arXiv subjects

Frank Zimmermann

Publications and source records attributed to Frank Zimmermann.

At least 19 recordsLinked to original sources

arXiv2026

Updates on Impedance Studies for the FCC-ee High Energy Booster

Following the Future Circular Collider (FCC) Feasibility Study completion, the impedance model for the FCC-ee High-Energy Booster (HEB) has been significantly expanded beyond the initial copper vacuum pipe resistive wall analysis. This paper presents a comprehensive impedance and wake budget incorporating RF cavities, bellows, and beam position monitors, evaluated through 3D electromagnetic simulations and analytical methods. The updated model provides the basis for future beam dynamics studies, including transverse coupled bunch instability analyses and single bunch tracking simulations. The present work focuses on the construction and comparison of the main impedance and wake contributions, identifying the dominant sources and the components requiring further investigation. These results will be used to refine the HEB collective effects studies and to support future assessments of instability margins and mitigation requirements.

physics.acc-ph↗

arXiv2026

Quasi-Strong-Strong Beam-Beam Modeling of Bootstrapping Injection in FCC-ee

The FCC-ee is designed to operate with exceptionally strong beam--beam interactions, making continuous injection a critical and non-trivial aspect of its operation. During the injection process, an unavoidable charge imbalance between the two colliding beams leads to asymmetric beam--beam forces, potentially compromising transverse stability. In this paper, we introduce a quasi-strong-strong (QSS) beam--beam scheme, implemented in the SAD simulation framework. The method preserves a self-consistent beam--beam lens by coupling paired weak--strong simulations, while avoiding the computational cost of full strong--strong tracking. The injection process is modeled as a gradual increase of the stored bunch population, allowing the isolated study of beam--beam--driven optics deformation under charge imbalance. Using the QSS approach, we investigate the feasibility of bootstrapping injection in the Z, W, and H operating modes of FCC-ee. Stable injection paths up to the nominal bunch population are identified in the W and H modes. In contrast, in the explored parameter region, the Z mode exhibits saturation of the stored population below the nominal value.

physics.acc-ph↗

arXiv2026

Synchrotron radiation leveling at future circular hadron colliders

Luminosity leveling to limit the event pile up is a key ingredient of the LHC luminosity upgrade, the High-Luminosity LHC (HL-LHC). For a future circular hadron collider, such as the FCC-hh, operating at a centre-of-mass energy of 70-90 TeV, synchrotron radiation becomes significant, with radiation damping times of the order of one or a few hours. The rapid shrinkage of the emittance may call for a leveling of the beam-beam tune shift or of the event pile up, as previously explored. However, the strong synchrotron radiation emitted inside the cold superconducting magnets also represents a significant heat load and is likely to limit the total beam current. In this article, we discuss a new approach, namely synchrotron radiation power leveling, where the beam energy is adjusted during a physics store, either continually or in a few discrete steps, while the beam current decreases, so as to keep the synchrotron radiation power at or below a certain limiting value. In this way, both peak and integrated luminosity of the FCC-hh are increased, compared with operation at a fixed beam energy. The FCC-hh detectors, and in particular the physics event analysis, need to be prepared for this novel mode of operation. This article presents two example running scenarios for synchrotron radiation leveling at the FCC-hh. While not greatly reducing the integrated luminosity at highest collision energy, synchrotron-radiation leveling can significantly increase the number of events for key processes already occurring at lower energy. As an example, we show that it raises the number of di-Higgs production events by 60% or more.

physics.acc-ph↗

arXiv2025

FCC-ee Lessons from SuperKEKB

SuperKEKB has achieved significantly higher specific luminosity than its predecessor KEKB, and it has proven a much more sustainable machine. It has successfully demonstrated several key design elements of FCC-ee. The design luminosity has not yet been reached, however. This observation is often (mistakenly) used to put into question the reliability of the FCC-ee design luminosity. In this note we review the accomplishments, challenges and obstacles of SuperKEKB, and compare these with the FCC-ee design.

physics.acc-ph↗

arXiv2025

Smallest vertical beam sizes achieved in high-energy accelerators

FCC-ee aims at colliding electrons and positrons with vertical rms beam sizes between 30 and 50 nm with beam energies extending from about 40 GeV to 182.5 GeV. In this report, we collect experimental results of different high energy accelerator projects with comparable design vertical beam sizes.

