arXiv subjects

Frederic T. Chong

Publications and source records attributed to Frederic T. Chong.

At least 55 records · Page 3Linked to original sources

arXiv2024

Codesign of quantum error-correcting codes and modular chiplets in the presence of defects

Fabrication errors pose a significant challenge in scaling up solid-state quantum devices to the sizes required for fault-tolerant (FT) quantum applications. To mitigate the resource overhead caused by fabrication errors, we combine two approaches: (1) leveraging the flexibility of a modular architecture, (2) adapting the procedure of quantum error correction (QEC) to account for fabrication defects. We simulate the surface code adapted to qubit arrays with arbitrarily distributed defects to find metrics that characterize how defects affect fidelity. We then determine the impact of defects on the resource overhead of realizing a fault-tolerant quantum computer, on a chiplet-based modular architecture. Our strategy for dealing with fabrication defects demonstrates an exponential suppression of logical failure where error rates of non-faulty physical qubits are ~0.1% in a circuit-based noise model. This is a typical regime where we imagine running the defect-free surface code. We use our numerical results to establish post-selection criteria for building a device from defective chiplets. Using our criteria, we then evaluate the resource overhead in terms of the average number of fabricated physical qubits per logical qubit. We find that an optimal choice of chiplet size, based on the defect rate and target fidelity, is essential to limiting any additional error correction overhead due to defects. When the optimal chiplet size is chosen, at a defect rate of 1% the resource overhead can be reduced to below 3X and 6X respectively for the two defect models we use, for a wide range of target performance. We also determine cutoff fidelity values that help identify whether a qubit should be disabled or kept as part of the error correction code.

quant-ph↗

arXiv2024

VarSaw: Application-tailored Measurement Error Mitigation for Variational Quantum Algorithms

For potential quantum advantage, Variational Quantum Algorithms (VQAs) need high accuracy beyond the capability of today's NISQ devices, and thus will benefit from error mitigation. In this work we are interested in mitigating measurement errors which occur during qubit measurements after circuit execution and tend to be the most error-prone operations, especially detrimental to VQAs. Prior work, JigSaw, has shown that measuring only small subsets of circuit qubits at a time and collecting results across all such subset circuits can reduce measurement errors. Then, running the entire (global) original circuit and extracting the qubit-qubit measurement correlations can be used in conjunction with the subsets to construct a high-fidelity output distribution of the original circuit. Unfortunately, the execution cost of JigSaw scales polynomially in the number of qubits in the circuit, and when compounded by the number of circuits and iterations in VQAs, the resulting execution cost quickly turns insurmountable. To combat this, we propose VarSaw, which improves JigSaw in an application-tailored manner, by identifying considerable redundancy in the JigSaw approach for VQAs: spatial redundancy across subsets from different VQA circuits and temporal redundancy across globals from different VQA iterations. VarSaw then eliminates these forms of redundancy by commuting the subset circuits and selectively executing the global circuits, reducing computational cost (in terms of the number of circuits executed) over naive JigSaw for VQA by 25x on average and up to 1000x, for the same VQA accuracy. Further, it can recover, on average, 45% of the infidelity from measurement errors in the noisy VQA baseline. Finally, it improves fidelity by 55%, on average, over JigSaw for a fixed computational budget. VarSaw can be accessed here: https://github.com/siddharthdangwal/VarSaw.

quant-ph↗

arXiv2024

Time-Efficient Qudit Gates through Incremental Pulse Re-seeding

Current efforts to build quantum computers focus mainly on the two-state qubit, which often involves suppressing readily-available higher states. In this work, we break this abstraction and synthesize short-duration control pulses for gates on generalized d-state qudits. We present Incremental Pulse Re-seeding, a practical scheme to guide optimal control software to the lowest-duration pulse by iteratively seeding the optimizer with previous results. We find a near-linear relationship between Hilbert space dimension and gate duration through explicit pulse optimization for one- and two-qudit gates on transmons. Our results suggest that qudit operations are much more efficient than previously expected in the practical regime of interest and have the potential to significantly increase the computational power of current hardware.

quant-ph↗

arXiv2024

Dancing the Quantum Waltz: Compiling Three-Qubit Gates on Four Level Architectures

