Searcharxiv⌕ Search

arXiv subjects

G. A. Steele

Publications and source records attributed to G. A. Steele.

29 records · Page 2Linked to original sources

Pick-up and drop transfer of diamond nanosheets

Nanocrystalline diamond (NCD) is a promising material for electronic and mechanical micro- and nanodevices. Here we introduce a versatile pick-up and drop technique that makes it possible to investigate the electrical, optical and mechanical properties of as-grown NCD films. Using this technique, NCD nanosheets, as thin as 55 nm, can be picked-up from a growth substrate and positioned on another substrate. As a proof of concept, electronic devices and mechanical resonators are fabricated and their properties are characterized. In addition, the versatility of the method is further explored by transferring NCD nanosheets onto an optical fibre, which allows measuring its optical absorption. Finally, we show that NCD nanosheets can also be transferred onto 2D crystals, such as MoS2, to fabricate heterostructures. Pick-up and drop transfer enables the fabrication of a variety of NCD-based devices without requiring lithography or wet processing.

cond-mat.mtrl-sci↗

Time-domain response of atomically thin $\mathrm{MoS_2}$ nanomechanical resonators

We measure the energy relaxation rate of single- and few-layer molybdenum disulphide ($\mathrm{MoS_2}$) nanomechanical resonators by detecting the resonator ring-down. Recent experiments on these devices show a remarkably low quality (Q)-factor when taking spectrum measurements at room temperature. The origin of the low spectral Q-factor is an open question, and it has been proposed that besides dissipative processes, frequency fluctuations contribute significantly to the resonance line-width. The spectral measurements performed thus far however, do not allow one to distinguish these two processes. Here, we use time-domain measurements to quantify the dissipation. We compare the Q-factor obtained from the ring-down measurements to those obtained from the thermal noise spectrum and from the frequency response of the driven device. In few-layer and single-layer $\mathrm{MoS_2}$ resonators the two are in close agreement, which demonstrates that the spectral line-width in $\mathrm{MoS_2}$ membranes at room temperature is limited by dissipation, and that excess spectral broadening plays a negligible role.

cond-mat.mes-hall↗

Submicrosecond-timescale readout of carbon nanotube mechanical motion

We report fast readout of the motion of a carbon nanotube mechanical resonator. A close-proximity high electron mobility transistor amplifier is used to increase the bandwidth of the measurement of nanotube displacements from the kHz to the MHz regime. Using an electrical detection scheme with the nanotube acting as a mixer, we detect the amplitude of its mechanical motion at room temperature with an intermediate frequency of 6 MHz and a timeconstant of 780 ns, both up to five orders of magnitude faster than achieved before. The transient response of the mechanical motion indicates a ring-down time faster than our enhanced time resolution, placing an upper bound on the contribution of energy relaxation processes to the room temperature mechanical quality factor.

cond-mat.mes-hall↗

Large spin-orbit coupling in carbon nanotubes

It has recently been recognized that the strong spin-orbit interaction present in solids can lead to new phenomena, such as materials with non-trivial topological order. Although the atomic spin-orbit coupling in carbon is weak, the spin-orbit coupling in carbon nanotubes can be significant due to their curved surface. Previous works have reported spin-orbit couplings in reasonable agreement with theory, and this coupling strength has formed the basis of a large number of theoretical proposals. Here we report a spin-orbit coupling in three carbon nanotube devices that is an order of magnitude larger than measured before. We find a zero-field spin splitting of up to 3.4 meV, corresponding to a built-in effective magnetic field of 29 T aligned along the nanotube axis. While the origin of the large spin-orbit coupling is not explained by existing theories, its strength is promising for applications of the spin-orbit interaction in carbon nanotubes devices.

cond-mat.mes-hall↗

Coupling carbon nanotube mechanics to a superconducting circuit

The quantum behaviour of mechanical resonators is a new and emerging field driven by recent experiments reaching the quantum ground state. The high frequency, small mass, and large quality-factor of carbon nanotube resonators make them attractive for quantum nanomechanical applications. A common element in experiments achieving the resonator ground state is a second quantum system, such as coherent photons or superconducting device, coupled to the resonators motion. For nanotubes, however, this is a challenge due to their small size. Here, we couple a carbon nanoelectromechanical (NEMS) device to a superconducting circuit. Suspended carbon nanotubes act as both superconducting junctions and moving elements in a Superconducting Quantum Interference Device (SQUID). We observe a strong modulation of the flux through the SQUID from displacements of the nanotube. Incorporating this SQUID into superconducting resonators and qubits should enable the detection and manipulation of nanotube mechanical quantum states at the single-phonon level.

