SearcharxivSearch

arXiv subjects

G. L. Huang

Publications and source records attributed to G. L. Huang.

7 recordsLinked to original sources

Discovery of EP J175257.3-351923 as a Candidate Black Hole Low-Mass X-ray Binary

We report the discovery of a new X-ray transient, EP J175257.3-351923 (EP250916a), by the Einstein Probe (EP) near the Galactic plane. The outburst lasted for at least 250\,days, reached a peak 2--10 keV flux of $\sim 4 \times 10^{-10}$~erg~cm$^{-2}$~s$^{-1}$, and exhibited a fast-rise exponential-decay (FRED) profile typical of X-ray binary outbursts. The source remained in the hard state throughout the outburst, with only modest variations in the photon index ($\sim 1.6$--$2.2$) and no evidence for a spectral state transition. Broadband spectral modeling suggests a truncated disk, a weak reflection component, and a high-energy cutoff at $\sim 217$~keV, consistent with hard-state accretion in black-hole systems. No reliable optical or radio counterpart is detected within the Swift/XRT error circle. The inferred X-ray-to-optical and X-ray-to-radio flux ratios are consistent with a low-mass X-ray binary classification. Neither pulsations nor significant aperiodic variability are detected. Although the compact object cannot yet be firmly identified, the timing, spectral, and multiwavelength evidence favors EP~J175257.3--351923 as a black-hole low-mass X-ray binary candidate, highlighting EP's potential to uncover a faint, previously hidden population of X-ray binaries.

astro-ph.HE

The Integrated Pulse Profiles of Fast Radio Bursts

Multi-peaked features appear on the integrated pulse profiles of fast radio burst observed below 2.5 GHz and the instantaneous spectrum of many bursts observed between 4 and 8 GHz. The mechanism of pulse or spectrum shaping has attracted little attention. Here we show that these interference-like pulse profiles are mostly the instantaneous spectra near the source regions of fast radio bursts. The corresponding instantaneous spectra are coincident to the spectrum from a single electron passing through a tapered undulator. The multi-peaked spectrum observed between 4 and 8 GHz can also be explained consistently by this type of spectrum. The spectrum is invisible unless the particles in the radiation beam are bunched. The bunching effect is probably due to the acceleration of particles in the plasma wakefield.

astro-ph.HE

Polar metamaterials: A new outlook on resonance for cloaking applications

Rotationally resonant metamaterials are leveraged to answer a longstanding question regarding the existence of transformation-invariant elastic materials and the ad-hoc possibility of transformationbased passive cloaking in full plane elastodynamics. Combined with tailored lattice geometries, rotational resonance is found to induce a polar and chiral behavior; that is a behavior lacking stress and mirror symmetries, respectively. The central, and simple, idea is that a population of rotating resonators can exert a density of body torques strong enough to modify the balance of angular momentum on which hang these symmetries. The obtained polar metamaterials are used as building blocks of a cloaking device. Numerical tests show satisfactory cloaking performance under pressure and shear probing waves, further coupled through a free boundary. The work sheds new light on the phenomenon of resonance in metamaterials and should help put transformation elastodynamics on equal footing with transformation acoustics and optics.

physics.app-ph

Kirigami-based Elastic Metamaterials with Anisotropic Mass Density for Subwavelength Flexural Wave Control

A novel design of an elastic metamaterial with anisotropic mass density is proposed to manipulate flexural waves at a subwavelength scale. The three-dimensional metamaterial is inspired by kirigami, which can be easily manufactured by cutting and folding a thin metallic plate. By attaching the resonant kirigami structures periodically on the top of a host plate, a metamaterial plate can be constructed without any perforation that degrades the strength of the pristine plate. An analytical model is developed to understand the working mechanism of the proposed elastic metamaterial and the dispersion curves are calculated by using an extended plane wave expansion method. As a result, we verify an anisotropic effective mass density stemming from the coupling between the local resonance of the kirigami cells and the global flexural wave propagations in the host plate. Finally, numerical simulations on the directional flexural wave propagation in a two-dimensional array of kirigami metamaterial as well as super-resolution imaging through an elastic hyperlens are conducted to demonstrate the subwavelength-scale flexural wave control abilities. The proposed kirigami-based metamaterial has the advantages of no-perforation design and subwavelength flexural wave manipulation capability, which can be highly useful for engineering applications including non-destructive evaluations and structural health monitoring.

physics.app-ph

Enhanced flexural wave sensing by adaptive gradient-index metamaterials

Increasing sensitivity and signal to noise ratios of conventional wave sensors is an interesting topic in structural health monitoring, medical imaging, aerospace and nuclear instrumentation. Here, we report the concept of a gradient piezoelectric self-sensing system by integrating shunting circuitry into conventional sensors. By tuning circuit elements properly, both the quality and quantity of the flexural wave measurement data can be significantly increased for new adaptive sensing applications. Through analytical, numerical and experimental studies, we demonstrate that the metamaterial-based sensing system (MBSS) with gradient bending stiffness can be designed by connecting gradient negative capacitance circuits to an array of piezoelectric patches (sensors). We further demonstrate that the proposed system can achieve more than two orders of magnitude amplification of flexural wave signals to overcome the detection limit. This research encompasses fundamental advancements in the MBSS with improved performance and functionalities, and will yield significant advances for a range of applications.

cond-mat.mtrl-sci

Chiral effect in plane isotropic micropolar elasticity and its application to chiral lattices

In continuum mechanics, the non-centrosymmetric micropolar theory is usually used to capture the chirality inherent in materials. However when reduced to a two dimensional (2D) isotropic problem, the resulting model becomes non-chiral. Therefore, influence of the chiral effect cannot be properly characterized by existing theories for 2D chiral solids. To circumvent this difficulty, based on reinterpretation of isotropic tensors in a 2D case, we propose a continuum theory to model the chiral effect for 2D isotropic chiral solids. A single material parameter related to chirality is introduced to characterize the coupling between the bulk deformation and the internal rotation which is a fundamental feature of 2D chiral solids. Coherently, the proposed continuum theory is also derived for a triangular chiral lattice from a homogenization procedure, from which the effective material constants of the lattice are analytically determined. The unique behavior in the chiral lattice is demonstrated through the analyses of a static tension problem and a plane wave propagation problem. The results, which cannot be predicted by the non-chiral model, are validated by the exact solution of the discrete model.

cond-mat.mtrl-sci