Searcharxiv⌕ Search

arXiv subjects

G. Lamura

Publications and source records attributed to G. Lamura.

At least 37 records · Page 2Linked to original sources
arXiv2012

Phase separation at the magnetic-superconducting transition in La$_{0.7}$Y$_{0.3}$FeAsO$_{1-x}$F$_{x}$

In this paper we report a detailed $μ^{+}$SR and {}$^{19}$F-NMR study of the La$_{0.7}$Y$_{0.3}$FeAsO$_{1-x}$F$_{x}$ class of materials. Here, the diamagnetic La$_{1-y}$Y$_{y}$ substitution increases chemical pressure and, accordingly, sizeably enhances the optimal superconducting transition temperature. We investigate the magnetic-superconducting phase transition by keeping the Y content constant ($y = 0.3$) and by varying the F content in the range $0.025 \leq x \leq 0.15$. Our results show how magnetism and superconductivity coexist for $x = 0.065$. Such coexistence is due to segregation of the two phases in macroscopic regions, resembling what was observed in LaFeAsO$_{1-x}$F$_{x}$ materials under applied hydrostatic pressure. This scenario is qualitatively different from the nanoscopic coexistence of the two order parameters observed when La is fully substituted by magnetic rare-earth ions like Sm or Ce.

cond-mat.supr-con↗
arXiv2012

A new approach for improving global critical current density in Fe(Se0.5Te0.5) polycrystalline materials

A novel method to prepare bulk Fe(Se0.5Te0.5) samples is presented, based on a melting process and a subsequent annealing treatment. With respect to the standard sintering technique, it produces much more homogeneous and denser samples, characterized by large and well interconnected grains. The resulting samples exhibit optimal critical temperature values, sharp resistive and magnetic transitions, large magnetic hysteresis loops and high upper critical fields are observed. Interestingly, the global critical current density is much enhanced as compared to the values reported in literature for bulk samples of the same 11 family, reaching about 103 A/cm2 at zero field at 4.2 K as assessed by magnetic, transport and magneto-optical techniques. Even more importantly, its field dependence turns out to be very weak, such that at μ_{0}H = 7 T it is suppressed only by a factor \sim2.

cond-mat.supr-con↗
arXiv2011

Correlated trends of coexisting magnetism and superconductivity in optimally electron-doped oxy-pnictides

We report on the recovery of the short-range static magnetic order and on the concomitant degradation of the superconducting state in optimally F-doped SmFe_(1-x)Ru_(x)AsO_0.85F_0.15 for 0.1< x<0.6. The two reduced order parameters coexist within nanometer-size domains in the FeAs layers and finally disappear around a common critical threshold x_c=0.6. Superconductivity and magnetism are shown to be closely related to two distinct well-defined local electronic environments of the FeAs layers. The two transition temperatures, controlled by the isoelectronic and diamagnetic Ru substitution, scale with the volume fraction of the corresponding environments. This fact indicates that superconductivity is assisted by magnetic fluctuations, which are frozen whenever a short-range static order appears, and totally vanish above the magnetic dilution threshold x_c.

cond-mat.supr-con↗
arXiv2011

Long- to short-range magnetic order in fluorine-doped CeFeAsO

The evolution of the antiferromagnetic order parameter in CeFeAsO_{1-x}F_{x} as a function of the fluorine content x was investigated primarily via zero-field muon-spin spectroscopy. The long-range magnetic order observed in the undoped compound gradually turns into a short-range order at x=0.04, seemingly accompanied/induced by a drastic reduction of the magnetic moment of the iron ions. Superconductivity appears upon a further increase in doping (x>0.04) when, unlike in the cuprates, the Fe magnetic moments become even weaker. The resulting phase diagram evidences the presence of a crossover region, where the superconducting and the magnetic order parameters coexist on a nanoscopic range.

cond-mat.supr-con↗
arXiv2010

Nanoscopic coexistence of magnetic and superconducting states within the FeAs layers of CeFeAsO1-xFx

We report on the coexistence of magnetic and superconducting states in CeFeAsO1-xFx for x=0.06(2), characterized by transition temperatures T_m=30 K and T_c=18 K, respectively. Zero and transverse field muon-spin relaxation measurements show that below 10 K the two phases coexist within a nanoscopic scale over a large volume fraction. This result clarifies the nature of the magnetic-to-superconducting transition in the CeFeAsO1-xFx phase diagram, by ruling out the presence of a quantum critical point which was suggested by earlier studies.

cond-mat.supr-con↗
arXiv2010

Isoelectronic Ru substitution at Fe-site in Sm(Fe1-xRux)As(O0.85F0.15) compound and its effects on structural, superconducting and normal state properties

In this work we present a systematic experimental and theoretical study of the structural, transport and superconducting properties of Sm(Fe1-xRux)As(O0.85F0.15) polycrystalline samples as a function of Ru content (x) ranging from 0 to 1. The choice of Ru as isoelectronic substitution at Fe site of F-doped compounds allows to better clarify the role of structural disorder in modifying the normal and superconducting properties of these newly discovered multiband superconductors. Two different regions are identified: the Fe-rich phase (x<0.5) where superconducting and normal state properties are strongly affected by disorder induced by Ru substitution; the Ru-rich phase (x>0.5) where the system is metallic and strongly compensated and the presence of Ru frustrates the magnetic moment on Fe ions. Here the lack of magnetic features and related spin fluctuations may be the cause for the suppression of superconductivity.