cond-mat.mes-hall↗

Single electron tunneling through high-Q single-wall carbon nanotube NEMS resonators

By first lithographically fabricating contact electrodes and then as last step growing carbon nanotubes with chemical vapour deposition across the ready-made chip, many potential contamination mechanisms for nanotube devices can be avoided. Combining this with pre-defined trenches on the chip, such that the nanotubes are freely suspended above the substrate, enables the formation of highly regular electronic systems. We show that, in addition, such suspended ultra-clean nanotubes provide excellent high-frequency and low-dissipation mechanical resonators. The motion detection mechanism of our experiment is discussed, and we measure the effect of Coulomb blockade and the back-action of single electron tunneling on the mechanical motion. In addition data on the mechanical higher modes is presented.

cond-mat.mes-hall↗

Strong coupling between single-electron tunneling and nano-mechanical motion

Nanoscale resonators that oscillate at high frequencies are useful in many measurement applications. We studied a high-quality mechanical resonator made from a suspended carbon nanotube driven into motion by applying a periodic radio frequency potential using a nearby antenna. Single-electron charge fluctuations created periodic modulations of the mechanical resonance frequency. A quality factor exceeding 10^5 allows the detection of a shift in resonance frequency caused by the addition of a single-electron charge on the nanotube. Additional evidence for the strong coupling of mechanical motion and electron tunneling is provided by an energy transfer to the electrons causing mechanical damping and unusual nonlinear behavior. We also discovered that a direct current through the nanotube spontaneously drives the mechanical resonator, exerting a force that is coherent with the high-frequency resonant mechanical motion.

cond-mat.mes-hall↗

Carbon nanotubes as ultra-high quality factor mechanical resonators

We have observed the transversal vibration mode of suspended carbon nanotubes at millikelvin temperatures by measuring the single-electron tunneling current. The suspended nanotubes are actuated contact-free by the radio frequency electric field of a nearby antenna; the mechanical resonance is detected in the time-averaged current through the nanotube. Sharp, gate-tuneable resonances due to the bending mode of the nanotube are observed, combining resonance frequencies of up to ν_0 = 350 MHz with quality factors above Q = 10^5, much higher than previously reported results on suspended carbon nanotube resonators. The measured magnitude and temperature dependence of the Q-factor shows a remarkable agreement with the intrinsic damping predicted for a suspended carbon nanotube. By adjusting the RF power on the antenna, we find that the nanotube resonator can easily be driven into the non-linear regime.

cond-mat.mes-hall↗

Tunable few-electron double quantum dots and Klein tunnelling in ultra-clean carbon nanotubes

Quantum dots defined in carbon nanotubes are a platform for both basic scientific studies and research into new device applications. In particular, they have unique properties that make them attractive for studying the coherent properties of single electron spins. To perform such experiments it is necessary to confine a single electron in a quantum dot with highly tunable barriers, but disorder has until now prevented tunable nanotube-based quantum-dot devices from reaching the single-electron regime. Here, we use local gate voltages applied to an ultra-clean suspended nanotube to confine a single electron in both a single quantum dot and, for the first time, in a tunable double quantum dot. This tunability is limited by a novel type of tunnelling that is analogous to that in the Klein paradox of relativistic quantum mechanics.

cond-mat.mes-hall↗

Real Time Electron Tunneling and Pulse Spectroscopy in Carbon Nanotube Quantum Dots

We investigate a Quantum Dot (QD) in a Carbon Nanotube (CNT) in the regime where the QD is nearly isolated from the leads. An aluminum single electron transistor (SET) serves as a charge detector for the QD. We precisely measure and tune the tunnel rates into the QD in the range between 1 kHz and 1 Hz, using both pulse spectroscopy and real - time charge detection and measure the excitation spectrum of the isolated QD.

cond-mat.mes-hall↗

Imaging Transport Resonances in the Quantum Hall Effect

We use a scanning capacitance probe to image transport in the quantum Hall system. Applying a DC bias voltage to the tip induces a ring-shaped incompressible strip (IS) in the 2D electron system (2DES) that moves with the tip. At certain tip positions, short-range disorder in the 2DES creates a quantum dot island in the IS. These islands enable resonant tunneling across the IS, enhancing its conductance by more than four orders of magnitude. The images provide a quantitative measure of disorder and suggest resonant tunneling as the primary mechanism for transport across ISs.

cond-mat.mes-hall↗