Searcharxiv⌕ Search

arXiv subjects

G. Colò

Publications and source records attributed to G. Colò.

At least 37 records · Page 2Linked to original sources

Harmonic potential theorem: \\extension to spin-, velocity- and density-dependent interactions

One of the few exact results for the description of the time-evolution of an inhomogeneous, interacting many-particle system is given by the Harmonic Potential Theorem (HPT). The relevance of this theorem is that it sets a tight constraint on time-dependent many-body approximations. In this contribution, we show that the original formulation of the HPT is valid also for the case of spin-, velocity- and density-dependent interactions. This result is completely general and relevant, among the rest, for nuclear structure theory both in the case of ab initio and of more phenomenological approaches. As an example, we report on a numerical implementation by testing the small-amplitude limit of the time-dependent Hartree-Fock -- also known as Random Phase Approximation (RPA) -- for the translational frequencies of a neutron system trapped in a harmonic potential.

nucl-th↗

Nuclear-matter distribution in the proton-rich nuclei $^7$Be and $^8$B from intermediate energy proton elastic scattering in inverse kinematics

Absolute differential cross sections for elastic $p^7$Be and $p^8$B small-angle scattering were measured in inverse kinematics at an energy of 0.7 GeV/u at GSI Darmstadt. The hydrogen-filled ionization chamber IKAR was used as an active target to detect the recoil protons. The projectile tracking and isotope identification were performed with multi-wire proportional chambers and scintillation detectors. The measured cross sections were analysed using the Glauber multiple-scattering theory. The root-mean-square (rms) nuclear matter radii $R_{\rm m} = 2.42 (4)$ fm for $^7$Be and $R_{\rm m} = 2.58 (6)$ fm for $^8$B were obtained. The radial density distribution deduced for $^8$B exhibits a proton halo structure with the rms halo radius $R_{\rm h} = 4.24 (25)$ fm. A comparison of the deduced experimental radii is displayed with existing experimental and theoretical data.

nucl-ex↗

Nuclear excitations within microscopic EDF approaches : pairing and temperature effects on the dipole response

In the present work, the isovector dipole responses, both in the resonance region and in the low-energy sector, are investigated using the microscopic nuclear Energy Density Functionals (EDFs). The self-consistent QRPA model based on Skyrme Hartree Fock BCS approach is applied to study the evolution of the isovector dipole strength by increasing neutron number and temperature. First, the isovector dipole strength and excitation energies are investigated for the Ni isotopic chain at zero temperature. The evolution of the low-energy dipole strength is studied as a function of the neutron number. In the second part, the temperature dependence of the isovector dipole excitations is studied using the self-consistent finite temperature QRPA, below and above the critical temperatures. It is shown that new excited states become possible due to the thermally occupied states above the Fermi level, and opening of the new excitations channels. In addition, temperature leads to fragmentation of the low-energy strength around the neutron separation energies, and between 9 and 12 MeV. We find that the cumulative sum of the strength below E$\leq12$ MeV decreases in open-shell nuclei due to the vanishing of the pairing correlations as temperature increases up to T=1 MeV. The analysis of the transition densities in the low-energy region shows that the proton and neutron transition densities display a mixed pattern: both isoscalar and isovector motion of protons and neutrons are obtained inside nuclei, while the neutron transition density is dominant at the surface region.

nucl-th↗

Interplay between low-lying isoscalar and isovector dipole modes: a comparative analysis between semi-classical and quantum approaches

We perform Time Dependent Hartree-Fock (TDHF) calculations to investigate the small amplitude dipole response of selected neutron-rich nuclei and Sn isotopes. A detailed comparison with the dipole strength predicted by Random-Phase Approximation (RPA) calculations is presented for the first time. TDHF results are also confronted to Vlasov calculations, to explore up to which extent a semi-classical picture can explain the properties of the nuclear response. The focus is on the low-energy response, below the Giant Dipole Resonance region, where different modes of non negligible strength are identified. We show that the relative weight of these excitations evolves with nuclear global features, such as density profile and neutron skin, which in turn reflect impor tant properties of the nuclear effective interaction. A thorough analysis of the associated transition densities turns out to be quite useful to better characterize the mixed isoscalar(IS)/isovector(IV) nature of the different modes and their surface/volume components. In particular, we show that the dipole response in the so-called Pygmy Dipole Resonance region corresponds to isoscalar-like surface oscillations, of larger strength in nuclei with a more diffuse surface. The ratio between the IV and IS Energy Weighted Sum Rule fractions exhausted in this region is shown to almost linearly increase with the neutron skin thickness in Sn isotopes.

