arXiv subjects

Frank Abild-Pedersen

Publications and source records attributed to Frank Abild-Pedersen.

8 recordsLinked to original sources

arXiv2026

In situ Gas-Cell Electron Microscopy Reveals Pressure-Selected Restructuring Pathways in AuRu Ammonia Catalysts

Bimetallic catalysts provide new routes toward sustainable ammonia synthesis, but the nanoscale structural dynamics under reaction-relevant conditions remain poorly understood. Here, we combine in situ gas-cell and multimodal electron microscopy to determine how temperature, gas pressure, and chemistry select among distinct restructuring pathways in AuRu nanocrystal catalysts. Initially, the AuRu nanocrystals form polycrystalline face-centered cubic (FCC) alloys with Au/Ru intermixing. Elevated temperature ($\geq 350~^\circ$C) induces intraparticle phase segregation into distinct Au-rich (FCC) and Ru-rich hexagonal close-packed (HCP) domains that exhibit localized plasmonic modes. Atmospheric-pressure 3:1 H$_2$:N$_2$ gas unlocks a distinct restructuring regime absent at lower pressures, characterized by pronounced faceting and nanovoid formation. Systematic gas variation identifies hydrogen as the dominant driver. Density functional theory-trained machine-learning interatomic potentials and grand-canonical Monte Carlo simulations reveal that H-Ru interactions enhance the Au/Ru diffusivity mismatch, promoting vacancy accumulation and nanovoid formation. Together, these results show that, rather than simply accelerating the thermally driven phase segregation observed at lower pressures, atmospheric-pressure H$_2$:N$_2$ gas redirects restructuring toward faceting and nanovoid formation through a gas-mediated Kirkendall-type mechanism.

cond-mat.mtrl-sci↗

arXiv2025

Single-Ion Sensing in Liquid Using Fluorescent h-BN Point Defects

Understanding the chemical state of individual ions in solutions is crucial for advancing knowledge of complex systems. However, sensing systems at the single-ion level in liquid environments remains a significant challenge. A strategy is introduced that leverages the optical emission properties of point defects in hexagonal boron nitride (h-BN) as single ion sensors. The interaction of optically active h-BN defects with ions in solution leads to distinct spectral shifts, enabling precise visualization and analyzing of individual ions. Using Li+ ions in organic electrolytes as a model, spectral shifts exceeding 10 nm were observed upon ion addition. Application of an external electric field further enhanced these shifts to over 40 nm, enabling real-time monitoring of electrical field induced local perturbations of Li+ ions. Through this approach, individual point defects were shown to spectroscopically distinguish ions of varying charges (e.g., Na+, Mg2+, and Al3+) based on their local electrical field, each producing a distinct spectral shift. This platform allows direct sensing of ions and their chemical states in liquid environments, providing insights into subtle interfacial changes at the single-ion level, with measurable spectral shifts detectable at millisecond temporal resolution and at concentrations down to 10 micromolar range. This capability presents potential applications in various fields involving ions in liquids that include battery technology and environmental science.

cond-mat.mes-hall↗

arXiv2025

A Coordination-Based Model for the Prediction of Surface Energies and the Shape of Metal Particles

Surface energies of metal-based systems are important for determining the Wulff-constructed shapes of metal nanoparticles and understanding the stability. We have developed a coordination number-based model to predict the total energy of metal-based systems across a wide range of configurations. Our model has been tested against Density Functional Theory (DFT) calculations for late transition metals. This method enables on-the-fly surface energy predictions and allows for the Wulff construction of metal particles for a random number of elemental atoms and without the need for DFT calculations. By making a division between atoms in the different layers of the model system we can considerably improve the accuracy of the model, suggesting a dissimilarity between the electronic structure due to an alternating compression and expansion of atomic layers in the near-surface region. We find that our model accurately and effectively provides valuable insights into the distribution and stability of nanoparticle surfaces.

cond-mat.mtrl-sci↗

arXiv2022

X-ray Free Electron Laser Studies of Electron and Phonon Dynamics of Graphene Adsorbed on Copper

We report optical pumping and X-ray absorption spectroscopy experiments at the PAL free electron laser that directly probe the electron dynamics of a graphene monolayer adsorbed on copper in the femtosecond regime. By analyzing the results with ab-initio theory we infer that the excitation of graphene is dominated by indirect excitation from hot electron-hole pairs created in the copper by the optical laser pulse. However, once the excitation is created in graphene, its decay follows a similar path as in many previous studies of graphene adsorbed on semiconductors, i e. rapid excitation of SCOPS (Strongly Coupled Optical Phonons) and eventual thermalization. It is likely that the lifetime of the hot electron-hole pairs in copper governs the lifetime of the electronic excitation of the graphene.

