arXiv subjects

Frieder Mugele

Publications and source records attributed to Frieder Mugele.

16 recordsLinked to original sources

arXiv2026

Kinetics of Droplet Cloaking and Wetting Ridge Growth on Lubricated Polymer Brushes

We investigate the kinetics of wetting ridge growth and droplet cloaking on lubricant-infused polymer brushes using a combination of experiments, molecular dynamics simulations, and theoretical modeling. We focus on three representative systems: DMSO-water on hexadecane-swollen PLMA (D-H), water on hexadecane-swollen PLMA (W-H), and water on PDMS (W-S). The dynamics are governed by the interplay between interfacial thermodynamics, brush elasticity, and transport of lubricant within the brush. Ridge growth is accompanied by the formation of depletion zones both beneath and outside the drop. This leads to a progressive slowdown governed by the need to transport lubricant through the brush. At sufficiently high swelling, we observe local separation of oil from the brush within the ridge, providing an additional mechanism for lubricant depletion. To rationalize these observations, we develop a continuum diffusion model based on the free energy of the brush and its coupling to the contact line. The model quantitatively captures the growth of the wetting ridge at intermediate and late times, demonstrating that the kinetics are largely controlled by diffusive transport within the brush.

cond-mat.soft↗

arXiv2023

Non-equilibrium configurations of swelling polymer brush layers induced by spreading drops of weakly volatile oil

Polymer brush layers are responsive materials that swell in contact with good solvents and their vapors. We deposit drops of an almost completely wetting volatile oil onto an oleophilic polymer brush layer and follow the response of the system upon simultaneous exposure to both liquid and vapor. Interferometric imaging shows that a halo of partly swollen polymer brush layer forms ahead of the moving contact line. The swelling dynamics of this halo is controlled by a subtle balance of direct imbibition from the drop into the brush layer and vapor phase transport and can lead to very long-lived transient swelling profiles as well as non-equilibrium configurations involving thickness gradients in a stationary state. A gradient dynamics model based on a free energy functional with three coupled fields is developed and numerically solved. It describes experimental observations and reveals how local evaporation and condensation conspire to stabilize the inhomogeneous non-equilibrium stationary swelling profiles. A quantitative comparison of experiments and calculations provides access to the solvent diffusion coefficient within the brush layer. Overall, the results highlight the - presumably generally applicable - crucial role of vapor phase transport in dynamic wetting phenomena involving volatile liquids on swelling functional surfaces.

cond-mat.soft↗

arXiv2022

Absence of anomalous underscreening in highly concentrated aqueous electrolytes confined between smooth silica surfaces

Recent experiments and a series of subsequent theoretical studies suggest the occurrence of universal underscreening in highly concentrated electrolyte solutions. We performed a set of systematic Atomic Force Spectroscopy measurements for aqueous salt solutions in a concentration range from 1 mM to 5 M using chloride salts of various alkali metals as well as mixed concentrated salt solutions (involving both mono- and divalent cations and anions), that mimic concentrated brines typically encountered in geological formations. Experiments were carried out using flat substrates and submicrometer-sized colloidal probes made of smooth oxidized silicon immersed in salt solutions at pH values of 6 and 9 and temperatures of 25 °C and 45 °C. While strong repulsive forces were observed for the smallest tip-sample separations, none of the conditions explored displayed any indication of anomalous long range electrostatic forces as reported for macroscopic mica surfaces. Instead, forces are universally dominated by attractive van der Waals interactions at tip-sample separations of $\approx$2nm and beyond for salt concentrations of 1 M and higher. Complementary calculations based on classical density functional theory for the primitive model support these experimental observations and display a consistent decrease in screening length with increasing ion concentration.

cond-mat.soft↗

arXiv2021

Roughness Induced Rotational Slowdown Near the Colloidal Glass Transition

Roughening the surface of spherical colloids can drastically change their translational and rotational dynamics in dense suspensions. Using 3D confocal microscopy, we show that roughness not only lowers the concentration of the translational colloidal glass transition, but also generates a broad concentration range in which the rotational Brownian motion changes signature from high-amplitude diffusive to low-amplitude rattling. This hitherto not reported second glass transition for rough spherical colloids emerges when the particle intersurface distance becomes comparable to the roughness length scale. Interlocking contacts are responsible for restricting the particle rotations.

cond-mat.soft↗

arXiv2020

Electrowetting-Controlled Dropwise Condensation with Patterned Electrodes: Physical Principles, Modeling, and Application Perspectives for Fog Harvesting and Enhanced Heat Transfer

Patterning the wettability of solid surfaces is a successful strategy to control the dropwise condensation of vapor onto partially wetting solid surfaces. We followed the condensation of water vapor onto electrowetting-functionalized surfaces with structured co-planar electrodes. A detailed analysis of the experimental distribution of millions of drops reveals that despite the presence of contact angle hysteresis and the occurrence of random drop coalescence events, the preferential drop position closely follows the evolution of the local minima of the numerically calculated drop size-dependent electrostatic energy landscape in two dimensions. Even subtle transitions between competing preferred locations are properly reproduced by the model. Based on this quantitative understanding of the condensation patterns, we discuss a series of important follow-up steps that need to be taken to demonstrate a reliable performance gain in various applications focusing in particular on enhanced heat transfer.