cond-mat.supr-con↗
arXiv2009

Seebeck effect in Fe1+xTe1-ySey single crystals

We present measurements of resistivity and thermopower of Fe1+xTe1-ySey single crystalline samples with y=0, 0.1, 0.2, 0.3 and 0.45 in zero field and in a magnetic field B=8T. We propose a qualitative analysis of the temperature behavior of S, where the samples are described as almost compensated semimetals: different electron and hole bands with similar carrier concentrations compete and their relative contribution to the thermoelectric transport depends on the respective filling, mobility and coupling with phonons. For y>=0.2, superconductivity occurs and the optimum Se-doping level for a maximum Tc of 13 K turns out to be y=0.3. At low temperatures, evidence of a contribution to S by an excitation-drag mechanism is found, while at high temperatures a strikingly flat behavior of S is explained within a narrow band Hubbard model. The support of a theoretical background which could provide band resolved parameters such as carrier density, mobility and electron-phonon coupling of each band would allow to extract from our data valuable quantitative information on the transport and superconducting mechanisms of these iron chalcogenides.

cond-mat.supr-con↗
arXiv2009

Transport and superconducting properties of Fe-based superconductors: SmFeAs(O1-x Fx) versus Fe1+y (Te1-x, Sex)

We present transport and superconducting properties - namely resistivity, magnetoresistivity, Hall effect, Seebeck effect, thermal conductivity, upper critical field - of two different families of Fe-based superconductors, which can be viewed in many respects as end members: SmFeAs(O1-xFx) with the largest Tc and the largest anisotropy and Fe1+y(Te1-x,Sex), with the largest Hc2, the lowest Tc and the lowest anisotropy. In the case of the SmFeAs(O1-xFx) series, we find that a single band description allows to extract an approximated estimation of band parameters such as carrier density and mobility from experimental data, although the behaviour of Seebeck effect as a function of doping demonstrates that a multiband description would be more appropriate. On the contrary, experimental data of the Fe1+y(Te1-x,Sex) series exhibit a strongly compensated behaviour, which can be described only within a multiband model. In the Fe1+y(Te1-x,Sex) series, the role of the excess Fe, tuned by Se stoichiometry, is found to be twofold: it dopes electrons in the system and it introduces localized magnetic moments, responsible for Kondo like scattering and likely pair-breaking of Cooper pairs. Hence, excess Fe plays a crucial role also in determining superconducting properties such as the Tc and the upper critical field Bc2. The huge Bc2 values of the Fe1+y(Te1-x,Sex) samples are described by a dirty limit law, opposed to the clean limit behaviour of the SmFeAs(O1-xFx) samples. Hence, magnetic scattering by excess Fe seems to drive the system in the dirty regime, but its detrimental pairbreaking role seems not to be as severe as predicted by theory. This issue has yet to be clarified, addressing the more fundamental issue of the interplay between magnetism and superconductivity.

cond-mat.supr-con↗
arXiv2009

Intrinsic ferromagnetic impurity phases in SmFeAsO1-xFx detected by muSR

We report about muSR measurements on SmFeAsO1-xFx which helped us to identify the signature of diluted ferromagnetic inclusions, ubiquitous in the iron pnictides. These impurities are characterized by a Curie temperature close to room temperature and they seem responsible for a non negligible magnetic relaxation of the implanted muons, that should not be confused with intrinsic pnictide properties.

cond-mat.supr-con↗
arXiv2009

First critical field measurements of superconducting films by third harmonic analysis

The temperature behaviour of the first critical field ($B_{C1}$) of superconducting thin film samples can be determined with high accuracy using an inductive and contactless method. Driving a sinusoidal current in a single coil placed in front of the sample, a non zero third harmonic voltage $V_{3}$ is induced in it when Abrikosov vortices enter the sample. Conditions to be satisfied for the quantitative evaluation of $B_{C1}$ using this technique are detailed. As validation test, different type II superconductors (Nb, NbN, MgB$_{2}$ and Y$_{1}$Ba$_{2}$Cu$_{3}$O$_{7-d}$ under the form of thin films) have been measured. The comparison between experimental results, data presented in literature and theoretical predictions is presented and discussed.

cond-mat.supr-con↗
arXiv2009

Magnetic-superconducting phase boundary of SmFeAsO$_{1-x}$F$_{x}$ studied via muon spin rotation: Unified behavior in a pnictide family

We present uSR investigations on SmFeAsO_1-xF_x showing coexistence of magnetic order and superconductivity only in a very narrow F-doping range. The sharp crossover between the two types of order is similar to that observed in LaFeAsO_1-xF_x, suggesting a common behavior for the 1111 pnictides. The analysis of the muon asymmetry demonstrates that the coexistence must be nanoscopic, i.e. the two phases must be finely interspersed over a typical length-scale of few nm. In this regime both the magnetic and the superconducting transition temperatures collapse to very low values. Our data suggest a competition between the two order parameters

cond-mat.supr-con↗
arXiv2009

Effect of the chemical pressure on superconductivity and SDW in undoped and 15%F doped La1-yYyFeAsO compounds

