arXiv subjects

G. Brida

Publications and source records attributed to G. Brida.

At least 19 recordsLinked to original sources

arXiv2019

Practical applications of quantum sensing: a simple method to enhance sensitivity of Nitrogen-Vacancy-based temperature sensors

Nitrogen-vacancy centers in diamond allow measurement of environment properties such as temperature, magnetic and electric fields at nanoscale level, of utmost relevance for several research fields, ranging from nanotechnologies to bio-sensing. The working principle is based on the measurement of the resonance frequency shift of a single nitrogen-vacancy center (or an ensemble of them), usually detected by by monitoring the center photoluminescence emission intensity. Albeit several schemes have already been proposed, the search for the simplest and most effective one is of key relevance for real applications. Here we present a new continuous-wave lock-in based technique able to reach unprecedented sensitivity in temperature measurement at micro/nanoscale volumes (4.8 mK/Hz$^{1/2}$ in $μ$m$^3$). Furthermore, the present method has the advantage of being insensitive to the enviromental magnetic noise, that in general introduces a bias in the temperature measurement.

quant-ph↗

arXiv2019

Feasibility study towards comparison of the g^(2)(0) measurement in the visible range

This work reports on the pilot study, performed by INRIM, NPL and PTB, on the measurement of the g^(2)(0) parameter in the visible spectral range of a test single-photon source based on a colour centre in diamond. The development of single-photon sources is of great interest to the metrology community as well as the burgeoning quantum technologies industry. Measurement of the g^(2)(0) parameter plays a vital role in characterising and understanding single-photon emission. This comparison has been conducted by each partner individually using its own equipment at INRIM laboratories, which were responsible for the operation of the source

quant-ph↗

arXiv2018

Towards a standard procedure for the measurement of the multi-photon component in a CW telecom heralded single-photon source

Single-photon sources are set to be a fundamental tool for metrological applications as well as for quantum information related technologies. Because of their upcoming widespread dissemination, the need for their characterization and standardization is becoming of the utmost relevance. Here, we illustrate a strategy to provide a quantitative estimate of the multi-photon component of a single-photon source, showing the results achieved in a pilot study for the measurement of the second order autocorrelation function $g^{(2)}$ of a low-noise CW heralded single-photon source prototype (operating at telecom wavelength $λ=1550$ nm) realized in INRiM. The results of this pilot study, involving PTB, NPL and INRiM, will help to build up a robust and unambiguous procedure for the characterization of the emission of a single-photon source.

quant-ph↗

arXiv2017

Single-photon-emitting optical centers in diamond fabricated upon Sn implantation

The fabrication of luminescent defects in single-crystal diamond upon Sn implantation and annealing is reported. The relevant spectral features of the optical centers (emission peaks at 593.5 nm, 620.3 nm, 630.7 nm and 646.7 nm) are attributed to Sn-related defects through the correlation of their photoluminescence (PL) intensity with the implantation fluence. Single Sn-related defects were identified and characterized through the acquisition of their second-order auto-correlation emission functions, by means of Hanbury-Brown-Twiss interferometry. The investigation of their single-photon emission regime as a function of excitation laser power revealed that Sn-related defects are based on three-level systems with a 6 ns radiative decay lifetime. In a fraction of the studied centers, the observation of a blinking PL emission is indicative of the existence of a dark state. Furthermore, absorption dependence from the polarization of the excitation radiation with about 45 percent contrast was measured. This work shed light on the existence of a new optical center associated with a group-IV impurity in diamond, with similar photo-physical properties to the already well-known Si-V and Ge-V emitters, thus providing results of interest from both the fundamental and applicative points of view.

quant-ph↗

arXiv2017

Experiment Investigating the Connection between Weak Values and Contextuality

Weak value measurements have recently given rise to a large interest for both the possibility of measurement amplification and the chance of further quantum mechanics foundations investigation. In particular, a question emerged about weak values being proof of the incompatibility between Quantum Mechanics and Non-Contextual Hidden Variables Theories (NCHVT). A test to provide a conclusive answer to this question was given in [M. Pusey, Phys. Rev. Lett. 113, 200401 (2014)], where a theorem was derived showing the NCHVT incompatibility with the observation of anomalous weak values under specific conditions. In this paper we realize this proposal, clearly pointing out the strict connection between weak values and the contextual nature of Quantum Mechanics.

quant-ph↗

arXiv2017

Determining the Quantum Expectation Value by Measuring a Single Photon

Quantum mechanics, one of the keystones of modern physics, exhibits several peculiar properties, differentiating it from classical mechanics. One of the most intriguing is that variables might not have definite values. A complete quantum description provides only probabilities for obtaining various eigenvalues of a quantum variable. These and corresponding probabilities specify the expectation value of a physical observable, which is known to be a statistical property of an ensemble of quantum systems. In contrast to this paradigm, we demonstrate a unique method allowing to measure the expectation value of a physical variable on a single particle, namely, the polarisation of a single protected photon. This is the first realisation of quantum protective measurements.

