SearcharxivSearch

arXiv subjects

G. Bimonte

Publications and source records attributed to G. Bimonte.

At least 19 recordsLinked to original sources

Enhancing Mortality Forecasting with Ensemble Learning: A Shapley-Based Approach

A well-established insight in mortality forecasting is that combining predictions from a set of models improves accuracy compared to relying on a single best model. This paper proposes a novel ensemble approach based on Shapley values, a game-theoretic measure of each model's marginal contribution to the forecast. We further compute these SHapley Additive exPlanations (SHAP)-based weights age-by-age, thereby capturing the specific contribution of each model at each age. In addition, we introduce a threshold mechanism that excludes models with negligible contributions, effectively reducing the forecast variance. Using data from 24 OECD countries, we demonstrate that our SHAP ensemble enhances out-of-sample forecasting performance, especially at longer horizons. By leveraging the complementary strengths of different mortality models and filtering out those that add little predictive power, our approach offers a robust and interpretable solution for improving mortality forecasts.

stat.AP

Surface Scattering Expansion of the Casimir-Polder Interaction for Magneto-dielectric Bodies: Convergence Properties for Insulators, Conductors and Semiconductors

Fluctuation induced forces are a hallmark of the interplay of fluctuations and geometry. We recently proved the existence of a multi-parametric family of exact representations of Casimir and Casimir-Polder interactions between bodies of arbitrary shape and material composition, admitting a multiple scattering expansion (MSE) as a sequence of inter- and intra-body multiple wave scatterings [G. Bimonte, T. Emig, Phys. Rev. A 108, 052807 (2023)]. The approach requires no knowledge of the scattering amplitude (T-matrix) of the bodies. Here we investigate the convergence properties of the MSE for the Casimir-Polder interaction of a polarizable particle with a macroscopic body. We consider representative materials from different classes, such as insulators, conductors and semiconductors. Using a sphere and a cylinder as benchmarks, we demonstrate that the MSE can be used to efficiently and accurately compute the Casimir-Polder interaction for bodies with smooth surfaces.

quant-ph

Thermal effect in the Casimir force for graphene and graphene-coated substrates: Impact of nonzero mass gap and chemical potential

The rigorous finite-temperature QED formalism of the polarization tensor is used to study the combined effect of nonzero mass gap $m$ and chemical potential $μ$ on the Casimir force and its thermal correction in the experimentally relevant configuration of a Au sphere interacting with a real graphene sheet or with graphene-coated dielectric substrates made of different materials. It is shown that for both a free-standing graphene sheet and for graphene-coated substrates the magnitude of the Casimir force decreases as $m$ is increased, while it increases as $μ$ is increased, indicating that these parameters act in opposite directions. According to our results, the impact of $m$ and/or $μ$ on the Casimir force for graphene-coated plates is much smaller than for a free-standing graphene sheet. Furthermore, computations show that the Casimir force is much stronger for graphene-coated substrates than for a free-standing graphene sample, but the thermal correction and its fractional weight in the total force are smaller in the former case. These results are applied to a differential setup that was recently proposed to observe the giant thermal effect in the Casimir force for graphene. We show that this experiment remains feasible even after taking into account the influence of the nonzero mass-gap and chemical potential of real graphene samples. Possible further applications of the obtained results are discussed.

cond-mat.other

How to observe the giant thermal effect in the Casimir force for graphene systems

A differential measurement scheme is proposed which allows for a clear observation of the giant thermal effect for the Casimir force, that was recently predicted to occur in graphene systems at short separation distances. The difference among the Casimir forces acting between a metal-coated sphere and the two halves of a dielectric plate, one uncoated and the other coated with graphene, is calculated in the framework of the Dirac model using the rigorous formalism of the polarization tensor. It is shown that in the proposed configuration both the difference among the Casimir forces and its thermal contributioncan be easily measured using already existing experimental setups. An observation of the giant thermal effect should open opportunities for modulation and control of dispersion forces in micromechanical systems based on graphene and other novel 2D-materials.