We present a study concerning the partial substitution of yttrium at the lanthanum site of the undoped LaFeAsO and superconducting LaFeAsO0.85F0.15 compounds. We prepared samples with a nominal yttrium content up to 70% producing simultaneous shrinkage of both the a- and c-lattice parameters by 1.8% and 1.7%, respectively. The chemical pressure provided by the partial substitution with this smaller ion size causes a lowering of the spin density wave temperature in the undoped compounds, as well as an increase of the superconducting transition temperatures in the doped ones. The 15% fluorine-doped samples reach a maximum critical temperature of 40.2 K for the 50% yttrium substitution. Comparison with literature data indicates that chemical pressure cannot be the only mechanism which tunes drastically both TSDW and Tc in 1111 compounds. Our data suggest that structural disorder induced by the partial substitution in the La site or by doping could play an important role as well.

cond-mat.supr-con↗
arXiv2006

Linear and nonlinear electrodynamic response of bulk CaC6 in the microwave regime

The linear and nonlinear response to a microwave electromagnetic field of two c-axis oriented polycrystalline samples of the newly discovered superconductor CaC6 (Tc = 11.5 K) is studied in the superconducting state down to 2 K. The surface resistance Rs and the third order intermodulation distortion, arising from a two-tone excitation, have been measured as a function of temperature and microwave circulating power. Experiments are carried out using a dielectrically loaded copper cavity operating at 7 GHz in a "hot finger" configuration. The results confirm recent experimental findings that CaC6 behaves as a weakly-coupled, fully gapped, superconductor. The weak power dependence of Rs encourages a further investigation of this novel superconductor as a possible alternative to Nb in specific microwave applications.

cond-mat.supr-con↗
arXiv2006

Microwave losses of bulk CaC6

We report a study of the temperature dependence of the surface resistance RS in the graphite intercalated compound (GIC) CaC6, where superconductivity at 11.5 K was recently discovered. Experiments are carried out using a copper dielectrically loaded cavity operating at 7 GHz in a "hot finger" configuration. Bulk CaC6 samples have been synthesized from highly oriented pyrolytic graphite. Microwave data allows to extract unique information on the quasiparticle density and on the nature of pairing in superconductors. The analysis of RS(T) confirms our recent experimental findings that CaC6 behaves as a weakly-coupled, fully gapped, superconductor.

cond-mat.supr-con↗
arXiv2006

Intrinsic nonlinearity probed by intermodulation distortion microwave measurements on high quality MgB2 thin films

The two tone intermodulation distortion arising in MgB2 thin films synthesized by hybrid physical-chemical vapour deposition is studied in order to probe the influence of the two bands on the nonlinear response of this superconductor. The measurements are carried out by using a dielectrically loaded copper cavity operating at 7 GHz. Microwave data on samples having critical temperatures above 41 K, very low resistivity values, and residual resistivity ratio larger than 10, are shown. The dependence of the nonlinear surface losses and of the third order intermodulation products on the power feeding the cavity and on the temperature is analyzed. At low power, the signal arising from distortion versus temperature shows the intrinsic s-wave behavior expected for this compound. Data are compared with measurements performed on Nb and YBCO thin films using the same technique.

cond-mat.supr-con↗
arXiv2006

Experimental evidence of s-wave superconductivity in bulk CaC$_{6}$

The temperature dependence of the in-plane magnetic penetration depth, $λ_{ab}(T)$, has been measured in a c-axis oriented polycrystalline CaC$_{6}$ bulk sample using a high-resolution mutual inductance technique. A clear exponential behavior of $λ_{ab}(T)$ has been observed at low temperatures, strongly suggesting isotropic s-wave pairing. Data fit using the standard BCS theory yields $λ_{ab}(0)=(720\pm 80)$ Angstroem and $Δ(0)=(1.79\pm 0.08)$ meV. The ratio $2Δ(0)/k_{_B}T_{c}=(3.6\pm 0.2)$ gives indication for a conventional weakly coupled superconductor.

cond-mat.supr-con↗
arXiv2005

Discrete model analysis of the critical current density measurements in superconducting thin films by a single coil inductive method

The critical current density of a superconducting film can be easily determined by an inductive and contactless method. Driving a sinusoidal current in a single coil placed in front of a superconducting sample, a non zero third harmonic voltage V_3 is induced in it when the sample goes beyond the Bean critical state. The onset of V_3 marks the value of current beyond which the sample response to the magnetic induction is no more linear. To take into account, in a realistic way, the magnetic coupling between the film and the coil we have developed a discrete model of the inducing and induced currents distribution. In the framework of this model the magnetic field profile on the sample surface and the coefficient linking the current flowing in the coil and the critical current density J_C of superconducting thin films is evaluated. The numerical results are checked measuring J_C of several thin films of YBa_2Cu_3O_(7-d) of known superconducting properties, used as a control material.

cond-mat.supr-con↗