SearcharxivSearch

arXiv subjects

Fusang Zhang

Publications and source records attributed to Fusang Zhang.

9 recordsLinked to original sources

AirKey: Multimodal Acoustic-Assisted WiFi Sensing for Zero-Training Robust PIN Inference

Contactless keystroke inference via WiFi sensing highlights severe privacy threats, yet its real-world feasibility is hindered by two fundamental physical and deployment bottlenecks: the strict requirement for network privileges to acquire stable sensing streams, and the inherent "waveform fusion" ambiguity of pure WiFi signals during rapid, muscle-memory typing. To overcome these limitations, we propose AirKey, a novel cross-modal sensing framework that achieves highly stealthy, zero-training PIN eavesdropping. First, to bypass network deployment barriers, AirKey exploits fundamental IEEE 802.11 mechanisms to predictably elicit Acknowledgment (ACK) responses from unmodified target devices. By passively harvesting Channel State Information (CSI) from these ACKs using a low-cost microcontroller, AirKey secures a continuous spatial sensing stream entirely without network association. Crucially, to resolve the WiFi waveform fusion bottleneck, AirKey introduces a cross-modal complementarity mechanism. By utilizing lightweight acoustic signals as precise temporal anchors, the system robustly guides the segmentation of overlapping CSI trajectories. This joint spatiotemporal fusion strictly intersects CSI-derived spatial similarities with acoustic-guided inter-keystroke timing. Extensive real-world evaluations demonstrate that AirKey achieves over 4x higher accuracy than state-of-the-art unimodal zero-training schemes, successfully recovering device-unlock PINs within 6 attempts. Ultimately, this work exposes a critical vulnerability in contemporary smart interfaces, underscoring the severe privacy implications of ubiquitous multimodal sensing.

cs.CR

Rydberg Atomic Receivers for Net-Zero 6G Wireless Communication and Sensing: Progress, Experiments, and Sustainable Prospects

Against the backdrop of the global drive to advance the green transformation of the information and communications technology (ICT) industry and leverage technological innovation to facilitate the achievement of Net-Zero carbon goals, research into Rydberg atomic receivers (RAREs) is gaining significant interest. RAREs leverage the electron transition phenomenon for signal reception, offering significant advantages over conventional radio frequency receivers in terms of miniaturized antenna design, high sensitivity, robust interference resistance, and compact form factors, which positions them as a competitive alternative for meeting zero-carbon communication demands. This article systematically elaborates on the basic principle, state-of-the-art progress, and novel experiments of RAREs in quantum wireless communication and sensing. In this first-of-its-kind work, we experimentally verify the RARE-based orthogonal frequency division multiplexing transmission and reveal the potential of deep learning design in optimizing quantum wireless systems. Finally, we delve into the prospect of integrating RARE with existing cutting-edge application scenarios, while mapping out critical pathways for developing Rydberg-based wireless systems.

eess.SP

Pushing Bistatic Wireless Sensing toward High Accuracy at the Sub-Wavelength Scale

Contactless sensing using wireless communication signals has garnered significant attention due to its non-intrusive nature and ubiquitous infrastructure. Despite the promise, the inherent bistatic deployment of wireless communication introduces clock asynchronism, which leads to unknown phase offsets in channel response and hinders fine-grained sensing. State-of-the-art systems widely adopt the cross-antenna channel ratio to cancel these detrimental phase offsets. However, the channel ratio preserves sensing feature accuracy only at integer-wavelength target displacements, losing sub-wavelength fidelity. To overcome this limitation, we derive the first quantitative mapping between the distorted ratio feature and the ideal channel feature. Building on this foundation, we develop a robust framework that leverages channel response amplitude to recover the ideal channel feature from the distorted ratio. Real-world experiments across Wi-Fi and LoRa demonstrate that our method can effectively reconstruct sub-wavelength displacement details, achieving nearly an order-of-magnitude improvement in accuracy.

cs.IT

Beyond Physical Labels: Redefining Domains for Robust WiFi-based Gesture Recognition

In this paper, we propose GesFi, a novel WiFi-based gesture recognition system that introduces WiFi latent domain mining to redefine domains directly from the data itself. GesFi first processes raw sensing data collected from WiFi receivers using CSI-ratio denoising, Short-Time Fast Fourier Transform, and visualization techniques to generate standardized input representations. It then employs class-wise adversarial learning to suppress gesture semantic and leverages unsupervised clustering to automatically uncover latent domain factors responsible for distributional shifts. These latent domains are then aligned through adversarial learning to support robust cross-domain generalization. Finally, the system is applied to the target environment for robust gesture inference. We deployed GesFi under both single-pair and multi-pair settings using commodity WiFi transceivers, and evaluated it across multiple public datasets and real-world environments. Compared to state-of-the-art baselines, GesFi achieves up to 78% and 50% performance improvements over existing adversarial methods, and consistently outperforms prior generalization approaches across most cross-domain tasks.

