arXiv subjects

G. Cabras

Publications and source records attributed to G. Cabras.

10 recordsLinked to original sources

arXiv2026

CubeSats Reach the Millisecond X-Ray Domain: Crab Pulsar Timing with SpIRIT/HERMES

The High Energy Rapid Modular Ensemble of Satellites (HERMES) instrument is a compact X/$\gamma$-ray spectrometer operating on board the 6U (11 kg) SpIRIT CubeSat. The payload is particularly well suited for the observation of cosmic transients such as Gamma-Ray Bursts and bright pulsars thanks to its unique broadband sensitivity from a few keV to a few MeV and the temporal resolution down to half a microsecond. We report here the detection of the $\sim$33~ms Crab pulsar double-peaked pulse profile obtained by considering the canonical Crab ephemerides as provided by the Jodrell Bank catalog. We collected approximately 5.7$\cdot$10$^4$ photons from 730~s of observations, in the 3 keV -- 2 MeV energy band, during a single operation, and achieved a 5$\sigma$ pulse profile significance in the 3--11.5 keV energy band with binning at the ms scale. The results demonstrate that SpIRIT/HERMES can achieve millisecond timing accuracy at high energies and, thanks to its wide field of view and broad energy band, has the potential to contribute to GRB monitoring in the near future. Such capabilities were previously the domain of flagship observatories, underscoring the performance of the HERMES instrument with its compact form factor.

astro-ph.HE↗

arXiv2022

Virgo Detector Characterization and Data Quality: results from the O3 run

The Advanced Virgo detector has contributed with its data to the rapid growth of the number of detected gravitational-wave (GW) signals in the past few years, alongside the two Advanced LIGO instruments. First during the last month of the Observation Run 2 (O2) in August 2017 (with, most notably, the compact binary mergers GW170814 and GW170817), and then during the full Observation Run 3 (O3): an 11-months data taking period, between April 2019 and March 2020, that led to the addition of about 80 events to the catalog of transient GW sources maintained by LIGO, Virgo and now KAGRA. These discoveries and the manifold exploitation of the detected waveforms require an accurate characterization of the quality of the data, such as continuous study and monitoring of the detector noise sources. These activities, collectively named {\em detector characterization and data quality} or {\em DetChar}, span the whole workflow of the Virgo data, from the instrument front-end hardware to the final analyses. They are described in details in the following article, with a focus on the results achieved by the Virgo DetChar group during the O3 run. Concurrently, a companion article describes the tools that have been used by the Virgo DetChar group to perform this work.

gr-qc↗

arXiv2022

Virgo Detector Characterization and Data Quality: tools

Detector characterization and data quality studies -- collectively referred to as {\em DetChar} activities in this article -- are paramount to the scientific exploitation of the joint dataset collected by the LIGO-Virgo-KAGRA global network of ground-based gravitational-wave (GW) detectors. They take place during each phase of the operation of the instruments (upgrade, tuning and optimization, data taking), are required at all steps of the dataflow (from data acquisition to the final list of GW events) and operate at various latencies (from near real-time to vet the public alerts to offline analyses). This work requires a wide set of tools which have been developed over the years to fulfill the requirements of the various DetChar studies: data access and bookkeeping; global monitoring of the instruments and of the different steps of the data processing; studies of the global properties of the noise at the detector outputs; identification and follow-up of noise peculiar features (whether they be transient or continuously present in the data); quick processing of the public alerts. The present article reviews all the tools used by the Virgo DetChar group during the third LIGO-Virgo Observation Run (O3, from April 2019 to March 2020), mainly to analyse the Virgo data acquired at EGO. Concurrently, a companion article focuses on the results achieved by the DetChar group during the O3 run using these tools.

gr-qc↗

arXiv2022

Virgo Detector Characterization and Data Quality during the O3 run

The Advanced Virgo detector has contributed with its data to the rapid growth of the number of detected gravitational-wave signals in the past few years, alongside the two LIGO instruments. First, during the last month of the Observation Run 2 (O2) in August 2017 (with, most notably, the compact binary mergers GW170814 and GW170817) and then during the full Observation Run 3 (O3): an 11 months data taking period, between April 2019 and March 2020, that led to the addition of about 80 events to the catalog of transient gravitational-wave sources maintained by LIGO, Virgo and KAGRA. These discoveries and the manifold exploitation of the detected waveforms require an accurate characterization of the quality of the data, such as continuous study and monitoring of the detector noise. These activities, collectively named {\em detector characterization} or {\em DetChar}, span the whole workflow of the Virgo data, from the instrument front-end to the final analysis. They are described in details in the following article, with a focus on the associated tools, the results achieved by the Virgo DetChar group during the O3 run and the main prospects for future data-taking periods with an improved detector.

