arXiv subjects

G. Leuchs

Publications and source records attributed to G. Leuchs.

At least 37 records · Page 2Linked to original sources

arXiv2019

Properties of bright squeezed vacuum at increasing brightness

Bright squeezed vacuum (BSV) is a non-classical macroscopic state of light, which can be generated through high-gain parametric down-conversion or four-wave mixing. Although BSV is an important tool in quantum optics and has a lot of applications, its theoretical description is still not complete. In particular, the existing description in terms of Schmidt modes fails to explain the spectral broadening observed in experiment as the mean number of photons increases. On the other hand, the semi-classical description accounting for the broadening does not allow to decouple the intermodal photon-number correlations. In this work, we present a new generalized theoretical approach to describe the spatial properties of BSV. This approach is based on exchanging the $(\textbf{k},t)$ and $(ω,z)$ representations and solving a system of integro-differential equations. Our approach predicts correctly the dynamics of the Schmidt modes and the broadening of the spectrum with the increase in the BSV mean photon number due to a stronger pumping. Moreover, the model succesfully describes various properties of a widely used experimental configuration with two crystals and an air gap between them, namely an SU(1,1) interferometer. In particular, it predicts the narrowing of the intensity distribution, the reduction and shift of the side lobes, and the decline in the interference visibility as the mean photon number increases due to stronger pumping. The presented experimental results confirm the validity of the new approach. The model can be easily extended to the case of frequency spectrum, frequency Schmidt modes and other experimental configurations.

quant-ph↗

arXiv2019

Objective Compressive Quantum Process Tomography

We present a compressive quantum process tomography scheme that fully characterizes any rank-deficient completely-positive process with no a priori information about the process apart from the dimension of the system on which the process acts. It uses randomly-chosen input states and adaptive output von Neumann measurements. Both entangled and tensor-product configurations are flexibly employable in our scheme, the latter which naturally makes it especially compatible with many-body quantum computing. Two main features of this scheme are the certification protocol that verifies whether the accumulated data uniquely characterize the quantum process, and a compressive reconstruction method for the output states. We emulate multipartite scenarios with high-order electromagnetic transverse modes and optical fibers to positively demonstrate that, in terms of measurement resources, our assumption-free compressive strategy can reconstruct quantum processes almost equally efficiently using all types of input states and basis measurement operations, operations, independent of whether or not they are factorizable into tensor-product states.

quant-ph↗

arXiv2019

Adaptive compressive tomography: a numerical study

We perform several numerical studies for our recently published adaptive compressive tomography scheme [D. Ahn et al. Phys. Rev. Lett. 122, 100404 (2019)], which significantly reduces the number of measurement settings to unambiguously reconstruct any rank-deficient state without any a priori knowledge besides its dimension. We show that both entangled and product bases chosen by our adaptive scheme perform comparably well with recently-known compressed-sensing element-probing measurements, and also beat random measurement bases for low-rank quantum states. We also numerically conjecture asymptotic scaling behaviors for this number as a function of the state rank for our adaptive schemes. These scaling formulas appear to be independent of the Hilbert space dimension. As a natural development, we establish a faster hybrid compressive scheme that first chooses random bases, and later adaptive bases as the scheme progresses. As an epilogue, we reiterate important elements of informational completeness for our adaptive scheme.

quant-ph↗

arXiv2019

The Standard Quantum Limit of Coherent Beam Combining

Coherent beam combining refers to the process of generating a bright output beam by merging independent input beams with locked relative phases. We report the first quantum mechanical noise limit calculations for coherent beam combining and compare our results to quantum-limited amplification. Our coherent beam combining scheme is based on an optical Fourier transformation which renders the scheme compatible with integrated optics. The scheme can be layed out for an arbitrary number of input beams and approaches the shot noise limit for a large number of inputs.

quant-ph↗

arXiv2019

Adaptive compressive tomography with no a priori information

Quantum state tomography is both a crucial component in the field of quantum information and computation, and a formidable task that requires an incogitably large number of measurement configurations as the system dimension grows. We propose and experimentally carry out an intuitive adaptive compressive tomography scheme, inspired by the traditional compressed-sensing protocol in signal recovery, that tremendously reduces the number of configurations needed to uniquely reconstruct any given quantum state without any additional a priori assumption whatsoever (such as rank information, purity, etc) about the state, apart from its dimension.

