arXiv subjects

Francois Courvoisier

Publications and source records attributed to Francois Courvoisier.

14 recordsLinked to original sources

arXiv2023

3D structured Bessel beam polarization and its application to imprint chiral optical properties in silica

Polarization plays crucial role in light-matter interactions; hence its overall manipulation is an essential key to unlock the versatility of light manufacturing, especially in femtosecond laser direct writing. Existing polarization-shaping techniques, however, only focus on the manipulation in transverse plane of a light beam, namely a two-dimensional control. In this paper, we propose a novel passive strategy that exploits a class of femtosecond laser written space varying birefringent elements, to shape the polarization state along the optical path. As a demonstration, we generate a three-dimensional structured Bessel beam whose linear polarization state is slowly evolving along the focus (typ. 90 degrees within 60 lightwave periods). Such a "helical polarized" Bessel beam allows imprinting "twisted nanogratings" in SiO2 resulting in an extrinsic optical chirality at a micrometric scale, which owns a high optical rotation. Our work brings new perspectives for three-dimensional polarization manipulations and would find applications in structured light, light-matter interaction and chiral device fabrication.

physics.optics↗

arXiv2023

Femtosecond laser-induced sub-wavelength plasma inside dielectrics: III. Terahertz radiation emission

Electromagnetic radiation within the terahertz (THz) frequency range is of great interest for applications in remote sensing and time-domain spectroscopy. The laser-induced plasmas are promising mediums for generating THz radiation. It has been recently reported that focusing femtosecond Bessel pulses inside dielectrics induces a high aspect ratio over-critical plasmas. Here we show that the intense resonantly driven electrostatic fields at the so-called critical surface lead to THz radiation emission. Through three-dimensional particle-in-cell simulation and analytical derivation, we have investigated the emission of THz radiation. We show that the THz radiation is associated with a hot population of electrons trapped in ambipolar electric fields of the double layers.

physics.plasm-ph↗

arXiv2023

Electron heating and radiation in high aspect ratio sub-micron plasma generated by an ultrafast Bessel pulse within a solid dielectric

When propagating inside dielectrics, an ultrafast Bessel beam creates a high aspect-ratio cylinder of plasma with nanometric diameter that extends over several tens of micrometers to centimeters. We analyze the interaction between the intense ultrafast laser pulse and the plasma rod using particle-in-cell simulations. We show that electrons are heated and accelerated up to keV energies via transit acceleration inside the resonance lobes in the vicinity of the critical surface and compute their radiation pattern.

physics.plasm-ph↗

arXiv2022

Femtosecond laser-induced sub-wavelength plasma inside dielectrics: I. Field enhancement

The creation of high energy density ($\gtrsim10^6$ joules per cm$^3$) over-critical plasmas in a large volume has essential applications in the study of warm dense matter, being present in the hot cores of stars and planets. It was recently shown that femtosecond Bessel beams enable creating over-critical plasmas inside sapphire with sub-wavelength radius and several tens of micrometers in length. Here, the dependence of field structure and absorption mechanism on the plasma density transverse profile are investigated by performing self-consistent Particle-In-Cell (PIC) simulations. Two { limiting} cases are considered: one is a homogeneous step-like profile, that can sustain plasmon formation, the second is an inhomogeneous Gaussian profile, where resonance absorption occurs. Comparing experimental absorption measures to analytical predictions allows determining the plasma parameters used in PIC simulations. The PIC simulation results are in good agreement with experimental diagnostics of total absorption, near-field fluence distribution, and far-field radiation pattern. We show that in each case an ambipolar field forms at the plasma surface due to the expansion of the hot electrons and that electron sound waves propagate into the over-critical region.

physics.plasm-ph↗

arXiv2022

Femtosecond laser-induced sub-wavelength plasma inside dielectrics: II. Second-harmonic generation

Second-harmonic emission at a frequency that is twice the laser frequency is an important diagnostic for nonlinear laser-plasma interaction. It is forbidden for centrosymmetric materials such as the bulk of sapphire. The symmetry, however, can be broken by dielectric discontinuities as a result of plasma generation inside a solid dielectric. In the present work, we explore the basic characteristics of experimentally observed second-harmonic emission during focusing a femtosecond Bessel beam inside sapphire. We employ three-dimensional particle-in-cell simulations and the Helmholtz wave equation for theoretical investigations. We analyze how the efficiency of second-harmonic generation and its polarization depend on the plasma parameters. We find that the second-harmonic is generated either due to the coalescence of two surface electromagnetic waves or nonlinear interaction between the transverse electromagnetic wave and the longitudinal electron plasma wave driven by linear mode conversion. Experimental results agree with the theoretical predictions and confirm the existence of over-critical plasma inside the sapphire that is essential for the resonance of plasma waves or excitation of surface plasmons.

