arXiv subjects

Frederick R. Hearty

Publications and source records attributed to Frederick R. Hearty.

11 recordsLinked to original sources

arXiv2022

The iLocater cryostat and thermal control system: enabling extremely precise radial velocity measurements for diffraction-limited spectrographs

Extremely precise radial velocity (EPRV) measurements are critical for characterizing nearby terrestrial worlds. EPRV instrument precisions of $σ_{\mathrm{RV}} = 1-10\,\mathrm{cm/s}$ are required to study Earth-analog systems, imposing stringent, sub-mK, thermo-mechanical stability requirements on Doppler spectrograph designs. iLocater is a new, high-resolution ($R=190,500$ median) near infrared (NIR) EPRV spectrograph under construction for the dual 8.4 m diameter Large Binocular Telescope (LBT). The instrument is one of the first to operate in the diffraction-limited regime enabled by the use of adaptive optics and single-mode fibers. This facilitates affordable optomechanical fabrication of the spectrograph using intrinsically stable materials. We present the final design and performance of the iLocater cryostat and thermal control system which houses the instrument spectrograph. The spectrograph is situated inside an actively temperature-controlled radiation shield mounted inside a multi-layer-insulation (MLI) lined vacuum chamber. The radiation shield provides sub-mK thermal stability, building on the existing heritage of the Habitable-zone Planet Finder (HPF) and NEID instruments. The instrument operating temperature ($T=80-100\,\mathrm{K}$) is driven by the requirement to minimize detector background and instantaneous coefficient of thermal expansion (CTE) of the materials used for spectrograph fabrication. This combination allows for a reduced thermomechanical impact on measurement precision, improving the scientific capabilities of the instrument.

astro-ph.IM↗

arXiv2020

Ghosts of NEID's Past

The NEID spectrograph is a R $\sim$ 120,000 resolution fiber-fed and highly stabilized spectrograph for extreme radial velocity (RV) precision. It is being commissioned at the 3.5 m WIYN telescope in Kitt Peak National Observatory with a desired instrumental precision of better than 30 \cms{}. NEID's bandpass of 380 -- 930 nm enables the simultaneous wavelength coverage of activity indicators from the Ca HK lines in the blue to the Ca IR triplet in the IR. In this paper we will present our efforts to characterize and mitigate optical ghosts in the NEID spectrograph during assembly, integration and testing, and highlight several of the dominant optical element contributors such as the cross dispersion prism and input optics. We shall present simulations of the 2-D spectrum and discuss the predicted ghost features on the focal plane, and how they may impact the RV performance for NEID. We also present the mitigation strategy adopted for each ghost which may be applied to future instrument designs. This work will enable other instrument builders to potentially avoid some of these issues, as well as outline mitigation strategies.

astro-ph.IM↗

arXiv2019

Ultra-Stable Environment Control for the NEID Spectrometer: Design and Performance Demonstration

Two key areas of emphasis in contemporary experimental exoplanet science are the detailed characterization of transiting terrestrial planets, and the search for Earth analog planets to be targeted by future imaging missions. Both of these pursuits are dependent on an order-of-magnitude improvement in the measurement of stellar radial velocities (RV), setting a requirement on single-measurement instrumental uncertainty of order 10 cm/s. Achieving such extraordinary precision on a high-resolution spectrometer requires thermo-mechanically stabilizing the instrument to unprecedented levels. Here, we describe the Environment Control System (ECS) of the NEID Spectrometer, which will be commissioned on the 3.5 m WIYN Telescope at Kitt Peak National Observatory in 2019, and has a performance specification of on-sky RV precision < 50 cm/s. Because NEID's optical table and mounts are made from aluminum, which has a high coefficient of thermal expansion, sub-milliKelvin temperature control is especially critical. NEID inherits its ECS from that of the Habitable-zone Planet Finder (HPF), but with modifications for improved performance and operation near room temperature. Our full-system stability test shows the NEID system exceeds the already impressive performance of HPF, maintaining vacuum pressures below $10^{-6}$ Torr and an RMS temperature stability better than 0.4 mK over 30 days. Our ECS design is fully open-source; the design of our temperature-controlled vacuum chamber has already been made public, and here we release the electrical schematics for our custom Temperature Monitoring and Control (TMC) system.

astro-ph.IM↗

arXiv2018

Overview of the spectrometer optical fiber feed for the Habitable-zone Planet Finder

The Habitable-zone Planet Finder (HPF) is a highly stabilized fiber fed precision radial velocity (RV) spectrograph working in the Near Infrared (NIR): 810 - 1280 nm . In this paper we present an overview of the preparation of the optical fibers for HPF. The entire fiber train from the telescope focus down to the cryostat is detailed. We also discuss the fiber polishing, splicing and its integration into the instrument using a fused silica puck. HPF was designed to be able to operate in two modes, High Resolution (HR- the only mode mode currently commissioned) and High Efficiency (HE). We discuss these fiber heads and the procedure we adopted to attach the slit on to the HR fibers.

astro-ph.IM↗

arXiv2016

The iLocater cryostat: design and thermal control strategy for precision radial velocity measurements