cs.HC

WiRainbow: Single-Antenna Direction-Aware Wi-Fi Sensing via Dispersion Effect

Recently, Wi-Fi signals have emerged as a powerful tool for contactless sensing. During the sensing process, obtaining target direction information can provide valuable contextual insights for various applications. Existing direction estimation methods typically rely on antenna arrays, which are costly and complex to deploy in real-world scenarios. In this paper, we present WiRainbow, a novel approach that enables single-antenna-based direction awareness for Wi-Fi sensing by leveraging the dispersion effect of frequency-scanning antennas (FSAs), which can naturally steer Wi-Fi subcarriers toward distinct angles during signal transmission. To address key challenges in antenna design and signal processing, we propose a coupled-resonator-based antenna architecture that significantly expands the narrow Field-of-View inherent in conventional FSAs, improving sensing coverage. Additionally, we develop a sensing signal-to-noise-ratio-based signal processing framework that reliably estimates target direction in multipath-rich environments. We prototype WiRainbow and evaluate its performance through benchmark experiments and real-world case studies, demonstrating its ability to achieve accurate, robust, and cost-effective direction awareness for diverse Wi-Fi sensing applications.

eess.SP

PnPSelect: Plug-and-play IoT Device Selection Using Ultra-wideband Signals

In recent years, the number of Internet of Things (IoT) devices in smart homes has rapidly increased. A key challenge affecting user experience is how to enable users to efficiently and intuitively select the devices they wish to control. This paper proposes PnPSelect, a plug-and-play IoT device selection solution utilizing Ultra-wideband (UWB) technology on commercial devices. Unlike previous works, PnPSelect does not require the installation of dedicated hardware on each IoT device, thereby reducing deployment costs and complexities, and achieving true plug-and-play functionality. To enable intuitive device selection, we introduce a pointing direction estimation method that utilizes UWB readings from a single anchor to infer the user pointing direction. Additionally, we propose a lightweight device localization method that allows users to register new IoT devices by simply pointing at them from two distinct positions, eliminating the need for manual measurements. We implement PnPSelect on commercial smartphones and smartwatches and conduct extensive evaluations in both controlled laboratory settings and real-world environments. Our results demonstrate high accuracy, robustness, and adaptability, making PnPSelect a practical and scalable solution for next-generation smart home interactions.

cs.HC

Exploring quantum sensing for fine-grained liquid recognition

Recent years have witnessed the use of pervasive wireless signals (e.g., Wi-Fi, RFID, and mmWave) for sensing purposes. Due to its non-intrusive characteristic, wireless sensing plays an important role in various intelligent sensing applications. However, limited by the inherent thermal noise of RF transceivers, the sensing granularity of existing wireless sensing systems are still coarse, limiting their adoption for fine-grained sensing applications. In this paper, we introduce the quantum receiver, which does not contain traditional electronic components such as mixers, amplifiers, and analog-to-digital converters (ADCs) to wireless sensing systems, significantly reducing the source of thermal noise. By taking non-intrusive liquid recognition as an application example, we show the superior performance of quantum wireless sensing. By leveraging the unique property of quantum receiver, we propose a novel double-ratio method to address several well-known challenges in liquid recognition, eliminating the effect of liquid volume, device-target distance and container. We implement the quantum sensing prototype and evaluate the liquid recognition performance comprehensively. The results show that our system is able to recognize 17 commonly seen liquids, including very similar ones~(e.g., Pepsi and Coke) at an accuracy higher than 99.9\%. For milk expiration monitoring, our system is able to achieve an accuracy of 99.0\% for pH value measurements at a granularity of 0.1, which is much finer than that required for expiration monitoring.

physics.app-ph

An Exploration on Integrated Sensing and Communication for the Future Smart Internet of Things

Internet of Things (IoT) technologies are the foundation of a fully connected world. Currently, IoT devices (or nodes) primarily use dedicated sensors to sense and collect data at large scales, and then transmit the data to target nodes or gateways through wireless communication for further processing and analytics. In recent years, research efforts have been made to explore the feasibility of using wireless communication for sensing (while assiduously improving the transmission performance of wireless signals), in an attempt to achieve integrated sensing and communication (ISAC) for smart IoT of the future. In this paper, we leverage the capabilities of LoRa, a long-range IoT communication technology, to explore the possibility of using LoRa signals for both sensing and communication. Based on LoRa, we propose ISAC designs in two typical scenarios of smart IoT, and verify the feasibility and effectiveness of our designs in soil moisture monitoring and human presence detection.

cs.DC

Practical Issues and Challenges in CSI-based Integrated Sensing and Communication

Next-generation mobile communication network (i.e., 6G) has been envisioned to go beyond classical communication functionality and provide integrated sensing and communication (ISAC) capability to enable more emerging applications, such as smart cities, connected vehicles, AIoT and health care/elder care. Among all the ISAC proposals, the most practical and promising approach is to empower existing wireless network (e.g., WiFi, 4G/5G) with the augmented ability to sense the surrounding human and environment, and evolve wireless communication networks into intelligent communication and sensing network (e.g., 6G). In this paper, based on our experience on CSI-based wireless sensing with WiFi/4G/5G signals, we intend to identify ten major practical and theoretical problems that hinder real deployment of ISAC applications, and provide possible solutions to those critical challenges. Hopefully, this work will inspire further research to evolve existing WiFi/4G/5G networks into next-generation intelligent wireless network (i.e., 6G).

cs.NI