physics.flu-dyn↗

arXiv2020

Spherical probes for simultaneous measurement of rotational and translational diffusion in 3 dimensions

Real time visualization and tracking of colloidal particles with 3D resolution is essential for probing the local structure and dynamics in complex fluids. Although tracking translational motion of spherical colloids is well-known, accessing rotational dynamics of such particles remains a great challenge. Here, we report a novel approach of using fluorescently labeled raspberry-like colloids with an optical anisotropy to concurrently track translational and rotational dynamics in 3 dimensions. The raspberry-like particles are coated by a silica layer of adjustable thickness, which allows tuning the surface roughness. The synthesis and applicability of the proposed method is demonstrated by two types of probes: rough and smoothened. The accuracy of measuring Mean Squared (Angular) Displacements are also demonstrated by using these 2 probes dispersed in 2 different solvents. The presented 3D trackable colloids offer a high potential for wide range of applications and studies, such as probing crystallization dynamics, phase transitions and the effect of surface roughness on diffusion.

physics.app-ph↗

arXiv2020

Electric generation from drops impacting onto charged surfaces

The impact of liquid drops onto solid surfaces leads to conversion of kinetic energy of directed drop motion into various forms of energy including surface energy, vibrational energy, heat, and under suitable conditions, electrical energy. The latter has attracted substantial attention in recent years for its potential to directly convert energy from random environmental flows such as rainfall, spray, and wave motion on the sea to electrical energy. Despite the invention of numerous configurations of such energy harvesters, the underlying physical principles and optimum operation conditions have remained elusive. In this letter, we use a combination of high-speed electrical current and video imaging measurements to develop a parameter-free quantitative description of the energy harvesting process for an optimized electrode configuration. A novel electrowetting-assisted charge injection method, EWCI, enables highly stable surface charges and robust energy conversion for several months with record efficiencies exceeding 2.5 percent of the initial kinetic energy.

physics.app-ph↗

arXiv2019

Electrically controlled localized charge trapping at amorphous fluoropolymer-electrolyte interfaces

Charge trapping is a long-standing problem in electrowetting-on-dielectric (EWOD), causing reliability reduction and restricting its practical applications. Although this phenomenon has been investigated macroscopically, the microscopic investigations are still lacking. In this work, the trapped charges are proven to be localized at three-phase contact line region by using three detecting methods -- local contact angle measurements, electrowetting (EW) probe, and Kelvin Probe Force Microscopy (KPFM). Moreover, we demonstrate that this EW-induced charge trapping phenomenon can be utilized as a simple and low-cost method to deposit charges on fluoropolymer surfaces. Charge density near the three-phase contact line up to 0.46 mC/m2 and the line width with deposited charges ranging from 20 to 300 micrometer are achieved by the proposed method. Particularly, negative charge densities do not degrade even after harsh testing with a water droplet on top of the sample surfaces for 12 hours, as well as after being treated by water vapor for 3 hours. These findings provide an approach for applications which desire stable and controllable surface charges.

physics.app-ph↗

arXiv2019

Characterizing the fluid-matrix affinity in an organogel from the growth dynamics of oil stains on blotting paper

Grease, as used for lubrication of rolling bearings, is a two-phase organogel that slowly releases oil from its gelator matrix. Because the rate of release determines the operation time of the bearing, we study this release process by measuring the amount of extracted oil as a function of time, while we use absorbing paper, to speed up the process. The oil concentration in the resulting stain is determined by measuring the attenuation of light transmitted through the paper, using a modified Lambert-Beer law. For grease the timescale for paper imbibition is typically 2 orders of magnitude larger than for a bare drop of the same base oil. This difference results from the high affinity, \it i.e. wetting energy per unit volume, of the oil for the grease matrix. To quantify this affinity, we developed a Washburn-like model describing the oil flow from the porous grease into the paper pores. The stain radius versus time curves for greases at various levels of oil content collapse onto a single master curve, which allows us to extract a characteristic spreading time and the corresponding oil-matrix affinity. Lowering the oil content results in a small increase of the oil-matrix affinity yet in a significant change in the spreading timescale. Even an affinity increase by a few per mill doubles the timescale.

cond-mat.soft↗

arXiv2019

Behaviour of flexible superhydrophobic striped surfaces during (electro-)wetting of a sessile drop

We study here the microscopic deformations of elastic lamellae constituting a superhydrophobic substrate under different wetting conditions of a sessile droplet using electrowetting. The deformation profiles of the lamellae are experimentally evaluated using confocal microscopy. These experimental results are then explained using a variational principle formalism within the framework of linear elasticity. We show that the local deformation profile of a lamella is mainly controlled by the net horizontal component of the capillary forces acting on its top due to the pinned droplet contact line. We also discuss the indirect role of electrowetting in dictating the deformation characteristics of the elastic lamellae. One important conclusion is that the small deflection assumption, which is frequently used in the literature, fails to provide a quantitative description of the experimental results; a full solution of the non-linear governing equation is necessary to describe the experimentally obtained deflection profiles.

