arXiv subjects

Furkan Ercan

Publications and source records attributed to Furkan Ercan.

14 recordsLinked to original sources

arXiv2023

GRAND-EDGE: A Universal, Jamming-resilient Algorithm with Error-and-Erasure Decoding

Random jammers that overpower transmitted signals are a practical concern for many wireless communication protocols. As such, wireless receivers must be able to cope with standard channel noise and jamming (intentional or unintentional). To address this challenge, we propose a novel method to augment the resilience of the recent family of universal error-correcting GRAND algorithms. This method, called Erasure Decoding by Gaussian Elimination (EDGE), impacts the syndrome check block and is applicable to any variant of GRAND. We show that the proposed EDGE method naturally reverts to the original syndrome check function in the absence of erasures caused by jamming. We demonstrate this by implementing and evaluating GRAND-EDGE and ORBGRAND-EDGE. Simulation results, using a Random Linear Code (RLC) with a code rate of $105/128$, show that the EDGE variants lower both the Block Error Rate (BLER) and the computational complexity by up to five order of magnitude compared to the original GRAND and ORBGRAND algorithms. We further compare ORBGRAND-EDGE to Ordered Statistics Decoding (OSD), and demonstrate an improvement of up to three orders of magnitude in the BLER.

cs.IT↗

arXiv2022

A General Security Approach for Soft-information Decoding against Smart Bursty Jammers

Malicious attacks such as jamming can cause significant disruption or complete denial of service (DoS) to wireless communication protocols. Moreover, jamming devices are getting smarter, making them difficult to detect. Forward error correction, which adds redundancy to data, is commonly deployed to protect communications against the deleterious effects of channel noise. Soft-information error correction decoders obtain reliability information from the receiver to inform their decoding, but in the presence of a jammer such information is misleading and results in degraded error correction performance. As decoders assume noise occurs independently to each bit, a bursty jammer will lead to greater degradation in performance than a non-bursty one. Here we establish, however, that such temporal dependencies can aid inferences on which bits have been subjected to jamming, thus enabling counter-measures. In particular, we introduce a pre-decoding processing step that updates log-likelihood ratio (LLR) reliability information to reflect inferences in the presence of a jammer, enabling improved decoding performance for any soft detection decoder. The proposed method requires no alteration to the decoding algorithm. Simulation results show that the method correctly infers a significant proportion of jamming in any received frame. Results with one particular decoding algorithm, the recently introduced ORBGRAND, show that the proposed method reduces the block-error rate (BLER) by an order of magnitude for a selection of codes, and prevents complete DoS at the receiver.

cs.IT↗

arXiv2022

High-Throughput and Energy-Efficient VLSI Architecture for Ordered Reliability Bits GRAND

Ultra-reliable low-latency communication (URLLC), a major 5G New-Radio use case, is the key enabler for applications with strict reliability and latency requirements. These applications necessitate the use of short-length and high-rate codes. Guessing Random Additive Noise Decoding (GRAND) is a recently proposed Maximum Likelihood (ML) decoding technique for these short-length and high-rate codes. Rather than decoding the received vector, GRAND tries to infer the noise that corrupted the transmitted codeword during transmission through the communication channel. As a result, GRAND can decode any code, structured or unstructured. GRAND has hard-input as well as soft-input variants. Among these variants, Ordered Reliability Bits GRAND (ORBGRAND) is a soft-input variant that outperforms hard-input GRAND and is suitable for parallel hardware implementation. This work reports the first hardware architecture for ORBGRAND, which achieves an average throughput of up to $42.5$ Gbps for a code length of $128$ at a target FER of $10^{-7}$. Furthermore, the proposed hardware can be used to decode any code as long as the length and rate constraints are met. In comparison to the GRANDAB, a hard-input variant of GRAND, the proposed architecture enhances decoding performance by at least $2$ dB. When compared to the state-of-the-art fast dynamic successive cancellation flip decoder (Fast-DSCF) using a 5G polar $(128,105)$ code, the proposed ORBGRAND VLSI implementation has $49\times$ higher average throughput, $32\times$ times more energy efficiency, and $5\times$ more area efficiency while maintaining similar decoding performance.