quant-ph↗

arXiv2018

Compressed sensing of twisted photons

The ability to completely characterize the state of a quantum system is an essential element for the emerging quantum technologies. Here, we present a compressed-sensing inspired method to ascertain any rank-deficient qudit state, which we experimentally encode in photonic orbital angular momentum. We efficiently reconstruct these qudit states from a few scans with an intensified CCD camera. Since it requires only a few intensity measurements, our technique would provide an easy and accurate way to identify quantum sources, channels, and systems.

quant-ph↗

arXiv2018

The Wigner flow on the sphere

We derive a continuity equation for the evolution of the SU(2) Wigner function under nonlinear Kerr evolution. We give explicit expressions for the resulting quantum Wigner current, and discuss the appearance of the classical limit. We show that the global structure of the quantum current significantly differs from the classical one, which is clearly reflected in the form of the corresponding stagnation lines.

quant-ph↗

arXiv2017

Quantum metrology at the limit with extremal Majorana constellations

Quantum metrology allows for a tremendous boost in the accuracy of measurement of diverse physical parameters. The estimation of a rotation constitutes a remarkable example of this quantum-enhanced precision. The recently introduced Kings of Quantumness are especially germane for this task when the rotation axis is unknown, as they have a sensitivity independent of that axis and they achieve a Heisenberg-limit scaling. Here, we report the experimental realization of these states by generating up to 21-dimensional orbital angular momentum states of single photons, and confirm their high metrological abilities.

quant-ph↗

arXiv2017

Generation of continuous-variable cluster states of cylindrically polarized modes

Cluster states are an essential component in one-way quantum computation protocols. We present two schemes to generate addressable continuous-variable cluster states from quadrature squeezed cylindrically polarized modes. By including polarization in addition to the transverse spatial degree of freedom, elementary cluster states can be created in which four cluster nodes co-propagate within one paraxial vector beam. This approach is fundamentally compatible with existing time-multiplexed schemes that have been used to create the largest cluster states to date. We implement a proof-of-principle experiment of one of the proposed schemes and verify its feasibility by measuring the quantum correlations between the different nodes of the cluster state.

quant-ph↗

arXiv2016

Corrected knife-edge-based reconstruction of tightly focused higher order beams

The knife-edge method is an established technique for profiling of even tightly focused light beams. However the straightforward implementation of this method fails if the materials and geometry of the knife-edges are not chosen carefully or in particular if knife-edges are used that are made of pure materials. In these cases artifacts are introduced in the shape and position of the reconstructed beam profile due to the interaction of the light beam under study with the knife. Hence, corrections to the standard knife-edge evaluation method are required. Here we investigate the knife-edge method for highly focused radially and azimuthally polarized beams and their linearly polarized constituents. We introduce relative shifts for those constituents and report on the consistency with the case of a linearly polarized Gaussian beam. An adapted knife-edge reconstruction technique is presented and proof-of-concept tests demonstrating the reconstruction of beam profiles are shown.

physics.optics↗

arXiv2016

Influence of the substrate material on the knife-edge based profiling of tightly focused light beams

The performance of the knife-edge method as a beam profiling technique for tightly focused light beams depends on several parameters, such as the material and height of the knife-pad as well as the polarization and wavelength of the focused light beam under study. Here we demonstrate that the choice of the substrate the knife-pads are fabricated on has a crucial influence on the reconstructed beam projections as well. We employ an analytical model for the interaction of the knife-pad with the beam and report good agreement between our numerical and experimental results. Moreover, we simplify the analytical model and demonstrate, in which way the underlying physical effects lead to the apparent polarization dependent beam shifts and changes of the beamwidth for different substrate materials and heights of the knife-pad.

physics.optics↗

arXiv2015

Parsing Squeezed Light into Polarization Manifolds

We investigate polarization squeezing in squeezed coherent states with varying coherent amplitudes. In contrast to the traditional characterization based on the full Stokes parameters, we experimentally determine the Stokes vector of each excitation manifold separately. Only for states with a fixed photon number do the methods coincide; when the photon number is indefinite, our approach gives a richer and deeper description. By capitalising on the properties of the Husimi Q function, we map this notion onto the Poincare space, providing a full account of the measured squeezing.

