arXiv subjects

Frank Hohls

Publications and source records attributed to Frank Hohls.

At least 19 recordsLinked to original sources

arXiv2022

Two electrons interacting at a mesoscopic beam splitter

The non-linear response of a beam splitter to the coincident arrival of interacting particles enables numerous applications in quantum engineering and metrology yet poses considerable challenge to achieve focused interactions on the individual particle level. Here we probe the coincidence correlations at a mesoscopic constriction between individual ballistic electrons in a system with unscreened Coulomb interactions and introduce concepts to quantify the associated parametric non-linearity. The full counting statistics of joint detection allows us to explore the interaction-mediated energy exchange. We observe an increase from 50\% up to 70\% in coincidence counts between statistically indistinguishable on demand sources, and a correlation signature consistent with independent tomography of the electron emission. Analytical modeling and numerical simulations underpin consistency of the experimental results with Coulomb interactions between two electrons counterpropagating in a dispersive quadratic saddle, and demonstrate interactions sufficiently strong, $U/(\hbar \omega) > 10$, to enable single-shot in-flight detection and quantum logic gates.

cond-mat.mes-hall↗

arXiv2022

Controlling the error mechanism in a tunable-barrier non-adiabatic charge pump by dynamic gate compensation

Single-electron pumps based on tunable-barrier quantum dots are the most promising candidates for a direct realization of the unit ampere in the recently revised SI: they are simple to operate and show high precision at high operation frequencies. The current understanding of the residual transfer errors at low temperature is based on the evaluation of backtunneling effects in the decay cascade model. This model predicts a strong dependence on the ratio of the time dependent changes in the quantum dot energy and the tunneling barrier transparency. Here we employ a two-gate operation scheme to verify this prediction and to demonstrate control of the backtunneling error. We derive and experimentally verify a quantitative prediction for the error suppression, thereby confirming the basic assumptions of the backtunneling (decay cascade) model. Furthermore, we demonstrate a controlled transition from the backtunneling dominated regime into the thermal (sudden decoupling) error regime. The suppression of transfer errors by several orders of magnitude at zero magnetic field was additionally verified by a sub-ppm precision measurement.

cond-mat.mes-hall↗

arXiv2020

Roadmap for gallium arsenide spin qubits

Gate-defined quantum dots in gallium arsenide (GaAs) have been used extensively for pioneering spin qubit devices due to the relative simplicity of fabrication and favourable electronic properties such as a single conduction band valley, a small effective mass, and stable dopants. GaAs spin qubits are readily produced in many labs and are currently studied for various applications, including entanglement, quantum non-demolition measurements, automatic tuning, multi-dot arrays, coherent exchange coupling, and teleportation. Even while much attention is shifting to other materials, GaAs devices will likely remain a workhorse for proof-of-concept quantum information processing and solid-state experiments.

cond-mat.mes-hall↗

arXiv2019

Quantum dot state initialization by control of tunneling rates

We study the loading of electrons into a quantum dot with dynamically controlled tunnel barriers. We introduce a method to measure tunneling rates for individual discrete states and to identify their relaxation paths. Exponential selectivity of the tunnel coupling enables loading into specific quantum dot states by tuning independently energy and rates. While for the single-electron case orbital relaxation leads to fast transition into the ground state, for electron pairs triplet-to-singlet relaxation is suppressed by long spin-flip times. This enables the fast gate-controlled initialization of either a singlet or a triplet electron pair state in a quantum dot with broad potential applications in quantum technologies.

cond-mat.mes-hall↗

arXiv2018

Homogeneous Large-area Quasi-freestanding Monolayer and Bilayer Graphene on SiC

In this study, we first show that the argon flow during epitaxial graphene growth is an important parameter to control the quality of the buffer and the graphene layer. Atomic force microscopy (AFM) and low-energy electron diffraction (LEED) measurements reveal that the decomposition of the SiC substrate strongly depends on the Ar mass flow rate while pressure and temperature are kept constant. Our data are interpreted by a model based on the competition of the SiC decomposition rate, controlled by the Ar flow, with a uniform graphene buffer layer formation under the equilibrium process at the SiC surface. The proper choice of a set of growth parameters allows the growth of defect-free, ultra-smooth and coherent graphene-free buffer layer and bilayer-free monolayer graphene sheets which can be transformed into large-area high-quality quasi-freestanding monolayer and bilayer graphene (QFMLG and QFBLG) by hydrogen intercalation. AFM, scanning tunneling microscopy (STM), Raman spectroscopy and electronic transport measurements underline the excellent homogeneity of the resulting quasi-freestanding layers. Electronic transport measurements in four-point probe configuration reveal a homogeneous low resistance anisotropy on both μm- and mm scales.

cond-mat.mtrl-sci↗

arXiv2016

Nonequilibrium mesoscopic conductance fluctuations as the origin of 1/f noise in epitaxial graphene