physics.plasm-ph↗

arXiv2022

High energy density plasma mediated by collisionless resonance absorption inside dielectrics

We demonstrate for the first time to our knowledge the generation of overcritical plasma densities inside transparent solids over long distances using femtosecond laser pulses. This opens new avenues for high energy density physics in confined geometry such as warm dense matter study or the synthesis of new material phases. We show both with experiments and first-principles simulations, that femtosecond conical interference via a Bessel beam creates a dense plasma rod with typically 100 nm diameter in sapphire. The interaction is in ideal conditions to trigger collisionless resonance absorption. This mechanism plays a primary role in the energy deposition process, yielding a plasma with an energy density on the order of MJ/cm3 and a length that can reach several cm using only tabletop femtosecond lasers.

physics.plasm-ph↗

arXiv2021

Ultrafast laser micro-nano structuring of transparent materials with high aspect ratio

Ultrafast lasers are ideal tools to process transparent materials because they spatially confine the deposition of laser energy within the material's bulk via nonlinear photoionization processes. Nonlinear propagation and filamentation were initially regarded as deleterious effects. But in the last decade, they turned out to be benefits to control energy deposition over long distances. These effects create very high aspect ratio structures which have found a number of important applications, particularly for glass separation with non-ablative techniques. This chapter reviews the developments of in-volume ultrafast laser processing of transparent materials. We discuss the basic physics of the processes, characterization means, filamentation of Gaussian and Bessel beams and provide an overview of present applications.

physics.optics↗

arXiv2021

Generation of a Bessel beam in FDTD using a cylindrical antenna

Bessel beams are becoming a very useful tool in many areas of optics and photonics, because of the invariance of their intensity profile over an extended propagation range. Finite-Difference-Time-Domain (FDTD) approach is widely used for the modeling of the beam interaction with nanostructures. However, the generation of the Bessel beam in this approach is a computationally challenging problem. In this work, we report an approach for the generation of the infinite Bessel beams in three-dimensional FDTD. It is based on the injection of the Bessel solutions of Maxwell's equations from a cylindrical hollow annulus. This configuration is compatible with Particle In Cell simulations of laser plasma interactions. This configuration allows using a smaller computation box and is therefore computationally more efficient than the creation of a Bessel-Gauss beam from a wall and models more precisely the analytical infinite Bessel beam. Zeroth and higher-order Bessel beams with different cone angles are successfully produced. We investigate the effects of the injector parameters on the error with respect to the analytical solution. In all cases, the relative deviation is in the range of 0.01-7.0 percent.

physics.optics↗

arXiv2021

Nanoscale confinement of energy deposition in glass by double ultrafast Bessel pulses

Ultrafast laser pulses spatially shaped as Bessel beams in dielectrics create high aspect ratio plasma channels whose relaxation can lead to the formation of nanochannels. We report a strong enhancement of the nanochannel drilling efficiency with illumination by double pulses separated by a delay between 10 to 500 ps. This enables the formation of nanochannels with diameters down to 100 nm. Experimental absorption measurements demonstrate that the increase of drilling efficiency is due to an increase of the confinement of the energy deposition. Nanochannel formation corresponds to a drastic change in absorption of the second pulse demonstrating the occurrence of a phase change produced by the first pulse. This creates a highly absorbing long-living state. Our measurements show that it is compatible with the semi-metallization of warm dense glass which takes place within a timescale of <10 ps after the first laser pulse illumination.

physics.optics↗

arXiv2021

In-situ diagnostic of femtosecond probes for high resolution ultrafast imaging

Ultrafast imaging is essential in physics and chemistry to investigate the femtosecond dynamics of nonuniform samples or of phenomena with strong spatial variations. It relies on observing the phenomena induced by an ultrashort laser pump pulse using an ultrashort probe pulse at a later time. Recent years have seen the emergence of very successful ultrafast imaging techniques of single non-reproducible events with extremely high frame rate, based on wavelength or spatial frequency encoding. However, further progress in ultrafast imaging towards high spatial resolution is hampered by the lack of characterization of weak probe beams. Because of the difference in group velocities between pump and probe in the bulk of the material, the determination of the absolute pump-probe delay depends on the sample position. In addition, pulse-front tilt is a widespread issue, unacceptable for ultrafast imaging, but which is conventionally very difficult to evaluate for the low-intensity probe pulses. Here we show that a pump-induced micro-grating generated from the electronic Kerr effect provides a detailed in-situ characterization of a weak probe pulse. It allows solving the two issues. Our approach is valid whatever the transparent medium, whatever the probe pulse polarization and wavelength. Because it is nondestructive and fast to implement, this in-situ probe diagnostic can be repeated to calibrate experimental conditions, particularly in the case where complex wavelength, spatial frequency or polarization encoding is used. We anticipate that this technique will enable previously inaccessible spatiotemporal imaging in all fields of ultrafast science and high field physics at the micro- and nanoscale.

