arXiv subjects

Gérôme Bovet

Publications and source records attributed to Gérôme Bovet.

34 records · Page 2Linked to original sources

arXiv2023

RansomAI: AI-powered Ransomware for Stealthy Encryption

Cybersecurity solutions have shown promising performance when detecting ransomware samples that use fixed algorithms and encryption rates. However, due to the current explosion of Artificial Intelligence (AI), sooner than later, ransomware (and malware in general) will incorporate AI techniques to intelligently and dynamically adapt its encryption behavior to be undetected. It might result in ineffective and obsolete cybersecurity solutions, but the literature lacks AI-powered ransomware to verify it. Thus, this work proposes RansomAI, a Reinforcement Learning-based framework that can be integrated into existing ransomware samples to adapt their encryption behavior and stay stealthy while encrypting files. RansomAI presents an agent that learns the best encryption algorithm, rate, and duration that minimizes its detection (using a reward mechanism and a fingerprinting intelligent detection system) while maximizing its damage function. The proposed framework was validated in a ransomware, Ransomware-PoC, that infected a Raspberry Pi 4, acting as a crowdsensor. A pool of experiments with Deep Q-Learning and Isolation Forest (deployed on the agent and detection system, respectively) has demonstrated that RansomAI evades the detection of Ransomware-PoC affecting the Raspberry Pi 4 in a few minutes with >90% accuracy.

cs.CR↗

arXiv2022

Adversarial attacks and defenses on ML- and hardware-based IoT device fingerprinting and identification

In the last years, the number of IoT devices deployed has suffered an undoubted explosion, reaching the scale of billions. However, some new cybersecurity issues have appeared together with this development. Some of these issues are the deployment of unauthorized devices, malicious code modification, malware deployment, or vulnerability exploitation. This fact has motivated the requirement for new device identification mechanisms based on behavior monitoring. Besides, these solutions have recently leveraged Machine and Deep Learning techniques due to the advances in this field and the increase in processing capabilities. In contrast, attackers do not stay stalled and have developed adversarial attacks focused on context modification and ML/DL evaluation evasion applied to IoT device identification solutions. This work explores the performance of hardware behavior-based individual device identification, how it is affected by possible context- and ML/DL-focused attacks, and how its resilience can be improved using defense techniques. In this sense, it proposes an LSTM-CNN architecture based on hardware performance behavior for individual device identification. Then, previous techniques have been compared with the proposed architecture using a hardware performance dataset collected from 45 Raspberry Pi devices running identical software. The LSTM-CNN improves previous solutions achieving a +0.96 average F1-Score and 0.8 minimum TPR for all devices. Afterward, context- and ML/DL-focused adversarial attacks were applied against the previous model to test its robustness. A temperature-based context attack was not able to disrupt the identification. However, some ML/DL state-of-the-art evasion attacks were successful. Finally, adversarial training and model distillation defense techniques are selected to improve the model resilience to evasion attacks, without degrading its performance.

cs.CR↗

arXiv2022

RL and Fingerprinting to Select Moving Target Defense Mechanisms for Zero-day Attacks in IoT

Cybercriminals are moving towards zero-day attacks affecting resource-constrained devices such as single-board computers (SBC). Assuming that perfect security is unrealistic, Moving Target Defense (MTD) is a promising approach to mitigate attacks by dynamically altering target attack surfaces. Still, selecting suitable MTD techniques for zero-day attacks is an open challenge. Reinforcement Learning (RL) could be an effective approach to optimize the MTD selection through trial and error, but the literature fails when i) evaluating the performance of RL and MTD solutions in real-world scenarios, ii) studying whether behavioral fingerprinting is suitable for representing SBC's states, and iii) calculating the consumption of resources in SBC. To improve these limitations, the work at hand proposes an online RL-based framework to learn the correct MTD mechanisms mitigating heterogeneous zero-day attacks in SBC. The framework considers behavioral fingerprinting to represent SBCs' states and RL to learn MTD techniques that mitigate each malicious state. It has been deployed on a real IoT crowdsensing scenario with a Raspberry Pi acting as a spectrum sensor. More in detail, the Raspberry Pi has been infected with different samples of command and control malware, rootkits, and ransomware to later select between four existing MTD techniques. A set of experiments demonstrated the suitability of the framework to learn proper MTD techniques mitigating all attacks (except a harmfulness rootkit) while consuming <1 MB of storage and utilizing <55% CPU and <80% RAM.

