arXiv subjects

G. Bejarano

Publications and source records attributed to G. Bejarano.

6 recordsLinked to original sources

arXiv2024

MINLP-based hybrid strategy for operating mode selection of TES-backed-up refrigeration systems

This brief deals with the satisfaction of the daily cooling demand by a hybrid system that consists of a vapour-compression refrigeration cycle and a thermal energy storage (TES) unit, based on phase change materials. The addition of the TES tank to the original refrigeration plant allows to schedule the cooling production regardless of the instantaneous demand, given that the TES tank can store cold energy and release it whenever deemed appropriate. The scheduling problem is posed as an optimization problem based on mixed-integer non-linear programming (MINLP), since it includes both discrete and continuous variables. The latter corresponds to the references on the main cooling powers involved in the problem (cooling production at the evaporator and TES charging/discharging), whereas the discrete variables define the operating mode scheduling. Therefore, in addition to the hybrid features of the physical plant, a hybrid optimal control strategy is also proposed. A receding horizon approach is applied, similar to model predictive control (MPC) strategies, while economic criteria are imposed in the objective function, as well as feasibility issues. The TES state estimation is also addressed, since its instantaneous charge ratio is not measurable. The proposed strategy is applied in simulation to a challenging cooling demand profile and the main advantages of the MINLP-based strategy over a non-linear MPC-based scheduling strategy previously developed are highlighted, regarding operating cost, ease of tuning, and ability to adapt to cooling demand variations.

math.OC↗

arXiv2024

Novel scheme for a PCM-based cold energy storage system. Design, modelling, and simulation

This paper studies the design and dynamic modelling of a novel thermal energy storage (TES) system combined with a refrigeration system based on phase change materials (PCM). Cold-energy production supported by TES systems is a very appealing field of research, since it allows flexible cold-energy management, combining demand fulfilment with cost reduction strategies. The paper proposes and compares two different simulation models for a cold-energy storage system based on PCM. First, a continuous model is developed, the application of which is limited to decoupled charging/discharging operations. Given such conditions, it is a relatively precise model, useful for the tuning of the TES parameters. The second proposed model is a discrete one, which, despite implementing a discrete approximation of the system behaviour, allows to study more general conditions, such as series of partial charging/discharging operations. Simulation results of both models are compared regarding decoupled charging/discharging operations, and the ability of the discrete model to represent more realistic partial operations is analysed.

eess.SY↗

arXiv2024

Efficient simulation strategy for PCM-based cold-energy storage systems

This paper proposes a computationally efficient simulation strategy for cold thermal energy storage (TES) systems based on phase change material (PCM). Taking as a starting point the recent design of a TES system based on PCM, designed to complement a vapour-compression refrigeration plant, the new highly efficient modelling strategy is described and its performance is compared against the pre-existing one. The need for a new computationally efficient approach comes from the fact that, in the near future, such a TES model is intended to be used in combination with the model of the own mother refrigeration plant, in order to address efficient, long-term energy management strategies, where computation time will become a major issue. Comparative simulations show that the proposed computationally efficient strategy reduces the simulation time to a small fraction of the original figure (from around 1/30th till around 1/120th, depending on the particular choice of the main sampling interval), at the expense of affordable inaccuracy in terms of the PCM charge ratio.

eess.SY↗

arXiv2024

Modelling and cooling power control of a TES-backed-up vapour-compression refrigeration system

This work addresses the modelling, power control, and optimization of a thermal energy storage (TES) system combined with a vapour-compression refrigeration facility based on phase change materials (PCM). Given a novel design of a PCM-based TES tank and its interconnection with an existing refrigeration system, the joint dynamic modelling is first studied, exploring the different time scales that coexist at the interconnected system. Diverse operating modes are defined, according to the intended use of the TES tank as a cold-energy buffer to decouple cooling demand and production, whereas the static characteristic and power limits are calculated and show the high coupling between the main cooling powers involved (TES charging/discharging power, and direct power production at the evaporator). In this light, a decoupling control strategy is proposed, where the low-level controllers are simply PI regulators and the refrigerant/secondary mass flows are considered as virtual manipulated variables, applying a feedforward-based cascade strategy. The control performance is evaluated through a thorough simulation that includes all operating modes, where the reference tracking is shown to be fast and reliable enough to address high-level scheduling strategies, where the references on the main cooling powers are intended to be imposed considering economic and efficiency criteria.

eess.SY↗

arXiv2024

Optimal control analysis and Practical NMPC applied to refrigeration systems

This work is focused on optimal control of mechanical compression refrigeration systems. A reduced-order state-space model based on the moving boundary approach is proposed for the canonical cycle, which eases the controller design. The optimal cycle (that satisfying the cooling demand while maximizing efficiency) is defined by three variables, but only two inputs are available, therefore the controllability of the proposed model is studied. It is shown through optimization simulations how optimal cycles for a range of the cooling demand turn out not to be achieved by keeping the degree of superheating to a minimum. The Practical NMPC and a well-known feedback-plus-feedforward strategy from the literature are compared in simulation, both showing trouble in reaching the optimal cycle, which agrees with the controllability study.

math.OC↗

arXiv2024

Nonlinear model predictive control-based guidance law for path following of unmanned surface vehicles

This work proposes a nonlinear model predictive control-based guidance strategy for unmanned surface vehicles, focused on path following. The application of this strategy, in addition to overcome drawbacks of previous line-of-sight-based guidance laws, intends to enable the application of predictive strategies also to the low-level control, responsible for tracking the references provided by the guidance strategy. The stability and robustness of the proposed strategy are theoretically discussed. Furthermore, given the non-negligible computational cost of such nonlinear predictive guidance strategy, a practical nonlinear model predictive control strategy is also applied in order to reduce the computational cost to a great extent. The effectiveness and advantages of both proposed strategies over other nonlinear guidance laws are illustrated through a complete set of simulations.

eess.SY↗