Searcharxiv⌕ Search

arXiv subjects

G. Kar

Publications and source records attributed to G. Kar.

8 recordsLinked to original sources
arXiv2022

Monolithic TCAD Simulation of Phase-Change Memory (PCM/PRAM) + Ovonic Threshold Switch (OTS) Selector Device

Owing to the increasing interest in the commercialization of phase-change memory (PCM) devices, a number of TCAD models have been developed for their simulation. These models formulate the melting, amorphization and crystallization of phase-change materials as well as their extreme conductivity dependence on both electric field and temperature into a set of self-consistently-solved thermoelectric and phase-field partial-differential equations. However, demonstrations of the ability of such models to match actual experimental results are rare. In addition, such PCM devices also require a so-called selector device - such as an Ovonic Threshold Switching (OTS) device - in series for proper memory operation. However, monolithic simulation of both the PCM and OTS selector device in a single simulation is largely absent from the literature, despite its potential value for material- and design-space explorations. It is the goal of this work to first characterize a PCM device in isolation against experimental data, then to demonstrate the qualitative behavior of a simulated OTS device in isolation and finally to perform a single monolithic simulation of the PCM + OTS device within the confines of a commercially available TCAD solver: GTS Framework.

cond-mat.mes-hall↗
arXiv2017

Material developments and domain wall based nanosecond-scale switching process in perpendicularly magnetized STT-MRAM cells

We investigate the Gilbert damping and the magnetization switching of perpendicularly magnetized FeCoB-based free layers embedded in tunnel junctions adequate for spin-torque operated memories. We study the influence of the boron content in MgO / FeCoB /Ta systems alloys on their Gilbert damping after crystallization annealing. Increasing the boron content from 20 to 30\% increases the crystallization temperature, thereby postponing the onset of elemental diffusion within the free layer. This reduction of the interdiffusion of the Ta atoms helps maintaining the Gilbert damping at a low level of 0.009 without any penalty on the anisotropy and the magneto-transport properties up to the 400$^\circ$C annealing required in CMOS back-end of line processing. In addition, we show that dual MgO free layers of composition MgO/FeCoB/Ta/FeCoB/MgO have a substantially lower damping than their MgO/FeCoB/Ta counterparts, reaching damping parameters as low as 0.0039 for a 3 Å thick Tantalum spacer. This confirms that the dominant channel of damping is the presence of Ta impurities within the FeCoB alloy. On optimized tunnel junctions, we then study the duration of the switching events induced by spin-transfer-torque. We focus on the sub-threshold thermally activated switching in optimal applied field conditions. From the electrical signatures of the switching, we infer that once the nucleation has occurred, the reversal proceeds by a domain wall sweeping though the device at a few 10 m/s. The smaller the device, the faster its switching. We present an analytical model to account for our findings. The domain wall velocity is predicted to scale linearly with the current for devices much larger than the wall width. The wall velocity depends on the Bloch domain wall width, such that the devices with the lowest exchange stiffness will be the ones that host the domain walls with the slowest mobilities.

cond-mat.mtrl-sci↗
arXiv2017

Annealing stability of magnetic tunnel junctions based on dual MgO free layers and [Co/Ni] based thin synthetic antiferromagnet fixed system

We study the annealing stability of bottom-pinned perpendicularly magnetized magnetic tunnel junctions based on dual MgO free layers and thin fixed systems comprising a hard [Co/Ni] multilayer antiferromagnetically coupled to thin a Co reference layer and a FeCoB polarizing layer. Using conventional magnetometry and advanced broadband ferromagnetic resonance, we identify the properties of each sub-unit of the magnetic tunnel junction and demonstrate that this material option can ensure a satisfactory resilience to the 400$^\circ$C thermal annealing needed in solid-state magnetic memory applications. The dual MgO free layer possesses an anneal-robust 0.4 T effective anisotropy and suffers only a minor increase of its Gilbert damping from 0.007 to 0.010 for the toughest annealing conditions. Within the fixed system, the ferro-coupler and texture-breaking TaFeCoB layer keeps an interlayer exchange above 0.8 mJ/m$^2$, while the Ru antiferrocoupler layer within the synthetic antiferromagnet maintains a coupling above -0.5 mJ/m$^2$. These two strong couplings maintain the overall functionality of the tunnel junction upon the toughest annealing despite the gradual degradation of the thin Co layer anisotropy that may reduce the operation margin in spin torque memory applications. Based on these findings, we propose further optimization routes for the next generation magnetic tunnel junctions.