Superconducting quantum devices are a leading technology for quantum computation, but they suffer from several challenges. Gate errors, coherence errors and a lack of connectivity all contribute to low fidelity results. In particular, connectivity restrictions enforce a gate set that requires three-qubit gates to be decomposed into one- or two-qubit gates. This substantially increases the number of two-qubit gates that need to be executed. However, many quantum devices have access to higher energy levels. We can expand the qubit abstraction of $|0\rangle$ and $|1\rangle$ to a ququart which has access to the $|2\rangle$ and $|3\rangle$ state, but with shorter coherence times. This allows for two qubits to be encoded in one ququart, enabling increased virtual connectivity between physical units from two adjacent qubits to four fully connected qubits. This connectivity scheme allows us to more efficiently execute three-qubit gates natively between two physical devices. We present direct-to-pulse implementations of several three-qubit gates, synthesized via optimal control, for compilation of three-qubit gates onto a superconducting-based architecture with access to four-level devices with the first experimental demonstration of four-level ququart gates designed through optimal control. We demonstrate strategies that temporarily use higher level states to perform Toffoli gates and always use higher level states to improve fidelities for quantum circuits. We find that these methods improve expected fidelities with increases of 2x across circuit sizes using intermediate encoding, and increases of 3x for fully-encoded ququart compilation.

quant-ph↗

arXiv2024

Spacetime-Efficient Low-Depth Quantum State Preparation with Applications

We propose a novel deterministic method for preparing arbitrary quantum states. When our protocol is compiled into CNOT and arbitrary single-qubit gates, it prepares an $N$-dimensional state in depth $O(\log(N))$ and spacetime allocation (a metric that accounts for the fact that oftentimes some ancilla qubits need not be active for the entire circuit) $O(N)$, which are both optimal. When compiled into the $\{\mathrm{H,S,T,CNOT}\}$ gate set, we show that it requires asymptotically fewer quantum resources than previous methods. Specifically, it prepares an arbitrary state up to error $ε$ with optimal depth of $O(\log(N) + \log (1/ε))$ and spacetime allocation $O(N\log(\log(N)/ε))$, improving over $O(\log(N)\log(\log (N)/ε))$ and $O(N\log(N/ε))$, respectively. We illustrate how the reduced spacetime allocation of our protocol enables rapid preparation of many disjoint states with only constant-factor ancilla overhead -- $O(N)$ ancilla qubits are reused efficiently to prepare a product state of $w$ $N$-dimensional states in depth $O(w + \log(N))$ rather than $O(w\log(N))$, achieving effectively constant depth per state. We highlight several applications where this ability would be useful, including quantum machine learning, Hamiltonian simulation, and solving linear systems of equations. We provide quantum circuit descriptions of our protocol, detailed pseudocode, and gate-level implementation examples using Braket.

quant-ph↗

arXiv2024

QuantumSEA: In-Time Sparse Exploration for Noise Adaptive Quantum Circuits

Parameterized Quantum Circuits (PQC) have obtained increasing popularity thanks to their great potential for near-term Noisy Intermediate-Scale Quantum (NISQ) computers. Achieving quantum advantages usually requires a large number of qubits and quantum circuits with enough capacity. However, limited coherence time and massive quantum noises severely constrain the size of quantum circuits that can be executed reliably on real machines. To address these two pain points, we propose QuantumSEA, an in-time sparse exploration for noise-adaptive quantum circuits, aiming to achieve two key objectives: (1) implicit circuits capacity during training - by dynamically exploring the circuit's sparse connectivity and sticking a fixed small number of quantum gates throughout the training which satisfies the coherence time and enjoy light noises, enabling feasible executions on real quantum devices; (2) noise robustness - by jointly optimizing the topology and parameters of quantum circuits under real device noise models. In each update step of sparsity, we leverage the moving average of historical gradients to grow necessary gates and utilize salience-based pruning to eliminate insignificant gates. Extensive experiments are conducted with 7 Quantum Machine Learning (QML) and Variational Quantum Eigensolver (VQE) benchmarks on 6 simulated or real quantum computers, where QuantumSEA consistently surpasses noise-aware search, human-designed, and randomly generated quantum circuit baselines by a clear performance margin. For example, even in the most challenging on-chip training regime, our method establishes state-of-the-art results with only half the number of quantum gates and ~2x time saving of circuit executions. Codes are available at https://github.com/VITA-Group/QuantumSEA.

quant-ph↗

arXiv2023

RobustState: Boosting Fidelity of Quantum State Preparation via Noise-Aware Variational Training

