arXiv subjects

Frank Setzpfandt

Publications and source records attributed to Frank Setzpfandt.

46 records · Page 3Linked to original sources

arXiv2020

A fully automated dual-tip scanning near-field optical microscope for localized optical excitation and detection in the visible and near-infrared

Near-field optical microscopes with two independent tips for simultaneous excitation and detection can be essential tools for studying localized optical phenomena on the subwavelength scale. Here, we report on the implementation of a fully automated and robust dual-tip scanning near-field optical microscope (SNOM), in which the excitation tip is stationary, while the detection tip automatically scans the surrounding area. To monitor and control the distance between the two probes, mechanical interactions due to shear forces are used. We experimentally investigate suitable scan parameters and find that the automated dual-tip SNOM can operate stably for a wide range of parameters. To demonstrate the potential of the automated dual-tip SNOM, we characterize the propagation of surface plasmon polaritons on a gold film for visible and near-infrared wavelengths. The good agreement of the measurements with numerical simulations verifies the capability of the dual-tip SNOM for the near-field characterization of localized optical phenomena.

physics.ins-det↗

arXiv2020

Spectral mapping of polarization-correlated photon-pair sources using quantum-classical correspondence

Direct spectral characterization of a quantum photon-pair source usually involves cumbersome, costly, and time-consuming detection issues. In this study, we experimentally characterize the spectral properties of a type-II phase-matched spontaneous parametric down-conversion (SPDC) source based on a titanium-diffused periodically poled lithium niobate (Ti:PPLN) waveguide. The characterization of the spectral information of the generated cross-polarized photon pairs is of importance for the use of such sources in applications including quantum information and communication. We demonstrate that the joint spectral intensity of the cross-polarized photon-pair source can be fully reconstructed using the quantum-classical correspondence through classical sum-frequency generation (SFG) measurements. This technique, which uses a much less complex detection system for visible light, opens the possibility of fast monitoring and control of the quantum state of (polarization-correlated) photon-pair sources to facilitate the realization of a stable and high-usability quantum source.

quant-ph↗

arXiv2020

Nanostructure-modulated planar high spectral resolution spectro-polarimeter

We present a planar spectro-polarimeter based on Fabry-P{é}rot cavities with embedded polarization-sensitive high-index nanostructures. A $7~μ$m-thick spectro-polarimetric system for 3 spectral bands and 2 linear polarization states is experimentally demonstrated. Furthermore, an optimal design is theoretically proposed, estimating that a system with a bandwidth of 127~nm and a spectral resolution of 1~nm is able to reconstruct the first three Stokes parameters \textcolor{black}{with a signal-to-noise ratio of -13.14~dB with respect to the the shot noise limited SNR}. The pixelated spectro-polarimetric system can be directly integrated on a sensor, thus enabling applicability in a variety of miniaturized optical devices, including but not limited to satellites for Earth observation.

physics.optics↗

arXiv2020

Color filter arrays based on dielectric metasurface elements

Digital imaging has been steadily improving over the past decades and we are moving towards a wide use of multi- and hyperspectral cameras. A key component of such imaging systems are color filter arrays, which define the spectrum of light detected by each camera pixel. Hence, it is essential to develop a variable, robust and scalable way for controlling the transmission of light. Nanostructured surfaces, also known as metasurfaces, offer a promising solution as their transmission spectra can be controlled by shaping the wavelength-dependent scattering properties of their constituting elements. Here we present, metasurfaces based on silicon nanodisks, which provide filter functions with amplitudes reaching 70-90% of transmission, and well suitable for RGB and CMY color filter arrays, the initial stage towards the further development of hyperspectral filters. We suggest and discuss possible ways to expand the color gamut and improve the color values of such optical filters.

physics.optics↗

arXiv2020

Direct and High-Throughput Fabrication of Mie-Resonant Metasurfaces via Single-Pulse Laser Interference

High-index dielectric metasurfaces featuring Mie-type electric and magnetic resonances have been of a great interest in a variety of applications such as imaging, sensing, photovoltaics and others, which led to the necessity of an efficient large-scale fabrication technique. To address this, here we demonstrate the use of single-pulse laser interference for direct patterning of an amorphous silicon film into an array of Mie resonators. The proposed technique is based on laser-interference-induced dewetting. A precise control of the laser pulse energy enables the fabrication of ordered dielectric metasurfaces in areas spanning tens of micrometers and consisting of thousands of hemispherical nanoparticles with a single laser shot. The fabricated nanoparticles exhibit a wavelength-dependent optical response with a strong electric dipole signature. Variation of the pre-deposited silicon film thickness allows tailoring of the resonances in the targeted visible and infrared spectral ranges. Such direct and high-throughput fabrication paves the way towards a simple realization of spatially invariant metasurface-based devices.