physics.acc-ph↗

arXiv2023

Using the LHeC ERL to generate high-energy photons

The Large Hadron electron Collider (LHeC) is a proposed future particle physics project colliding 60 GeV electrons from a six-pass recirculating energy-recovery linac (ERL) with 7 TeV protons stored in the LHC. The ERL technology allows for much higher beam current and, therefore, higher luminosity than a traditional linac. The high-current, high-energy electron beam can also be used to drive a free electron laser (FEL). In this contribution, we examine how the LHeC ERL can serve as a source of high-energy photons for studies in nuclear physics, high-energy physics, Axion detection, dark energy, and protein crystallography. In the first section, we discuss the performance of the LHeC-based FEL, operated in the SASE mode for generating photon pulses at wavelengths ranging from 200 keV to 600 keV. In the second section, we investigate photon production via Laser Compton scattering (LCS).

physics.acc-ph↗

arXiv2023

FCC-ee Status and Overview

We report on the Future Circular Collider (FCC) Feasibility Study, the mid-term review in autumn 2023, and the longer term timeline.

physics.acc-ph↗

arXiv2023

Optics design and correction challenges for the high energy booster of FCC-ee

One of the major upcoming challenges in particle physics is achieving precise measurements of the Z, W, and H bosons, as well as the top quark. To meet these targets, the next e\textsuperscript{+}e\textsuperscript{-} collider complex, FCC-ee, will need to achieve unprecedented luminosities. The FCC-IS European Study is investigating the feasibility of these challenges, with a cornerstone of the study being the design and optimization of the high-energy booster (HEB). This paper provides an update on the status of the HEB of FCC-ee in light of recent developments in the injector and collider survey, as well as an overview of ongoing work on longitudinal stability and design robustness in relation to field, alignment, and diagnostics errors. Constraints and effects related to the design frequency of the accelerating cavities, as well as collective effects, are also highlighted. Lastly, the paper presents an investigation into an alternative arcs cell design.

physics.acc-ph↗

arXiv2022

The Development of Energy-Recovery Linacs

Energy-recovery linacs (ERLs) have been emphasised by the recent (2020) update of the European Strategy for Particle Physics as one of the most promising technologies for the accelerator base of future high-energy physics. The current paper has been written as a base document to support and specify details of the recently published European roadmap for the development of energy-recovery linacs. The paper summarises the previous achievements on ERLs and the status of the field and its basic technology items. The main possible future contributions and applications of ERLs to particle and nuclear physics as well as industrial developments are presented. The paper includes a vision for the further future, beyond 2030, as well as a comparative data base for the main existing and forthcoming ERL facilities. A series of continuous innovations, such as on intense electron sources or high-quality superconducting cavity technology, will massively contribute to the development of accelerator physics at large. Industrial applications are potentially revolutionary and may carry the development of ERLs much further, establishing another shining example of the impact of particle physics on society and its technical foundation with a special view on sustaining nature.

physics.acc-ph↗

arXiv2022

"Colliders or Bust"

Charged-particle colliders have proven key instruments of discovery in high-energy physics. Pushing the frontiers of our knowledge ever further has relied on, and still keeps calling for, ever better performance and novel techniques. During more than four decades, Swapan Chattopadhyay has made numerous essential contributions to this endeavour. Often far ahead of his time, he helped advance many areas of collider development, notably in the domains of stochastic cooling, the development of asymmetric B factories, the design of next- and next-next-generation of high-energy colliders, and the harnessing of energy-recovery for particle colliders.