Quantum state preparation, a crucial subroutine in quantum computing, involves generating a target quantum state from initialized qubits. Arbitrary state preparation algorithms can be broadly categorized into arithmetic decomposition (AD) and variational quantum state preparation (VQSP). AD employs a predefined procedure to decompose the target state into a series of gates, whereas VQSP iteratively tunes ansatz parameters to approximate target state. VQSP is particularly apt for Noisy-Intermediate Scale Quantum (NISQ) machines due to its shorter circuits. However, achieving noise-robust parameter optimization still remains challenging. We present RobustState, a novel VQSP training methodology that combines high robustness with high training efficiency. The core idea involves utilizing measurement outcomes from real machines to perform back-propagation through classical simulators, thus incorporating real quantum noise into gradient calculations. RobustState serves as a versatile, plug-and-play technique applicable for training parameters from scratch or fine-tuning existing parameters to enhance fidelity on target machines. It is adaptable to various ansatzes at both gate and pulse levels and can even benefit other variational algorithms, such as variational unitary synthesis. Comprehensive evaluation of RobustState on state preparation tasks for 4 distinct quantum algorithms using 10 real quantum machines demonstrates a coherent error reduction of up to 7.1 $\times$ and state fidelity improvement of up to 96\% and 81\% for 4-Q and 5-Q states, respectively. On average, RobustState improves fidelity by 50\% and 72\% for 4-Q and 5-Q states compared to baseline approaches.

quant-ph↗

arXiv2023

CAFQA: A classical simulation bootstrap for variational quantum algorithms

This work tackles the problem of finding a good ansatz initialization for Variational Quantum Algorithms (VQAs), by proposing CAFQA, a Clifford Ansatz For Quantum Accuracy. The CAFQA ansatz is a hardware-efficient circuit built with only Clifford gates. In this ansatz, the parameters for the tunable gates are chosen by searching efficiently through the Clifford parameter space via classical simulation. The resulting initial states always equal or outperform traditional classical initialization (e.g., Hartree-Fock), and enable high-accuracy VQA estimations. CAFQA is well-suited to classical computation because: a) Clifford-only quantum circuits can be exactly simulated classically in polynomial time, and b) the discrete Clifford space is searched efficiently via Bayesian Optimization. For the Variational Quantum Eigensolver (VQE) task of molecular ground state energy estimation (up to 18 qubits), CAFQA's Clifford Ansatz achieves a mean accuracy of nearly 99% and recovers as much as 99.99% of the molecular correlation energy that is lost in Hartree-Fock initialization. CAFQA achieves mean accuracy improvements of 6.4x and 56.8x, over the state-of-the-art, on different metrics. The scalability of the approach allows for preliminary ground state energy estimation of the challenging chromium dimer (Cr$_2$) molecule. With CAFQA's high-accuracy initialization, the convergence of VQAs is shown to accelerate by 2.5x, even for small molecules. Furthermore, preliminary exploration of allowing a limited number of non-Clifford (T) gates in the CAFQA framework, shows that as much as 99.9% of the correlation energy can be recovered at bond lengths for which Clifford-only CAFQA accuracy is relatively limited, while remaining classically simulable.

quant-ph↗

arXiv2023

Navigating the dynamic noise landscape of variational quantum algorithms with QISMET

Transient errors from the dynamic NISQ noise landscape are challenging to comprehend and are especially detrimental to classes of applications that are iterative and/or long-running, and therefore their timely mitigation is important for quantum advantage in real-world applications. The most popular examples of iterative long-running quantum applications are variational quantum algorithms (VQAs). Iteratively, VQA's classical optimizer evaluates circuit candidates on an objective function and picks the best circuits towards achieving the application's target. Noise fluctuation can cause a significant transient impact on the objective function estimation of the VQA iterations / tuning candidates. This can severely affect VQA tuning and, by extension, its accuracy and convergence. This paper proposes QISMET: Quantum Iteration Skipping to Mitigate Error Transients, to navigate the dynamic noise landscape of VQAs. QISMET actively avoids instances of high fluctuating noise which are predicted to have a significant transient error impact on specific VQA iterations. To achieve this, QISMET estimates transient error in VQA iterations and designs a controller to keep the VQA tuning faithful to the transient-free scenario. By doing so, QISMET efficiently mitigates a large portion of the transient noise impact on VQAs and is able to improve the fidelity by 1.3x-3x over a traditional VQA baseline, with 1.6-2.4x improvement over alternative approaches, across different applications and machines. Further, to diligently analyze the effects of transients, this work also builds transient noise models for target VQA applications from observing real machine transients. These are then integrated with the Qiskit simulator.