gr-qc↗

arXiv2022

The Virgo O3 run and the impact of the environment

Sources of geophysical noise (such as wind, sea waves and earthquakes) or of anthropogenic noise impact ground-based gravitational-wave interferometric detectors, causing transient sensitivity worsening and gaps in data taking. During the one year-long third Observing Run (O3: from April 01, 2019 to March 27, 2020), the Virgo Collaboration collected a statistically significant dataset, used in this article to study the response of the detector to a variety of environmental conditions. We correlated environmental parameters to global detector performance, such as observation range, duty cycle and control losses. Where possible, we identified weaknesses in the detector that will be used to elaborate strategies in order to improve Virgo robustness against external disturbances for the next data taking period, O4, currently planned to start at the end of 2022. The lessons learned could also provide useful insights for the design of the next generation of ground-based interferometers.

gr-qc↗

arXiv2008

A novel background reduction strategy for high level triggers and processing in gamma-ray Cherenkov detectors

Gamma ray astronomy is now at the leading edge for studies related both to fundamental physics and astrophysics. The sensitivity of gamma detectors is limited by the huge amount of background, constituted by hadronic cosmic rays (typically two to three orders of magnitude more than the signal) and by the accidental background in the detectors. By using the information on the temporal evolution of the Cherenkov light, the background can be reduced. We will present here the results obtained within the MAGIC experiment using a new technique for the reduction of the background. Particle showers produced by gamma rays show a different temporal distribution with respect to showers produced by hadrons; the background due to accidental counts shows no dependence on time. Such novel strategy can increase the sensitivity of present instruments.

astro-ph↗

arXiv2007

The MAGIC Project: Contributions to ICRC 2007

The MAGIC Project: Contributions to ICRC 2007, Merida, Mexico. Contents pages for the Contribution on behalf of the MAGIC Collaboration to the 30th ICRC that took place in July 2007 in Merida, Mexico. The contents are in html form with clickable links to the papers that exist on the Astrophysics archive. We hope that this will make it easier to access the output of the conference in a systematic way. Comments on how useful this is/ how it could be improved should be sent to michela.demaria@iuav.it.

astro-ph↗

arXiv2007

Monte Carlo Simulation for the MAGIC-II System

Within the year 2007, MAGIC will be upgraded to a two telescope system at La Palma. Its main goal is to improve the sensitivity in the stereoscopic/coincident operational mode. At the same time it will lower the analysis threshold of the currently running single MAGIC telescope. Results from the Monte Carlo simulations of this system will be discussed. A comparison of the two telescope system with the performance of one single telescope will be shown in terms of sensitivity, angular resolution and energy resolution.

astro-ph↗

arXiv2005

Grid services for the MAGIC experiment

Exploring signals from the outer space has become an observational science under fast expansion. On the basis of its advanced technology the MAGIC telescope is the natural building block for the first large scale ground based high energy gamma-ray observatory. The low energy threshold for gamma-rays together with different background sources leads to a considerable amount of data. The analysis will be done in different institutes spread over Europe. Therefore MAGIC offers the opportunity to use the Grid technology to setup a distributed computational and data intensive analysis system with the nowadays available technology. Benefits of Grid computing for the MAGIC telescope are presented.

astro-ph↗

arXiv2003

Gleam: the GLAST Large Area Telescope Simulation Framework

This paper presents the simulation of the GLAST high energy gamma-ray telescope. The simulation package, written in C++, is based on the Geant4 toolkit, and it is integrated into a general framework used to process events. A detailed simulation of the electronic signals inside Silicon detectors has been provided and it is used for the particle tracking, which is handled by a dedicated software. A unique repository for the geometrical description of the detector has been realized using the XML language and a C++ library to access this information has been designed and implemented.

astro-ph↗