arXiv subjects

G. A. de Wijs

Publications and source records attributed to G. A. de Wijs.

At least 19 recordsLinked to original sources

arXiv2025

NMR chemical shielding for solid-state systems using spin-orbit coupled ZORA GIPAW

We present an implementation of spin-orbit coupling (SOC) for the computation of nuclear magnetic resonance (NMR) chemical shielding tensors within linear response theory. Our implementation in the Vienna {\it Ab initio} Simulation Package (VASP) is tailored to solid-state systems by employing periodic boundary conditions and the gauge-including projector augmented waves (GIPAW) approach. Relativistic effects are included on the level of the zeroth-order regular approximation (ZORA). We discuss the challenges posed by the PAW partial wave basis in describing SOC regarding chemical shielding tensors. Our method is in good agreement with existing local-basis ZORA implementations for a series of Sn, Hg, and Pb molecules and cluster approximations for crystalline systems.

cond-mat.mtrl-sci↗

arXiv2017

Theoretical models of Rashba spin splitting in asymmetric SrTiO3-based heterostructures

Rashba spin splitting in two-dimensional (2D) semiconductor systems is generally calculated in a ${\bf k} \cdot {\bf p}$ Luttinger-Kohn approach where the spin splitting due to asymmetry emerges naturally from the bulk band structure. In recent years, several new classes of 2D systems have been discovered where electronic correlations are believed to have an important role. In these correlated systems, the effects of asymmetry leading to Rashba splitting have typically been treated phenomenologically. We compare these two approaches for the case of 2D electron systems in SrTiO$_3$-based heterostructures, and find that the two models produce fundamentally different behavior in regions of the Brillouin zone that are particularly relevant for magnetotransport. Our results demonstrate the importance of identifying the correct approach in the quantitative interpretation of experimental data, and are likely to be relevant to a range of 2D systems in correlated materials.

cond-mat.mes-hall↗

arXiv2016

Band offsets at the crystalline/amorphous silicon interface from first-principles

The band offsets between crystalline and hydrogenated amorphous silicon (a-Si:H) are key parameters governing the charge transport in modern silicon hetrojunction solar cells. They are an important input for macroscopic simulators that are used to further optimize the solar cell. Past experimental studies, using X-ray photoelectron spectroscopy (XPS) and capacitance-voltage measurements, have yielded conflicting results on the band offset. Here we present a computational study on the band offsets. It is based on atomistic models and density-functional theory (DFT). The amorphous part of the interface is obtained by relatively long DFT first-principles molecular-dynamics (MD) runs at an elevated temperature on 30 statistically independent samples. In order to obtain a realistic conduction band position the electronic structure of the interface is calculated with a hybrid functional. We find a slight asymmetry in the band offsets, where the offset in the valence band (0.30 eV) is larger than in the conduction band (0.17 eV). Our results are in agreement with the latest XPS measurements that report a valence band offset of 0.3 eV [M. Liebhaber et al., Appl. Phys. Lett. 106, 031601 (2015)].

cond-mat.mtrl-sci↗

arXiv2016

NMR shieldings from density functional perturbation theory: GIPAW versus all-electron calculations

We present a benchmark of the density functional linear response calculation of NMR shieldings within the Gauge-Including Projector-Augmented-Wave method against all-electron Augmented-Plane-Wave$+$local-orbital and uncontracted Gaussian basis set results for NMR shieldings in molecular and solid state systems. In general, excellent agreement between the aforementioned methods is obtained. Scalar relativistic effects are shown to be quite large for nuclei in molecules in the deshielded limit. The small component makes up a substantial part of the relativistic corrections.

