arXiv subjects

Frank Diermeyer

Publications and source records attributed to Frank Diermeyer.

30 records · Page 2Linked to original sources

arXiv2023

Dynamic Collaborative Path Planning for Remote Assistance of Highly-Automated Vehicles

Given its increasing popularity in recent years, teleoperation technology is now recognized as a robust fallback solution for Automated Driving (AD). Remote Assistance (RA) represents an event-driven class of teleoperation with a distinct division of tasks between the Autonomous Vehicle (AV) and the remote human operator. This paper presents a novel approach for RA of AVs in urban environments. The concept draws inspiration from the potential synergy between highly-automated systems and human operators to collaboratively solve complex driving situations. Utilizing a hybrid algorithm that makes use of the Operational Design Domain (ODD) modification idea, it considers actions that go beyond the nominal operational space. Combined with the advanced cognitive reasoning of the human remote operator, the concept offers features that hold the potential to significantly improve both RA and AD user experiences.

cs.RO↗

arXiv2022

Driverless road-marking Machines: Ma(r)king the Way towards the Future of Mobility

Driverless road maintenance could potentially be highly beneficial to all its stakeholders, with the key goals being increased safety for all road participants, more efficient traffic management, and reduced road maintenance costs such that the standard of the road infrastructure is sufficient for it to be used in Automated Driving (AD). This paper addresses how the current state of technology could be expanded to reach those goals. Within the project 'System for Teleoperated Road-marking' (SToRM), using the road-marking machine as the system, different operation modes based on teleoperation were discussed and developed. Furthermore, a functional system overview considering both hardware and software elements was experimentally validated with an actual road-marking machine and should serve as a baseline for future efforts in this and similar areas.

cs.RO↗

arXiv2022

Steering Action-aware Adaptive Cruise Control for Teleoperated Driving

In this paper, a steering action-aware Adaptive Cruise Control (ACC) approach for teleoperated road vehicles is proposed. In order to keep the vehicle in a safe state, the ACC approach can override the human operator's velocity control commands. The safe state is defined as a state from which the vehicle can be stopped safely, no matter which steering actions are applied by the operator. This is achieved by first sampling various potential future trajectories. In a second stage, assuming the trajectory with the highest risk, a safe and comfortable velocity profile is optimized. This yields a safe velocity control command for the vehicle. In simulations, the characteristics of the approach are compared to a Model Predictive Control-based approach that is capable of overriding both, the commanded steering angle as well as the velocity. Furthermore, in teleoperation experiments with a 1:10-scale vehicle testbed, it is demonstrated that the proposed ACC approach keeps the vehicle safe, even if the control commands from the operator would have resulted in a collision.

cs.RO↗

arXiv2022

Survey on Teleoperation Concepts for Automated Vehicles

In parallel with the advancement of Automated Driving (AD) functions, teleoperation has grown in popularity over recent years. By enabling remote operation of automated vehicles, teleoperation can be established as a reliable fallback solution for operational design domain limits and edge cases of AD functions. Over the years, a variety of different teleoperation concepts as to how a human operator can remotely support or substitute an AD function have been proposed in the literature. This paper presents the results of a literature survey on teleoperation concepts for road vehicles. Furthermore, due to the increasing interest within the industry, insights on patents and overall company activities in the field of teleoperation are presented.

cs.RO↗

arXiv2021

Open Source Software for Teleoperated Driving

Teleoperation allows a human operator to remotely interact with and control a mobile robot in a dangerous or inaccessible area. Besides well-known applications such as space exploration or search and rescue operations, the application of teleoperation in the area of automated driving, i.e., teleoperated driving (ToD), is becoming more popular. Instead of an in-vehicle human fallback driver, a remote operator can connect to the vehicle using cellular networks and resolve situations that are beyond the automated vehicle (AV)'s operational design domain. Teleoperation of AVs, and unmanned ground vehicles in general, introduces different problems, which are the focus of ongoing research. This paper presents an open source ToD software stack, which was developed for the purpose of carrying out this research. As shown in three demonstrations, the software stack can be deployed with minor overheads to control various vehicle systems remotely.

cs.RO↗

arXiv2021

Adaptive Video Configuration and Bitrate Allocation for Teleoperated Vehicles

Vehicles with autonomous driving capabilities are present on public streets. However, edge cases remain that still require a human in-vehicle driver. Assuming the vehicle manages to come to a safe state in an automated fashion, teleoperated driving technology enables a human to resolve the situation remotely by a control interface connected via a mobile network. While this is a promising solution, it also introduces technical challenges, one of them being the necessity to transmit video data of multiple cameras from the vehicle to the human operator. In this paper, an adaptive video streaming framework specifically designed for teleoperated vehicles is proposed and demonstrated. The framework enables automatic reconfiguration of the video streams of the multi-camera system at runtime. Predictions of variable transmission service quality are taken into account. With the objective to improve visual quality, the framework uses so-called rate-quality models to dynamically allocate bitrates and select resolution scaling factors. Results from deploying the proposed framework on an actual teleoperated driving system are presented.