cond-mat.mes-hall

Universal experimental test for the role of free charge carriers in thermal Casimir effect within a micrometer separation range

We propose a universal experiment to measure the differential Casimir force between a Au-coated sphere and two halves of a structured plate covered with a P-doped Si overlayer. The concentration of free charge carriers in the overlayer is chosen slightly below the critical one, f or which the phase transition from dielectric to metal occurs. One ha f of the structured plate is insulating, while its second half is made of gold. For the former we consider two different structures, one consisting of bulk high-resistivity Si and the other of a layer of silica followed by bulk high-resistivity Si. The differential Casimir force is computed within the Lifshitz theory using four approaches that have been proposed in the literature to account for the role of free charge carriers in metallic and dielectric materials interacting with quantum fluctuations. According to these approaches, Au at low frequencies is described by either the Drude or the plasma model, whereas the free charge carriers in dielectric materials at room temperature are either taken into account or disregarded. It is shown that the values of differential Casimir forces, computed in the micrometer separation range using these four approaches, are widely distinct from each other and can be easily discriminated experimentally. It is shown that for all approaches the thermal component of the differential Casimir force is sufficiently large for direct observation. The possible errors and uncertainties in the proposed experiment are estimated and its importance for the theory of quantum fluctuations is discussed.

cond-mat.other

Non-equilibrium Fluctuational Quantum Electrodynamics: Heat Radiation, Heat Transfer, and Force

Quantum and thermal fluctuations of electromagnetic waves are the cornerstone of quantum and statistical physics, and inherent to such phenomena as thermal radiation and van der Waals forces. While the basic principles are the material of elementary texts, recent experimental and technological advances have made it necessary to come to terms with counterintuitive consequences of electromagnetic fluctuations at short scales -- in the so called {\it near-field} regime. We focus on three manifestations of such behavior: {\bf (i)} The Stefan--Boltzmann law describes thermal radiation from macroscopic bodies, but fails to account for magnitude, polarization and coherence of radiation from small objects (say compared to the skin depth). {\bf (ii)} The heat transfer between two bodies at similar close proximity is dominated by evanescent waves, and can be several orders of magnitude larger than the classical contribution due to propagating waves. {\bf (iii)} Casimir/van der Waals interactions are a dominant force between objects at sub-micron separation; the non-equilibrium analogs of this force (for objects at different temperatures) have not been sufficiently explored (at least experimentally). To explore these phenomena we introduce the tool of fluctuational quantum electrodynamics (QED) originally introduced by Rytov in the 1950s. Combined with a scattering formalism, this enables studies of heat radiation and transfer, equilibrium and non-equilibrium forces for objects of different material properties, shapes, separations and arrangements.

cond-mat.other

Isoelectronic determination of the thermal Casimir force

Differential force measurements between spheres coated with either nickel or gold and rotating disks with periodic distributions of nickel and gold are reported. The rotating samples are covered by a thin layer of titanium and a layer of gold. While titanium is used for fabrication purposes, the gold layer (nominal thicknesses of 21, 37, 47 and 87 nm) provides an isoelectronic environment, and is used to nullify the electrostatic contribution but allow the passage of long wavelength Casimir photons. A direct comparison between the experimental results and predictions from Drude and plasma models for the electrical permittivity is carried out. In the models the magnetic permeability of nickel is allowed to change to investigate its effects. Possible sources of errors, both in the experimental and theoretical sides, are taken into account. It is found that a Drude response with magnetic properties of nickel taken into account is unequivocally ruled out. The full analysis of the data indicates that a dielectric plasma response with magnetic properties of Ni included shows good agreement with the data. Neither a Drude nor a plasma dielectric response provide a satisfactory description if the magnetic properties of nickel are disregarded.