The current generation of precision radial velocity (RV) spectrographs are seeing-limited instruments. In order to achieve high spectral resolution on 8m class telescopes, these spectrographs require large optics and in turn, large instrument volumes. Achieving milli-Kelvin thermal stability for these systems is challenging but is vital in order to obtain a single measurement RV precision of better than 1m/s. This precision is crucial to study Earth-like exoplanets within the habitable zone. iLocater is a next generation RV instrument being developed for the Large Binocular Telescope. Unlike seeing-limited RV instruments, iLocater uses adaptive optics (AO) to inject a diffraction-limited beam into single-mode fibers. These fibers illuminate the instrument spectrograph, facilitating a diffraction-limited design and a small instrument volume compared to present-day instruments. This enables intrinsic instrument stability and facilitates precision thermal control. We present the current design of the iLocater cryostat which houses the instrument spectrograph and the strategy for its thermal control. The spectrograph is situated within a pair of radiation shields mounted inside an MLI lined vacuum chamber. The outer radiation shield is actively controlled to maintain instrument stability at the sub-mK level and minimize effects of thermal changes from the external environment. An inner shield passively dampens any residual temperature fluctuations and is radiatively coupled to the optical board. To provide intrinsic stability, the optical board and optic mounts will be made from Invar and cooled to 58K to benefit from a zero coefficient of thermal expansion (CTE) value at this temperature. Combined, the small footprint of the instrument spectrograph, the use of Invar, and precision thermal control will allow long-term sub-milliKelvin stability to facilitate precision RV measurements.

astro-ph.IM↗

arXiv2014

The Tenth Data Release of the Sloan Digital Sky Survey: First Spectroscopic Data from the SDSS-III Apache Point Observatory Galactic Evolution Experiment

The Sloan Digital Sky Survey (SDSS) has been in operation since 2000 April. This paper presents the tenth public data release (DR10) from its current incarnation, SDSS-III. This data release includes the first spectroscopic data from the Apache Point Observatory Galaxy Evolution Experiment (APOGEE), along with spectroscopic data from the Baryon Oscillation Spectroscopic Survey (BOSS) taken through 2012 July. The APOGEE instrument is a near-infrared R~22,500 300-fiber spectrograph covering 1.514--1.696 microns. The APOGEE survey is studying the chemical abundances and radial velocities of roughly 100,000 red giant star candidates in the bulge, bar, disk, and halo of the Milky Way. DR10 includes 178,397 spectra of 57,454 stars, each typically observed three or more times, from APOGEE. Derived quantities from these spectra (radial velocities, effective temperatures, surface gravities, and metallicities) are also included.DR10 also roughly doubles the number of BOSS spectra over those included in the ninth data release. DR10 includes a total of 1,507,954 BOSS spectra, comprising 927,844 galaxy spectra; 182,009 quasar spectra; and 159,327 stellar spectra, selected over 6373.2 square degrees.

astro-ph.IM↗

arXiv2014

New Red Jewels in Coma Berenices

We have used Sloan Digital Sky Survey-III (SDSS-III) Apache Point Observatory Galactic Evolution Experiment (APOGEE) radial velocity observations in the near-infrared $H$-band to explore the membership of the nearby ($86.7 \pm 0.9$ pc) open cluster Coma Berenices (Melotte 111), concentrating on the poorly-populated low-mass end of the main sequence. Using SDSS-III APOGEE radial velocity measurements, we confirm the membership of eight K/M dwarf members, providing the first confirmed low-mass members of the Coma Berenices cluster. Using $R\sim2000$ spectra from IRTF-SpeX, we confirm the independently luminosity classes of these targets, and find their metallicities to be consistent with the known solar mean metallicity of Coma Berenices and of M dwarfs in the Solar neighborhood. In addition, the APOGEE spectra have enabled measurement of $v\sin i$ for each target and detection for the first time of the low-mass secondary components of the known binary systems Melotte 111 102 and Melotte 111 120, as well as identification of the previously unknown binary system 2MASS J12214070+2707510. Finally, we use Kilodegree Extremely Little Telescope (KELT) photometry to measure photometric variability and rotation periods for a subset of the Coma Berenices members.

astro-ph.SR↗

arXiv2013

The Open Cluster Chemical Analysis and Mapping Survey: Local Galactic Metallicity Gradient with APOGEE using SDSS DR10

The Open Cluster Chemical Analysis and Mapping (OCCAM) Survey aims to produce a comprehensive, uniform, infrared-based dataset for hundreds of open clusters, and constrain key Galactic dynamical and chemical parameters from this sample. This first contribution from the OCCAM survey presents analysis of 141 members stars in 28 open clusters with high-resolution metallicities derived from a large uniform sample collected as part of the SDSS-III/Apache Point Observatory Galactic Evolution Experiment (APOGEE). This sample includes the first high-resolution metallicity measurements for 22 open clusters. With this largest ever uniformly observed sample of open cluster stars we investigate the Galactic disk gradients of both [M/H] and [alpha/M]. We find basically no gradient across this range in [alpha/M], but [M/H] does show a gradient for R_{GC} < 10 kpc and a significant flattening beyond R_{GC} = 10 kpc. In particular, whereas fitting a single linear trend yields an [M/H] gradient of -0.09 +/- 0.03$ dex/kpc --- similar to previously measure gradients inside 13 kpc --- by independently fitting inside and outside 10 kpc separately we find a significantly steeper gradient near the Sun (7.9 <= R_{GC} <= 10) than previously found (-0.20 +/- 0.08 dex/kpc) and a nearly flat trend beyond 10 kpc (-0.02 +/- 0.09 dex/kpc).