nucl-th↗

Density Functional Theory (DFT) for atomic nuclei: a simple introduction

The present contribution does not aim at replacing the huge and often excellent literature on DFT for atomic nuclei, but tries to provide an updated introduction to this topic. The goal would be, ideally, to help a fresh M.Sc. or Ph.D. student (or a researcher from other fields) to become acquainted with some basic concepts, and then move to the specialized textbooks or papers with some ability for orienteering. We first introduce the basics of DFT, and show the difference with the "naive" mean-field theory, that is doomed to fail as a model even in the simple case of uniform nuclear matter. We introduce the Energy Density Functionals (EDFs) that are used in nuclear structure, with few examples of their applications. The concepts of symmetry breaking and restoration are briefly discussed. We also include an introduction to the time-dependent extension of DFT that, so far, has been implemented essentially only in the adiabatic approximation and has been applied mainly to the study of nuclear vibrations. With this material, we hope that any reader is able to deal with the texts that go deeper into each of the topics, having understood that DFT is probably the best compromise in nuclear structure theory between simplicity, accuracy, and broad range of applicability.

nucl-th↗

Low-energy quadrupole states in neutron-rich tin nuclei

We present a study on the isoscalar quadrupole strength in tin nuclei, focusing mainly on the low-energy region. The calculations are performed using the Skyrme type energy density functionals within the fully self-consistent quasiparticle random phase approximation, allowing for a good description of the experimental data for the first 2$^+$ state and the isoscalar giant quadrupole resonance. It is found that the first $2^+$ state and the low-energy quadrupole states between 3 and 6 MeV display an opposite behavior with increasing neutron number. While the strength of the first $2^+$ state decreases, some excited states start to accumulate between 3 and 6 MeV, and increase their strength with increasing neutron number. This low-energy region between 3 and 6 MeV is quite sensitive to the changes in the shell structure with increasing neutron number. In particular, between $^{116}$Sn and $^{132}$Sn, the filling of the neutron orbitals with large values of $j$, has an important impact on the low-energy region. Our analysis shows that the low-energy states have a non-collective character, except the first 2$^+$ state. In addition, the states in the low-energy region above 5 MeV display an interesting pattern: with the increase of the neutron number, their strength increases and their nature changes, namely they switch from proton excitations to neutron-dominated one. We conclude that the low-energy quadrupole states between 3 and 6 MeV can provide information about the shell evolution in open-shell nuclei.

nucl-th↗

Isospin mixing and Coulomb mixing in ground states of even-even nuclei

In this work, the Coulomb mixing and the isospin mixing in the ground states of even-even nuclei are evaluated in perturbation theory. The calculation of the isospin mixing is performed by using the connection to isovector monopole resonance properties. The uncertainty in the results that depends on different choices of the Skyrme interactions is shown. While Coulomb mixing turns out to be large in the ground states of heavy nuclei, isospin mixing is very small.

nucl-th↗

Multipole excitations in hot nuclei within the finite temperature quasiparticle random phase approximation framework

The effect of temperature on the evolution of the isovector dipole and isoscalar quadrupole excitations in $^{68}$Ni and $^{120}$Sn nuclei is studied within the fully self-consistent finite temperature quasiparticle random phase approximation framework, based on the Skyrme-type SLy5 energy density functional. The new low-energy excitations emerge due to the transitions from thermally occupied states to the discretized continuum at finite temperatures, whereas the isovector giant dipole resonance is not strongly impacted by the increase of temperature. The radiative dipole strength at low-energies is also investigated for the $^{122}$Sn nucleus, becoming compatible with the available experimental data when the temperature is included. In addition, both the isoscalar giant quadrupole resonance and low-energy quadrupole states are sensitive to the temperature effect: while the centroid energies decrease in the case of the isoscalar giant quadrupole resonance, the collectivity of the first $2^{+}$ state is quenched and the opening of new excitation channels fragments the low-energy strength at finite temperatures.

nucl-th↗

Towards a self-consistent dynamical nuclear model

Density Functional Theory (DFT) is a powerful and accurate tool exploited in Nuclear Physics to investigate the ground-state and some collective properties of nuclei along the whole nuclear chart. Models based on DFT are, however, not suitable for the description of single-particle dynamics in nuclei. Following the field theoretical approach by A. Bohr and B. R. Mottelson to describe nuclear interactions between single-particle and vibrational degrees of freedom, we have undertaken important steps to build a microscopic dynamic nuclear model. In connection to that, one important issue that needs to be better understood is the renormalization of the effective interaction in the particle-vibration approach. One possible way to renormalize the interaction is the so called {\it subtraction method}. In this contribution we will implement the {\it subtraction method} for the first time in our model and study its consequences.