cond-mat.mtrl-sci↗

arXiv2015

Geometric, electronic and magnetic structure of Fe$_{x}$O$_{y}^{+}$ clusters

Correlation between geometry, electronic structure and magnetism of solids is both intriguing and elusive. This is particularly strongly manifested in small clusters, where a vast number of unusual structures appear. Here, we employ density functional theory in combination with a genetic search algorithm, GGA$+U$ and a hybrid functional to determine the structure of gas phase Fe$_{x}$O$_{y}^{+/0}$ clusters. For Fe$_{x}$O$_{y}$ cation clusters we also calculate the corresponding vibration spectra and compare them with experiments. We successfully identify Fe$_{3}$O$_{4}^{+}$, Fe$_{4}$O$_{5}^{+}$, Fe$_{4}$O$_{6}^{+}$, Fe$_{5}$O$_{7}^{+}$ and propose structures for Fe$_{6}$O$_{8}^{+}$. Within the triangular geometric structure of Fe$_{3}$O$_{4}^{+}$ a non-collinear, ferrimagnetic and ferromagnetic state are comparable in energy. Fe$_{4}$O$_{5}^{+}$ and Fe$_{4}$O$_{6}^{+}$ are ferrimagnetic with a residual magnetic moment of 1~\muB{} due to ionization. Fe$_{5}$O$_{7}^{+}$ is ferrimagnetic due to the odd number of Fe atoms. We compare the electronic structure with bulk magnetite and find Fe$_{4}$O$_{5}^{+}$, Fe$_{4}$O$_{6}^{+}$, Fe$_{6}$O$_{8}^{+}$ to be mixed valence clusters. In contrast, in Fe$_{3}$O$_{4}^{+}$ and Fe$_{5}$O$_{7}^{+}$ all Fe are found to be trivalent.

physics.atm-clus↗

arXiv2014

Li intercalation in graphite: a van der Waals density-functional study

Modeling layered intercalation compounds from first principles poses a problem, as many of their properties are determined by a subtle balance between van der Waals interactions and chemical or Madelung terms, and a good description of van der Waals interactions is often lacking. Using van der Waals density functionals we study the structures, phonons and energetics of the archetype layered intercalation compound Li-graphite. Intercalation of Li in graphite leads to stable systems with calculated intercalation energies of $-0.2$ to $-0.3$~eV/Li atom, (referred to bulk graphite and Li metal). The fully loaded stage 1 and stage 2 compounds LiC$_6$ and Li$_{1/2}$C$_6$ are stable, corresponding to two-dimensional $\sqrt3\times\sqrt3$ lattices of Li atoms intercalated between two graphene planes. Stage $N>2$ structures are unstable compared to dilute stage 2 compounds with the same concentration. At elevated temperatures dilute stage 2 compounds easily become disordered, but the structure of Li$_{3/16}$C$_6$ is relatively stable, corresponding to a $\sqrt7\times\sqrt7$ in-plane packing of Li atoms. First-principles calculations, along with a Bethe-Peierls model of finite temperature effects, allow for a microscopic description of the observed voltage profiles.

cond-mat.mtrl-sci↗

arXiv2014

Interactions of adsorbed CO$_2$ on water ice at low temperatures

We present a computational study into the adsorption properties of CO$_2$ on amorphous and crystalline water surfaces under astrophysically relevant conditions. Water and carbon dioxide are two of the most dominant species in the icy mantles of interstellar dust grains and a thorough understanding of their solid phase interactions at low temperatures is crucial for understanding the structural evolution of the ices due to thermal segregation. In this paper, a new H$_2$O-CO$_2$ interaction potential is proposed and used to model the ballistic deposition of CO$_2$ layers on water ice surfaces, and to study the individual binding sites at low coverages. Contrary to recent experimental results, we do not observe CO$_2$ island formation on any type of water substrate. Additionally, density functional theory calculations are performed to assess the importance of induced electrostatic interactions.

astro-ph.GA↗

arXiv2014

k.p subband structure of the LaAlO3/SrTiO3 interface

Heterostructures made of transition metal oxides are new tailor-made materials which are attracting much attention. We have constructed a 6-band k.p Hamiltonian and used it within the envelope function method to calculate the subband structure of a variety of LaAlO3/SrTiO3 heterostructures. By use of density functional calculations, we determine the k.p parameters describing the conduction band edge of SrTiO3: the three effective mass parameters, L=0.6104 eV AA^2, M=9.73 eV AA^2, N=-1.616 eV AA^2, the spin orbit splitting Delta_SO=28.5 meV and the low temperature tetragonal distortion energy splitting Delta_T=2.1 meV. For confined systems we find strongly anisotropic non-parabolic subbands. As an application we calculate bands, density of states and magnetic energy levels and compare the results to Shubnikov-de Haas quantum oscillations observed in high magnetic fields. For typical heterostructures we find that electric field strength at the interface of F = 0.1 meV/AA for a carrier density of 7.2 10^{12} cm^-2 results in a subband structure that is similar to experimental results.