cs.CR↗

arXiv2022

Maximum Likelihood Distillation for Robust Modulation Classification

Deep Neural Networks are being extensively used in communication systems and Automatic Modulation Classification (AMC) in particular. However, they are very susceptible to small adversarial perturbations that are carefully crafted to change the network decision. In this work, we build on knowledge distillation ideas and adversarial training in order to build more robust AMC systems. We first outline the importance of the quality of the training data in terms of accuracy and robustness of the model. We then propose to use the Maximum Likelihood function, which could solve the AMC problem in offline settings, to generate better training labels. Those labels teach the model to be uncertain in challenging conditions, which permits to increase the accuracy, as well as the robustness of the model when combined with adversarial training. Interestingly, we observe that this increase in performance transfers to online settings, where the Maximum Likelihood function cannot be used in practice. Overall, this work highlights the potential of learning to be uncertain in difficult scenarios, compared to directly removing label noise.

cs.LG↗

arXiv2022

LwHBench: A low-level hardware component benchmark and dataset for Single Board Computers

In today's computing environment, where Artificial Intelligence (AI) and data processing are moving toward the Internet of Things (IoT) and Edge computing paradigms, benchmarking resource-constrained devices is a critical task to evaluate their suitability and performance. Between the employed devices, Single-Board Computers arise as multi-purpose and affordable systems. The literature has explored Single-Board Computers performance when running high-level benchmarks specialized in particular application scenarios, such as AI or medical applications. However, lower-level benchmarking applications and datasets are needed to enable new Edge-based AI solutions for network, system and service management based on device and component performance, such as individual device identification. Thus, this paper presents LwHBench, a low-level hardware benchmarking application for Single-Board Computers that measures the performance of CPU, GPU, Memory and Storage taking into account the component constraints in these types of devices. LwHBench has been implemented for Raspberry Pi devices and run for 100 days on a set of 45 devices to generate an extensive dataset that allows the usage of AI techniques in scenarios where performance data can help in the device management process. Besides, to demonstrate the inter-scenario capability of the dataset, a series of AI-enabled use cases about device identification and context impact on performance are presented as exploration of the published data. Finally, the benchmark application has been adapted and applied to an agriculture-focused scenario where three RockPro64 devices are present.

cs.PF↗

arXiv2022

Analyzing the Robustness of Decentralized Horizontal and Vertical Federated Learning Architectures in a Non-IID Scenario

Federated learning (FL) allows participants to collaboratively train machine and deep learning models while protecting data privacy. However, the FL paradigm still presents drawbacks affecting its trustworthiness since malicious participants could launch adversarial attacks against the training process. Related work has studied the robustness of horizontal FL scenarios under different attacks. However, there is a lack of work evaluating the robustness of decentralized vertical FL and comparing it with horizontal FL architectures affected by adversarial attacks. Thus, this work proposes three decentralized FL architectures, one for horizontal and two for vertical scenarios, namely HoriChain, VertiChain, and VertiComb. These architectures present different neural networks and training protocols suitable for horizontal and vertical scenarios. Then, a decentralized, privacy-preserving, and federated use case with non-IID data to classify handwritten digits is deployed to evaluate the performance of the three architectures. Finally, a set of experiments computes and compares the robustness of the proposed architectures when they are affected by different data poisoning based on image watermarks and gradient poisoning adversarial attacks. The experiments show that even though particular configurations of both attacks can destroy the classification performance of the architectures, HoriChain is the most robust one.

cs.LG↗

arXiv2022

A Lightweight Moving Target Defense Framework for Multi-purpose Malware Affecting IoT Devices