We investigate the 1/f noise properties of epitaxial graphene devices at low temperatures as a function of temperature, current and magnetic flux density. At low currents, an exponential decay of the 1/f noise power spectral density with increasing temperature is observed that indicates mesoscopic conductance fluctuations as the origin of 1/f noise at temperatures below 50 K. At higher currents, deviations from the typical quadratic current dependence and the exponential temperature dependence occur as a result of nonequilibrium conditions due to current heating. By applying the theory of Kubakaddi [S. S. Kubakaddi, Phys. Rev. B 79, 075417 (2009)], a model describing the 1/f noise power spectral density of nonequilibrium mesoscopic conductance fluctuations in epitaxial graphene is developed and used to determine the energy loss rate per carrier. In the regime of Shubnikov-de Haas oscillations a strong increase of 1/f noise is observed, which we attribute to an additional conductance fluctuation mechanism due to localized states in quantizing magnetic fields. When the device enters the regime of quantized Hall resistance, the 1/f noise vanishes. It reappears if the current is increased and the quantum Hall breakdown sets in.

cond-mat.mes-hall↗

arXiv2016

Comeback of epitaxial graphene for electronics: large-area growth of bilayer-free graphene on SiC

We present a new fabrication method for epitaxial graphene on SiC which enables the growth of ultra-smooth defect- and bilayer-free graphene sheets with an unprecedented reproducibility, a necessary prerequisite for wafer-scale fabrication of high quality graphene-based electronic devices. The inherent but unfavorable formation of high SiC surface terrace steps during high temperature sublimation growth is suppressed by rapid formation of the graphene buffer layer which stabilizes the SiC surface. The enhanced nucleation is enforced by decomposition of polymer adsorbates which act as a carbon source. With most of the steps well below 0.75 nm pure monolayer graphene without bilayer inclusions is formed with lateral dimensions only limited by the size of the substrate. This makes the polymer assisted sublimation growth technique the most promising method for commercial wafer scale epitaxial graphene fabrication. The extraordinary electronic quality is evidenced by quantum resistance metrology at 4.2 K with until now unreached precision and high electron mobilities on mm scale devices.

cond-mat.mtrl-sci↗

arXiv2016

Dopant-controlled single-electron pumping through a metallic island

We investigate a hybrid metallic island / single dopant electron pump based on fully-depleted silicon on insulator technology. Electron transfer between the central metallic island and the leads is controlled by resonant tunneling through single phosphorus dopants in the barriers. Top gates above the barriers are used control the resonance conditions. Applying radio frequency signals to the gates, non-adiabatic quantized electron pumping is achieved. A simple deterministic model is presented and confirmed by comparing measurements with simulations.

cond-mat.mes-hall↗

arXiv2015

Validation of a quantized-current source with 0.2 ppm uncertainty

We report on high-accuracy measurements of quantized current, sourced by a tunable-barrier single-electron pump at frequencies $f$ up to $1$ GHz. The measurements were performed with a new picoammeter instrument, traceable to the Josephson and quantum Hall effects. Current quantization according to $I=ef$ with $e$ the elementary charge was confirmed at $f=545$ MHz with a total relative uncertainty of 0.2 ppm, improving the state of the art by about a factor of 5. For the first time, the accuracy of a possible future quantum current standard based on single-electron transport was experimentally validated to be better than the best realization of the ampere within the present SI.

cond-mat.mes-hall↗

arXiv2014

Partitioning of on-demand electron pairs

We demonstrate the high fidelity splitting of electron pairs emitted on demand from a dynamic quantum dot by an electronic beam splitter. The fidelity of pair splitting is inferred from the coincidence of arrival in two detector paths probed by a measurement of the partitioning noise. The emission characteristic of the on-demand electron source is tunable from electrons being partitioned equally and independently to electron pairs being split with a fidelity of 90%. For low beam splitter transmittance we further find evidence of pair bunching violating statistical expectations for independent fermions.

cond-mat.mes-hall↗

arXiv2014

Bilayer Graphene Quantum Dot Defined by Topgates

We investigate the application of nanoscale topgates on exfoliated bilayer graphene to define quantum dot devices. At temperatures below 500 mK the conductance underneath the grounded gates is suppressed, which we attribute to nearest neighbour hopping and strain-induced piezoelectric fields. The gate-layout can thus be used to define resistive regions by tuning into the corresponding temperature range. We use this method to define a quantum dot structure in bilayer graphene showing Coulomb blockade oscillations consistent with the gate layout.