eess.IV↗

arXiv2021

Systems-Theoretic Safety Assessment of Teleoperated Road Vehicles

Teleoperation is becoming an essential feature in automated vehicle concepts, as it will help the industry overcome challenges facing automated vehicles today. Teleoperation follows the idea to get humans back into the loop for certain rare situations the automated vehicle cannot resolve. Teleoperation therefore has the potential to expand the operational design domain and increase the availability of automated vehicles. This is especially relevant for concepts with no backup driver inside the vehicle. While teleoperation resolves certain issues an automated vehicle will face, it introduces new challenges in terms of safety requirements. While safety and regulatory approval is a major research topic in the area of automated vehicles, it is rarely discussed in the context of teleoperated road vehicles. The focus of this paper is to systematically analyze the potential hazards of teleoperation systems. An appropriate hazard analysis method (STPA) is chosen from literature and applied to the system at hand. The hazard analysis is an essential part in developing a safety concept (e.g., according to ISO26262) and thus far has not been discussed for teleoperated road vehicles.

eess.SY↗

arXiv2020

Systematic Analysis of the Sensor Coverage of Automated Vehicles Using Phenomenological Sensor Models

The objective of this paper is to propose a systematic analysis of the sensor coverage of automated vehicles. Due to an unlimited number of possible traffic situations, a selection of scenarios to be tested must be applied in the safety assessment of automated vehicles. This paper describes how phenomenological sensor models can be used to identify system-specific relevant scenarios. In automated driving, the following sensors are predominantly used: camera, ultrasonic, \radar and \lidarohne. Based on the literature, phenomenological models have been developed for the four sensor types, which take into account phenomena such as environmental influences, sensor properties and the type of object to be detected. These phenomenological models have a significantly higher reliability than simple ideal sensor models and require lower computing costs than realistic physical sensor models, which represents an optimal compromise for systematic investigations of sensor coverage. The simulations showed significant differences between different system configurations and thus support the system-specific selection of relevant scenarios for the safety assessment of automated vehicles.

cs.RO↗

arXiv2020

Automatic Generation of Road Geometries to Create Challenging Scenarios for Automated Vehicles Based on the Sensor Setup

For the offline safety assessment of automated vehicles, the most challenging and critical scenarios must be identified efficiently. Therefore, we present a new approach to define challenging scenarios based on a sensor setup model of the ego-vehicle. First, a static optimal approaching path of a road user to the ego-vehicle is calculated using an A* algorithm. We consider a poor perception of the road user by the automated vehicle as optimal, because we want to define scenarios that are as critical as possible. The path is then transferred to a dynamic scenario, where the trajectory of the road user and the road layout are determined. The result is an optimal road geometry, so that the ego-vehicle can perceive an approaching object as poorly as possible. The focus of our work is on the highway as the Operational Design Domain (ODD).

cs.RO↗

arXiv2020

Identification of Challenging Highway-Scenarios for the Safety Validation of Automated Vehicles Based on Real Driving Data

For a successful market launch of automated vehicles (AVs), proof of their safety is essential. Due to the open parameter space, an infinite number of traffic situations can occur, which makes the proof of safety an unsolved problem. With the so-called scenario-based approach, all relevant test scenarios must be identified. This paper introduces an approach that finds particularly challenging scenarios from real driving data (\RDDwo) and assesses their difficulty using a novel metric. Starting from the highD data, scenarios are extracted using a hierarchical clustering approach and then assigned to one of nine pre-defined functional scenarios using rule-based classification. The special feature of the subsequent evaluation of the concrete scenarios is that it is independent of the performance of the test vehicle and therefore valid for all AVs. Previous evaluation metrics are often based on the criticality of the scenario, which is, however, dependent on the behavior of the test vehicle and is therefore only conditionally suitable for finding "good" test cases in advance. The results show that with this new approach a reduced number of particularly challenging test scenarios can be derived.

cs.RO↗

arXiv2020

Steer with Me: A Predictive, Potential Field-Based Control Approach for Semi-Autonomous, Teleoperated Road Vehicles

Autonomous driving is among the most promising of upcoming traffic safety technologies. Prototypes of autonomous vehicles are already being tested on public streets today. However, while current prototypes prove the feasibility of truly driverless cars, edge cases remain which necessitate falling back on human operators. Teleoperated driving is one solution that would allow a human to remotely control a vehicle via mobile radio networks. Removing in-vehicle drivers would thus allow current autonomous technologies to further progress towards becoming genuinely driverless systems. This paper proposes a new model predictive steering control scheme, specifically designed for semi-autonomous, teleoperated road vehicles. The controller is capable of receiving teleoperator steering commands and, in the case of potential collisions, automatically correcting these commands. Collision avoidance is incorporated into the design using potential fields. A term in the cost function facilitates natural maneuvers, and constraints on the maximum potential keep the vehicle at safe distances from obstacles. This paper also proposes the use of high-order ellipses as a method to accurately model rectangular obstacles in tight driving scenarios. Simulation results support the effectiveness of the proposed approach.

cs.RO↗

arXiv2020

Online Verification Concept for Autonomous Vehicles -- Illustrative Study for a Trajectory Planning Module

Regulatory approval and safety guarantees for autonomous vehicles facing frequent functional updates and complex software stacks, including artificial intelligence, are a challenging topic. This paper proposes a concept and guideline for the development of an online verification module -- the Supervisor -- capable of handling the aforementioned challenges. The concept presented for the establishment of a Supervisor is designed in a way to identify and monitor an extensive list of features contributing to safe operation. As a result, a safe overall (sub)system is attained. Safeguarding a motion planner of an autonomous race vehicle is used to illustrate the procedure and practicability of the framework at hand. The capabilities of the proposed method are evaluated in a scenario-based test environment and on full-scale vehicle data.

eess.SY↗