on AGN luminosity. This is because the typical mass of dark matter haloes in which AGN reside does not significantly depend on luminosity. Due to the rarity of AGN, Poisson variance dominates the total field-to-field variance, especially for bright AGN. We also examine the effect of parameters related to galaxy formation physics on the field variance. We discuss uncertainties present in the estimation of the faint-end of the AGN luminosity function from recent observations, and extend this to make predictions for the expected number of AGN and their variance for upcoming observations with Euclid, JWST, and the Legacy Survey of Space and Time (LSST).

astro-ph.GA↗

Target Selection for the DESI Peculiar Velocity Survey

We describe the target selection and characteristics of the DESI Peculiar Velocity Survey, the largest survey of peculiar velocities (PVs) using both the fundamental plane (FP) and the Tully-Fisher (TF) relationship planned to date. We detail how we identify suitable early-type galaxies (ETGs) for the FP and suitable late-type galaxies (LTGs) for the TF relation using the photometric data provided by the DESI Legacy Imaging Survey DR9. Subsequently, we provide targets for 373 533 ETGs and 118 637 LTGs within the DESI 5-year footprint. We validate these photometric selections using existing morphological classifications. Furthermore, we demonstrate using survey validation data that DESI is able to measure the spectroscopic properties to sufficient precision to obtain PVs for our targets. Based on realistic DESI fiber assignment simulations and spectroscopic success rates, we predict the final DESI PV Survey will obtain $\sim$133 000 FP-based and $\sim$53 000 TF-based PV measurements over an area of 14 000 $\mathrm{deg^{2}}$. We forecast the ability of using these data to measure the clustering of galaxy positions and PVs from the combined DESI PV and Bright Galaxy Surveys (BGS), which allows for cancellation of cosmic variance at low redshifts. With these forecasts, we anticipate a $4\%$ statistical measurement on the growth rate of structure at $z<0.15$. This is over two times better than achievable with redshifts from the BGS alone. The combined DESI PV and BGS will enable the most precise tests to date of the time and scale dependence of large-scale structure growth at $z<0.15$.

astro-ph.CO↗

The Optical Corrector for the Dark Energy Spectroscopic Instrument

The Dark Energy Spectroscopic Instrument (DESI) is currently measuring the spectra of 40\,million galaxies and quasars, the largest such survey ever made to probe the nature of cosmological dark energy. The 4-meter Mayall telescope at Kitt Peak National Observatory has been adapted for DESI, including the construction of a 3.2-degree diameter prime focus corrector that focuses astronomical light onto a 0.8-meter diameter focal surface with excellent image quality over the DESI bandpass of 360-980nm. The wide-field corrector includes six lenses, as large as 1.1-meters in diameter and as heavy as 237\,kilograms, including two counter-rotating wedged lenses that correct for atmospheric dispersion over Zenith angles from 0 to 60 degrees. The lenses, cells, and barrel assembly all meet precise alignment tolerances on the order of tens of microns. The barrel alignment is maintained throughout a range of observing angles and temperature excursions in the Mayall dome by use of a hexapod, which is itself supported by a new cage, ring, and truss structure. In this paper we describe the design, fabrication, and performance of the new corrector and associated structure, focusing on how they meet DESI requirements. In particular we describe the prescription and specifications of the lenses, design choices and error budgeting of the barrel assembly, stray light mitigations, and integration and test at the Mayall telescope. We conclude with some validation highlights that demonstrate the successful corrector on-sky performance, and list some lessons learned during the multi-year fabrication phase.

astro-ph.IM↗

Confirmation of the standard cosmological model from red massive galaxies $\sim600$ Myr after the Big Bang

In their recent study, Labbé et al. used multi-band infrared images captured by the James Webb Space Telescope (JWST) to discover a population of red massive galaxies that formed approximately 600 million years after the Big Bang. The authors reported an extraordinarily large density of these galaxies, with stellar masses exceeding $10^{10}$ solar masses, which, if confirmed, challenges the standard cosmological model as suggested by recent studies. However, this conclusion is disputed. We contend that during the early epochs of the universe the stellar mass-to-light ratio could not have reached the values reported by Labbé et al. A model of galaxy formation based on standard cosmology provides support for this hypothesis, predicting the formation of massive galaxies with higher ultraviolet (UV) luminosity, which produce several hundred solar masses of stars per year and containing significant dust. These forecasts are consistent with the abundance of JWST/HST galaxies selected photometrically in the rest-frame UV wavelengths and with the properties of the recent spectroscopically-confirmed JWST/HST galaxies formed during that era. Discrepancies with Labbé et al. may arise from overestimation of the stellar masses, systematic uncertainties, absence of JWST/MIRI data, heavy dust extinction affecting UV luminosities, or misidentification of faint red AGN galaxies at closer redshifts. The current JWST/HST results, combined with a realistic galaxy formation model, provide strong confirmation of the standard cosmology.