cond-mat.mes-hall↗

arXiv2013

A self-referenced single-electron quantized-current source

With the anticipated redefinition of the international system of units (SI) the base units will be linked to fundamental constants of nature [1]. As for the electrical base unit "Ampere", it will be linked to the elementary charge e, requiring a corresponding quantum standard [2, 3]. Many concepts for such a standard have been investigated [4-14] relying on controlling the time-dependent tunnelling of electrons. However, the stochastic nature of quantum mechanical tunnelling intrinsically evokes uncontrolled deviations from the nominally quantized current. Alternatively, the counting of electrons [15, 16] has been explored but is severely limited in current amplitude and uncertainty by the low detector bandwidth. The late M. Wulf proposed [17] that this fundamental problem of electrical quantum metrology could be overcome by combining serial single-electron pumps with charge detectors allowing the generation of a quantized current and the in-situ detection of its stochastic deviations. Here, we experimentally demonstrate such quantized-current generation with in-situ detection of tunnelling errors at low frequencies and a reduction of the total current uncertainty by more than one order of magnitude. After frequency scaling this should enable a validated primary standard for the redefined SI base unit Ampere.

cond-mat.mes-hall↗

arXiv2013

Spin-dependent shot noise enhancement in a quantum dot

The spin-dependent dynamical blockade was investigated in a lateral quantum dot in a magnetic field. Spin-polarized edge channels in the two-dimensional leads and the spatial distribution of Landau orbitals in the dot modulate the tunnel coupling of the quantum dot level spectrum. In a measurement of the electron shot noise we observe a pattern of super-Poissonian noise which is correlated to the spin-dependent competition between different transport channels.

cond-mat.mes-hall↗

arXiv2012

Counting statistics for electron capture in a dynamic quantum dot

We report non-invasive single-charge detection of the full probability distribution $P_n$ of the initialization of a quantum dot with $n$ electrons for rapid decoupling from an electron reservoir. We analyze the data in the context of a model for sequential tunneling pinch-off, which has generic solutions corresponding to two opposing mechanisms. One limit considers sequential "freeze out" of an adiabatically evolving grand canonical distribution, the other one is an athermal limit equivalent to the solution of a generalized decay cascade model. We identify the athermal capturing mechanism in our sample, testifying to the high precision of our combined theoretical and experimental methods. The distinction between the capturing mechanisms allows to derive efficient experimental strategies for improving the initialization.

cond-mat.mes-hall↗

arXiv2012

Measurement of finite-frequency current statistics in a single-electron transistor

Electron transport in nano-scale structures is strongly influenced by the Coulomb interaction which gives rise to correlations in the stream of charges and leaves clear fingerprints in the fluctuations of the electrical current. A complete understanding of the underlying physical processes requires measurements of the electrical fluctuations on all time and frequency scales, but experiments have so far been restricted to fixed frequency ranges as broadband detection of current fluctuations is an inherently difficult experimental procedure. Here we demonstrate that the electrical fluctuations in a single electron transistor (SET) can be accurately measured on all relevant frequencies using a nearby quantum point contact for on-chip real-time detection of the current pulses in the SET. We have directly measured the frequency-dependent current statistics and hereby fully characterized the fundamental tunneling processes in the SET. Our experiment paves the way for future investigations of interaction and coherence induced correlation effects in quantum transport.

cond-mat.mes-hall↗

arXiv2011

A quantized current source with mesoscopic feedback

We study a mesoscopic circuit of two quantized current sources, realized by non-adiabatic single- electron pumps connected in series with a small micron-sized island in between. We find that quantum transport through the second pump can be locked onto the quantized current of the first one by a feedback due to charging of the mesoscopic island. This is confirmed by a measurement of the charge variation on the island using a nearby charge detector. Finally, the charge feedback signal clearly evidences loading into excited states of the dynamic quantum dot during single-electron pump operation.

cond-mat.mes-hall↗

arXiv2011

Integrated quantized electronics: a semiconductor quantized voltage source

The Josephson effect in superconductors links a quantized output voltage Vout = f \cdot(h/2e) to the natural constants of the electron's charge e, Planck's constant h, and to an excitation frequency f with important applications in electrical quantum metrology. Also semiconductors are routinely applied in electrical quantum metrology making use of the quantum Hall effect. However, despite their broad range of further applications e.g. in integrated circuits, quantized voltage generation by a semiconductor device has never been obtained. Here we report a semiconductor quantized voltage source generating quantized voltages Vout = f\cdot(h/e). It is based on an integrated quantized circuit of a single electron pump operated at pumping frequency f and a quantum Hall device monolithically integrated in series. The output voltages of several \muV are expected to be scalable by orders of magnitude using present technology. The device might open a new route towards the closure of the quantum metrological triangle. Furthermore it represents a universal electrical quantum reference allowing to generate quantized values of the three most relevant electrical units of voltage, current, and resistance based on fundamental constants using a single device.

cond-mat.mes-hall↗

arXiv2010

High-order cumulants in the counting statistics of asymmetric quantum dots

Measurements of single electron tunneling through a quantum dot using a quantum point contact as charge detector have been performed for very long time traces with very large event counts. This large statistical basis is used for a detailed examination of the counting statistics for varying symmetry of the quantum dot system. From the measured statistics we extract high order cumulants describing the distribution. Oscillations of the high order cumulants are observed when varying the symmetry. We compare this behavior to the observed oscillation in time dependence and show that the variation of both system variables lead to the same kind of oscillating response.

cond-mat.mes-hall↗