cond-mat.mes-hall

Reversing the Critical Casimir force by shape deformation

The exact critical Casimir force between periodically deformed boundaries of a 2D semi-infinite strip is obtained for conformally invariant classical systems. Only two parameters (conformal charge and scaling dimension of a boundary changing operator), along withthe solution of an electrostatic problem, determine the Casimir force, rendering the theory practically applicable to any shape and arrangement. The attraction between any two mirror symmetric objects follows directly from our general result. The possibility of purely shape induced reversal of the force, as well as occurrence of stable equilibrium points, is demonstrated for certain conformally invariant models, including the tricritical Ising model.

cond-mat.stat-mech

Conformal Field Theory of Critical Casimir Interactions in 2D

Thermal fluctuations of a critical system induce long-ranged Casimir forces between objects that couple to the underlying field. For two dimensional (2D) conformal field theories (CFT) we derive an exact result for the Casimir interaction between two objects of arbitrary shape, in terms of (1) the free energy of a circular ring whose radii are determined by the mutual capacitance of two conductors with the objects' shape; and (2) a purely geometric energy that is proportional to conformal charge of the CFT, but otherwise super-universal in that it depends only on the shapes and is independent of boundary conditions and other details.

cond-mat.stat-mech

Exact results for classical Casimir interactions: Dirichlet and Drude model in the sphere-sphere and sphere-plane geometry

Analytic expressions that describe Casimir interactions over the entire range of separations have been limited to planar surfaces. Here we derive analytic expressions for the classical or high-temperature limit of Casimir interactions between two spheres (interior and exterior configurations), including the sphere-plane geometry as a special case, using bispherical coordinates. We consider both Dirichlet boundary conditions and metallic boundary conditions described by the Drude model. At short distances, closed-form expansions are derived from the exact result, displaying an intricate structure of deviations from the commonly employed proximity force approximation.

quant-ph

Material dependence of Casimir forces: gradient expansion beyond proximity

A widely used method for estimating Casimir interactions [H. B. G. Casimir, Proc. K. Ned. Akad. Wet. 51, 793 (1948)] between gently curved material surfaces at short distances is the proximity force approximation (PFA). While this approximation is asymptotically exact at vanishing separations, quantifying corrections to PFA has been notoriously difficult. Here we use a derivative expansion to compute the leading curvature correction to PFA for metals (gold) and insulators (SiO$_2$) at room temperature. We derive an explicit expression for the amplitude $\hatθ_1$ of the PFA correction to the force gradient for axially symmetric surfaces. In the non-retarded limit, the corrections to the Casimir free energy are found to scale logarithmically with distance. For gold, $\hatθ_1$ has an unusually large temperature dependence.

quant-ph

Casimir forces beyond the proximity approximation

The proximity force approximation (PFA) relates the interaction between closely spaced, smoothly curved objects to the force between parallel plates. Precision experiments on Casimir forces necessitate, and spur research on, corrections to the PFA. We use a derivative expansion for gently curved surfaces to derive the leading curvature modifications to the PFA. Our methods apply to any homogeneous and isotropic materials; here we present results for Dirichlet and Neumann boundary conditions and for perfect conductors. A Padé extrapolation constrained by a multipole expansion at large distance and our improved expansion at short distances, provides an accurate expression for the sphere-plate Casimir force at all separations.

quant-ph

Comment on "Temperature dependence of the Casimir force for lossy bulk media"

Recently Yampol'skii et al. [Phys. Rev. A v.82, 032511 (2010)] advocated that Lifshitz theory is not applicable when the characteristic wavelength of the fluctuating electromagnetic field, responsible for the thermal correction to the Casimir force, is larger than the size of the metal test bodies. It was claimed that this is the case in experiments which exclude Lifshitz theory combined with the Drude model. We calculate the wavelengths of the evanescent waves giving the dominant contribution to the thermal correction and we find that they are much smaller than the sizes of the test bodies. The opposite conclusion obtained by the authors arose from a confusion between propagating and evanescent waves.

quant-ph

Optical BCS conductivity at imaginary frequencies and dispersion energies of superconductors