physics.optics↗

arXiv2019

Advancing Fourier: space-time concepts in ultrafast optics, imaging and photonic neural networks

The concepts of Fourier optics were established in France in the 1940s by Pierre-Michel Duffieux, and laid the foundations of an extensive series of activities in the French research community that have touched on nearly every aspect of contemporary optics and photonics. In this paper, we review a selection of results where applications of the Fourier transform and transfer functions in optics have been applied to yield significant advances in unexpected areas of optics, including the spatial shaping of complex laser beams in amplitude and in phase, real-time ultrafast measurements, novel ghost imaging techniques, and the development of parallel processing methodologies for photonic artificial intelligence.

physics.optics↗

arXiv2019

Control of spatial four wave mixing efficiency in Bessel beams using longitudinal intensity shaping

Diffraction-free Bessel beams have attracted major interest because of their stability even in regimes of nonlinear propagation and filamentation. However, Kerr nonlinear couplings are known to induce significant longitudinal intensity modulation, detrimental to the generation of uniform plasma or for applications in the processing of transparent materials. These nonlinear instabilities arise from the generation of new spatio-spectral components through an initial stage of continuous spectral broadening followed by four wave mixing. In this paper, we investigate analytically and numerically these processes and show that nonlinear instabilities can be controlled through shaping the spatial spectral phase of the input beam. This opens new routes for suppressing the nonlinear growth of new frequencies and controlling ultrashort pulse propagation in dielectrics.

physics.optics↗

arXiv2018

Ultrafast Bessel beams; advanced tools for laser materials processing

Ultrafast Bessel beams demonstrate a significant capacity of structuring transparent materials with high degree of accuracy and exceptional aspect ratio. The ability to localize energy on the nanometer scale (bypassing the 100 nm milestone) makes them ideal tools for advanced laser nanoscale processing on surfaces and in the bulk. This allows to generate and combine micron and nano-sized features into hybrid structures that show novel functionalities. Their high aspect ratio and the accurate location can equally drive an efficient material modification and processing strategy on large dimensions. We review here the main concepts of generating and using Bessel non-diffractive beams and their remarkable features, discuss general characteristics of their interaction with matter in ablation and material modification regimes, and advocate their use for obtaining hybrid micro and nanoscale structures in two and three dimensions performing complex functions. High throughput applications are indicated. The example list ranges from surface nanostructuring and laser cutting to ultrafast laser welding and the fabrication of three dimensional photonic systems embedded in the volume.

physics.app-ph↗

arXiv2017

Interaction of the ultra-short Bessel beam with transparent dielectrics: Evidence of high-energy concentration and multi-TPa pressure

It has been proven that the intense tightly focused Gauss beam (GB) generates pressures in excess of a few TPa creating the novel super-dense phases of Aluminium and silicon [1-5]. Recently it was demonstrated that the Bessel beam (BB) focused inside sapphire produced the cylindrical void being two orders of magnitude larger than that generated by the GB [6-8]. Analysis of the experimental data presented below allows making the remarkable conclusions based solely on the void size measurements without any ad hoc assumptions about the interaction process. First, the void size is direct evidence of strong (>40%) absorption of the pulse energy. Second, it is a direct experimental evidence of the high-energy concentration in the central spike of the focus. The unique features of the intense Bessel beam interaction then allow understanding the experimental observation. This interaction generates early in the pulse time the spatial distribution of excited permittivity changing from positive to negative values. Then the light interacts with zero-real-permittivity surface, separating plasma and dielectric areas, which leads to high energy concentration near the axis of cylindrical focus up to several MJ/cm3 (pressure range of 4-8 TPa). The effect depends on the angle between the permittivity gradient and the field polarisation. High pressure generates intense cylindrical shock/ rarefaction waves, which led to formation of void and compressed shell. We demonstrate that the Bessel beam proves to be an effective tool for producing extreme pressure/temperature conditions on the laboratory tabletop. It appears that adjusting polarisation and permittivity gradient might be a novel way for increasing the maximum pressure. This tool allows for search of novel high-pressure material phases, for the 3D laser machining and for creating Warm Dense Matter as those in star cores.

physics.optics↗