astro-ph.GA↗

DESI Survey Validation Spectra Reveal an Increasing Fraction of Recently Quenched Galaxies at $z\sim1$

We utilize $\sim17000$ bright Luminous Red Galaxies (LRGs) from the novel Dark Energy Spectroscopic Instrument Survey Validation spectroscopic sample, leveraging its deep ($\sim2.5$ hour/galaxy exposure time) spectra to characterize the contribution of recently quenched galaxies to the massive galaxy population at $0.4 1$) of our sample of recently quenched galaxies represents the largest spectroscopic sample of post-starburst galaxies at that epoch. At $0.4 11.2$) LRGs by measuring the fraction of stellar mass each galaxy formed in the Gyr before observation, $f_\mathrm{1 Gyr}$. Although galaxies with $f_\mathrm{1 Gyr}>0.1$ are rare at $z\sim0.4$ ($\lesssim 0.5\%$ of the population), by $z\sim0.8$ they constitute $\sim3\%$ of massive galaxies. Relaxing this threshold, we find that galaxies with $f_\mathrm{1 Gyr}>5\%$ constitute $\sim10\%$ of the massive galaxy population at $z\sim0.8$. We also identify a small but significant sample of galaxies at $z=1.1-1.3$ that formed with $f_\mathrm{1 Gyr}>50\%$, implying that they may be analogues to high-redshift quiescent galaxies that formed on similar timescales. Future analysis of this unprecedented sample promises to illuminate the physical mechanisms that drive the quenching of massive galaxies after cosmic noon.

astro-ph.GA↗

Overview of the DESI Milky Way Survey

We describe the Milky Way Survey (MWS) that will be undertaken with the Dark Energy Spectroscopic Instrument (DESI) on the Mayall 4m telescope at the Kitt Peak National Observatory. Over the next 5 yr DESI MWS will observe approximately seven million stars at Galactic latitudes |b|>20 degrees, with an inclusive target selection scheme focused on the thick disk and stellar halo. MWS will also include several high-completeness samples of rare stellar types, including white dwarfs, low-mass stars within 100pc of the Sun, and horizontal branch stars. We summarize the potential of DESI to advance understanding of Galactic structure and stellar evolution. We introduce the final definitions of the main MWS target classes and estimate the number of stars in each class that will be observed. We describe our pipelines for deriving radial velocities, atmospheric parameters, and chemical abundances. We use ~500,000 spectra of unique stellar targets from the DESI Survey Validation program (SV) to demonstrate that our pipelines can measure radial velocities to ~1 km/s and [Fe/H] accurate to ~0.2 dex for typical stars in our main sample. We find the stellar parameter distributions from ~100 sq. deg of SV observations with >90% completeness on our main sample are in good agreement with expectations from mock catalogs and previous surveys.

astro-ph.GA↗

LCDM halo substructure properties revealed with high resolution and large volume cosmological simulations

We investigate the structural properties, distribution and abundance of LCDM dark matter subhaloes using the Phi-4096 and Uchuu suite of N-body cosmological simulations. Thanks to the combination of their large volume, high mass resolution and superb statistics, we are able to quantify -- for the first time consistently over more than seven decades in ratio of subhalo-to-host-halo mass -- dependencies of subhalo properties with mass, maximum circular velocity, Vmax, host halo mass and distance to host halo centre. We also dissect the evolution of these dependencies over cosmic time. We provide accurate fits for the subhalo mass and velocity functions, both exhibiting decreasing power-law slopes in the expected range of values and with no significant dependence on redshift. We also find subhalo abundance to depend weakly on host halo mass. We explore the distribution of subhaloes within their hosts and its evolution over cosmic time for subhaloes located as deep as ~0.1 per cent of the host virial radius. Subhalo structural properties are codified via a concentration parameter, cV, that does not depend on any specific, pre-defined density profile and relies only on Vmax. We derive the cV-Vmax relation in the range 7-1500 km/s and find an important dependence on distance of the subhalo to the host halo centre, as already described in Moliné et al. (2017). Interestingly, we also find subhaloes of the same mass to be significantly more concentrated into more massive hosts. Finally, we investigate the redshift evolution of cV, and provide accurate fits that take into account all mentioned dependencies. Our results offer an unprecedented detailed characterization of the subhalo population, consistent over a wide range of subhalo and host halo masses, as well as cosmic times. Our work enables precision work in any future research involving dark matter halo substructure.

astro-ph.CO↗

DESI and DECaLS (D&D): galaxy-galaxy lensing measurements with 1% survey and its forecast

