arXiv subjects

G. Carelli

Publications and source records attributed to G. Carelli.

9 recordsLinked to original sources

arXiv2026

First results of a high sensitivity and transportable Ring Laser Gyroscope

Within the GINGER project, aimed at installing an array of large frame ring laser gyroscopes for fundamental physics tests and as part of a geophysics observatory located in the underground laboratory at Gran Sasso, Italy (LNGS-INFN), we are developing a ring laser gyroscope design to reduce spurious rotation of instrumental origin and the ability to extend the cavity side length from 1.5 up to 5 m, thanks to the implementation of suitable spacers. The new design led to a prototype, called TRIO, with a side length of 1.52 m, conceived as a transportable instrument. The present paper reports on several preliminary measurements of the Earth angular velocity carried out with TRIO. Results have the twofold objective to assess the instrument performance in the present geometrical configuration and to test validity of the design in view of the GINGER project. To this aim, data obtained with TRIO are compared with typical data acquired with other, previously made, gyroscope prototypes, including the large frame GINGERINO already in operation at the Gran Sasso underground site.

physics.ins-det↗

arXiv2022

A high sensitivity tool for geophysical applications: A geometrically locked Ring Laser Gyroscope

This work demonstrates that a middle size ring laser gyroscope (RLG) can be a very sensitive and robust instrument for rotational seismology, even if it operates in a quite noisy environment. The RLG has a square cavity, $1.60\times 1.60$ m$^2$, and it lies in a plane orthogonal to the Earth rotational axis. The Fabry-Perot optical cavities along the diagonals of the square were accessed and their lengths were locked to a reference laser. Through a quite simple locking circuit, we were able to keep the sensor fully operative for 14 days. The obtained long term stability is of the order of 3~nanorad/s and the short term sensitivity close is to 2~nanorad/s$\cdot$Hz$^{-1/2}$. These results are limited only by the noisy environment, our laboratory is located in a building downtown.

physics.ins-det↗

arXiv2022

Overcoming 1 part in $10^9$ of Earth angular rotation rate measurement with the G Wettzell data

The absolute measurement of the Earth angular rotation rate with ground-based instruments becomes challenging if the 1 part in $10^9$ of precision has to be obtained. This threshold is important for fundamental physics and for geodesy, to investigate effects of General Relativity and Lorentz violation in the gravity sector and to provide the fast variation of the Earth rotation rate. High sensitivity Ring Laser Gyroscopes (RLG) are currently the only promising technique to achieve this task in the near future, but their precision has been so far limited by systematics related to the laser operation. In this paper we analyze two different sets of observations, each of them three days long. They were obtained from the G ring laser at the Geodetic Observatory Wettzell. The applied method has been developed for the GINGERINO ring laser in order to identify and extract the laser systematics. For the available data sets the residuals show mostly white noise behavior and the Allan deviation drops below 1 part in $10^9$ after an integration time of about $10^4$~s.

physics.geo-ph↗

arXiv2019

Length measurement and stabilisation of the diagonals of a square area laser gyroscope

Large frame ring laser gyroscopes are top sensitivity inertial sensors able to measure absolute angular rotation rate below $\rm \mathbf{prad/s}$ in few seconds. The development of ring laser based on a simple mechanical structure, usually called hetero lithic structure, requires to control the geometry of the apparatus. Our prototype GP2 is a middle size ring laser, whose main purpose is the geometry control with opto-mechanical means. The first tests have been performed, and the data analysed. The lengths of the diagonals of the ring cavity have been measured with $\pmb{μ{\rm m}}$ accuracy, and continuous operation has been obtained, without loss of sensitivity. GP2 is located in a standard laboratory, with a temperature stabilisation around 1 degree Celsius. The analysis shows that middle size ring lasers can obtain nrad/s sensitivity also in a standard environment.