We present an efficient expression for the analytic continuation to arbitrary complex frequencies of the complex optical and AC conductivity of a homogeneous superconductor with arbitrary mean free path. Knowledge of this quantity is fundamental in the calculation of thermodynamic potentials and dispersion energies involving type-I superconducting bodies. When considered for imaginary frequencies, our formula evaluates faster than previous schemes involving Kramers--Kronig transforms. A number of applications illustrates its efficiency: a simplified low-frequency expansion of the conductivity, the electromagnetic bulk self-energy due to longitudinal plasma oscillations, and the Casimir free energy of a superconducting cavity.

cond-mat.supr-con

The impact of magnetic properties on atom-wall interaction

The Lifshitz-type formulas for the free energy and Casimir-Polder force acting between an atom possessing a permanent magnetic moment and a wall made of different materials are derived. Simple model allowing analytic results is considered where the atomic magnetic susceptibility is frequency-independent and wall is made of ideal metal. Numerical computations of the Casimir-Polder force are performed for H atom interacting with walls made of ideal metal, nonmagnetic (Au) and ferromagnetic (Fe) metals and of ferromagnetic dielectric. It is shown that for the first three wall materials the inclusion of the magnetic moment of an atom decreases and for the fourth material increases the magnitude of the Casimir-Polder force.

quant-ph

The thermal Casimir effect for rough metallic plates

We propose a new theory of thermal Casimir effect, holding for the experimentally important case of metallic surfaces with a roughness having a spatial scale smaller than the skin depth. The theory is based on a simple phenomenological model for a rough conductor, that explicitly takes account of the fact that ohmic conduction in the immediate vicinity of the surface of a conductor is much impeded by surface roughness, if the amplitude of roughness is smaller than the skin depth. As a result of the new model, we find that surface roughness strongly influences the magnitude of the thermal correction to the Casimir force, independently of the plates separation. Our model, while consistent with recent accurate measurements of the Casimir force in the submicron range, leads to a new prediction for the not yet observed thermal correction to the Casimir force at large plates separation. Besides the thermal Casimir problem, our model is relevant for the correct theoretical interpretation of current experiments probing other proximity effects between conductors, like radiative heat transfer and quantum friction.

quant-ph

Thermal correction to the Casimir force, radiative heat transfer, and an experiment

The low-temperature asymptotic expressions for the Casimir interaction between two real metals described by Leontovich surface impedance are obtained in the framework of thermal quantum field theory. It is shown that the Casimir entropy computed using the impedance of infrared optics vanishes in the limit of zero temperature. By contrast, the Casimir entropy computed using the impedance of the Drude model attains at zero temperature a positive value which depends on the parameters of a system, i.e., the Nernst heat theorem is violated. Thus, the impedance of infrared optics withstands the thermodynamic test, whereas the impedance of the Drude model does not. We also perform a phenomenological analysis of the thermal Casimir force and of the radiative heat transfer through a vacuum gap between real metal plates. The characterization of a metal by means of the Leontovich impedance of the Drude model is shown to be inconsistent with experiment at separations of a few hundred nanometers. A modification of the impedance of infrared optics is suggested taking into account relaxation processes. The power of radiative heat transfer predicted from this impedance is several times less than previous predictions due to different contributions from the transverse electric evanescent waves. The physical meaning of low frequencies in the Lifshitz formula is discussed. It is concluded that new measurements of radiative heat transfer are required to find out the adequate description of a metal in the theory of electromagnetic fluctuations.

quant-ph

On Interferometric Duality in Multibeam Experiments

We critically analyze the problem of formulating duality between fringe visibility and which-way information, in multibeam interference experiments. We show that the traditional notion of visibility is incompatible with any intuitive idea of complementarity, but for the two-beam case. We derive a number of new inequalities, not present in the two-beam case, one of them coinciding with a recently proposed multibeam generalization of the inequality found by Greenberger and YaSin. We show, by an explicit procedure of optimization in a three-beam case, that suggested generalizations of Englert's inequality, do not convey, differently from the two-beam case, the idea of complementarity, according to which an increase of visibility is at the cost of a loss in path information, and viceversa.

quant-ph