physics.acc-ph↗

arXiv2022

PetaVolts per meter Plasmonics: Snowmass21 White Paper

Plasmonic modes offer the potential to achieve PetaVolts per meter fields, that would transform the current paradigm in collider development in addition to non-collider searches in fundamental physics. PetaVolts per meter plasmonics relies on collective oscillations of the free electron Fermi gas inherent in the conduction band of materials that have a suitable combination of constituent atoms and ionic lattice structure. As the conduction band free electron density, at equilibrium, can be as high as $\rm 10^{24}cm^{-3}$, electromagnetic fields of the order of $\rm 0.1 \sqrt{\rm n_0(10^{24}cm^{-3})} ~ PVm^{-1}$ can be sustained by plasmonic modes. Engineered materials not only allow highly tunable material properties but quite critically make it possible to overcome disruptive instabilities that dominate the interactions in bulk media. Due to rapid shielding by the free electron Fermi gas, dielectric effects are strongly suppressed. Because the ionic lattice, the corresponding electronic energy bands and the free electron gas are governed by quantum mechanical effects, comparisons with plasmas are merely notional. Based on this framework, it is critical to address various challenges that underlie PetaVolts per meter plasmonics including stable excitation of plasmonic modes while accounting for their effects on the ionic lattice and the electronic energy band structure over femtosecond timescales. We summarize the ongoing theoretical and experimental efforts as well as map out strategies for the future. Extreme plasmonic fields can shape the future by not only bringing tens of TeV to multi-PeV center-of-mass-energies within reach but also by opening novel pathways in non-collider HEP. In view of this promise, we invite the scientific community to help realize the immense potential of PV/m plasmonics and call for significant expansion of the US and international R\&D program.

physics.acc-ph↗

arXiv2022

Mitigation of Electron Cloud Effects in the FCC-ee Collider

Electron clouds forming inside the beam vacuum chamber due to photoemission and secondary emission may limit the accelerator performance. Specifically, the electron clouds can blow up the vertical emittance of a positron beam, through a head-tail-type single-bunch instability, if the central electron density exceeds a certain threshold value, that can be estimated analytically. Using the codes PyECLOUD and VSim, we carried out detailed simulations of the electron-cloud build up for the main arcs and the damping ring of the FCC-ee collider, in order to identify the effective photoemission rate and secondary emission yield required for achieving and maintaining the design emittance. To this end, we present the simulated electron density at the centre of the beam pipe for various bunch spacings, secondary emission yields, and photoemission parameters, in the damping ring and in the arcs of the collider positron ring. To gain further insight into the underlying dynamics, the obtained spatial and energy distributions of the cloud electrons are illustrated as a function of time. In addition, we compare results obtained for two different secondary emission models ("Furman-Pivi" and "ECLOUD"), thereby indicating the uncertainty inherent in this type of study, without any prototype vacuum chambers yet available. We also point out a few situations where the two secondary-emission models yield similar density values. Finally, based on our simulation results for two different design variants, we conclude that the new parameter baseline of the FCC-ee will facilitate electron-cloud mitigation.

physics.acc-ph↗

arXiv2022

A very high energy hadron collider on the Moon

The long-term prospect of building a hadron collider around the circumference of a great circle of the Moon is sketched. A Circular Collider on the Moon (CCM) of $\sim$11000 km in circumference could reach a proton-proton center-of-mass collision energy of 14 PeV -- a thousand times higher than the Large Hadron Collider at CERN -- optimistically assuming a dipole magnetic field of 20 T. Several aspects of such a project are presented, including siting, construction, availability of necessary materials on the Moon, and powering, as well as a discussion of future studies and further information needed to determine the more concrete feasibility of each. Machine parameters and vacuum requirements are explored, and an injection scheme is delineated. Other unknowns are set down. Due to the strong interest from multiple organizations in establishing a permanent Moon presence, a CCM could be the (next-to-) next-to-next-generation discovery machine for high-energy particle physics and a natural successor to next-generation machines, such as the proposed Future Circular Collider at CERN or a Super Proton-Proton Collider in China, and other future machines, such as a Collider in the Sea, in the Gulf of Mexico. A CCM would serve as an important stepping stone towards a Planck-scale collider sited in our Solar System.

hep-ex↗

arXiv2021

Challenges for the interaction region design of the Future Circular Collider FCC-ee

The FCC-ee is a proposed future high-energy, high-intensity and high-precision lepton collider. Here, we present the latest development for the FCC-ee interaction regions, which shall ensure optimum conditions for the particle physics experiments. We discuss measures of background reduction and a revised interaction region layout including a low impedance compact beam chamber design. We also discuss the possible impact of the radiation generated in the interaction region including beamstrahlung.