cond-mat.soft↗

arXiv2019

Soft electrowetting

Electrowetting is a commonly used tool to manipulate sessile drops on hydrophobic surfaces. By applying an external voltage over a liquid and a dielectric-coated surface, one achieves a reduction of the macroscopic contact angles for increasing voltage. The electrostatic forces all play out near the contact line, on a scale of the order of the thickness of the solid dielectric layer. Here we explore the case where the dielectric is a soft elastic layer, which deforms elastically under the effect of electrostatic and capillary forces. The wetting behaviour is quantified by measurements of the static and dynamic contact angles, complemented by confocal microscopy to reveal the elastic deformations. Even though the mechanics near the contact line is highly intricate, the macroscopic contact angles can be understood from global conservation laws in the spirit of Young-Lippmann. The key finding is that, while elasticity has no effect on the static electrowetting angle, the substrate's viscoelasticity completely dictates the spreading dynamics of electrowetting.

cond-mat.soft↗

arXiv2018

Controlling shedding characteristics of condensate drops using electrowetting

We show here that ac electrowetting (ac-EW) with structured electrodes can be used to control the gravity-driven shedding of drops condensing onto flat hydrophobic surfaces. Under ac-EW with straight interdigitated electrodes, the condensate drops shed with relatively smaller radii due to the ac-EW-induced reduction of contact angle hysteresis. The smaller shedding radius, coupled with the enhanced growth due to coalescence under EW, results in increased shedding rate. We also show that the condensate droplet pattern under EW can be controlled, and the coalescence can be further enhanced, using interdigitated electrodes with zigzag edges. Such enhanced coalescence in conjunction with the electrically-induced trapping effect due to the electrode geometry results in larger shedding radius, but lower shedding rate. However, the shedding characteristics can be further optimized by applying the electrical voltage intermittently. We finally provide an estimate of the condensate volume removed per unit time in order to highlight how it is enhanced using ac-EW-controlled dropwise condensation.

physics.flu-dyn↗

arXiv2018

Breath figures under electrowetting: electrically controlled evolution of drop condensation patterns

We show that electrowetting (EW) with structured electrodes significantly modifies the distribution of drops condensing onto flat hydrophobic surfaces by aligning the drops and by enhancing coalescence. Numerical calculations demonstrate that drop alignment and coalescence are governed by the drop size-dependent electrostatic energy landscape that is imposed by the electrode pattern and the applied voltage. Such EW-controlled migration and coalescence of condensate drops significantly alter the statistical characteristics of the ensemble of droplets. The evolution of the drop size distribution displays self-similar characteristics that significantly deviate from classical breath figures on homogeneous surfaces once the electrically-induced coalescence cascades set in beyond a certain critical drop size. The resulting reduced surface coverage, coupled with earlier drop shedding under EW, enhances the net heat transfer.

physics.flu-dyn↗

arXiv2018

Contact angle hysteresis and oil film lubrication in electrowetting with two immiscible liquids

Electrowetting (EW) of water drops in ambient oil has found a wide range of applications including lab-on-a-chip devices, display screens, and variable focus lenses. The efficacy of all these applications is dependent on the contact angle hysteresis (CAH), which is generally reduced in the presence of ambient oil due to thin lubrication layers. While it is well-known that AC voltage reduces the effective contact angle hysteresis (CAH) for EW in ambient air, we demonstrate here that CAH for EW in ambient oil increases with increasing AC and DC voltage. Taking into account the disjoining pressure of the fluoropolymer-oil-water system, short range chemical interactions, viscous oil entrainment and electrostatic stresses, we find that this observation can be explained by progressive thinning of the oil layer underneath the drop with increasing voltage. This exposes the droplet to the roughness of the underlying solid and thereby increases hysteresis.

physics.flu-dyn↗

arXiv2007

Nanometer-Resolved Collective Micromeniscus Oscillations through Optical Diffraction

We study the dynamics of periodic arrays of micrometer-sized liquid-gas menisci formed at superhydrophobic surfaces immersed into water. By measuring the intensity of optical diffraction peaks in real time we are able to resolve nanometer scale oscillations of the menisci with sub-microsecond time resolution. Upon driving the system with an ultrasound field at variable frequency we observe a pronounced resonance at a few hundred kHz, depending on the exact geometry. Modeling the system using the unsteady Stokes equation, we find that this low resonance frequency is caused by a collective mode of the acoustically coupled oscillating menisci.

cond-mat.soft↗

arXiv2003

Mixing and condensation in a wet granular medium

We have studied the effect of small amounts of added liquid on the dynamic behavior of a granular system consisting of a mixture of glass beads of two different sizes. Segregation of the large beads to the top of the sample is found to depend in a nontrivial way on the liquid content. A transition to viscoplastic behavior occurs at a critical liquid content, which depends upon the bead size. We show that this transition can be interpreted as a condensation due to the hysteretic liquid bridge forces connecting the beads, and provide the corresponding phase diagram.

cond-mat.stat-mech↗