arXiv subjects

Gérard Zins

Publications and source records attributed to Gérard Zins.

9 recordsLinked to original sources

arXiv2024

The VLT/ERIS vortex coronagraph: design, pointing control, and on-sky performance

The Enhanced Resolution Imager and Spectrograph (ERIS) is the new near-infrared instrument at the VLT-UT4. ERIS replaces and extends the observational capabilities formerly provided by SINFONI and NACO: integral field spectroscopy at 1 - 2.5 $μ$m, imaging at 1 - 5 $μ$m with several options for high-contrast imaging, and long-slit spectroscopy. In particular, a vortex coronagraph is now available for high contrast observations at L and M band. It is implemented using annular groove (or vortex) phase masks (one for each of the L and M bands) in a focal plane, and a Lyot stop in a downstream pupil plane. The vortex coronagraph has a discovery space starting already at $\sim$1$λ/D$, and works well in broadbands. However, to reach its optimal performance, it is critical to correct for slow pointing errors onto the vortex phase mask, which mandates a dedicated pointing control strategy. To do so, a control loop based on the QACITS algorithm has been developed and commissioned for ERIS. Good pointing stability is now regularly achieved with errors between 0.01 and 0.02 $λ/D$ and a correction rate of 0.2 Hz. In this contribution, we first review the design of the ERIS vortex coronagraph. We then detail the implementation of the QACITS algorithm describing the entire observing sequence, including the calibration steps, the initial centering, and the stabilization during the observing template. We then discuss performance based on commissioning data in terms of pointing accuracy and stability. Finally, we present post-processed contrast curves obtained during commissioning and compare them with NACO vortex data, showing a significant improvement of about 1 mag at all separations.

astro-ph.IM↗

arXiv2020

Infrared wavefront sensing for adaptive optics assisted Galactic Center observations with the VLT interferometer and GRAVITY: operation and results

This article describes the operation of the near-infrared wavefront sensing based Adaptive Optics (AO) system CIAO. The Coudé Infrared Adaptive Optics (CIAO) system is a central auxiliary component of the Very Large Telescope (VLT) interferometer (VLTI). It enables in particular the observations of the Galactic Center (GC) using the GRAVITY instrument. GRAVITY is a highly specialized beam combiner, a device that coherently combines the light of the four 8-m telescopes and finally records interferometric measurements in the K-band on 6 baselines simultaneously. CIAO compensates for phase disturbances caused by atmospheric turbulence, which all four 8 m Unit Telescopes (UT) experience during observation. Each of the four CIAO units generates an almost diffraction-limited image quality at its UT, which ensures that maximum flux of the observed stellar object enters the fibers of the GRAVITY beam combiner. We present CIAO performance data obtained in the first 3 years of operation as a function of weather conditions. We describe how CIAO is configured and used for observations with GRAVITY. In addition, we focus on the outstanding features of the near-infrared sensitive Saphira detector, which is used for the first time on Paranal, and show how it works as a wavefront sensor detector.

astro-ph.IM↗

arXiv2014

The VLTI / PIONIER near-infrared interferometric survey of southern T Tauri stars. I. First results

Context : The properties of the inner disks of bright Herbig AeBe stars have been studied with near infrared (NIR) interferometry and high resolution spectroscopy. The continuum and a few molecular gas species have been studied close to the central star; however, sensitivity problems limit direct information about the inner disks of the fainter T Tauri stars. Aims : Our aim is to measure some of the properties of the inner regions of disks surrounding southern T Tauri stars. Methods : We performed a survey with the PIONIER recombiner instrument at H-band of 21 T Tauri stars. The baselines used ranged from 11 m to 129 m, corresponding to a maximum resolution of 3mas (0.45 au at 150 pc). Results : Thirteen disks are resolved well and the visibility curves are fully sampled as a function of baseline in the range 45-130 m for these 13 objects. A simple qualitative examination of visibility profiles allows us to identify a rapid drop-off in the visibilities at short baselines in 8 resolved disks. This is indicative of a significant contribution from an extended contribution of light from the disk. We demonstrate that this component is compatible with scattered light, providing strong support to a prediction made by Pinte et al. (2008). The amplitude of the drop-off and the amount of dust thermal emission changes from source to source suggesting that each disk is different. A by-product of the survey is the identification of a new milli-arcsec separation binary: WW Cha. Spectroscopic and interferometric data of AK Sco have also been fitted with a binary and disk model. Conclusions : Visibility data are reproduced well when thermal emission and scattering form dust are fully considered. The inner radii measured are consistent with the expected dust sublimation radii. Modelling of AK Sco suggests a likely coplanarity between the disk and the binary's orbital plane

astro-ph.SR↗

arXiv2012

Image quality and high contrast improvements on VLT/NACO

NACO is the famous and versatile diffraction limited NIR imager and spectrograph with which ESO celebrated 10 years of Adaptive Optics at the VLT. Since two years a substantial effort has been put in to understanding and fixing issues that directly affect the image quality and the high contrast performances of the instrument. Experiments to compensate the non-common-path aberrations and recover the highest possible Strehl ratios have been carried out successfully and a plan is hereafter described to perform such measurements regularly. The drift associated to pupil tracking since 2007 was fixed in October 2011. NACO is therefore even better suited for high contrast imaging and can be used with coronagraphic masks in the image plane. Some contrast measurements are shown and discussed. The work accomplished on NACO will serve as reference for the next generation instruments on the VLT, especially those working at the diffraction limit and making use of angular differential imaging (i.e. SPHERE, VISIR, possibly ERIS).

