arXiv subjects

Franziska Scheibel

Publications and source records attributed to Franziska Scheibel.

14 recordsLinked to original sources

arXiv2026

Inferring Magnetic Material Parameters from Statistical Measures in Strongly Fluctuating Magnetization Dynamics

Magnetic material parameters such as the exchange stiffness and magnetic anisotropy govern the behavior and functionality of magnetic systems, yet their local inference from magnetization data remains challenging, particularly in strongly fluctuating regimes with polycrystalline or multiphase microstructure, where conventional texture-based methods become unreliable. We introduce a magnetization-only framework for inferring material parameters from thermally driven magnetization dynamics. Using micromagnetic simulations, we extract statistical quantities such as temporal mean and latent entropy from the magnetization dynamics, fit models to these descriptors, and invert the models to infer material parameters. We show that this framework enables material-parameter inference as well as grain-boundary detection in a heterogeneous sample. Among the descriptors considered, latent entropy yields more accurate parameter estimates than the temporal mean. Our results establish latent entropy as an efficient descriptor for inferring magnetic material parameters from dynamical magnetization data and point toward its use for experimental parameter extraction at high temperatures and, more broadly, under strongly fluctuating conditions.

cond-mat.mtrl-sci↗

arXiv2024

Design of thermal hysteresis in nonstoichiometric alloys with giant magnetocaloric effect

The non-stoichiometric Fe$_2$P-type (FeMnP$_{0.5}$Si$_{0.5}$)$_{1-x}$(FeV)$_{x}$ alloys ( $x=0, 0.01$, $0.02$, and $0.03$) have been investigated as potential candidates for magnetic refrigeration near room temperature. The magnetic ordering temperature decreases with increasing FeV concentration, $x$, which can be ascribed to decreased ferromagnetic coupling strength between the magnetic atoms. The strong magnetoelastic coupling in these alloys results in large values of the isothermal entropy change ($\Delta S_M$); $15.7$ J/kgK, at $2$ T magnetic field for the $x = 0$ alloy. $\Delta S_M$ decreases with increasing $x$. Results from M{\"o}ssbauer spectroscopy reveal that the average hyperfine field (in the ferromagnetic state) and average center shift (in the paramagnetic state) have the same decreasing trend as $\Delta S_M$. The thermal hysteresis ($\Delta T_{hyst}$) of the magnetic phase transition decreases with increasing $x$, while the mechanical stability of the alloys improves due to the reduced lattice volume change across the magnetoelastic phase transition. The adiabatic temperature change $\Delta T_{ad}$, which highly depends on $\Delta T_{hyst}$, is $1.7$ K at $1.9$ T applied field for the $x = 0.02$ alloy.

cond-mat.mtrl-sci↗

arXiv2024

A matter of performance & criticality: a review of rare-earth-based magnetocaloric intermetallic compounds for hydrogen liquefaction

The low efficiency of conventional liquefaction technologies based on the Joule-Thomson expansion makes liquid hydrogen currently not attractive enough for large-scale energy-related technologies that are important for the transition to a carbon-neutral society. Magnetocaloric hydrogen liquefaction has great potential to achieve higher efficiency and is therefore a crucial enabler for affordable liquid hydrogen. Cost-effective magnetocaloric materials with large magnetic entropy and adiabatic temperature changes in the temperature range of 77 $\sim$ 20 K under commercially practicable magnetic fields are the foundation for the success of magnetocaloric hydrogen liquefaction. Heavy rare-earth-based magnetocaloric intermetallic compounds generally show excellent magnetocaloric performances, but the heavy rare-earth elements (Gd, Tb, Dy, Ho, Er, and Tm) are highly critical in resources. Yttrium and light rare-earth elements (La, Ce, Pr, and Nd) are relatively abundant, but their alloys generally show less excellent magnetocaloric properties. A dilemma appears: higher performance or lower criticality? In this review, we study how cryogenic temperature influences magnetocaloric performance by first reviewing heavy rare-earth-based intermetallic compounds. Next, we look at light rare-earth-based, "mixed" rare-earth-based, and Gd-based intermetallic compounds with the nature of the phase transition order taken into consideration, and summarize ways to resolve the dilemma.

