SearcharxivSearch

arXiv subjects

Fumin Zhang

Publications and source records attributed to Fumin Zhang.

At least 19 recordsLinked to original sources

Interleaved POMDP Planning for Multi-Object Search in Unknown Multi-Room Household Environments

Multi-object search in unknown household environments requires planning under extensive uncertainty - from unknown object locations to cluttered spaces with unobserved obstacles. POMDPs offer a principled framework for such problems but remain intractable in large domains. We propose Inter-POMDP, a novel interleaved POMDP planning algorithm that decomposes this challenge into two interacting levels: a high-level POUCT planner reasons over object distributions using LLM-informed histogram beliefs, while a low-level motion planner models navigation uncertainty with obstacle-aware particle beliefs as domain knowledge to guide high-level POUCT. This interleaved design balances planning quality and efficiency despite the large search space across unknown multi-room environments. Both simulation and real-world experiments show that our Inter-POMDP algorithm reduces collision counts by up to 63%, navigation steps by up to 35%, and detection counts by up to 32% compared with baseline methods. Full videos are https://sites.google.com/view/inter-pomdp

cs.RO

RICH-SLAM: Radar SLAM with Incremental and Continuous Hilbert Mapping

Simultaneous localization and mapping using radar sensors has gained increasing attention due to radar's inherent robustness to adverse weather and lighting conditions. However, radar measurements are characteristically sparse and noisy compared to LiDAR and visual data, posing significant challenges in achieving dense, continuous, and consistent map representations. In this paper, we present RICH-SLAM, a radar SLAM framework designed to address these challenges. Our approach features a Rao-Blackwellized particle filter-based back end that employs particle filtering for pose estimation and Kalman filtering for map updates. We propose an incremental Hilbert-space reduced-rank Gaussian process mapping strategy that enables continuous and uncertainty-aware map representations given sparse radar inputs. We further introduce a posterior-aware particle weighting scheme that leverages the full posterior distribution of map parameters for more robust likelihood evaluation. Experiments on self-collected and public ColoRadar datasets show that RICH-SLAM constructs continuous occupancy maps from sparse radar measurements and supports uncertainty-aware planning for mobile robots.

cs.RO

RoboHitch: Learning Visual Affordance from Disordered Keypoints for Hitch Knots Tying

Robotic manipulation of deformable linear objects (DLOs) presents significant challenges due to complex dynamics and frequent self-occlusions. Existing robotic knot tying methods typically rely on precise topological state tracking with ordered keypoints and explicit edge connectivity. This reliance makes them prone to failures due to tracking drift and topology mismatch caused by repeated bending and crossings during knot formation.To address these limitations, we introduce RoboHitch, a novel framework that learns to perform hitch knot tying from human demonstrations using only disordered 3D keypoints and RGB images. This eliminates the need for explicit topological order, allowing for more flexible manipulation. Our method employs a dynamic Graph Autoencoder to extract geometric features from untracked keypoints, complemented by a Convolutional Autoencoder that captures essential visual context. A bidirectional cross-attention mechanism then fuses these modalities to jointly predict pick and place affordances, facilitating implicit reasoning about the rope's state and enabling knot tying under occlusion.Real-world experiments demonstrate the effectiveness and generalizability of our approach, successfully completing hitch knots in scenarios with self-occlusions.

cs.RO

Learning Spatially Adaptive Structural Coordination for Underwater Salient Object Detection

Underwater salient object detection (USOD) has attracted increasing attention for underwater scene understanding and vision-guided robotic applications. However, the spatially non-uniform degradation in underwater images causes spatially varying reliability of structural cues: boundary-sensitive responses can enhance object contours but are vulnerable to degradation-induced noise, whereas region-coherent responses improve semantic completeness but may blur object boundaries. Existing methods rarely explicitly consider the spatial variation in structural cue reliability under underwater image degradation. To address this problem, this work proposes SASC-USOD, a novel framework for learning spatially adaptive structural coordination in USOD. The proposed framework constructs two complementary structural representations with different characteristics. A boundary-sensitive representation is obtained by combining fixed Laplacian filtering with a learnable local-detail transformation to enhance discriminative boundary information, while a region-coherent representation is generated through dual-range anisotropic large-kernel contextual aggregation to capture long-range structural consistency. A spatial coordination module is then introduced to estimate the relative reliability of these structural representations and adaptively coordinate their contributions according to image content. Extensive experiments on the USOD10K and USOD benchmarks demonstrate that SASC-USOD consistently outperforms existing methods, reducing MAE by 4.07\% and 23.53\% compared with the strongest competing method, respectively. Moreover, its lightweight variant runs at 21 FPS on an NVIDIA Jetson TX2 NX, demonstrating its capability for onboard underwater robotic perception.