Malware affecting Internet of Things (IoT) devices is rapidly growing due to the relevance of this paradigm in real-world scenarios. Specialized literature has also detected a trend towards multi-purpose malware able to execute different malicious actions such as remote control, data leakage, encryption, or code hiding, among others. Protecting IoT devices against this kind of malware is challenging due to their well-known vulnerabilities and limitation in terms of CPU, memory, and storage. To improve it, the moving target defense (MTD) paradigm was proposed a decade ago and has shown promising results, but there is a lack of IoT MTD solutions dealing with multi-purpose malware. Thus, this work proposes four MTD mechanisms changing IoT devices' network, data, and runtime environment to mitigate multi-purpose malware. Furthermore, it presents a lightweight and IoT-oriented MTD framework to decide what, when, and how the MTD mechanisms are deployed. Finally, the efficiency and effectiveness of the framework and MTD mechanisms are evaluated in a real-world scenario with one IoT spectrum sensor affected by multi-purpose malware.

cs.CR↗

arXiv2022

A methodology to identify identical single-board computers based on hardware behavior fingerprinting

The connectivity and resource-constrained nature of single-board devices open the door to cybersecurity concerns affecting Internet of Things (IoT) scenarios. One of the most important issues is the presence of unauthorized IoT devices that want to impersonate legitimate ones by using identical hardware and software specifications. This situation can provoke sensitive information leakages, data poisoning, or privilege escalation in IoT scenarios. Combining behavioral fingerprinting and Machine/Deep Learning (ML/DL) techniques is a promising approach to identify these malicious spoofing devices by detecting minor performance differences generated by imperfections in manufacturing. However, existing solutions are not suitable for single-board devices since they do not consider their hardware and software limitations, underestimate critical aspects such as fingerprint stability or context changes, and do not explore the potential of ML/DL techniques. To improve it, this work first identifies the essential properties for single-board device identification: uniqueness, stability, diversity, scalability, efficiency, robustness, and security. Then, a novel methodology relies on behavioral fingerprinting to identify identical single-board devices and meet the previous properties. The methodology leverages the different built-in components of the system and ML/DL techniques, comparing the device internal behavior with each other to detect manufacturing variations. The methodology validation has been performed in a real environment composed of 15 identical Raspberry Pi 4 B and 10 Raspberry Pi 3 B+ devices, obtaining a 91.9% average TPR and identifying all devices by setting a 50% threshold in the evaluation process. Finally, a discussion compares the proposed solution with related work, highlighting the fingerprint properties not met, and provides important lessons learned and limitations.

cs.CR↗

arXiv2022

Studying the Robustness of Anti-adversarial Federated Learning Models Detecting Cyberattacks in IoT Spectrum Sensors

Device fingerprinting combined with Machine and Deep Learning (ML/DL) report promising performance when detecting cyberattacks targeting data managed by resource-constrained spectrum sensors. However, the amount of data needed to train models and the privacy concerns of such scenarios limit the applicability of centralized ML/DL-based approaches. Federated learning (FL) addresses these limitations by creating federated and privacy-preserving models. However, FL is vulnerable to malicious participants, and the impact of adversarial attacks on federated models detecting spectrum sensing data falsification (SSDF) attacks on spectrum sensors has not been studied. To address this challenge, the first contribution of this work is the creation of a novel dataset suitable for FL and modeling the behavior (usage of CPU, memory, or file system, among others) of resource-constrained spectrum sensors affected by different SSDF attacks. The second contribution is a pool of experiments analyzing and comparing the robustness of federated models according to i) three families of spectrum sensors, ii) eight SSDF attacks, iii) four scenarios dealing with unsupervised (anomaly detection) and supervised (binary classification) federated models, iv) up to 33% of malicious participants implementing data and model poisoning attacks, and v) four aggregation functions acting as anti-adversarial mechanisms to increase the models robustness.

cs.CR↗

arXiv2022

CyberSpec: Intelligent Behavioral Fingerprinting to Detect Attacks on Crowdsensing Spectrum Sensors