nucl-th↗

Model dependence of the neutron-skin thickness on the symmetry energy

The model dependence in the correlations of the neutron-skin thickness in heavy nuclei with various symmetry energy parameters is analyzed by using several families of systematically varied microscopic mean field models. Such correlations show a varying degree of model dependence once the results for all the different families are combined. Some mean field models associated with similar values of the symmetry energy slope parameter at saturation density $L$, and pertaining to different families, yield a greater-than-expected spread in the neutron-skin thickness of the $^{208}$Pb nucleus. The effective value of the symmetry energy slope parameter $L_{\rm eff}$, determined by using the nucleon density profiles of the finite nucleus and the density derivative $S^\prime(ρ)$ of the symmetry energy starting from about saturation density up to low densities typical of the surface of nuclei, seems to account for the spread in the neutron-skin thickness for the models with similar $L$. The differences in the values of $L_{\rm eff}$ are mainly due to the small differences in the nucleon density distributions of heavy nuclei in the surface region and the behavior of the symmetry energy at subsaturation densities.

nucl-th↗

Second--order equation of state with the Skyrme interaction. Cutoff and dimensional regularization with the inclusion of rearrangement terms

We evaluate the second--order (beyond--mean--field) contribution to the equation of state of nuclear matter with the effective Skyrme force and use cutoff and dimensional regularizations to treat the ultraviolet divergence produced by the zero--range character of this interaction. An adjustment of the force parameters is then performed in both cases to remove any double counting generated by the explicit computation of beyond--mean--field corrections with the Skyrme force. In addition, we include at second order the rearrangement terms associated to the density--dependent part of the Skyrme force and discuss their effect. Sets of parameters are proposed to define new effective forces which are specially designed for second--order calculations in nuclear matter.

nucl-th↗

Outer crust of a cold non-accreting magnetar

The outer crust structure and composition of a cold, non-accreting magnetar is studied. We model the outer crust to be made of fully equilibrated matter where ionized nuclei form a Coulomb crystal embedded in an electron gas. The main effects of the strong magnetic field are those of quantizing the electron motion in Landau levels and of modifying the nuclear single particle levels producing, on average, an increased binding of nucleons in nuclei present in the Coulomb lattice. The effect of an homogeneous and constant magnetic field on nuclear masses has been predicted by using a covariant density functional, in which induced currents and axial deformation due to the presence of a magnetic field that breaks time-reversal symmetry have been included self-consistently in the nucleon and meson equations of motion. Although not yet observed, for $B\gtrsim 10^{16}$G both effects contribute to produce different compositions and to enlarge the range of pressures typically present in common neutron stars. Specifically, in such a regime, the magnetic field effects on nuclei favor the appearance of heavier nuclei at low pressures. As $B$ increases, such heavier nuclei are also preferred up to larger pressures. In the most extreme case, the whole outer crust is almost made of ${}_{40}^{92}$Zr$_{52}$.

nucl-th↗

Equation of state of nuclear matter from empirical constraints

From empirically determined values of some of the characteristic constants associated with homogeneous nuclear matter at saturation and sub-saturation densities, within the framework of a Skyrme-inspired energy density functional, we construct an equation of state (EoS) of nuclear matter.This EoS is then used to predict values of density slope parameters of symmetry energy $L(ρ)$, isoscalar incompressibility $K(ρ)$ and a few related quantities. The close consonance of our predicted values with the currently available ones for the density dependence of symmetry energy and incompressibility gleaned from diverse approaches offers the possibility that our method may help in settling their values in tighter bounds. Extrapolation of our EoS at supranormal densities shows that it is in good harmony with the one extracted from experimental data.

nucl-th↗

Effect of temperature on the effective mass and the neutron skin of nuclei

We study the finite temperature Hartree-Fock-BCS approximation for selected stable Sn nuclei with zero-range Skyrme forces. Hartree Fock BCS approximation allows for a straightforward interpretation of the results since it involves u and v's which are not matrices as in HFB. Pairing transitions from superfluid to the normal state are studied with respect to the temperature. The temperature dependence of the nuclear radii and neutron skin are also analyzed. An increase of proton and neutron radii is obtained in neutron rich nuclei especially above the critical temperature. Using different Skyrme energy functionals, it is found that the correlation between the effective mass in symmetric nuclear matter and the critical temperature depends on the pairing prescription. The temperature dependence of the nucleon effective mass is also investigated, showing that proton and neutron effective masses display different behavior below and above the critical temperature, due to the small temperature dependence of the density.