cond-mat.mes-hall↗

arXiv2012

Mixed Magnetism for Refrigeration and Energy Conversion

The efficient coupling between lattice degrees of freedom and spin degrees of freedom in magnetic materials can be used for refrigeration and energy conversion. This coupling is enhanced in materials exhibiting the giant magnetocaloric effect. First principle electronic structure calculations on hexagonal MnFe(P, Si) reveal a new form of magnetism: the coexistence of strong and weak magnetism in alternate atomic layers. The weak magnetism of Fe layers (disappearance of local magnetic moments at the Curie temperature) is responsible for a strong coupling with the crystal lattice while the strong magnetism in adjacent Mn-layers ensures Curie temperatures high enough to enable operation at and above room temperature. Varying the composition on these magnetic sublattices gives a handle to tune the working temperature and to achieve a strong reduction of the undesired thermal hysteresis. In this way we design novel materials based on abundantly available elements with properties matched to the requirements of an efficient refrigeration or energy-conversion cycle.

cond-mat.mtrl-sci↗

arXiv2008

First-principles study of the optical properties of MgxTi(1-x)H2

The optical and electronic properties of Mg-Ti hydrides are studied using first-principles density functional theory. Dielectric functions are calculated for MgxTi(1-x)H2 with compositions x = 0.5, 0.75, and 0.875. The structure is that of fluorite TiH2 where both Mg and Ti atoms reside at the Ti positions of the lattice. In order to assess the effect of randomness in the Mg and Ti occupations we consider both highly ordered structures, modeled with simple unit cells of minimal size, and models of random alloys. These are simulated by super cells containing up to 64 formula units (Z = 64). All compositions and structural models turn out metallic, hence the dielectric functions contain interband and intraband free electron contributions. The former are calculated in the independent particle random phase approximation. The latter are modeled based upon the intraband plasma frequencies, which are also calculated from first-principles. Only for the models of the random alloys we obtain a black state, i.e. low reflection and transmission in the energy range from 1 to 6 eV.

cond-mat.mtrl-sci↗

arXiv2007

Spin tunneling in junctions with disordered ferromagnets

We provide compelling evidence to establish that, contrary to one's elementary guess, the tunneling spin polarization (TSP) of amorphous CoFeB is larger than that of highly textured fcc CoFeB. First principles atomic and electronic structure calculations reveal striking agreement between the measured TSP and the predicted s-electron spin polarization. Given the disordered structure of the ternary alloy, not only do these results strongly endorse our communal understanding of tunneling through AlOx, but they also portray the key concepts that demand primary consideration in such complex systems.

cond-mat.mtrl-sci↗

arXiv2007

A first-principles study of the electronic structure and stability of Be(BH4)2

Alanates and boranates are studied intensively because of their potential use as hydrogen storage materials. In this paper we present a first-principles study of the electronic structure and the energetics of beryllium boranate, Be(BH4)2. From total energy calculations we show that - in contrast to the other boranates and alanates - hydrogen desorption directly to the elements is likely, and is at least competitive with desorption to the elemental hydride (BeH2). The formation enthalpy of Be(BH4)2 is only -0.12 eV/H2 (at T=0K). This low value can be rationalized by the participation of all atoms in the covalent bonding, in contrast to the ionic bonding observed in other boranates. From calculations of thermodynamic properties at finite temperature we estimate a decomposition temperature of 162 K at a pressure of 1 bar.

cond-mat.mtrl-sci↗

arXiv2007

Ab initio study on the effects of transition metal doping of Mg2NiH4

Mg2NiH4 is a promising hydrogen storage material with fast (de)hydrogenation kinetics. Its hydrogen desorption enthalpy, however, is too large for practical applications. In this paper we study the effects of transition metal doping by first-principles density functional theory calculations. We show that the hydrogen desorption enthalpy can be reduced by ~0.1 eV/H2 if one in eight Ni atoms is replaced by Cu or Fe. Replacing Ni by Co atoms, however, increases the hydrogen desorption enthalpy. We study the thermodynamic stability of the dopants in the hydrogenated and dehydrogenated phases. Doping with Co or Cu leads to marginally stable compounds, whereas doping with Fe leads to an unstable compound. The optical response of Mg2NiH4 is also substantially affected by doping. The optical gap in Mg2NiH4 is ~1.7 eV. Doping with Co, Fe or Cu leads to impurity bands that reduce the optical gap by up to 0.5 eV.