Integrated sensing and communication (ISAC) is a novel paradigm using crowdsensing spectrum sensors to help with the management of spectrum scarcity. However, well-known vulnerabilities of resource-constrained spectrum sensors and the possibility of being manipulated by users with physical access complicate their protection against spectrum sensing data falsification (SSDF) attacks. Most recent literature suggests using behavioral fingerprinting and Machine/Deep Learning (ML/DL) for improving similar cybersecurity issues. Nevertheless, the applicability of these techniques in resource-constrained devices, the impact of attacks affecting spectrum data integrity, and the performance and scalability of models suitable for heterogeneous sensors types are still open challenges. To improve limitations, this work presents seven SSDF attacks affecting spectrum sensors and introduces CyberSpec, an ML/DL-oriented framework using device behavioral fingerprinting to detect anomalies produced by SSDF attacks affecting resource-constrained spectrum sensors. CyberSpec has been implemented and validated in ElectroSense, a real crowdsensing RF monitoring platform where several configurations of the proposed SSDF attacks have been executed in different sensors. A pool of experiments with different unsupervised ML/DL-based models has demonstrated the suitability of CyberSpec detecting the previous attacks within an acceptable timeframe.

cs.CR↗

arXiv2021

Robust Federated Learning for execution time-based device model identification under label-flipping attack

The computing device deployment explosion experienced in recent years, motivated by the advances of technologies such as Internet-of-Things (IoT) and 5G, has led to a global scenario with increasing cybersecurity risks and threats. Among them, device spoofing and impersonation cyberattacks stand out due to their impact and, usually, low complexity required to be launched. To solve this issue, several solutions have emerged to identify device models and types based on the combination of behavioral fingerprinting and Machine/Deep Learning (ML/DL) techniques. However, these solutions are not appropriated for scenarios where data privacy and protection is a must, as they require data centralization for processing. In this context, newer approaches such as Federated Learning (FL) have not been fully explored yet, especially when malicious clients are present in the scenario setup. The present work analyzes and compares the device model identification performance of a centralized DL model with an FL one while using execution time-based events. For experimental purposes, a dataset containing execution-time features of 55 Raspberry Pis belonging to four different models has been collected and published. Using this dataset, the proposed solution achieved 0.9999 accuracy in both setups, centralized and federated, showing no performance decrease while preserving data privacy. Later, the impact of a label-flipping attack during the federated model training is evaluated, using several aggregation mechanisms as countermeasure. Zeno and coordinate-wise median aggregation show the best performance, although their performance greatly degrades when the percentage of fully malicious clients (all training samples poisoned) grows over 50%.

cs.CR↗

arXiv2021

Federated Learning for Malware Detection in IoT Devices

This work investigates the possibilities enabled by federated learning concerning IoT malware detection and studies security issues inherent to this new learning paradigm. In this context, a framework that uses federated learning to detect malware affecting IoT devices is presented. N-BaIoT, a dataset modeling network traffic of several real IoT devices while affected by malware, has been used to evaluate the proposed framework. Both supervised and unsupervised federated models (multi-layer perceptron and autoencoder) able to detect malware affecting seen and unseen IoT devices of N-BaIoT have been trained and evaluated. Furthermore, their performance has been compared to two traditional approaches. The first one lets each participant locally train a model using only its own data, while the second consists of making the participants share their data with a central entity in charge of training a global model. This comparison has shown that the use of more diverse and large data, as done in the federated and centralized methods, has a considerable positive impact on the model performance. Besides, the federated models, while preserving the participant's privacy, show similar results as the centralized ones. As an additional contribution and to measure the robustness of the federated approach, an adversarial setup with several malicious participants poisoning the federated model has been considered. The baseline model aggregation averaging step used in most federated learning algorithms appears highly vulnerable to different attacks, even with a single adversary. The performance of other model aggregation functions acting as countermeasures is thus evaluated under the same attack scenarios. These functions provide a significant improvement against malicious participants, but more efforts are still needed to make federated approaches robust.

cs.CR↗

arXiv2021

5G System Security Analysis

Fifth generation mobile networks (5G) are currently being deployed by mobile operators around the globe. 5G acts as an enabler for various use cases and also improves the security and privacy over 4G and previous network generations. However, as recent security research has revealed, the standard still has security weaknesses that may be exploitable by attackers. In addition, the migration from 4G to 5G systems is taking place by first deploying 5G solutions in a non-standalone (NSA) manner where the first step of the 5G deployment is restricted to the new radio aspects of 5G, while the control of the user equipment is still based on 4G protocols, i.e. the core network is still the legacy 4G evolved packet core (EPC) network. As a result, many security vulnerabilities of 4G networks are still present in current 5G deployments. This paper presents a systematic risk analysis of standalone and non-standalone 5G networks. We first describe an overview of the 5G system specification and the new security features of 5G compared to 4G. Then, we define possible threats according to the STRIDE threat classification model and derive a risk matrix based on the likelihood and impact of 12 threat scenarios that affect the radio access and the network core. Finally, we discuss possible mitigations and security controls. Our analysis is generic and does not account for the specifics of particular 5G network vendors or operators. Further work is required to understand the security vulnerabilities and risks of specific 5G implementations and deployments.