cond-mat.mes-hall↗

arXiv2022

Atom-Specific Probing of Electron Dynamics in an Atomic Adsorbate by Time-Resolved X-ray Spectroscopy

The electronic excitation occurring on adsorbates at ultrafast time scales from optical lasers that initiate surface chemical reactions is still an open question. Here, we report the ultrafast temporal evolution of X-ray absorption spectroscopy (XAS) and X-ray emission spectroscopy (XES) of a simple well known adsorbate prototype system, namely carbon (C) atoms adsorbed on a nickel (Ni(100)) surface, following intense laser optical pumping at 400 nm. We observe ultrafast (~100 fs) changes in both XAS and XES showing clear signatures of the formation of a hot electron-hole pair distribution on the adsorbate. This is followed by slower changes on a few ps time scale, shown to be consistent with thermalization of the complete C/Ni system. Density functional theory spectrum simulations support this interpretation.

physics.chem-ph↗

arXiv2021

Ultrafast adsorbate excitation probed with sub-ps resolution XAS

We use a pump-probe scheme to measure the time evolution of the C K-edge X-ray absorption spectrum (XAS) from CO/Ru(0001) after excitation by an ultrashort high-intensity optical laser pulse. Due to the short duration of the X-ray probe pulse and precise control of the pulse delay, the excitation-induced dynamics during the first ps after the pump can be resolved with unprecedented time resolution. By comparing with theoretical (DFT) spectrum calculations we find high excitation of the internal stretch and frustrated rotation modes occurring within 200 fs of laser excitation, as well as thermalization of the system in the ps regime. The ~100 fs initial excitation of these CO vibrational modes is not readily rationalized by traditional theories of nonadiabatic coupling of adsorbates to metal surfaces, e. g. electronic frictions based on first order electron-phonon coupling or transient population of adsorbate resonances. We suggest that coupling of the adsorbate to non-thermalized electron-hole pairs is responsible for the ultrafast initial excitation of the modes.

physics.chem-ph↗

arXiv2020

Artificial intelligence real-time prediction and physical interpretation of atomic binding energies in nano-scale metal clusters

Single atomic sites often determine the functionality and performance of materials, such as catalysts, semi-conductors or enzymes. Computing and understanding the properties of such sites is therefore a crucial component of the rational materials design process. Because of complex electronic effects at the atomic level, atomic site properties are conventionally derived from computationally expensive first-principle calculations, as this level of theory is required to achieve relevant accuracy. In this study, we present a widely applicable machine learning (ML) approach to compute atomic site properties with high accuracy in real time. The approach works well for complex non-crystalline atomic structures and therefore opens up the possibility for high-throughput screenings of nano-materials, amorphous systems and materials interfaces. Our approach includes a robust featurization scheme to transform atomic structures into features which can be used by common machine learning models. Performing a genetic algorithm (GA) based feature selection, we show how to establish an intuitive physical interpretation of the structure-property relations implied by the ML models. With this approach, we compute atomic site stabilities of metal nanoparticles ranging from 3-55 atoms with mean absolute errors in the range of 0.11-0.14 eV in real time. We also establish the chemical identity of the site as most important factor in determining atomic site stabilities, followed by structural features like bond distances and angles. Both, the featurization and GA feature selection functionality are published in open-source python modules. With this method, we enable the efficient rational design of highly specialized real-world nano-catalysts through data-driven materials screening.

physics.chem-ph↗

arXiv2014

Insights into carbon nanotube nucleation: Cap formation governed by catalyst interfacial step flow

In order to accommodate an increasing demand for carbon nanotubes (CNTs) with desirable characteristics one has to understand the origin of helicity of their structures. Here, through in situ microscopy we demonstrate that the nucleation of a carbon nanotube is initiated by the formation of the carbon cap. Nucleation begins with the formation of a graphene embryo that is bound between opposite step-edges on the nickel catalyst surface. The embryo grows larger as the step-edges migrate along the surface, leading to the formation of a curved carbon cap when the steps flow across the edges of adjacent facets. Further motion of the steps away from the catalyst tip with attached rims of the carbon cap generates the wall of the nanotube. Density Functional Theory calculations bring further insight into the process, showing that step flow occurs by surface self diffusion of the nickel atoms via a step-edge attachment-detachment mechanism. Since the fact that cap forms first in the sequence of stages involved in nanotube growth, we suggest that it originates the helicity of the nanotube. Therefore, the angular distribution of catalyst facets could be exploited as a new parameter for controlling the curvature of the cap and, presumably, the helicity of the nanotube.

cond-mat.mtrl-sci↗