arXiv subjects

Frank Dionies

Publications and source records attributed to Frank Dionies.

5 recordsLinked to original sources

arXiv2026

High multiplex and precision: the design and development of FLEX, a grid-based fiber positioner with large patrol radius and minimized telecentric error

In next-generation spectroscopic facilities, high-multiplex fiber positioning systems must operate within highly constrained focal surfaces, such as the Wide-Field Spectroscopic Telescope (WST) requiring 30,000+ fibers across a 1.4-meter surface. The Fiber Location EXtender (FLEX) positioner meets these constraints by improving fiber patrol radii while minimizing telecentric error and positioner spacing for dense clustering and high Multi-Object Spectrograph (MOS) multiplexing. The patented FLEX concept utilizes a superelastic nickel-titanium alloy (Nitinol) inside three concentric, geometrically altered tubes. This construction ensures the tip remains parallel with its base during tilting, while internal routing allows the fiber to run freely along the axis to minimize Focal Ratio Degradation (FRD). Designed for a patrol radius of 2.5x the pitch within the WST architecture, the design delivers a maximum patrol radius up to ~22.5 mm with a telecentric error of less than 0.39 degrees. FLEX utilizes three piezoelectric actuators to provide large radial displacements and precise focus adjustment. To scale this architecture, a modular focal surface layout of 90 identical curvilinear modules has been devised. This layout houses 30,240 positioners across a 2-degree hexagonal field-of-view (FoV), accommodating a central hole for an Integral Field pickoff mirror. Only three support struts are required, obscuring just 0.8% of the FoV while allowing full positioner coverage. One in 16 positioners is allocated for high-resolution spectroscopy, with the remainder split among three low-resolution spectrograph sets; all four sets achieve virtually full coverage of the FoV.

astro-ph.IM↗

arXiv2024

Athermal package for OH suppression filters in astronomy part 1: design

We present the design of an athermal package for fiber Bragg grating (FBG)filters fabricated at our Institute for use in ground-based near-infrared (NIR) telescopes. Aperiodic multichannel FBG filters combined with photonic lanterns can effectively filter out extremely bright atmospheric hydroxyl (OH) emission lines that severely hinder ground-based NIR observations. While FBGs have the capability of filtering specific wavelengths with high precision, due to their sensitivity to temperature variations, the success in their performance as OH suppression filters depends on a suitable athermal package that can maintain the deviations of the FBG wavelengths from that of the OH emission lines within sub-picometer accuracy over a temperature range of about 40 K. (i.e. 263 K to 303 K). We aim to develop an athermal package over the aforementioned temperature range for an optical fiber consisting of multichannel FBGs for a maximum filter length of 110 mm. In this work, we demonstrate the complete design methodology of such a package. First, we developed a custom-built test rig to study a wide range of critical physical properties of the fiber, such as strain and temperature sensitivities, elastic modulus, optimum fiber pre-tension, and adhesion performance.Next, we used these data to confirm the athermal response of an FBG bonded on the test rig from room temperature to 313 K. Based on this study, we developed a computer-aided design (CAD) model of the package and analyzed its athermal characteristics with a suitable selection of materials and their nominal dimensions using finite element analysis (FEA). We finally discuss the novel aspects of the design to achieve high-precision thermal stabilization of these filters in the temperature range of interest.

astro-ph.IM↗

arXiv2024

ANDES, the high-resolution spectrograph for the ELT: RIZ Spectrograph preliminary design

We present here the preliminary design of the RIZ module, one of the visible spectrographs of the ANDES instrument 1. It is a fiber-fed high-resolution, high-stability spectrograph. Its design follows the guidelines of successful predecessors such as HARPS and ESPRESSO. In this paper we present the status of the spectrograph at the preliminary design stage. The spectrograph will be a warm, vacuum-operated, thermally controlled and fiber-fed echelle spectrograph. Following the phase A design, the huge etendue of the telescope will be reformed in the instrument with a long slit made of smaller fibers. We discuss the system design of the spectrographs system.

astro-ph.IM↗

arXiv2021

TAUKAM: a new prime-focus camera for the Tautenburg Schmidt Telescope

TAUKAM stands for "TAUtenburg KAMera", which will become the new prime-focus imager for the Tautenburg Schmidt telescope. It employs an e2v 6kx6k CCD and is under manufacture by Spectral Instruments Inc. We describe the design of the instrument and the auxiliary components, its specifications as well as the concept for integrating the device into the telescope infrastructure. First light is foreseen in 2017. TAUKAM will boost the observational capabilities of the telescope for what concerns optical wide-field surveys.

astro-ph.IM↗

arXiv2012

4MOST - 4-metre Multi-Object Spectroscopic Telescope

The 4MOST consortium is currently halfway through a Conceptual Design study for ESO with the aim to develop a wide-field (>3 square degree, goal >5 square degree), high-multiplex (>1500 fibres, goal 3000 fibres) spectroscopic survey facility for an ESO 4m-class telescope (VISTA). 4MOST will run permanently on the telescope to perform a 5 year public survey yielding more than 20 million spectra at resolution R~5000 (λ=390-1000 nm) and more than 2 million spectra at R~20,000 (395-456.5 nm & 587-673 nm). The 4MOST design is especially intended to complement three key all-sky, space-based observatories of prime European interest: Gaia, eROSITA and Euclid. Initial design and performance estimates for the wide-field corrector concepts are presented. We consider two fibre positioner concepts, a well-known Phi-Theta system and a new R-Theta concept with a large patrol area. The spectrographs are fixed configuration two-arm spectrographs, with dedicated spectrographs for the high- and low-resolution. A full facility simulator is being developed to guide trade-off decisions regarding the optimal field-of-view, number of fibres needed, and the relative fraction of high-to-low resolution fibres. Mock catalogues with template spectra from seven Design Reference Surveys are simulated to verify the science requirements of 4MOST. The 4MOST consortium aims to deliver the full 4MOST facility by the end of 2018 and start delivering high-level data products for both consortium and ESO community targets a year later with yearly increments.

astro-ph.IM↗