quant-ph↗

arXiv2015

Extremal quantum states and their Majorana constellations

The characterization of quantum polarization of light requires knowledge of all the moments of the Stokes variables, which are appropriately encoded in the multipole expansion of the density matrix. We look into the cumulative distribution of those multipoles and work out the corresponding extremal pure states. We find that SU(2) coherent states are maximal to any order whereas the converse case of minimal states (which can be seen as the most quantum ones) is investigated for a diverse range of the number of photons. Taking advantage of the Majorana representation, we recast the problem as that of distributing a number of points uniformly over the surface of the Poincare sphere.

quant-ph↗

arXiv2015

Projective filtering of a single spatial radiation eigenmode

Lossless filtering of a single coherent (Schmidt) mode from spatially multimode radiation is a problem crucial for optics in general and for quantum optics in particular. It becomes especially important in the case of nonclassical light that is fragile to optical losses. An example is bright squeezed vacuum generated via high-gain parametric down conversion or four-wave mixing. Its highly multiphoton and multimode structure offers a huge increase in the information capacity provided that each mode can be addressed separately. However, the nonclassical signature of bright squeezed vacuum, photon-number correlations, are highly susceptible to losses. Here we demonstrate lossless filtering of a single spatial Schmidt mode by projecting the spatial spectrum of bright squeezed vacuum on the eigenmode of a single-mode fiber. Moreover, we show that the first Schmidt mode can be captured by simply maximizing the fiber-coupled intensity. Importantly, the projection operation does not affect the targeted mode and leaves it usable for further applications.

quant-ph↗

arXiv2015

Nonlinear interferometer for tailoring the frequency spectrum of bright squeezed vacuum

We propose a method for tailoring the frequency spectrum of bright squeezed vacuum by generating it in a nonlinear interferometer, consisting of two down-converting nonlinear crystals separated by a dispersive medium. Due to a faster dispersive spreading of higher-order Schmidt modes, the spectral width of the radiation at the output is reduced as the length of the dispersive medium is increased. Preliminary results show 30\% spectral narrowing.

quant-ph↗

arXiv2014

Extremal states for photon number and quadratures as gauges for nonclassicality

Rotated quadratures carry the phase-dependent information of the electromagnetic field, so they are somehow conjugate to the photon number. We analyze this noncanonical pair, finding an exact uncertatinty relation, as well as a couple of weaker inequalities obtained by relaxing some restrictions of the problem. We also find the intelligent states saturating that relation and complete their characterization by considering extra constraints on the second-order moments of the variables involved. Using these moments, we construct performance measures tailored to diagnose photon-added and Schrödinger catlike states, among others.

quant-ph↗

arXiv2014

Practical implementation of mutually unbiased bases using quantum circuits

The number of measurements necessary to perform the quantum state reconstruction of a system of qubits grows exponentially with the number of constituents, creating a major obstacle for the design of scalable tomographic schemes. We work out a simple and efficient method based on cyclic generation of mutually unbiased bases. The basic generator requires only Hadamard and controlled-phase gates, which are available in most practical realizations of these systems. We show how complete sets of mutually unbiased bases with different entanglement structures can be realized for three and four qubits. We also analyze the quantum circuits implementing the various entanglement classes.

quant-ph↗

arXiv2014

Generation of entangled matter qubits in two opposing parabolic mirrors

We propose a scheme for the remote preparation of entangled matter qubits in free space. For this purpose, a setup of two opposing parabolic mirrors is considered, each one with a single ion trapped at its focus. To get the required entanglement in this extreme multimode scenario, we take advantage of the spontaneous decay, which is usually considered as an apparent nuisance. Using semiclassical methods, we derive an efficient photon-path representation to deal with this problem. We also present a thorough examination of the experimental feasibility of the scheme. The vulnerabilities arising in realistic implementations reduce the success probability, but leave the fidelity of the generated state unaltered. Our proposal thus allows for the generation of high-fidelity entangled matter qubits with high rate.

quant-ph↗