cond-mat.mtrl-sci↗

arXiv2024

The role of Debye temperature in achieving large adiabatic temperature changes at cryogenic temperatures: a case study on $Pr_2In$

The excellent magnetic entropy change ($ΔS_T$) in the temperature range of 20 $\sim$ 77 K due to the first-order phase transition makes $Pr_2In$ an intriguing candidate for magnetocaloric hydrogen liquefaction. As an equally important magnetocaloric parameter, the adiabatic temperature change ($ΔT_{ad}$) of $Pr_2In$ associated with the first-order phase transition has not yet been reported. In this work, the $ΔT_{ad}$ of $Pr_2In$ is obtained from heat capacity measurements: 2 K in fields of 2 T and 4.3 K in fields of 5 T. While demonstrating a $ΔT_{ad}$ that is not as impressive as its remarkable $ΔS_T$, $Pr_2In$ exhibits an unusual low Debye temperature ($T_D$) of around 110 K. Based on these two observations, an approach that combines the mean-field and Debye models is developed to study the correlation between $ΔT_{ad}$ and $T_D$. The role of $T_D$ in achieving large $ΔT_{ad}$ is revealed: materials with higher $T_D$ tend to exhibit larger $ΔT_{ad}$, particularly in the cryogenic temperature range. This discovery explains the absence of an outstanding $ΔT_{ad}$ in $Pr_2In$ and can serve as a tool for designing or searching materials with both a large $ΔS_T$ and a $ΔT_{ad}$.

cond-mat.mtrl-sci↗

arXiv2023

High-throughput design of all-d-metal Heusler alloys for magnetocaloric applications

Due to their versatile composition and customizable properties, A$_2$BC Heusler alloys have found applications in magnetic refrigeration, magnetic shape memory effects, permanent magnets, and spintronic devices. The discovery of all-$d$-metal Heusler alloys with improved mechanical properties compared to those containing main group elements, presents an opportunity to engineer Heuslers alloys for energy-related applications. Using high-throughput density functional theory calculations, we screened magnetic all-$d$-metal Heusler compounds and identified 686 (meta)stable compounds. Our detailed analysis revealed that the inverse Heusler structure is preferred when the electronegativity difference between the A and B/C atoms is small, contrary to conventional Heusler alloys. Additionally, our calculations of Pugh ratios and Cauchy pressures demonstrated that ductile and metallic bonding are widespread in all-$d$-metal Heuslers, supporting their enhanced mechanical behaviour. We identified 49 compounds with a double-well energy surface based on Bain path calculations and magnetic ground states, indicating their potential as candidates for magnetocaloric and shape memory applications. Furthermore, by calculating the free energies, we propose that 11 compounds exhibit structural phase transitions, and propose isostructural substitution to enhance the magnetocaloric effect.

cond-mat.mtrl-sci↗

arXiv2023

Designing magnetocaloric materials for hydrogen liquefaction with light rare-earth Laves phases

Magnetocaloric hydrogen liquefaction could be a "game-changer" for liquid hydrogen industry. Although heavy rare-earth-based magnetocaloric materials show strong magnetocaloric effects in the temperature range required by hydrogen liquefaction (77 ~ 20 K), the high resource criticality of the heavy rare-earth elements is a major obstacle for upscaling this emerging liquefaction technology. In contrast, the higher abundances of the light rare-earth elements make their alloys highly appealing for magnetocaloric hydrogen liquefaction. Via a mean-field approach, it is demonstrated that tuning the Curie temperature ($T_C$) of an idealized light rare-earth-based magnetocaloric material towards lower cryogenic temperatures leads to larger maximum magnetic and adiabatic temperature changes ($ΔS_T$ and $ΔT_{ad}$). Especially in the vicinity of the condensation point of hydrogen (20 K), $ΔS_T$ and $ΔT_{ad}$ of the optimized light rare-earth-based material are predicted to show significantly large values. Following the mean-field approach and taking the chemical and physical similarities of the light rare-earth elements into consideration, a method of designing light rare-earth intermetallic compounds for hydrogen liquefaction is proposed: tunning $T_C$ of a rare-earth alloy to approach 20 K by mixing light rare-earth elements with different de Gennes factors. By mixing Nd and Pr in Laves phase $(Nd,Pr)Al_2$, and Pr and Ce in Laves phase $(Pr,Ce)Al_2$, a fully light rare-earth intermetallic series with large magnetocaloric effects covering the temperature range required by hydrogen liquefaction is developed, demonstrating a competitive maximum effect compared to the heavy rare-earth compound $DyAl_2$.