cs.CV

LDHP: Library-Driven Hierarchical Planning for Non-prehensile Dexterous Manipulation

Non-prehensile manipulation is essential for handling thin, large, or otherwise ungraspable objects in unstructured settings. Prior planning and search-based methods often rely on ad-hoc manual designs or generate physically unrealizable motions by ignoring critical gripper properties, while training-based approaches are data-intensive and struggle to generalize to novel, out-of-distribution tasks. We propose a library-driven hierarchical planner (LDHP) that makes executability a first-class design goal: a top-tier contact-state planner proposes object-pose paths using MoveObject primitives, and a bottom-tier grasp planner synthesizes feasible grasp sequences with AdjustGrasp primitives; feasibility is certified by collision checks and quasi-static mechanics, and contact-sensitive segments are recovered via a bounded dichotomy refinement. This gripper-aware decomposition decouples object motion from grasp realizability, yields a task-agnostic pipeline that transfers across manipulation tasks and geometric variations without re-design, and exposes clean hooks for optional learned priors. Real-robot studies on zero-mobility lifting and slot insertion demonstrate consistent execution and robustness to shape and environment changes.

cs.RO

USIS-PGM: Photometric Gaussian Mixtures for Underwater Salient Instance Segmentation

Underwater salient instance segmentation (USIS) is crucial for marine robotic systems, as it enables both underwater salient object detection and instance-level mask prediction for visual scene understanding. Compared with its terrestrial counterpart, USIS is more challenging due to the underwater image degradation. To address this issue, this paper proposes USIS-PGM, a single-stage framework for USIS. Specifically, the encoder enhances boundary cues through a frequency-aware module and performs content-adaptive feature reweighting via a dynamic weighting module. The decoder incorporates a Transformer-based instance activation module to better distinguish salient instances. In addition, USIS-PGM employs multi-scale Gaussian heatmaps generated from ground-truth masks through Photometric Gaussian Mixture (PGM) to supervise intermediate decoder features, thereby improving salient instance localization and producing more structurally coherent mask predictions. Experimental results demonstrate the superiority and practical applicability of the proposed USIS-PGM model.

cs.CV

TacLoc: Global Tactile Localization on Objects from a Registration Perspective

Pose estimation is essential for robotic manipulation, particularly when visual perception is occluded during gripper-object interactions. Existing tactile-based methods generally rely on tactile simulation or pre-trained models, which limits their generalizability and efficiency. In this study, we propose TacLoc, a novel tactile localization framework that formulates the problem as a one-shot point cloud registration task. TacLoc introduces a graph-theoretic partial-to-full registration method, leveraging dense point clouds and surface normals from tactile sensing for efficient and accurate pose estimation. Without requiring rendered data or pre-trained models, TacLoc achieves improved performance through normal-guided graph pruning and a hypothesis-and-verification pipeline. TacLoc is evaluated extensively on the YCB dataset. We further demonstrate TacLoc on real-world objects across two different visual-tactile sensors.

cs.RO

Wukong-Omni: Design, Modeling and Control of a Multi-mode Robot for Air, Land, and Underwater Exploration with All-in-One Propulsion Unit

In flood disaster rescue scenarios, partially submerged buildings prevent aerial robots from accessing lower levels, limiting mission effectiveness. To address this challenge, this paper presents Wukong-Omni, a novel multimode robot capable of operating across land, air, and underwater using a unified propulsion system. The system is enabled by an innovative mechanical design that allows motor reuse and improves thrust generation. Efficiency and peak thrust are enhanced through simulation and tank-based optimization. Experimental results show a 100 percent improvement in propulsion efficiency and a 150 percent increase in maximum thrust compared with direct installation methods. Dynamic models for the three operating domains are developed, and a unified cross-domain control framework is proposed. Comprehensive experiments validate stable locomotion and smooth transition across domains. Outdoor experiments further demonstrate robustness and adaptability in real-world environments.