cs.NI↗

arXiv2021

SafeAMC: Adversarial training for robust modulation recognition models

In communication systems, there are many tasks, like modulation recognition, which rely on Deep Neural Networks (DNNs) models. However, these models have been shown to be susceptible to adversarial perturbations, namely imperceptible additive noise crafted to induce misclassification. This raises questions about the security but also the general trust in model predictions. We propose to use adversarial training, which consists of fine-tuning the model with adversarial perturbations, to increase the robustness of automatic modulation recognition (AMC) models. We show that current state-of-the-art models benefit from adversarial training, which mitigates the robustness issues for some families of modulations. We use adversarial perturbations to visualize the features learned, and we found that in robust models the signal symbols are shifted towards the nearest classes in constellation space, like maximum likelihood methods. This confirms that robust models not only are more secure, but also more interpretable, building their decisions on signal statistics that are relevant to modulation recognition.

eess.SP↗

arXiv2021

On the benefits of robust models in modulation recognition

Given the rapid changes in telecommunication systems and their higher dependence on artificial intelligence, it is increasingly important to have models that can perform well under different, possibly adverse, conditions. Deep Neural Networks (DNNs) using convolutional layers are state-of-the-art in many tasks in communications. However, in other domains, like image classification, DNNs have been shown to be vulnerable to adversarial perturbations, which consist of imperceptible crafted noise that when added to the data fools the model into misclassification. This puts into question the security of DNNs in communication tasks, and in particular in modulation recognition. We propose a novel framework to test the robustness of current state-of-the-art models where the adversarial perturbation strength is dependent on the signal strength and measured with the "signal to perturbation ratio" (SPR). We show that current state-of-the-art models are susceptible to these perturbations. In contrast to current research on the topic of image classification, modulation recognition allows us to have easily accessible insights on the usefulness of the features learned by DNNs by looking at the constellation space. When analyzing these vulnerable models we found that adversarial perturbations do not shift the symbols towards the nearest classes in constellation space. This shows that DNNs do not base their decisions on signal statistics that are important for the Bayes-optimal modulation recognition model, but spurious correlations in the training data. Our feature analysis and proposed framework can help in the task of finding better models for communication systems.

eess.SP↗

arXiv2021

A Survey on Device Behavior Fingerprinting: Data Sources, Techniques, Application Scenarios, and Datasets

In the current network-based computing world, where the number of interconnected devices grows exponentially, their diversity, malfunctions, and cybersecurity threats are increasing at the same rate. To guarantee the correct functioning and performance of novel environments such as Smart Cities, Industry 4.0, or crowdsensing, it is crucial to identify the capabilities of their devices (e.g., sensors, actuators) and detect potential misbehavior that may arise due to cyberattacks, system faults, or misconfigurations. With this goal in mind, a promising research field emerged focusing on creating and managing fingerprints that model the behavior of both the device actions and its components. The article at hand studies the recent growth of the device behavior fingerprinting field in terms of application scenarios, behavioral sources, and processing and evaluation techniques. First, it performs a comprehensive review of the device types, behavioral data, and processing and evaluation techniques used by the most recent and representative research works dealing with two major scenarios: device identification and device misbehavior detection. After that, each work is deeply analyzed and compared, emphasizing its characteristics, advantages, and limitations. This article also provides researchers with a review of the most relevant characteristics of existing datasets as most of the novel processing techniques are based on machine learning and deep learning. Finally, it studies the evolution of these two scenarios in recent years, providing lessons learned, current trends, and future research challenges to guide new solutions in the area.

cs.CR↗