cs.IT↗

arXiv2021

High-Throughput VLSI architecture for Soft-Decision decoding with ORBGRAND

Guessing Random Additive Noise Decoding (GRAND) is a recently proposed approximate Maximum Likelihood (ML) decoding technique that can decode any linear error-correcting block code. Ordered Reliability Bits GRAND (ORBGRAND) is a powerful variant of GRAND, which outperforms the original GRAND technique by generating error patterns in a specific order. Moreover, their simplicity at the algorithm level renders GRAND family a desirable candidate for applications that demand very high throughput. This work reports the first-ever hardware architecture for ORBGRAND, which achieves an average throughput of up to $42.5$ Gbps for a code length of $128$ at an SNR of $10$ dB. Moreover, the proposed hardware can be used to decode any code provided the length and rate constraints. Compared to the state-of-the-art fast dynamic successive cancellation flip decoder (Fast-DSCF) using a 5G polar $(128,105)$ code, the proposed VLSI implementation has $49\times$ more average throughput while maintaining similar decoding performance.

cs.IT↗

arXiv2020

Practical Dynamic SC-Flip Polar Decoders: Algorithm and Implementation

SC-Flip (SCF) is a low-complexity polar code decoding algorithm with improved performance, and is an alternative to high-complexity (CRC)-aided SC-List (CA-SCL) decoding. However, the performance improvement of SCF is limited since it can correct up to only one channel error ($ω=1$). Dynamic SCF (DSCF) algorithm tackles this problem by tackling multiple errors ($ω\geq 1$), but it requires logarithmic and exponential computations, which make it infeasible for practical applications. In this work, we propose simplifications and approximations to make DSCF practically feasible. First, we reduce the transcendental computations of DSCF decoding to a constant approximation. Then, we show how to incorporate special node decoding techniques into DSCF algorithm, creating the Fast-DSCF decoding. Next, we reduce the search span within the special nodes to further reduce the computational complexity. Following, we describe a hardware architecture for the Fast-DSCF decoder, in which we introduce additional simplifications such as metric normalization and sorter length reduction. All the simplifications and approximations are shown to have minimal impact on the error-correction performance, and the reported Fast-DSCF decoder is the only SCF-based architecture that can correct multiple errors. The Fast-DSCF decoders synthesized using TSMC $65$nm CMOS technology can achieve a $1.25$, $1.06$ and $0.93$ Gbps throughput for $ω\in \{1,2,3\}$, respectively. Compared to the state-of-the-art fast CA-SCL decoders with equivalent FER performance, the proposed decoders are up to $5.8\times$ more area-efficient. Finally, observations at energy dissipation indicate that the Fast-DSCF is more energy-efficient than its CA-SCL-based counterparts.

cs.IT↗

arXiv2020

Fast Thresholded SC-Flip Decoding of Polar Codes

SC-Flip (SCF) decoding algorithm shares the attention with the common polar code decoding approaches due to its low-complexity and improved error-correction performance. However, the inefficient criterion for locating the correct bit-flipping position in SCF decoding limits its improvements. Due to its improved bit-flipping criterion, Thresholded SCF (TSCF) decoding algorithm exhibits a superior error-correction performance and lower computational complexity than SCF decoding. However, the parameters of TSCF decoding depend on multiple channel and code parameters, and are obtained via Monte-Carlo simulations. Our main goal is to realize TSCF decoding as a practical polar decoder implementation. To this end, we first realize an approximated threshold value that is independent of the code parameters and precomputations. The proposed approximation has negligible error-correction performance degradation on the TSCF decoding. Then, we validate an alternative approach for forming a critical set that does not require precomputations, which also paves the way to the implementation of the Fast-TSCF decoder. Compared to the existing fast SCF implementations, the proposed Fast-TSCF decoder has $0.24$ to $0.41$ dB performance gain at frame error rate of $10^{-3}$, without any extra cost. Compared to the TSCF decoding, Fast-TSCF does not depend on precomputations and requires $87\%$ fewer decoding steps. Finally, implementation results in TSMC 65nm CMOS technology show that the Fast-TSCF decoder is $20\%$ and $82\%$ more area-efficient than the state-of-the-art fast SCF and fast SC-List decoder architectures, respectively.