cond-mat.mtrl-sci↗

arXiv2006

A model for the formation energies of alanates and boranates

We develop a simple model for the formation energies (FEs) of alkali and lkaline earth alanates and boranates, based upon ionic bonding between metal cations and (AlH4)- or (BH4)- anions. The FEs agree well with values obtained from first principles calculations and with experimental FEs. The model shows that details of the crystal structure are relatively unimportant. The small size of the (BH4)- anion causes a strong bonding in the crystal, which makes boranates more stable than alanates. Smaller alkali or alkaline earth cations do not give an increased FE. They involve a larger ionization potential that compensates for the increased crystal bonding.

cond-mat.mtrl-sci↗

arXiv2006

Electronic structure and optical properties of lightweight metal hydrides

We study the electronic structures and dielectric functions of the simple hydrides LiH, NaH, MgH2 and AlH3, and the complex hydrides Li3AlH6, Na3AlH6, LiAlH4, NaAlH4 and Mg(AlH4)2, using first principles density functional theory and GW calculations. All these compounds are large gap insulators with GW single particle band gaps varying from 3.5 eV in AlH3 to 6.5 eV in the MAlH4 compounds. The valence bands are dominated by the hydrogen atoms, whereas the conduction bands have mixed contributions from the hydrogens and the metal cations. The electronic structure of the aluminium compounds is determined mainly by aluminium hydride complexes and their mutual interactions. Despite considerable differences between the band structures and the band gaps of the various compounds, their optical responses are qualitatively similar. In most of the spectra the optical absorption rises sharply above 6 eV and has a strong peak around 8 eV. The quantitative differences in the optical spectra are interpreted in terms of the structure and the electronic structure of the compounds.

cond-mat.mtrl-sci↗

arXiv2005

Interrelation of work function and surface stability: the case of BaAl4

The relationship between the work function (Phi) and the surface stability of compounds is, to our knowledge, unknown, but very important for applications such as organic light-emitting diodes. This relation is studied using first-principles calculations on various surfaces of BaAl4. The most stable surface [Ba terminated (001)] has the lowest Phi (1.95 eV), which is lower than that of any elemental metal including Ba. Adding barium to this surface neither increases its stability nor lowers its work function. BaAl4 is also strongly bound. These results run counter to the common perception that stability and a low Phi are incompatible. Furthermore, a large anisotropy and a stable low-work-function surface are predicted for intermetallic compounds with polar surfaces.

physics.comp-ph↗

arXiv2005

Ab initio study of magnesium alanate, Mg(AlH4)2

Magnesium alanate Mg(AlH4)2 has recently raised interest as a potential material for hydrogen storage. We apply ab initio calculations to characterize structural, electronic and energetic properties of Mg(AlH4)2. Density functional theory calculations within the generalized gradient approximation (GGA) are used to optimize the geometry and obtain the electronic structure. The latter is also studied by quasi-particle calculations at the GW level. Mg(AlH4)2 is a large band gap insulator with a fundamental band gap of 6.5 eV. The hydrogen atoms are bonded in AlH4 complexes, whose states dominate both the valence and the conduction bands. On the basis of total energies, the formation enthalpy of Mg(AlH4)2 with respect to bulk magnesium, bulk aluminum and hydrogen gas is 0.17 eV/H2 (at T = 0). Including corrections due to the zero point vibrations of the hydrogen atoms this number decreases to 0.10 eV/H2. The enthalpy of the dehydrogenation reaction Mg(AlH4)2 -> MgH2 +2Al+3H2(g) is close to zero, which impairs the potential usefulness of magnesium alanate as a hydrogen storage material.

cond-mat.mtrl-sci↗

arXiv2005

Tunable spin transport in CrAs: role of correlation effects

Correlation effects on the electronic structure of half-metallic CrAs in zinc-blende structure are studied for different substrate lattice constants. Depending on the substrate the spectral weight of the non-quasiparticle states might be tuned from a well developed value in the case of InAs substrate to an almost negligible contribution for the GaAs one. A piezoelectric material that would allow the change in the substrate lattice parameters opens the possibility for practical investigations of the switchable (tunable) non-quasiparticle states. Since the latter are important for the tunneling magnetoresistance and related phenomena it creates new opportunities in spintronics.

cond-mat.str-el↗