physics.optics↗

arXiv2019

Laser-Induced Spatially-Selective Tailoring of High-Index Dielectric Metasurfaces

Optically resonant high-index dielectric metasurfaces featuring Mie-type electric and magnetic resonances are usually fabricated by means of planar technologies, which limit the degrees of freedom in tunability and scalability of the fabricated systems. Therefore, we propose a complimentary post-processing technique based on ultrashort ($\leq$ 10 ps) laser pulses. The process involves thermal effects: crystallization and reshaping, while the heat is localized by a high-precision positioning of the focused laser beam. Moreover, for the first time, the resonant behavior of dielectric metasurface elements is exploited to engineer a specific absorption profile, which leads to a spatially-selective heating and a customized modification. Such technique has a potential to reduce the complexity in the fabrication of non-uniform metasurface-based optical elements. Two distinct cases, a spatial pixelation of a large-scale metasurface and a height modification of metasurface elements, are explicitly demonstrated.

physics.optics↗

arXiv2018

Sub-micrometer Nanostructure-based RGB Filters for CMOS Image Sensors

Digital color imaging relies on spectral filters on top of a pixelated sensor, such as a CMOS image sensor. An important parameter of imaging devices is their resolution, which depends on the size of the pixels. For many applications, a high resolution is desirable, consequently requiring small spectral filters. Dielectric nanostructures, due to their resonant behavior and its tunability, offer the possibility to be assembled into flexible and miniature spectral filters, which could potentially replace conventional pigmented and dye-based color filters. In this paper, we demonstrate the generation of transmissive structural colors based on uniform-height amorphous silicon nanostructures. We optimize the structures for the primary RGB colors and report the construction of sub-micrometer RGB filter arrays for a pixel size down to 0.5 μm.

physics.optics↗

arXiv2016

Resonantly enhanced second-harmonic generation using III-V semiconductor all-dielectric metasurfaces

Nonlinear optical phenomena in nanostructured materials have been challenging our perceptions of nonlinear optical processes that have been explored since the invention of lasers. For example, the ability to control optical field confinement, enhancement, and scattering almost independently, allows nonlinear frequency conversion efficiencies to be enhanced by many orders of magnitude compared to bulk materials. Also, the subwavelength length scale renders phase matching issues irrelevant. Compared with plasmonic nanostructures, dielectric resonator metamaterials show great promise for enhanced nonlinear optical processes due to their larger mode volumes. Here, we present, for the first time, resonantly enhanced second-harmonic generation (SHG) using Gallium Arsenide (GaAs) based dielectric metasurfaces. Using arrays of cylindrical resonators we observe SHG enhancement factors as large as 104 relative to unpatterned GaAs. At the magnetic dipole resonance we measure an absolute nonlinear conversion efficiency of ~2X10^(-5) with ~3.4 GW/cm2 pump intensity. The polarization properties of the SHG reveal that both bulk and surface nonlinearities play important roles in the observed nonlinear process.

physics.optics↗

arXiv2015

Tunable generation of entangled photons in a nonlinear directional coupler

The on-chip integration of quantum light sources has enabled the realization of complex quantum photonic circuits. However, for the practical implementation of such circuits in quantum information applications it is crucial to develop sources delivering entangled quantum photon states with on-demand tunability. Here we propose and experimentally demonstrate the concept of a widely tunable quantum light source based on spontaneous parametric down-conversion in a nonlinear directional coupler. We show that spatial photon-pair correlations and entanglement can be reconfigured on-demand by tuning the phase difference between the pump beams and the phase mismatch inside the structure. We demonstrate the generation of split states, robust N00N states, various intermediate regimes and biphoton steering. This fundamental scheme provides an important advance towards the realization of reconfigurable quantum circuitry.

quant-ph↗

arXiv2014

Efficient supercontinuum generation in quadratic nonlinear waveguides without quasi-phase matching

Efficient supercontinuum generation (SCG) requires excitation of solitons at the pump laser wavelength. Quadratic nonlinear waveguides may support an effective self-defocusing nonlinearity so solitons can directly be generated at common ultrafast laser wavelengths without any waveguide dispersion engineering. We here experimentally demonstrate efficient SCG in a standard lithium niobate (LN) waveguide without using quasi-phase matching (QPM). By using femtosecond pumps with wavelengths in the $1.25-1.5 μ\rm m$ range, where LN has normal dispersion and thus supports self-defocusing solitons, octave-spanning SCG is observed. An optimized mid-IR waveguide design is expected to support even broader spectra. The QPM-free design reduces production complexity, allows longer waveguides, limits undesired spectral resonances and effectively allows using nonlinear crystals where QPM is inefficient or impossible. This result is important for mid-IR SCG, where QPM-free self-defocusing waveguides in common mid-IR nonlinear crystals can support solitons directly at mid-IR ultrafast laser wavelengths, where these waveguides have normal dispersion.

physics.optics↗