cs.RO

Learning Robust Control Policies for Inverted Pose on Miniature Blimp Robots

The ability to achieve and maintain inverted poses is essential for unlocking the full agility of miniature blimp robots (MBRs). However, developing reliable inverted control strategies for MBRs remains challenging due to their complex and underactuated dynamics. To address this challenge, we propose a novel framework that enables robust control policy learning for inverted pose on MBRs. The proposed framework consists of three core stages. First, a high-fidelity three-dimensional (3D) simulation environment is constructed and calibrated using real-world MBR motion data. Second, a robust inverted control policy is trained in simulation using a modified Twin Delayed Deep Deterministic Policy Gradient (TD3) algorithm combined with a domain randomization strategy. Third, a mapping layer is designed to bridge the sim-to-real gap and facilitate real-world deployment of the learned policy. Comprehensive evaluations in the simulation environment demonstrate that the learned policy achieves a higher success rate compared to the energy-shaping controller. Furthermore, experimental results confirm that the learned policy with a mapping layer enables an MBR to achieve and maintain a fully inverted pose in real-world settings.

cs.RO

Bayesian Risk-averse Model Predictive Control with Consistency and Stability Guarantees

Model Predictive Control (MPC) is a powerful framework for constrained control, but its performance and safety can be severely degraded when the prediction model is learned online and thus remains uncertain. In this work, we develop a Bayesian risk-averse MPC framework for stochastic, discrete-time, nonlinear systems that provides theoretical guarantees on the consistency of Bayesian learning and closed-loop stability. First, we study Bayesian learning under the conditionally independent state transitions induced by feedback control and establish explicit conditions for Bayesian consistency on an infinitely countable parameter space. Second, we introduce a general notion of risk-averse asymptotic stability (RAAS), defined via comparison function classes and independent of any specific coherent risk measure or convergence rate, and we derive a risk-averse Lyapunov stability theorem together with MPC-specific stability conditions. Third, building on these foundations, we design a practical Bayesian risk-averse MPC scheme that separates epistemic (parametric) and aleatoric (disturbance) uncertainty: additive disturbances are treated in a risk-neutral fashion, while parametric uncertainty is managed via dynamically shrinking ambiguity sets constructed from Bayesian credible intervals, approximated online using particle filtering. To enable real-time implementation, we propose both an optimal and a sub-optimal receding-horizon control policy, the latter obtained by warm-starting from the previous solution, and prove that asymptotic RAAS is recovered as the Bayesian estimator becomes consistent.

math.OC

Learning Robust Regions of Attraction Using Rollout-Enhanced Physics-Informed Neural Networks with Policy Iteration

The region of attraction is a key metric of the robustness of systems. This paper addresses the numerical solution of the generalized Zubov's equation, which produces a special Lyapunov function characterizing the robust region of attraction for perturbed systems. To handle the highly nonlinear characteristic of the generalized Zubov's equation, we propose a physics-informed neural network framework that employs a policy iteration training scheme with rollout to approximate the viscosity solution. In addition to computing the optimal disturbance during the policy improvement process, we incorporate neural network-generated value estimates as anchor points to facilitate the training procedure to prevent singularities in both low- and high-dimensional systems. Numerical simulations validate the effectiveness of the proposed approach.

eess.SY

CaRoBio: 3D Cable Routing with a Bio-inspired Gripper Fingernail

The manipulation of deformable linear flexures has a wide range of applications in industry, such as cable routing in automotive manufacturing and textile production. Cable routing, as a complex multi-stage robot manipulation scenario, is a challenging task for robot automation. Common parallel two-finger grippers have the risk of over-squeezing and over-tension when grasping and guiding cables. In this paper, a novel eagle-inspired fingernail is designed and mounted on the gripper fingers, which helps with cable grasping on planar surfaces and in-hand cable guiding operations. Then we present a single-grasp end-to-end 3D cable routing framework utilizing the proposed fingernails, instead of the common pick-and-place strategy. Continuous control is achieved to efficiently manipulate cables through vision-based state estimation of task configurations and offline trajectory planning based on motion primitives. We evaluate the effectiveness of the proposed framework with a variety of cables and channel slots, significantly outperforming the pick-and-place manipulation process under equivalent perceptual conditions. Our reconfigurable task setting and the proposed framework provide a reference for future cable routing manipulations in 3D space.

cs.RO

A Vision-Based Collision Sensing Method for Stable Circular Object Grasping with A Soft Gripper System

External collisions to robot actuators typically pose risks to grasping circular objects. This work presents a vision-based sensing module capable of detecting collisions to maintain stable grasping with a soft gripper system. The system employs an eye-in-palm camera with a broad field of view to simultaneously monitor the motion of fingers and the grasped object. Furthermore, we have developed a collision-rich grasping strategy to ensure the stability and security of the entire dynamic grasping process. A physical soft gripper was manufactured and affixed to a collaborative robotic arm to evaluate the performance of the collision detection mechanism. An experiment regarding testing the response time of the mechanism confirmed the system has the capability to react to the collision instantaneously. A dodging test was conducted to demonstrate the gripper can detect the direction and scale of external collisions precisely.