The shear measurement from DECaLS (Dark Energy Camera Legacy Survey) provides an excellent opportunity for galaxy-galaxy lensing study with DESI (Dark Energy Spectroscopic Instrument) galaxies, given the large ($\sim 9000$ deg$^2$) sky overlap. We explore this potential by combining the DESI 1\% survey and DECaLS DR8. With $\sim 106$ deg$^2$ sky overlap, we achieve significant detection of galaxy-galaxy lensing for BGS and LRG as lenses. Scaled to the full BGS sample, we expect the statistical errors to improve from $18(12)\%$ to a promising level of $2(1.3)\%$ at $θ>8^{'}(<8^{'})$. This brings stronger requirements for future systematics control. To fully realize such potential, we need to control the residual multiplicative shear bias $|m|<0.01$ and the bias in the mean redshift $|Δz|<0.015$. We also expect significant detection of galaxy-galaxy lensing with DESI LRG/ELG full samples as lenses, and cosmic magnification of ELG through cross-correlation with low-redshift DECaLS shear. {If such systematical error control can be achieved,} we find the advantages of DECaLS, comparing with KiDS (Kilo Degree Survey) and HSC (Hyper-Suprime Cam), are at low redshift, large-scale, and in measuring the shear-ratio (to $σ_R\sim 0.04$) and cosmic magnification.

astro-ph.CO↗

The Target-selection Pipeline for the Dark Energy Spectroscopic Instrument

In 2021 May, the Dark Energy Spectroscopic Instrument (DESI) began a 5 yr survey of approximately 50 million total extragalactic and Galactic targets. The primary DESI dark-time targets are emission line galaxies (ELGs), luminous red galaxies (LRGs) and quasars (QSOs). In bright time, DESI will focus on two surveys known as the Bright Galaxy Survey (BGS) and the Milky Way Survey (MWS). DESI also observes a selection of "secondary" targets for bespoke science goals. This paper gives an overview of the publicly available pipeline (desitarget) used to process targets for DESI observations. Highlights include details of the different DESI survey targeting phases, the targeting ID (TARGETID) used to define unique targets, the bitmasks used to indicate a particular type of target, the data model and structure of DESI targeting files, and examples of how to access and use the desitarget code base. This paper will also describe "supporting" DESI target classes, such as standard stars, sky locations, and random catalogs that mimic the angular selection function of DESI targets. The DESI target selection pipeline is complex and sizable; this paper attempts to summarize the most salient information required to understand and work with DESI targeting data.

astro-ph.IM↗

The Uchuu-UniverseMachine dataset: Galaxies in and around Clusters

We present the public data release of the Uchuu-UM galaxy catalogues by applying the UniverseMachine algorithm to assign galaxies to the dark matter halos in the Uchuu $N$-body cosmological simulation. It includes a variety of baryonic properties for all galaxies down to $\sim 5\times10^8 M_{\odot}$ with halos in a mass range of $10^{10}<M_{\rm halo}/M_{\odot}<5\times10^{15}$ up to redshift $z=10$. Uchuu-UM includes more than $10^{4}$ cluster-size halos in a volume of $ 8(h^{-1} {\rm Gpc})^3$, reproducing observed stellar mass functions across the redshift range of $z=0-7$, galaxy quenched fractions, and clustering statistics at low redshifts. Compared to the previous largest UM catalogue, the Uchuu-UM catalogue includes significantly more massive galaxies hosted by large-mass dark matter halos. Overall, the number density profile of galaxies in dark matter halos follows the dark matter profile, with the profile becoming steeper around the splashback radius and flattening at larger radii. The number density profile of galaxies tends to be steeper for larger stellar masses and depends on the color of galaxies, with red galaxies having steeper slopes at all radii than blue galaxies. The quenched fraction exhibits a strong dependence on the stellar mass and increases toward the inner regions of clusters. The publicly available Uchuu-UM galaxy catalogue presented here can serve to model ongoing and upcoming large galaxy surveys.

astro-ph.GA↗

The Hubble constant from two sibling Type Ia supernovae in the nearby galaxy NGC 4414: SN 1974G and SN 2021J

Having two "sibling" Type Ia supernovae (SNe Ia) in the same galaxy offers additional advantages in reducing a variety of systematic errors involved in estimating the Hubble constant, $H_{0}$. NGC 4414 is a nearby galaxy included in the Hubble Space Telescope Key Project to measure its distance using Cepheid variables. It hosts two sibling SNe Ia: SN 2021J and SN 1974G. This provides the opportunity to improve the precision of the previous estimate of $H_{0}$, which was based solely on SN 1974G. Here we present new optical $BVRI$ photometry obtained at the Observatorio de Sierra Nevada and complement it with Swift UVOT $UBV$ data, which cover the first 70 days of emission of SN 2021J. A first look at SN 2021J optical spectra obtained with the Gran Telescopio Canarias (GTC) reveals typical SN type Ia features. The main SN luminosity parameters for the two sibling SNe are obtained by using SNooPy, a light curve fitting code based on templates. Using a hierarchical bayesian approach, we build the Hubble diagram with a sample of 96 SNe Ia obtained from the Combined Pantheon Sample in the redshift range $z = 0.02-0.075$, and calibrate the zero point with the two sibling type-Ia SNe in NGC 4414. We report a value of the Hubble constant $H_{0}$ $= 72.19 \pm 2.32$ (stat.) $\pm 3.42$ (syst.) km s$^{-1}$Mpc$^{-1}$. We expect a reduction of the systematic error after a new analysis of the Cepheids period-luminosity relation using the upcoming Gaia DR4 and additional Cepheids from the HST and JWST.