cond-mat.mtrl-sci↗

arXiv2023

Additive manufacturing of Ni-Mn-Sn shape memory Heusler alloy -- Microstructure and magnetic properties from powder to printed parts

Ni-Mn-based Heusler alloys like Ni-Mn-Sn show an elastocaloric as well as magnetocaloric effect during the magneto-structural phase transition, making this material interesting for solid-state cooling application. Material processing by additive manufacturing can overcome difficulties related to machinability of the alloys, caused by their intrinsic brittleness. Since the magnetic properties and transition temperature are highly sensitive to the chemical composition, it is essential to understand and monitoring these properties over the entire processing chain. In the present work the microstructural and magnetic properties from gas-atomized powder to post-processed Ni-Mn-Sn alloy are investigated. Direct energy deposition was used for processing, promoting the evolution of a polycrystalline microstructure being characterized by elongated grains along the building direction. A complete and sharp martensitic transformation can be achieved after applying a subsequent heat treatment at 1173 K for 24 h. The Mn-evaporation of 1.3 at. % and the formation of Mn-oxide during DED-processing lead to an increase of the transition temperature of 45 K and a decrease of magnetization, clearly pointing at the necessity of controlling the composition, oxygen partial pressure and magnetic properties over the entire processing chain.

cond-mat.mtrl-sci↗

arXiv2023

Formation of Core-Shell Precipitates in off-stochiometric Ni-Mn-Sn Heusler alloys probed through the induced Sn-moment

The Shell-ferromagnetic effect originates from the segregation process in off-stochiometric Ni-Mn-based Heusler. In this work, we investigate the precipitation process of L2$_1$-ordered Ni$_2$MnSn and L1$_0$-ordered NiMn in off-stochiometric Ni$_{50}$Mn$_{45}$Sn$_{5}$ during temper annealing, by X-ray diffraction (XRD) and $^{119}$Sn Mössbauer spectroscopy. While XRD probes long-range ordering of the lattice structure, Mössbauer spectroscopy probes nearest-neighbour interactions, reflected in the induced Sn magnetic moment. As shown in this work, the induced magnetic Sn moment can be used as a detector for microscopic structural changes and is, therefore, a powerful tool for investigating the formation of nano-precipitates. Similar research can be performed in the future, for example, on different pinning type magnets like Sm-Co or Nd-Fe-B.

cond-mat.mtrl-sci↗

arXiv2023

Influence of Gd-rich precipitates on the martensitic transformation, magnetocaloric effect and mechanical properties of Ni-Mn-In Heusler alloys -- A comparative study

A multi-stimuli cooling cycle can be used to increase the cyclic caloric performance of multicaloric materials like Ni-Mn-In Heusler alloys. However, the use of a uniaxial compressive stress as an additional external stimulus to a magnetic field requires good mechanical stability. Improvement of mechanical stability and strength by doping has been shown in several studies. However, doping is always accompanied by grain refinement and a change in transition temperature. This raises the question of the extent to which mechanical strength is related to grain refinement, transition temperature, or precipitates. This study shows a direct comparison between a single-phase Ni-Mn-Sn and a two-phase Gd-doped Ni-Mn-In alloy with the same transition temperature and grain size. It is shown that the excellent magnetocaloric properties of the Ni-Mn-In matrix are maintained with doping. The isothermal entropy change and adiabatic temperature change are reduced by only 15% in the two-phase Ni-Mn-In-Heusler alloy compared to the single-phase alloy, which is resulting from a slight increase in thermal hysteresis and the width of the transition. Due to the same grain size and transition temperature, this effect can be directly related to the precipitates. The introduction of Gd precipitates leads to a 100% improvement in mechanical strength, which is significantly lower than the improvement observed for Ni-Mn-In alloys with grain refinement and Gd precipitates. This reveals that a significant contribution to the improved mechanical stability in Gd-doped Heusler alloys is related to grain refinement.