cs.RO

Interleaved LLM and Motion Planning for Generalized Multi-Object Collection in Large Scene Graphs

Household robots have been a longstanding research topic, but they still lack human-like intelligence, particularly in manipulating open-set objects and navigating large environments efficiently and accurately. To push this boundary, we consider a generalized multi-object collection problem in large scene graphs, where the robot needs to pick up and place multiple objects across multiple locations in a long mission of multiple human commands. This problem is extremely challenging since it requires long-horizon planning in a vast action-state space under high uncertainties. To this end, we propose a novel interleaved LLM and motion planning algorithm Inter-LLM. By designing a multimodal action cost similarity function, our algorithm can both reflect the history and look into the future to optimize plans, striking a good balance of quality and efficiency. Simulation experiments demonstrate that compared with latest works, our algorithm improves the overall mission performance by 30% in terms of fulfilling human commands, maximizing mission success rates, and minimizing mission costs.

cs.RO

Control of Marine Robots in the Era of Data-Driven Intelligence

The control of marine robots has long relied on model-based methods grounded in classical and modern control theory. However, the nonlinearity and uncertainties inherent in robot dynamics, coupled with the complexity of marine environments, have revealed the limitations of conventional control methods. The rapid evolution of machine learning has opened new avenues for incorporating data-driven intelligence into control strategies, prompting a paradigm shift in the control of marine robots. This paper provides a review of recent progress in marine robot control through the lens of this emerging paradigm. The review covers both individual and cooperative marine robotic systems, highlighting notable achievements in data-driven control of marine robots and summarizing open-source resources that support the development and validation of advanced control methods. Finally, several future perspectives are outlined to guide research toward achieving high-level autonomy for marine robots in real-world applications. This paper aims to serve as a roadmap toward the next-generation control framework of marine robots in the era of data-driven intelligence.

cs.RO

VIMS: A Visual-Inertial-Magnetic-Sonar SLAM System in Underwater Environments

In this study, we present a novel simultaneous localization and mapping (SLAM) system, VIMS, designed for underwater navigation. Conventional visual-inertial state estimators encounter significant practical challenges in perceptually degraded underwater environments, particularly in scale estimation and loop closing. To address these issues, we first propose leveraging a low-cost single-beam sonar to improve scale estimation. Then, VIMS integrates a high-sampling-rate magnetometer for place recognition by utilizing magnetic signatures generated by an economical magnetic field coil. Building on this, a hierarchical scheme is developed for visual-magnetic place recognition, enabling robust loop closure. Furthermore, VIMS achieves a balance between local feature tracking and descriptor-based loop closing, avoiding additional computational burden on the front end. Experimental results highlight the efficacy of the proposed VIMS, demonstrating significant improvements in both the robustness and accuracy of state estimation within underwater environments.

cs.RO

Design of a Formation Control System to Assist Human Operators in Flying a Swarm of Robotic Blimps

Formation control is essential for swarm robotics, enabling coordinated behavior in complex environments. In this paper, we introduce a novel formation control system for an indoor blimp swarm using a specialized leader-follower approach enhanced with a dynamic leader-switching mechanism. This strategy allows any blimp to take on the leader role, distributing maneuvering demands across the swarm and enhancing overall formation stability. Only the leader blimp is manually controlled by a human operator, while follower blimps use onboard monocular cameras and a laser altimeter for relative position and altitude estimation. A leader-switching scheme is proposed to assist the human operator to maintain stability of the swarm, especially when a sharp turn is performed. Experimental results confirm that the leader-switching mechanism effectively maintains stable formations and adapts to dynamic indoor environments while assisting human operator.

cs.RO

SLABIM: A SLAM-BIM Coupled Dataset in HKUST Main Building

Existing indoor SLAM datasets primarily focus on robot sensing, often lacking building architectures. To address this gap, we design and construct the first dataset to couple the SLAM and BIM, named SLABIM. This dataset provides BIM and SLAM-oriented sensor data, both modeling a university building at HKUST. The as-designed BIM is decomposed and converted for ease of use. We employ a multi-sensor suite for multi-session data collection and mapping to obtain the as-built model. All the related data are timestamped and organized, enabling users to deploy and test effectively. Furthermore, we deploy advanced methods and report the experimental results on three tasks: registration, localization and semantic mapping, demonstrating the effectiveness and practicality of SLABIM. We make our dataset open-source at https://github.com/HKUST-Aerial-Robotics/SLABIM.

cs.RO