quant-ph↗

arXiv2023

An Architecture for Improved Surface Code Connectivity in Neutral Atoms

In order to achieve error rates necessary for advantageous quantum algorithms, Quantum Error Correction (QEC) will need to be employed, improving logical qubit fidelity beyond what can be achieved physically. As today's devices begin to scale, co-designing architectures for QEC with the underlying hardware will be necessary to reduce the daunting overheads and accelerate the realization of practical quantum computing. In this work, we focus on logical computation in QEC. We address quantum computers made from neutral atom arrays to design a surface code architecture that translates the hardware's higher physical connectivity into a higher logical connectivity. We propose groups of interleaved logical qubits, gaining all-to-all connectivity within the group via efficient transversal CNOT gates. Compared to standard lattice surgery operations, this reduces both the overall qubit footprint and execution time, lowering the spacetime overhead needed for small-scale QEC circuits. We also explore the architecture's scalability. We look at using physical atom movement schemes and propose interleaved lattice surgery which allows an all-to-all connectivity between qubits in adjacent interleaved groups, creating a higher connectivity routing space for large-scale circuits. Using numerical simulations, we evaluate the total routing time of interleaved lattice surgery and atom movement for various circuit sizes. We identify a cross-over point defining intermediate-scale circuits where atom movement is best and large-scale circuits where interleaved lattice surgery is best. We use this to motivate a hybrid approach as devices continue to scale, with the choice of operation depending on the routing distance.

quant-ph↗

arXiv2023

SnCQA: A hardware-efficient equivariant quantum convolutional circuit architecture

We propose SnCQA, a set of hardware-efficient variational circuits of equivariant quantum convolutional circuits respective to permutation symmetries and spatial lattice symmetries with the number of qubits $n$. By exploiting permutation symmetries of the system, such as lattice Hamiltonians common to many quantum many-body and quantum chemistry problems, Our quantum neural networks are suitable for solving machine learning problems where permutation symmetries are present, which could lead to significant savings of computational costs. Aside from its theoretical novelty, we find our simulations perform well in practical instances of learning ground states in quantum computational chemistry, where we could achieve comparable performances to traditional methods with few tens of parameters. Compared to other traditional variational quantum circuits, such as the pure hardware-efficient ansatz (pHEA), we show that SnCQA is more scalable, accurate, and noise resilient (with $20\times$ better performance on $3 \times 4$ square lattice and $200\% - 1000\%$ resource savings in various lattice sizes and key criterions such as the number of layers, parameters, and times to converge in our cases), suggesting a potentially favorable experiment on near-time quantum devices.

quant-ph↗

arXiv2023

Superstaq: Deep Optimization of Quantum Programs

We describe Superstaq, a quantum software platform that optimizes the execution of quantum programs by tailoring to underlying hardware primitives. For benchmarks such as the Bernstein-Vazirani algorithm and the Qubit Coupled Cluster chemistry method, we find that deep optimization can improve program execution performance by at least 10x compared to prevailing state-of-the-art compilers. To highlight the versatility of our approach, we present results from several hardware platforms: superconducting qubits (AQT @ LBNL, IBM Quantum, Rigetti), trapped ions (QSCOUT), and neutral atoms (Infleqtion). Across all platforms, we demonstrate new levels of performance and new capabilities that are enabled by deeper integration between quantum programs and the device physics of hardware.

quant-ph↗

arXiv2023

Efficient control pulses for continuous quantum gate families through coordinated re-optimization

We present a general method to quickly generate high-fidelity control pulses for any continuously-parameterized set of quantum gates after calibrating a small number of reference pulses. We find that interpolating between optimized control pulses for different quantum operations does not immediately yield a high-fidelity intermediate operation. To solve this problem, we propose a method to optimize control pulses specifically to provide good interpolations. We pick several reference operations in the gate family of interest and optimize pulses that implement these operations, then iteratively re-optimize the pulses to guide their shapes to be similar for operations that are closely related. Once this set of reference pulses is calibrated, we can use a straightforward linear interpolation method to instantly obtain high-fidelity pulses for arbitrary gates in the continuous operation space. We demonstrate this procedure on the three-parameter Cartan decomposition of two-qubit gates to obtain control pulses for any arbitrary two-qubit gate (up to single-qubit operations) with consistently high fidelity. Compared to previous neural network approaches, the method is 7.7x more computationally efficient to calibrate the pulse space for the set of all single-qubit gates. Our technique generalizes to any number of gate parameters and could easily be used with advanced pulse optimization algorithms to allow for better translation from simulation to experiment.

quant-ph↗

arXiv2023

Training Quantum Boltzmann Machines with Coresets

Recent work has proposed and explored using coreset techniques for quantum algorithms that operate on classical data sets to accelerate the applicability of these algorithms on near-term quantum devices. We apply these ideas to Quantum Boltzmann Machines (QBM) where gradient-based steps which require Gibbs state sampling are the main computational bottleneck during training. By using a coreset in place of the full data set, we try to minimize the number of steps needed and accelerate the overall training time. In a regime where computational time on quantum computers is a precious resource, we propose this might lead to substantial practical savings. We evaluate this approach on 6x6 binary images from an augmented bars and stripes data set using a QBM with 36 visible units and 8 hidden units. Using an Inception score inspired metric, we compare QBM training times with and without using coresets.