cs.AR↗

arXiv2020

High-Throughput VLSI Architecture for GRAND

Guessing Random Additive Noise Decoding (GRAND) is a recently proposed universal decoding algorithm for linear error correcting codes. Since GRAND does not depend on the structure of the code, it can be used for any code encountered in contemporary communication standards or may even be used for random linear network coding. This property makes this new algorithm particularly appealing. Instead of trying to decode the received vector, GRAND attempts to identify the noise that corrupted the codeword. To that end, GRAND relies on the generation of test error patterns that are successively applied to the received vector. In this paper, we propose the first hardware architecture for the GRAND algorithm. Considering GRAND with ABandonment (GRANDAB) that limits the number of test patterns, the proposed architecture only needs $2+\sum_{i=2}^{n} \left\lfloor\frac{i}{2}\right\rfloor$ time steps to perform the $\sum_{i=1}^3 \binom{n}{i}$ queries required when $\text{AB}=3$. For a code length of $128$, our proposed hardware architecture demonstrates only a fraction ($1.2\%$) of the total number of performed queries as time steps. Synthesis result using TSMC 65nm CMOS technology shows that average throughputs of $32$ Gbps to $64$ Gbps can be achieved at an SNR of $10$ dB for a code length of $128$ and code rates rate higher than $0.75$, transmitted over an AWGN channel. Comparisons with a decoder tailored for a $(79,64)$ BCH code show that the proposed architecture can achieve a slightly higher average throughput at high SNRs, while obtaining the same decoding performance.

cs.IT↗

arXiv2020

Operation Merging for Hardware Implementations of Fast Polar Decoders

Polar codes are a class of linear block codes that provably achieves channel capacity. They have been selected as a coding scheme for the control channel of enhanced mobile broadband (eMBB) scenario for $5^{\text{th}}$ generation wireless communication networks (5G) and are being considered for additional use scenarios. As a result, fast decoding techniques for polar codes are essential. Previous works targeting improved throughput for successive-cancellation (SC) decoding of polar codes are semi-parallel implementations that exploit special maximum-likelihood (ML) nodes. In this work, we present a new fast simplified SC (Fast-SSC) decoder architecture. Compared to a baseline Fast-SSC decoder, our solution is able to reduce the memory requirements. We achieve this through a more efficient memory utilization, which also enables to execute multiple operations in a single clock cycle. Finally, we propose new special node merging techniques that improve the throughput further, and detail a new Fast-SSC-based decoder architecture to support merged operations. The proposed decoder reduces the operation sequence requirement by up to $39\%$, which enables to reduce the number of time steps to decode a codeword by $35\%$. ASIC implementation results with 65 nm TSMC technology show that the proposed decoder has a throughput improvement of up to $31\%$ compared to previous Fast-SSC decoder architectures.

cs.AR↗

arXiv2019

Neural Dynamic Successive Cancellation Flip Decoding of Polar Codes

Dynamic successive cancellation flip (DSCF) decoding of polar codes is a powerful algorithm that can achieve the error correction performance of successive cancellation list (SCL) decoding, with a complexity that is close to that of successive cancellation (SC) decoding at practical signal-to-noise ratio (SNR) regimes. However, DSCF decoding requires costly transcendental computations which adversely affect its implementation complexity. In this paper, we first show that a direct application of common approximation schemes on the conventional DSCF decoding results in significant error-correction performance loss. We then introduce a training parameter and propose an approximation scheme which completely removes the need to perform transcendental computations in DSCF decoding, with almost no error-correction performance degradation.

cs.IT↗

arXiv2018

Partitioned Successive-Cancellation Flip Decoding of Polar Codes

Polar codes are a class of channel capacity achieving codes that has been selected for the next generation of wireless communication standards. Successive-cancellation (SC) is the first proposed decoding algorithm, suffering from mediocre error-correction performance at moderate code length. In order to improve the error-correction performance of SC, two approaches are available: (i) SC-List decoding which keeps a list of candidates by running a number of SC decoders in parallel, thus increasing the implementation complexity, and (ii) SC-Flip decoding that relies on a single SC module, and keeps the computational complexity close to SC. In this work, we propose the partitioned SC-Flip (PSCF) decoding algorithm, which outperforms SC-Flip in terms of error-correction performance and average computational complexity, leading to higher throughput and reduced energy consumption per codeword. We also introduce a partitioning scheme that best suits our PSCF decoder. Simulation results show that at equivalent frame error rate, PSCF has up to $5 \times$ less computational complexity than the SC-Flip decoder. At equivalent average number of iterations, the error-correction performance of PSCF outperforms SC-Flip by up to $0.15$ dB at frame error rate of $10^{-3}$.

cs.IT↗

arXiv2018

Improved Bit-Flipping Algorithm for Successive Cancellation Decoding of Polar Codes