astro-ph.CO↗

Target Selection and Validation of DESI Quasars

The Dark Energy Spectroscopic Instrument (DESI) survey will measure large-scale structures using quasars as direct tracers of dark matter in the redshift range 0.9 2.1. We present several methods to select candidate quasars for DESI, using input photometric imaging in three optical bands (g, r, z) from the DESI Legacy Imaging Surveys and two infrared bands (W1, W2) from the Wide-field Infrared Explorer (WISE). These methods were extensively tested during the Survey Validation of DESI. In this paper, we report on the results obtained with the different methods and present the selection we optimized for the DESI main survey. The final quasar target selection is based on a Random Forest algorithm and selects quasars in the magnitude range 16.5 99% purity for a nominal effective exposure time of ~1000s. With a 310 per sq. deg. target density, the main selection allows DESI to select more than 200 QSOs per sq. deg. (including 60 quasars with z>2.1), exceeding the project requirements by 20%. The redshift distribution of the selected quasars is in excellent agreement with quasar luminosity function predictions.

astro-ph.CO↗

DESI Bright Galaxy Survey: Final Target Selection, Design, and Validation

Over the next five years, the Dark Energy Spectroscopic Instrument (DESI) will use 10 spectrographs with 5000 fibers on the 4m Mayall Telescope at Kitt Peak National Observatory to conduct the first Stage-IV dark energy galaxy survey. At $z < 0.6$, the DESI Bright Galaxy Survey (BGS) will produce the most detailed map of the Universe during the dark energy dominated epoch with redshifts of >10 million galaxies over 14,000 deg$^2$. In this work, we present and validate the final BGS target selection and survey design. From the Legacy Surveys, BGS will target a $r < 19.5$ magnitude-limited sample (BGS Bright); a fainter $19.5 < r < 20.175$ sample, color-selected to have high redshift efficiency (BGS Faint); and a smaller low-z quasar sample. BGS will observe these targets using exposure times, scaled to achieve uniform completeness, and visit each point on the footprint three times. We use observations from the Survey Validation programs conducted prior to the main survey along with realistic simulations to show that BGS can complete its strategy and make optimal use of `bright' time. We demonstrate that BGS targets have stellar contamination <1% and that their densities do not depend strongly on imaging properties. We also confirm that BGS Bright will achieve >80% fiber assignment efficiency. Finally, we show that BGS Bright and Faint will achieve >95% redshift success rates with no significant dependence on observing conditions. BGS meets the requirements for an extensive range of scientific applications. BGS will yield the most precise Baryon Acoustic Oscillations and Redshift-Space Distortions measurements at $z < 0.4$. It also presents opportunities to exploit new methods that require highly complete and dense galaxy samples (e.g. N-point statistics, multi-tracers). BGS further provides a powerful tool to study galaxy populations and the relations between galaxies and dark matter.

astro-ph.CO↗

The Robotic Multi-Object Focal Plane System of the Dark Energy Spectroscopic Instrument (DESI)

A system of 5,020 robotic fiber positioners was installed in 2019 on the Mayall Telescope, at Kitt Peak National Observatory. The robots automatically re-target their optical fibers every 10 - 20 minutes, each to a precision of several microns, with a reconfiguration time less than 2 minutes. Over the next five years, they will enable the newly-constructed Dark Energy Spectroscopic Instrument (DESI) to measure the spectra of 35 million galaxies and quasars. DESI will produce the largest 3D map of the universe to date and measure the expansion history of the cosmos. In addition to the 5,020 robotic positioners and optical fibers, DESI's Focal Plane System includes 6 guide cameras, 4 wavefront cameras, 123 fiducial point sources, and a metrology camera mounted at the primary mirror. The system also includes associated structural, thermal, and electrical systems. In all, it contains over 675,000 individual parts. We discuss the design, construction, quality control, and integration of all these components. We include a summary of the key requirements, the review and acceptance process, on-sky validations of requirements, and lessons learned for future multi-object, fiber-fed spectrographs.

astro-ph.IM↗