quant-ph↗

arXiv2023

Fundamental causal bounds of quantum random access memories

Quantum devices should operate in adherence to quantum physics principles. Quantum random access memory (QRAM), a fundamental component of many essential quantum algorithms for tasks such as linear algebra, data search, and machine learning, is often proposed to offer $\mathcal{O}(\log N)$ circuit depth for $\mathcal{O}(N)$ data size, given $N$ qubits. However, this claim appears to breach the principle of relativity when dealing with a large number of qubits in quantum materials interacting locally. In our study we critically explore the intrinsic bounds of rapid quantum memories based on causality, employing the relativistic quantum field theory and Lieb-Robinson bounds in quantum many-body systems. In this paper, we consider a hardware-efficient QRAM design in hybrid quantum acoustic systems. Assuming clock cycle times of approximately $10^{-3}$ seconds and a lattice spacing of about 1 micrometer, we show that QRAM can accommodate up to $\mathcal{O}(10^7)$ logical qubits in 1 dimension, $\mathcal{O}(10^{15})$ to $\mathcal{O}(10^{20})$ in various 2D architectures, and $\mathcal{O}(10^{24})$ in 3 dimensions. We contend that this causality bound broadly applies to other quantum hardware systems. Our findings highlight the impact of fundamental quantum physics constraints on the long-term performance of quantum computing applications in data science and suggest potential quantum memory designs for performance enhancement.

quant-ph↗

arXiv2023

Automatic pulse-level calibration by tracking observables using iterative learning

Model-based quantum optimal control promises to solve a wide range of critical quantum technology problems within a single, flexible framework. The catch is that highly-accurate models are needed if the optimized controls are to meet the exacting demands set by quantum engineers. A practical alternative is to directly calibrate control parameters by taking device data and tuning until success is achieved. In quantum computing, gate errors due to inaccurate models can be efficiently polished if the control is limited to a few (usually hand-designed) parameters; however, an alternative tool set is required to enable efficient calibration of the complicated waveforms potentially returned by optimal control. We propose an automated model-based framework for calibrating quantum optimal controls called Learning Iteratively for Feasible Tracking (LIFT). LIFT achieves high-fidelity controls despite parasitic model discrepancies by precisely tracking feasible trajectories of quantum observables. Feasible trajectories are set by combining black-box optimal control and the bilinear dynamic mode decomposition, a physics-informed regression framework for discovering effective Hamiltonian models directly from rollout data. Any remaining tracking errors are eliminated in a non-causal way by applying model-based, norm-optimal iterative learning control to subsequent rollout data. We use numerical experiments of qubit gate synthesis to demonstrate how LIFT enables calibration of high-fidelity optimal control waveforms in spite of model discrepancies.

quant-ph↗

arXiv2023

Exploring Ququart Computation on a Transmon using Optimal Control

Contemporary quantum computers encode and process quantum information in binary qubits (d = 2). However, many architectures include higher energy levels that are left as unused computational resources. We demonstrate a superconducting ququart (d = 4) processor and combine quantum optimal control with efficient gate decompositions to implement high-fidelity ququart gates. We distinguish between viewing the ququart as a generalized four-level qubit and an encoded pair of qubits, and characterize the resulting gates in each case. In randomized benchmarking experiments we observe gate fidelities greater 95% and identify coherence as the primary limiting factor. Our results validate ququarts as a viable tool for quantum information processing.

quant-ph↗

arXiv2023

Fault Tolerant Non-Clifford State Preparation for Arbitrary Rotations

Quantum error correction is an essential component for practical quantum computing on noisy quantum hardware. However, logical operations on error-corrected qubits require a significant resource overhead, especially for high-precision and high-fidelity non-Clifford rotation gates. To address this issue, we propose a postselection-based algorithm to efficiently prepare resource states for gate teleportation. Our algorithm achieves fault tolerance, demonstrating the exponential suppression of logical errors with code distance, and it applies to any stabilizer codes. We provide analytical derivations and numerical simulations of the fidelity and success probability of the algorithm. We benchmark the method on surface code and show a factor of 100 to 10,000 reduction in space-time overhead compared to existing methods. Overall, our approach presents a promising path to reducing the resource requirement for quantum algorithms on error-corrected and noisy intermediate-scale quantum computers.

quant-ph↗