The interest in polar codes has been increasing significantly since their adoption for use in the 5$^{\rm th}$ generation wireless systems standard. Successive cancellation (SC) decoding algorithm has low implementation complexity, but yields mediocre error-correction performance at the code lengths of interest. SC-Flip algorithm improves the error-correction performance of SC by identifying possibly erroneous decisions made by SC and re-iterates after flipping one bit. It was recently shown that only a portion of bit-channels are most likely to be in error. In this work, we investigate the average log-likelihood ratio (LLR) values and their distribution related to the erroneous bit-channels, and develop the Thresholded SC-Flip (TSCF) decoding algorithm. We also replace the LLR selection and sorting of SC-Flip with a comparator to reduce the implementation complexity. Simulation results demonstrate that for practical code lengths and a wide range of rates, TSCF shows negligible loss compared to the error-correction performance obtained when all single-errors are corrected. At matching maximum iterations, TSCF has an error-correction performance gain of up to $0.45$ dB compared with SC-Flip decoding. At matching error-correction performance, the computational complexity of TSCF is reduced by up to $40\%$ on average, and requires up to $5\times$ lower maximum number of iterations.

cs.IT↗

arXiv2018

Improved Successive Cancellation Flip Decoding of Polar Codes Based on Error Distribution

Polar codes are a class of linear block codes that provably achieves channel capacity, and have been selected as a coding scheme for $5^{\rm th}$ generation wireless communication standards. Successive-cancellation (SC) decoding of polar codes has mediocre error-correction performance on short to moderate codeword lengths: the SC-Flip decoding algorithm is one of the solutions that have been proposed to overcome this issue. On the other hand, SC-Flip has a higher implementation complexity compared to SC due to the required log-likelihood ratio (LLR) selection and sorting process. Moreover, it requires a high number of iterations to reach good error-correction performance. In this work, we propose two techniques to improve the SC-Flip decoding algorithm for low-rate codes, based on the observation of channel-induced error distributions. The first one is a fixed index selection (FIS) scheme to avoid the substantial implementation cost of LLR selection and sorting with no cost on error-correction performance. The second is an enhanced index selection (EIS) criterion to improve the error-correction performance of SC-Flip decoding. A reduction of $24.6\%$ in the implementation cost of logic elements is estimated with the FIS approach, while simulation results show that EIS leads to an improvement on error-correction performance improvement up to $0.42$ dB at a target FER of $10^{-4}$.

cs.IT↗

arXiv2018

Design and Implementation of a Polar Codes Blind Detection Scheme

In blind detection, a set of candidates has to be decoded within a strict time constraint, to identify which transmissions are directed at the user equipment. Blind detection is required by the 3GPP LTE/LTE-Advanced standard, and it will be required in the 5th generation wireless communication standard (5G) as well. Polar codes have been selected for use in 5G: thus, the issue of blind detection of polar codes must be addressed. We propose a polar code blind detection scheme where the user ID is transmitted instead of some of the frozen bits. A first, coarse decoding phase helps selecting a subset of candidates that is decoded by a more powerful algorithm: an early stopping criterion is also introduced for the second decoding phase. Simulations results show good missed detection and false alarm rates, along with substantial latency gains thanks to early stopping. We then propose an architecture to implement the devised blind detection scheme, based on a tunable decoder that can be used for both phases. The architecture is synthesized and implementation results are reported for various system parameters. The reported area occupation and latency, obtained in 65 nm CMOS technology, are able to meet 5G requirements, and are guaranteed to meet them with even less resource usage in the latest technology nodes.

cs.IT↗

arXiv2017

On Error-Correction Performance and Implementation of Polar Code List Decoders for 5G

Polar codes are a class of capacity achieving error correcting codes that has been recently selected for the next generation of wireless communication standards (5G). Polar code decoding algorithms have evolved in various directions, striking different balances between error-correction performance, speed and complexity. Successive-cancellation list (SCL) and its incarnations constitute a powerful, well-studied set of algorithms, in constant improvement. At the same time, different implementation approaches provide a wide range of area occupations and latency results. 5G puts a focus on improved error-correction performance, high throughput and low power consumption: a comprehensive study considering all these metrics is currently lacking in literature. In this work, we evaluate SCL-based decoding algorithms in terms of error-correction performance and compare them to low-density parity-check (LDPC) codes. Moreover, we consider various decoder implementations, for both polar and LDPC codes, and compare their area occupation and power and energy consumption when targeting short code lengths and rates. Our work shows that among SCL-based decoders, the partitioned SCL (PSCL) provides the lowest area occupation and power consumption, whereas fast simplified SCL (Fast-SSCL) yields the lowest energy consumption. Compared to LDPC decoder architectures, different SCL implementations occupy up to 17.1x less area, dissipate up to 7.35x less power, and up to 26x less energy.

cs.IT↗