quant-ph↗

arXiv2017

Direct experimental observation of nonclassicality in ensembles of single photon emitters

In this work we experimentally demonstrate for the first time a recently proposed criterion adressed to detect nonclassical behavior in the fluorescence emission of ensembles of single-photon emitters. In particular, we apply the method to study clusters of NV centres in diamond observed via single-photon-sensitive confocal microscopy. Theoretical considerations on the behavior of the parameter at any arbitrary order in presence of poissonian noise are presented and, finally, the opportunity of detecting manifold coincidences is discussed.

quant-ph↗

arXiv2016

Single-photon emitters based on NIR colour centres in diamond coupled with solid immersion lenses

Single-photon sources represent a key enabling technology in quantum optics, and single colour centres in diamond are a promising platform to serve this purpose, due to their high quantum efficiency and photostability at room temperature. The widely studied nitrogen vacancy centres are characterized by several limitations, thus other defects have recently been considered, with a specific focus of centres emitting in the Near Infra-Red. In the present work, we report on the coupling of native near-infrared-emitting centres in high-quality single crystal diamond with Solid Immersion Lens structures fabricated by Focused Ion Beam lithography. The reported improvements in terms of light collection efficiency make the proposed system an ideal platform for the development of single-photon emitters with appealing photophysical and spectral properties.

cond-mat.mtrl-sci↗

arXiv2016

Backflash light characterization to prevent QKD zero-error hacking

Single photon avalanche diodes (SPADs) are the most commercially diffused solution for single-photon counting in quantum key distribution (QKD) applications. However, the secondary photon emission, arising from the avalanche of charge carriers during a photon detection, may be exploited by an eavesdropper to gain information without forcing errors in the transmission key. In this paper, we characterise such backflash light in gated InGaAs/InP SPADs, and its spectral and temporal characterization for different detector models and different operating parameters. We qualitatively bound the maximum information leakage due to backflash light, and propose a solution.

quant-ph↗

arXiv2016

Towards joint reconstruction of noise and losses in quantum channels

The calibration of a quantum channel, i.e. the determination of the transmission losses affecting it, is definitely one of the principal objectives in both the quantum communication and quantum metrology frameworks. Another task of the utmost relevance is the identification, e.g. by extracting its photon number distribution, of the noise potentially present in the channel. Here we present a protocol, based on the response of a photon-number-resolving detector at different quantum efficiencies, able to accomplish both of these tasks at once, providing with a single measurement an estimate of the transmission losses as well as the photon statistics of the noise present in the exploited quantum channel. We show and discuss the experimental results obtained in the practical implementation of such protocol, with different kinds and levels of noise.

quant-ph↗

arXiv2015

Measuring incompatible observables of a single photon

One of the most intriguing aspects of Quantum Mechanics is the impossibility of measuring at the same time observables corresponding to non-commuting operators. This impossibility can be partially relaxed when considering joint or sequential weak values evaluation. Indeed, weak measurements have been a real breakthrough in the quantum measurement framework that is of the utmost interest from both a fundamental and an applicative point of view. Here we show how we realized, for the first time, a sequential weak value evaluation of two incompatible observables on a single photon.

quant-ph↗

arXiv2015

Bell measurements as a witness of a dualism in entanglement

We show how a property of dualism, which can exist in the entanglement of identical particles, can be tested in the usual photonic Bell measurement apparatus with minor modifications. Two different sets of coincidence measurements on the same experimental setup consisting of a Hong-Ou-Mandel interferometer demonstrate how the same two-photon state can emerge entanglement in the polarization or the momentum degree of freedom depending on the dynamical variables used for labeling the particles. Our experiment demonstrates how the same source can be used as both a polarization entangled state, as well as a dichotomic momentum entangled state shared between distant users Alice and Bob in accordance to which sets of detectors they access. When the particles become distinguishable by letting the information about one of the variables to be imprinted in yet another (possibly inaccessible) system or degree of freedom, the feature of dualism is expected to vanish. We verify this feature by polarization decoherence (polarization information in environment) or arrival time difference, which both respectively destroy one of the dual forms of entanglement.

quant-ph↗

arXiv2014

Positive Operator-Valued Measure reconstruction of a beam-splitter tree based photon-number-resolving detector

Here we present a reconstruction of the Positive Operator-Value Measurement of a photon-number-resolving detector comprised of three 50:50 beamsplitters in a tree configuration, terminated with four single-photon avalanche detectors. The four detectors' outputs are processed by an electronic board that discriminates detected photon number states from 0 to 4 and implements a "smart counting" routine to compensate for dead time issues at high count rates.

quant-ph↗

arXiv2014

Electrical stimulation of single-photon emission from nitrogen-vacancy centers in diamond with sub-superficial graphitic electrodes