cond-mat.mtrl-sci↗

arXiv2022

A study on rare-earth Laves phases for magnetocaloric liquefaction of hydrogen

We are witnessing a great transition towards a society powered by renewable energies to meet the ever-stringent climate target. Hydrogen, as an energy carrier, will play a key role in building a climate-neutral society. Although liquid hydrogen is essential for hydrogen storage and transportation, liquefying hydrogen is costly with the conventional methods based on Joule-Thomas effect. As an emerging technology which is potentially more efficient, magnetocaloric hydrogen liquefaction is a "game-changer". In this work, we have investigated the rare-earth-based Laves phases ${\rm R}Al_2$ and ${\rm R}Ni_2$ for magnetocaloric hydrogen liquefaction. We have noticed an unaddressed feature that the magnetocaloric effect of second-order magnetocaloric materials can become "giant" near the hydrogen boiling point. This feature indicates strong correlations, down to the boiling point of hydrogen, among the three important quantities of the magnetocaloric effect: the maximum magnetic entropy change $ΔS_{m}^{max}$, the maximum adiabatic temperature change $ΔT_{ad}^{max}$, and the Curie temperature $T_C$. Via a comprehensive literature review, we interpret the correlations for a rare-earth intermetallic series as two trends: (1) $ΔS_{m}^{max}$ increases with decreasing $T_C$; (2) $ΔT_{ad}^{max}$ decreases near room temperature with decreasing $T_C$ but increases at cryogenic temperatures. Moreover, we have developed a mean-field approach to describe these two trends theoretically. The dependence of $ΔS_{m}^{max}$ and $ΔT_{ad}^{max}$ on $T_C$ revealed in this work helps us quickly anticipate the magnetocaloric performance of rare-earth-based compounds, guiding material design and accelerating the discoveries of magnetocaloric materials for hydrogen liquefaction.

cond-mat.mtrl-sci↗

arXiv2021

Influence of microstructure on the application of Ni-Mn-In Heusler compounds for multicaloric cooling using magnetic field and uniaxial stress

Novel multicaloric cooling utilizing the giant caloric response of Ni-Mn-based metamagnetic shape-memory alloys to different external stimuli such as magnetic field, uniaxial stress and hydrostatic pressure is a promising candidate for energy-efficient and environmentally-friendly refrigeration. However, the role of microstructure when several external fields are applied simultaneously or sequentially has been scarcely discussed in literature. Here, we synthesized ternary Ni-Mn-In alloys by suction casting and arc melting and analyzed the microstructural influence on the response to magnetic fields and uniaxial stress. By combining SEM-EBSD and stress-strain data, a significant effect of texture on the stress-induced martensitic transformation is revealed. It is shown that a <001> texture can strongly reduce the critical transformation stresses. The effect of grain size on the material failure is demonstrated and its influence on the magnetic-field-induced transformation dynamics is investigated. Temperature-stress and temperature-magnetic field phase diagrams are established and single caloric performances are characterized in terms of $Δ{s_T}$ and $Δ{T_{ad}}$. The cyclic $Δ{T_{ad}}$ values are compared to the ones achieved in the multicaloric exploiting-hysteresis cycle. It turns out that a suction-cast microstructure and the combination of both stimuli enables outstanding caloric effects in moderate external fields which can significantly exceed the single caloric performances. In particular for Ni-Mn-In, the maximum cyclic effect in magnetic fields of 1.9 T is increased by more than 200 % to -4.1 K when a moderate sequential stress of 55 MPa is applied. Our results illustrate the crucial role of microstructure for multicaloric cooling using Ni-Mn-based metamagnetic shape-memory alloys.

cond-mat.mtrl-sci↗

arXiv2021

Microstructure engineering of metamagnetic Ni-Mn-based Heusler compounds by Fe-doping: A roadmap towards excellent cyclic stability combined with large elastocaloric and magnetocaloric effects