nucl-th↗

Covariance analysis for Energy Density Functionals and instabilities

We present the covariance analysis of two successful nuclear energy density functionals, (i) a non-relativistic Skyrme functional built from a zero-range effective interaction, and (ii) a relativistic nuclear energy density functional based on density dependent meson-nucleon couplings. The covariance analysis is a useful tool for understanding the limitations of a model, the correlations between observables and the statistical errors. We show, for our selected test nucleus 208Pb, that when the constraint on a property A included in the fit is relaxed, correlations with other observables B become larger; on the other hand, when a strong constraint is imposed on A, the correlations with other properties become very small. We also provide a brief review, partly connected with the covariance analysis, of some instabilities displayed by several energy density functionals currently used in nuclear physics.

nucl-th↗

Symmetry energy from the nuclear collective motion: constraints from dipole, quadrupole, monopole and spin-dipole resonances

The experimental and theoretical studies of Giant Resonances, or more generally of the nuclear collective vibrations, are a well established domain in which sophisticated techniques have been introduced and firm conclusions reached after an effort of several decades. From it, information on the nuclear equation of state can be extracted, albeit not far from usual nuclear densities. In this contribution, which complements other contributions appearing in the current volume, we survey some of the constraints that have been extracted recently concerning the parameters of the nuclear symmetry energy. Isovector modes, in which neutrons and protons are in opposite phase, are a natural source of information and we illustrate the values of symmetry energy around saturation deduced from isovector dipole and isovector quadrupole states. The isotopic dependence of the isoscalar monopole energy has also been suggested to provide a connection to the symmetry energy: relevant theoretical arguments and experimental results are thoroughly discussed. Finally, we consider the case of the charge-exchange spin-dipole excitations in which the sum rule associated with the total strength gives in principle access to the neutron skin and thus, indirectly, to the symmetry energy.

nucl-th↗

Electric Dipole Polarizability in ${}^{208}$Pb: insights from the Droplet Model

We study the electric dipole polarizability $α_D$ in ${}^{208}$Pb based on the predictions of a large and representative set of relativistic and non-relativistic nuclear mean field models. We adopt the droplet model as a guide to better understand the correlations between $α_D$ and other isovector observables. Insights from the droplet model suggest that the product of $α_D$ and the nuclear symmetry energy at saturation density $J$ is much better correlated with the neutron skin thickness $Δr_{np}$ of ${}^{208}$Pb than the polarizability alone. Correlations of $α_D J$ with $Δr_{np}$ and with the symmetry energy slope parameter $L$ suggest that $α_D J$ is a strong isovector indicator. Hence, we explore the possibility of constraining the isovector sector of thenuclear energy density functional by comparing our theoretical predictions against measurements of both $α_D$ and the parity-violating asymmetry in ${}^{208}$Pb. We find that the recent experimental determination of $α_D$ in ${}^{208}$Pb in combination with the range for the symmetry energy at saturation density $J=[31\pm (2)_{\rm est.}]$\,MeV suggests $Δr_{np}({}^{208}{\rm Pb}) = 0.165 \pm (0.009)_{\rm exp.} \pm (0.013)_{\rm theo.} \pm (0.021)_{\rm est.} {\rm fm}$ and $L= 43 \pm(6)_{\rm exp.} \pm (8)_{\rm theo.}\pm(12)_{\rm est.}$ MeV.

nucl-th↗

A microscopic model beyond mean-field: from giant resonances properties to the fit of new effective interactions

A completely microscopic beyond mean-field approach has been elaborated to overcome some intrinsic limitations of self-consistent mean-field schemes applied to nuclear systems, such as the incapability to produce some properties of single-particle states (e.g. spectroscopic factors), as well as of collective states (e.g. their damping width and their gamma decay to the ground state or to low lying states). Since commonly used effective interactions are fitted at the mean-field level, one should aim at refitting them including the desired beyond mean-field contributions in the refitting procedure. If zero-range interactions are used, divergences arise. We present some steps towards the refitting of Skyrme interactions, for its application in finite nuclei.

nucl-th↗