astro-ph.GA↗

arXiv2012

The Ninth Data Release of the Sloan Digital Sky Survey: First Spectroscopic Data from the SDSS-III Baryon Oscillation Spectroscopic Survey

The Sloan Digital Sky Survey III (SDSS-III) presents the first spectroscopic data from the Baryon Oscillation Spectroscopic Survey (BOSS). This ninth data release (DR9) of the SDSS project includes 535,995 new galaxy spectra (median z=0.52), 102,100 new quasar spectra (median z=2.32), and 90,897 new stellar spectra, along with the data presented in previous data releases. These spectra were obtained with the new BOSS spectrograph and were taken between 2009 December and 2011 July. In addition, the stellar parameters pipeline, which determines radial velocities, surface temperatures, surface gravities, and metallicities of stars, has been updated and refined with improvements in temperature estimates for stars with T_eff<5000 K and in metallicity estimates for stars with [Fe/H]>-0.5. DR9 includes new stellar parameters for all stars presented in DR8, including stars from SDSS-I and II, as well as those observed as part of the SDSS-III Sloan Extension for Galactic Understanding and Exploration-2 (SEGUE-2). The astrometry error introduced in the DR8 imaging catalogs has been corrected in the DR9 data products. The next data release for SDSS-III will be in Summer 2013, which will present the first data from the Apache Point Observatory Galactic Evolution Experiment (APOGEE) along with another year of data from BOSS, followed by the final SDSS-III data release in December 2014.

astro-ph.IM↗

arXiv2011

SDSS-III: Massive Spectroscopic Surveys of the Distant Universe, the Milky Way Galaxy, and Extra-Solar Planetary Systems

Building on the legacy of the Sloan Digital Sky Survey (SDSS-I and II), SDSS-III is a program of four spectroscopic surveys on three scientific themes: dark energy and cosmological parameters, the history and structure of the Milky Way, and the population of giant planets around other stars. In keeping with SDSS tradition, SDSS-III will provide regular public releases of all its data, beginning with SDSS DR8 (which occurred in Jan 2011). This paper presents an overview of the four SDSS-III surveys. BOSS will measure redshifts of 1.5 million massive galaxies and Lya forest spectra of 150,000 quasars, using the BAO feature of large scale structure to obtain percent-level determinations of the distance scale and Hubble expansion rate at z<0.7 and at z~2.5. SEGUE-2, which is now completed, measured medium-resolution (R=1800) optical spectra of 118,000 stars in a variety of target categories, probing chemical evolution, stellar kinematics and substructure, and the mass profile of the dark matter halo from the solar neighborhood to distances of 100 kpc. APOGEE will obtain high-resolution (R~30,000), high signal-to-noise (S/N>100 per resolution element), H-band (1.51-1.70 micron) spectra of 10^5 evolved, late-type stars, measuring separate abundances for ~15 elements per star and creating the first high-precision spectroscopic survey of all Galactic stellar populations (bulge, bar, disks, halo) with a uniform set of stellar tracers and spectral diagnostics. MARVELS will monitor radial velocities of more than 8000 FGK stars with the sensitivity and cadence (10-40 m/s, ~24 visits per star) needed to detect giant planets with periods up to two years, providing an unprecedented data set for understanding the formation and dynamical evolution of giant planet systems. (Abridged)

astro-ph.IM↗

arXiv2011

The Eighth Data Release of the Sloan Digital Sky Survey: First Data from SDSS-III

The Sloan Digital Sky Survey (SDSS) started a new phase in August 2008, with new instrumentation and new surveys focused on Galactic structure and chemical evolution, measurements of the baryon oscillation feature in the clustering of galaxies and the quasar Ly alpha forest, and a radial velocity search for planets around ~8000 stars. This paper describes the first data release of SDSS-III (and the eighth counting from the beginning of the SDSS). The release includes five-band imaging of roughly 5200 deg^2 in the Southern Galactic Cap, bringing the total footprint of the SDSS imaging to 14,555 deg^2, or over a third of the Celestial Sphere. All the imaging data have been reprocessed with an improved sky-subtraction algorithm and a final, self-consistent photometric recalibration and flat-field determination. This release also includes all data from the second phase of the Sloan Extension for Galactic Understanding and Evolution (SEGUE-2), consisting of spectroscopy of approximately 118,000 stars at both high and low Galactic latitudes. All the more than half a million stellar spectra obtained with the SDSS spectrograph have been reprocessed through an improved stellar parameters pipeline, which has better determination of metallicity for high metallicity stars.

astro-ph.IM↗