Ni-Mn-based metamagnetic shape-memory alloys exhibit a giant thermal response to magnetic fields and uniaxial stress which can be utilized in single caloric or multicaloric cooling concepts for energy-efficient and sustainable refrigeration. However, during cyclic operation these alloys suffer from structural and functional fatigue as a result of their high intrinsic brittleness. Here, we present based on Fe-doping of Ni-Mn-In a microstructure design strategy which simultaneously improves cyclic stability and maintains the excellent magnetocaloric and elastocaloric properties. Our results reveal that precipitation of a strongly Fe-enriched and In-depleted coherent secondary gamma-phase at grain boundaries can ensure excellent mechanical stability by hindering intergranular fracture during cyclic loading. In this way, a large elastocaloric effect of -4.5 K was achieved for more than 16000 cycles without structural or functional degradation, which corresponds to an increase of the cyclic stability by more than three orders of magnitude as compared to single-phase Ni-Mn-In-(Fe). In addition, we demonstrate that the large magnetocaloric effect of single-phase Ni-Mn-In-(Fe) can be preserved in the dual-phase material when the secondary gamma-phase is exclusively formed at grain boundaries as the martensitic transformation within the Heusler matrix is barely affected. This way, an adiabatic temperature change of -3 K and an isothermal entropy change of 15 $Jkg^{-1}K^{-1}$ was obtained in 2 T for dual-phase Ni-Mn-In-Fe. We expect that this concept can be applied to other single caloric and mutlicaloric materials, therewith paving the way for solid-state caloric cooling applications.

cond-mat.mtrl-sci↗

arXiv2020

Tailoring magnetocaloric effect in all-d-metal Ni-Co-Mn-Ti Heusler alloys: a combined experimental and theoretical study

Novel Ni-Co-Mn-Ti all-d-metal Heusler alloys are exciting due to large multicaloric effects combined with enhanced mechanical properties. An optimized heat treatment for a series of these compounds leads to very sharp phase transitions in bulk alloys with isothermal entropy changes of up to 38 J kg$^{-1}$ K$^{-1}$ for a magnetic field change of 2 T. The differences of as-cast and annealed samples are analyzed by investigating microstructure and phase transitions in detail by optical microscopy. We identify different grain structures as well as stoichiometric (in)homogenieties as reasons for differently sharp martensitic transitions after ideal and non-ideal annealing. We develop alloy design rules for tuning the magnetostructural phase transition and evaluate specifically the sensitivity of the transition temperature towards the externally applied magnetic fields ($\frac{dT_t}{μ_0dH}$) by analyzing the different stoichiometries. We then set up a phase diagram including martensitic transition temperatures and austenite Curie temperatures depending on the e/a ratio for varying Co and Ti content. The evolution of the Curie temperature with changing stoichiometry is compared to other Heusler systems. Density Functional Theory calculations reveal a correlation of T$_C$ with the stoichiometry as well as with the order state of the austenite. This combined approach of experiment and theory allows for an efficient development of new systems towards promising magnetocaloric properties. Direct adiabatic temperature change measurements show here the largest change of -4 K in a magnetic field change of 1.93 T for Ni$_{35}$Co$_{15}$Mn$_{37}$Ti$_{13}$.

cond-mat.mtrl-sci↗

arXiv2016

Impact of lattice dynamics on the phase stability of metamagnetic FeRh: Bulk and thin films

We present phonon dispersions, element-resolved vibrational density of states (VDOS) and corresponding thermodynamic properties obtained by a combination of density functional theory (DFT) and nuclear resonant inelastic X-ray scattering (NRIXS) across the metamagnetic transition of B2 FeRh in the bulk material and thin epitaxial films. We see distinct differences in the VDOS of the antiferromagnetic (AF) and ferromagnetic (FM) phase which provide a microscopic proof of strong spin-phonon coupling in FeRh. The FM VDOS exhibits a particular sensitivity to the slight tetragonal distortions present in epitaxial films, which is not encountered in the AF phase. This results in a notable change in lattice entropy, which is important for the comparison between thin film and bulk results. Our calculations confirm the recently reported lattice instability in the AF phase. The imaginary frequencies at the $X$-point depend critically on the Fe magnetic moment and atomic volume. Analyzing these non vibrational modes leads to the discovery of a stable monoclinic ground state structure which is robustly predicted from DFT but not verified in our thin film experiments. Specific heat, entropy and free energy calculated within the quasiharmonic approximation suggest that the new phase is possibly suppressed because of its relatively smaller lattice entropy. In the bulk phase, lattice degrees of freedom contribute with the same sign and in similar magnitude to the isostructural AF-FM phase transition as the electronic and magnetic subsystems and therefore needs to be included in thermodynamic modeling.

cond-mat.mtrl-sci↗