Focused MeV ion beams with micrometric resolution are suitable tools for the direct writing of conductive graphitic channels buried in an insulating diamond bulk. Their effectiveness has been shown for the fabrication of multi-electrode ionizing radiation detectors and cellular biosensors. In this work we investigate such fabrication method for the electrical excitation of color centers in diamond. Differently from optically-stimulated light emission from color centers in diamond, electroluminescence (EL) requires a high current flowing in the diamond subgap states between the electrodes. With this purpose, buried graphitic electrode pairs with a spacing of 10 $μ$m were fabricated in the bulk of a single-crystal diamond sample using a 6 MeV C microbeam. The electrical characterization of the structure showed a significant current above an effective voltage threshold of 150V, which was interpreted according to the theory of Space Charge Limited Current. The EL imaging allowed to identify the electroluminescent regions and the residual vacancy distribution associated with the fabrication technique. Measurements evidenced bright electroluminescent emission from native neutrally-charged nitrogen-vacancy centers ($NV^0$); the acquired spectra highlighted the absence of EL associated with radiation damage.

cond-mat.mtrl-sci↗

arXiv2014

Electroluminescence from a diamond device with ion-beam-micromachined buried graphitic electrodes

Focused MeV ion microbeams are suitable tools for the direct writing of conductive graphitic channels buried in an insulating diamond bulk, as demonstrated in previous works with the fabrication of multi-electrode ionizing radiation detectors and cellular biosensors. In this work we investigate the suitability of the fabrication method for the electrical excitation of colour centres in diamond. Differently from photoluminescence, electroluminescence requires an electrical current flowing through the diamond sub-gap states for the excitation of the colour centres. With this purpose, buried graphitic electrodes with a spacing of 10 micrometers were fabricated in the bulk of a detector-grade CVD single-crystal diamond sample using a scanning 1.8 MeV He micro-beam. The current flowing in the gap region between the electrodes upon the application of a 250 V bias voltage was exploited as the excitation pump for the electroluminescence of different types of colour centres localized in the above-mentioned gap. The bright light emission was spatially mapped using a confocal optical microscopy setup. The spectral analysis of electroluminescence revealed the emission from neutrally-charged nitrogen-vacancy centres ($NV^0$, $λ_{ZPL}$ = 575 nm), as well as from cluster crystal dislocations (A-band, λ = 400-500 nm). Moreover, an electroluminescence signal with appealing spectral features (sharp emission at room temperature, low phonon sidebands) from He-related defects was detected ($λ_{ZPL}$ = 536.3 nm, $λ_{ZPL}$ = 560.5 nm); a low and broad peak around λ = 740 nm was also observed and tentatively ascribed to Si-V or GR1 centres. These results pose interesting future perspectives for the fabrication of electrically-stimulated single-photon emitters in diamond for applications in quantum optics and quantum cryptography.

cond-mat.mtrl-sci↗

arXiv2014

Beating Abbe diffraction limit in confocal microscopy via non-classical photon statistics

We experimentally demonstrate quantum enhanced resolution in confocal fluorescence microscopy exploiting the non-classical photon statistics of single nitrogen-vacancy colour centres in diamond. By developing a general model of super-resolution based on the direct sampling of the kth-order autocorrelation function of the photoluminescence signal, we show the possibility, in some cases, to resolve in principle arbitrarily close emitting centers.

quant-ph↗

arXiv2014

Absolute calibration of a CCD camera with twin beams

We report on the absolute calibration of a CCD camera by exploiting quantum correlation. This novel method exploits a certain number of spatial pairwise quantum correlated modes produced by spontaneous parametric-down-conversion. We develop a measurement model taking into account all the possible source of losses and noise that are not related to the quantum efficiency,accounting for all the uncertainty contributions, and we reach the relative uncertainty of 0.3% in low photon flux regime. This represents a significant step forward for the characterizaion of (scientific) CCDs used in mesoscopic light regime.

quant-ph↗

arXiv2014

Native NIR-emitting single colour centres in CVD diamond

Single-photon sources are a fundamental element for developing quantum technologies, and sources based on colour centres in diamonds are among the most promising candidates. The well-known NV centres are characterized by several limitations, thus few other defects have recently been considered. In the present work, we characterize in detail native efficient single colour centres emitting in the near infra-red in both standard IIa single-crystal and electronic-grade polycrystalline commercial CVD diamond samples. In the former case, a high-temperature annealing process in vacuum is necessary to induce the formation/activation of luminescent centres with good emission properties, while in the latter case the annealing process has marginal beneficial effects on the number and performances of native centres in commercially available samples. Although displaying significant variability in several photo physical properties (emission wavelength, emission rate instabilities, saturation behaviours), these centres generally display appealing photophysical properties for applications as single photon sources: short lifetimes, high emission rates and strongly polarized light. The native centres are tentatively attributed to impurities incorporated in the diamond crystal during the CVD growth of high-quality type IIa samples, and offer promising perspectives in diamond-based photonics.

cond-mat.mtrl-sci↗