physics.ins-det↗

arXiv2018

Analysis of 90 days operation of the gyroscope GINGERINO

GINGERINO is a square ring-laser prototype, which has been built to investigate the level of noise inside the Gran Sasso underground laboratory. It Is meant for fundamental physics, but it provides suitable data for geophysics and seismology. Since May 2017 it is continuously acquiring data. The analysis of the first $90$ days shows that the duty cycle is higher than $95\%$, and the quantum shot noise limit is of the order of $ 10^{-10}(\mathrm{rad}/s)/\sqrt{\mathrm{Hz}}$. It is located in a seismically active area, and it recorded part of the of central Italy earthquakes. Its high sensitivity in the frequency band of fraction of Hz makes it suitable for seismology studies. The main purpose of the present analysis is to investigate the long term response of the apparatus. Simple and fast routines to eliminate the disturbances coming from the laser have been developed. The Allan deviation of the raw data reaches $10^{-7}$ after about $10^6s$ of integration time, while the processed data shows an improvement of one order of magnitude. Disturbances at the daily time scale are present in the processed data and the expected signal induced by polar motion and solid Earth tide is covered by those disturbances.

physics.ins-det↗

arXiv2016

First Results of GINGERino, a deep underground ringlaser

Large ring-laser gyroscopes are capable of measuring angular rotations with a precision well below fractions of $prad/s$, not far from $10^{-14}$ $rad/s$, the accuracy required for General Relativity tests, this is what the GINGER (Gyroscope-IN-GEneral-Relativity) experiment is aiming for. These features do not guarantee the possibility of measuring the General Relativity Lense--Thirring effect, that manifests itself as a tiny ($\approx 10^{-9} \times Ω_E$) perturbation of the Earth rotation rate. An underground location being in principle less affected by external local disturbances represents a good candidate for housing such a challenging experiment. GINGERino is a test apparatus to investigate the residual local disturbances in the most inner part of the underground international laboratory of the GranSasso (LNGS). It consists of a square ring laser with a $3.6$ m side. The instrument has been tailored to be the larger allowed by the particular location inside the laboratory. Its main objective is to measure the very low frequency rotational motions, in order to prove that LNGS is a suitable location for very low noise measurements and, possibly, General Relativity tests. Aside this main goal, GINGERino will provide unique data for geodesy and geophysics. Its installation has been completed during 2015. Since then, several long set of data have been collected, and the apparatus has been continuously running unattended for more than one week. The typical power spectrum sensitivity was a few $ 10^{-10} rad/s/\sqrt(Hz)$, with integration time not longer than tens of seconds. Improvements of the apparatus are ongoing in order to improve the integration time.

physics.ins-det↗

arXiv2014

A ring-lasers array for fundamental physics

After reviewing the importance of light as a probe for testing the structure of space-time, we describe the GINGER project. GINGER will be a three-dimensional array of large size ring-lasers able to measure the de Sitter and Lense-Thirring effects. The instrument will be located at the underground laboratory of GranSasso, in Italy. We describe the preliminary actions and measurements already under way and present the full road map to GINGER. The intermediate apparatuses GP2 and GINGERino are described. GINGER is expected to be fully operating in few years.

gr-qc↗

arXiv2012

Horizontal rotation signals detected by "G-Pisa" ring laser for the Mw=9.0, March 2011, Japan earthquake

We report the observation of the ground rotation induced by the Mw=9.0, 11th of March 2011, Japan earthquake. The rotation measurements have been conducted with a ring laser gyroscope operating in a vertical plane, thus detecting rotations around the horizontal axis. Comparison of ground rotations with vertical accelerations from a co-located force-balance accelerometer shows excellent ring laser coupling at periods longer than 100s. Under the plane wave assumption, we derive a theoretical relationship between horizontal rotation and vertical acceleration for Rayleigh waves. Due to the oblique mounting of the gyroscope with respect to the wave direction-of-arrival, apparent velocities derived from the acceleration / rotation rate ratio are expected to be always larger than, or equal to the true wave propagation velocity. This hypothesis is confirmed through comparison with fundamental-mode, Rayleigh wave phase velocities predicted for a standard Earth model.

physics.ins-det↗

arXiv2005

Manipulation of ultracold atomic mixtures using microwave techniques

We used microwave radiation to evaporatively cool a mixture of of 133Cs and 87Rb atoms in a magnetic trap. A mixture composed of an equal number (around 10^4) of Rb and Cs atoms in their doubly polarized states at ultracold temperatures was prepared. We also used microwaves to selectively evaporate atoms in different Zeeman states.

physics.atom-ph↗