cond-mat.mtrl-sci↗
arXiv2017

Seed Layer Impact on Structural and Magnetic Properties of [Co/Ni] Multilayers with Perpendicular Magnetic Anisotropy

[Co/Ni] multilayers with perpendicular magnetic anisotropy (PMA) have been researched and applied in various spintronic applications. Typically the seed layer material is studied to provide the desired face-centered cubic (\textit{fcc}) texture to the [Co/Ni] to obtain PMA. The integration of [Co/Ni] in back-end-of-line (BEOL) processes also requires the PMA to survive post-annealing. In this paper, the impact of NiCr, Pt, Ru, and Ta seed layers on the structural and magnetic properties of [Co(0.3 nm)/Ni(0.6 nm)] multilayers is investigated before and after annealing. The multilayers were deposited \textit{in-situ} on different seeds via physical vapor deposition at room temperature. The as-deposited [Co/Ni] films show the required \textit{fcc}(111) texture on all seeds, but PMA is only observed on Pt and Ru. In-plane magnetic anisotropy (IMA) is obtained on NiCr and Ta seeds, which is attributed to strain-induced PMA loss. PMA is maintained on all seeds after post-annealing up to 400$^{\circ}$C. The largest effective perpendicular anisotropy energy ($K_U^{\mathrm{eff}}\approx 2\times10^5$J/m$^3$) after annealing is achieved on NiCr seed. The evolution of PMA upon annealing cannot be explained by further crystallization during annealing or strain-induced PMA, nor can the observed magnetization loss and the increased damping after annealing. Here we identify the diffusion of the non-magnetic materials from the seed into [Co/Ni] as the major driver of the changes in the magnetic properties. By selecting the seed and post-annealing temperature, the [Co/Ni] can be tuned in a broad range for both PMA and damping.

cond-mat.mtrl-sci↗
arXiv2016

Ferromagnetic resonance study of composite Co/Ni - FeCoB free layers with perpendicular anisotropy

We study the properties of composite free layers with perpendicular anisotropy. The free layers are made of a soft FeCoB layer ferromagnetically coupled by a variable spacer (Ta, W, Mo) to a very anisotropic [Co/Ni] multilayer embodied in a magnetic tunnel junction meant for spin torque memory applications. For this we use broadband ferromagnetic resonance to follow the field dependence of the acoustical and optical excitation of the composite free layer in both in-plane and out-of-plane applied fields. The modeling provides the interlayer exchange coupling, the anisotropies and the damping factors. The popular Ta spacer are outperformed by W and even more by Mo, which combines the strongest interlayer exchange coupling without sacrificing anisotropies, damping factors and transport properties.

cond-mat.mtrl-sci↗
arXiv2016

Time-resolved spin-torque switching in MgO-based perpendicularly magnetized tunnel junctions

We study ns scale spin-torque-induced switching in perpendicularly magnetized tunnel junctions (pMTJ). Although the switching voltages match with the macrospin instability threshold, the electrical signatures of the reversal indicate the presence of domain walls in junctions of various sizes. In the antiparallel (AP) to parallel (P) switching, a nucleation phase is followed by an irreversible flow of a wall through the sample at an average velocity of 40 m/s with back and forth oscillation movements indicating a Walker propagation regime. A model with a single-wall locally responding to the spin-torque reproduces the essential dynamical signatures of the reversal. The P to AP transition has a complex dynamics with dynamical back-hopping whose probability increases with voltage. We attribute this back-hopping to the instability of the nominally fixed layers.

cond-mat.mes-hall↗
arXiv1999

Noncomplemetary Wave-Particle Phenomena Revisited

The simultaneous verification of wave and particle property in some recently suggested experiments has been reviewed in the light of Hilbert space formalism. In this respect, the recent analysis of biprism experiment [J. L. Cereceda, Am. J. Phys. 64 (1996) 459] is criticized.

quant-ph↗