physics.acc-ph↗

arXiv2020

FCC-hh Experimental Insertion Region Design

The Future Circular Collider study is exploring possible designs of circular colliders for the post-LHC era, as recommended by the European Strategy Group for High Energy Physics. One such option is FCC-hh, a proton-proton collider with a centre-of-mass energy of 100 TeV. The experimental insertion regions are key areas defining the performance of the collider. This paper presents the first insertion region designs with a complete assessment of the main challenges, as collision debris with two orders of magnitude larger power than current colliders, beam-beam interactions in long insertions, dynamic aperture for optics with peak $β$ functions one order of magnitude above current colliders, photon background from synchrotron radiation and cross talk between the insertion regions. An alternative design avoiding the use of crab cavities with a small impact on performance is also presented.

physics.acc-ph↗

arXiv2020

Modern and Future Colliders

Since the initial development of charged particle colliders in the middle of the 20th century, these advanced scientific instruments have been at the forefront of scientific discoveries in high energy physics. Collider accelerator technology and beam physics have progressed immensely and modern facilities now operate at energies and luminosities many orders of magnitude greater than the pioneering colliders of the early 1960s. In addition, the field of colliders remains extremely dynamic and continues to develop many innovative approaches. Indeed, several novel concepts are currently being considered for designing and constructing even more powerful future colliders. In this paper, we first review the colliding beam method and the history of colliders, and then present the major achievements of operational machines and the key features of near-term collider projects that are currently under development. We conclude with an analysis of numerous proposals and studies for far-future colliders. The evaluation of their respective potentials reveals tantalizing prospects for further significant breakthroughs in the collider field.

physics.acc-ph↗

arXiv2019

Beam Blow Up due to Beamstrahlung in Circular $e^+e^-$ Colliders

After the discovery of the Higgs boson at the Large Hadron Collider in 2012, several possible future circular colliders -- Higgs factories are proposed, such as FCC-ee and CEPC. At these highest-energy $e^+e^-$ colliders, beamstrahlung, namely the synchrotron radiation emitted in the field of the opposing beam, can greatly affect the equilibrium bunch length and energy spread. If the dispersion function at the collision point is not zero, beamstrahlung will also increase the transverse emittances. In this letter, we first show that, for circular Higgs factories, a classical description of the beamstrahlung is adequate. We then derive analytical formulae describing the equilibrium beam parameters, taking into account the variation of the electromagnetic field during the collision. We illustrate the importance of beamstrahlung, including the increase of bunch length and the implied tolerance on the spurious dispersion function at the collision point, by considering a few examples.

physics.acc-ph↗

arXiv2019

Polarization and Centre-of-mass Energy Calibration at FCC-ee

The first stage of the FCC (Future Circular Collider) is a high-luminosity electron-positron collider (FCC-ee) with centre-of-mass energy ranging from 88 to 365 GeV, to study with high precision the Z, W, Higgs and top particles, with samples of $5 \times 10^{12}$ Z bosons, $10^8$ W pairs, $10^6$ Higgs bosons and $10^6$ top quark pairs. A cornerstone of the physics program lays in the precise (ppm) measurements of the W and Z masses and widths, as well as forward-backward asymmetries. To this effect the centre-of-mass energy distribution should be determined with the high precision. This document describes the capacity offered by FCC-ee, starting with transverse polarization of the beams around the Z pole and the W pair threshold. A running scheme based on regular measurements of the beam energy by resonant depolarization of pilot bunches, during physics data taking, is proposed. The design for polarization wigglers, polarimeter and depolarizer is outlined. The $e^\pm$ beam energies will be monitored with a relative precision of $10^{-6}$. The centre-of-mass energy is derived subject to further corrections, related to the beam acceleration, synchrotron radiation and beamstrahlung; these effects are identified and evaluated. Dimuon events $e^+e^- \to μ^+ μ^-$, recorded in the detectors, provide with great precision the beam crossing angle, the centre-of-mass energy spread, and the $e^+$ and $e^-$ energy difference. Monitoring methods to minimize absolute error and relative uncertainties are discussed. The impact on the physics measurements is given. A programme of further simulations, design, monitoring and R&D is outlined.

physics.acc-ph↗