astro-ph.IM↗

arXiv2011

Searching for faint companions with VLTI/PIONIER. I. Method and first results

Context. A new four-telescope interferometric instrument called PIONIER has recently been installed at VLTI. It provides improved imaging capabilities together with high precision. Aims. We search for low-mass companions around a few bright stars using different strategies, and determine the dynamic range currently reachable with PIONIER. Methods. Our method is based on the closure phase, which is the most robust interferometric quantity when searching for faint companions. We computed the chi^2 goodness of fit for a series of binary star models at different positions and with various flux ratios. The resulting chi^2 cube was used to identify the best-fit binary model and evaluate its significance, or to determine upper limits on the companion flux in case of non detections. Results. No companion is found around Fomalhaut, tau Cet and Regulus. The median upper limits at 3 sigma on the companion flux ratio are respectively of 2.3e-3 (in 4 h), 3.5e-3 (in 3 h) and 5.4e-3 (in 1.5 h) on the search region extending from 5 to 100 mas. Our observations confirm that the previously detected near-infrared excess emissions around Fomalhaut and tau Cet are not related to a low-mass companion, and instead come from an extended source such as an exozodiacal disk. In the case of del Aqr, in 30 min of observation, we obtain the first direct detection of a previously known companion, at an angular distance of about 40 mas and with a flux ratio of 2.05e-2 \pm 0.16e-2. Due to the limited u,v plane coverage, its position can, however, not be unambiguously determined. Conclusions. After only a few months of operation, PIONIER has already achieved one of the best dynamic ranges world-wide for multi-aperture interferometers. A dynamic range up to about 1:500 is demonstrated, but significant improvements are still required to reach the ultimate goal of directly detecting hot giant extrasolar planets.

astro-ph.EP↗

arXiv2010

FFREE: a Fresnel-FRee Experiment for EPICS, the EELT planets imager

The purpose of FFREE - the new optical bench devoted to experiments on high-contrast imaging at LAOG - consists in the validation of algorithms based on off-line calibration techniques and adaptive optics (AO) respectively for the wavefront measurement and its compensation. The aim is the rejection of the static speckles pattern arising in a focal plane after a diffraction suppression system (based on apodization or coronagraphy) by wavefront pre-compensation. To this aim, FFREE has been optimized to minimize Fresnel propagation over a large near infrared (NIR) bandwidth in a way allowing efficient rejection up to the AO control radius, it stands then as a demonstrator for the future implementation of the optics that will be common to the scientific instrumentation installed on EPICS.

physics.optics↗

arXiv2010

Status and new operation modes of the versatile VLT/NACO

This paper aims at giving an update on the most versatile adaptive optics fed instrument to date, the well known and successful NACO . Although NACO is only scheduled for about two more years at the Very Large Telescope (VLT), it keeps on evolving with additional operation modes bringing original astronomical results. The high contrast imaging community uses it creatively as a test-bench for SPHERE and other second generation planet imagers. A new visible wavefront sensor (WFS) optimized for Laser Guide Star (LGS) operations has been installed and tested, the cube mode is more and more requested for frame selection on bright sources, a seeing enhancer mode (no tip/tilt correction) is now offered to provide full sky coverage and welcome all kind of extragalactic applications, etc. The Instrument Operations Team (IOT) and Paranal engineers are currently working hard at maintaining the instrument overall performances but also at improving them and offering new capabilities, providing the community with a well tuned and original instrument for the remaining time it is being used. The present contribution delivers a non-exhaustive overview of the new modes and experiments that have been carried out in the past months.

astro-ph.IM↗

arXiv2010

The third version of the AMBER data reduction software

We present the third release of the AMBER data reduction software by the JMMC. This software is based on core algorithms optimized after several years of operation. An optional graphic interface in a high level language allows the user to control the process step by step or in a completely automatic manner. Ongoing improvement is the implementation of a robust calibration scheme, making use of the full calibration sets available during the night. The output products are standard OI-FITS files, which can be used directly in high level software like model fitting or image reconstruction tools. The software performances are illustrated on a full data set of calibrators observed with AMBER during 5 years taken in various instrumental setup.

astro-ph.IM↗

arXiv2007

AMBER on the VLTI: data processing and calibration issues

We present here the current performances of the AMBER / VLTI instrument for standard use and compare these with the offered modes of the instrument. We show that the instrument is able to reach its specified precision only for medium and high spectral resolution modes, differential observables and bright objects. For absolute observables, the current achievable accuracy is strongly limited by the vibrations of the Unit Telescopes, and also by the observing procedure which does not take into account the night-long transfer function monitoring. For low-resolution mode, the current limitation is more in the data reduction side, since several effects negligible at medium spectral resolution are not taken into account in the current pipeline. Finally, for faint objects (SNR around 1 per spectral channel), electromagnetic interferences in the VLTI interferometric laboratory with the detector electronics prevents currently to get unbiased measurements. Ideas are under study to correct in the data processing side this effect, but a hardware fix should be investigated seriously since it limits seriously the effective limiting magnitude of the instrument.

astro-ph↗