arXiv subjects

G. M. Seabroke

Publications and source records attributed to G. M. Seabroke.

At least 55 records · Page 3Linked to original sources

arXiv2016

Local Stellar Kinematics from RAVE data - VII. Metallicity Gradients from Red Clump Stars

We investigate the Milky Way Galaxy's radial and vertical metallicity gradients using a sample of 47,406 red clump stars from the RAVE DR4. This sample is more than twice the size of the largest sample in the literature investigating radial and vertical metallicity gradients. The absolute magnitude of Groenewegen (2008) is used to determine distances to our sample stars. The resulting distances agree with the RAVE DR4 distances Binney et al. (2014) of the same stars. Our photometric method also provides distances to 6185 stars that are not assigned a distance in RAVE DR4. The metallicity gradients are calculated with their current orbital positions ($R_{gc}$ and $Z$) and with their orbital properties (mean Galactocentric distance, $R_{m}$ and $z_{max}$), as a function of the distance to the Galactic plane: d[Fe/H]/d$R_{gc}=$-$0.047\pm0.003$ dex/kpc for $0\leq |Z|\leq0.5$ kpc and d[Fe/H]/d$R_m=$-$0.025\pm0.002$ dex/kpc for $0\leq z_{max}\leq0.5$ kpc. This reaffirms the radial metallicity gradient in the thin disc but highlights that gradients are sensitive to the selection effects caused by the difference between $R_{gc}$ and $R_{m}$. The radial gradient is flat in the distance interval 0.5-1 kpc from the plane and then becomes positive greater than 1 kpc from the plane. The radial metallicity gradients are also eccentricity dependent. We showed that d[Fe/H]/d$R_m=$-$0.089\pm0.010$, -$0.073\pm0.007$, -$0.053\pm0.004$ and -$0.044\pm0.002$ dex/kpc for $e_p\leq0.05$, $e_p\leq0.07$, $e_p\leq0.10$ and $e_p\leq0.20$ sub-samples, respectively, in the distance interval $0\leq z_{max}\leq0.5$ kpc. Similar trend is found for vertical metallicity gradients. Both the radial and vertical metallicity gradients are found to become shallower as the eccentricity of the sample increases. These findings can be used to constrain different formation scenarios of the thick and thin discs.

astro-ph.GA↗

arXiv2014

Weighing the local dark matter with RAVE red clump stars

We determine the Galactic potential in the solar neigbourhood from RAVE observations. We select red clump stars for which accurate distances, radial velocities, and metallicities have been measured. Combined with data from the 2MASS and UCAC catalogues, we build a sample of 4600 red clump stars within a cylinder of 500 pc radius oriented in the direction of the South Galactic Pole, in the range of 200 pc to 2000 pc distances. We deduce the vertical force and the total mass density distribution up to 2 kpc away from the Galactic plane by fitting a distribution function depending explicitly on three isolating integrals of the motion in a separable potential locally representing the Galactic one with four free parameters. Because of the deep extension of our sample, we can determine nearly independently the dark matter mass density and the baryonic disc surface mass density. We find (i) at 1kpc Kz/(2piG) = 68.5 pm 1.0 Msun/pc2, and (ii) at 2 kpc Kz/(2piG) = 96.9 pm 2.2 Msun/pc2. Assuming the solar Galactic radius at R0 = 8.5 kpc, we deduce the local dark matter density rhoDM (z=0) = 0.0143 pm 0.0011Msun pc3 = 0.542 pm 0.042 Gev/cm3 and the baryonic surface mass density Sigma = 44.4 pm 4.1 Msun/pc2 . Our results are in agreement with previously published Kz determinations up to 1 kpc, while the extension to 2 kpc shows some evidence for an unexpectedly large amount of dark matter. A flattening of the dark halo of order 0.8 can produce such a high local density in combination with a circular velocity of 240 km/s . Another explanation, allowing for a lower circular velocity, could be the presence of a secondary dark component, a very thick disc resulting either from the deposit of dark matter from the accretion of multiple small dwarf galaxies, or from the presence of an effective phantom thick disc in the context of effective galactic-scale modifications of gravity.

astro-ph.GA↗

arXiv2014

APASS Landolt-Sloan BVgri photometry of RAVE stars. I. Data, effective temperatures and reddenings

We provide APASS photometry in the Landolt BV and Sloan g'r'i' bands for all the 425,743 stars included in the latest 4th RAVE Data Release. The internal accuracy of the APASS photometry of RAVE stars, expressed as error of the mean of data obtained and separately calibrated over a median of 4 distinct observing epochs and distributed between 2009 and 2013, is 0.013, 0.012, 0.012, 0.014 and 0.021 mag for B, V, g', r' and i' band, respectively. The equally high external accuracy of APASS photometry has been verified on secondary Landolt and Sloan photometric standard stars not involved in the APASS calibration process, and on a large body of literature data on field and cluster stars, confirming the absence of offsets and trends. Compared with the Carlsberg Meridian Catalog (CMC-15), APASS astrometry of RAVE stars is accurate to a median value of 0.098 arcsec. Brightness distribution functions for the RAVE stars have been derived in all bands. APASS photometry of RAVE stars, augmented by 2MASS JHK infrared data, has been chi2 fitted to a densely populated synthetic photometric library designed to widely explore in temperature, surface gravity, metallicity and reddening. Resulting Teff and E(B-V), computed over a range of options, are provided and discussed, and will be kept updated in response to future APASS and RAVE data releases. In the process it is found that the reddening caused by an homogeneous slab of dust, extending for 140 pc on either side of the Galactic plane and responsible for E(B-V,poles)=0.036 +/- 0.002 at the galactic poles, is a suitable approximation of the actual reddening encountered at Galactic latitudes |b|>=25 deg.

astro-ph.SR↗

arXiv2014

Chemical gradients in the Milky Way from the RAVE data. II. Giant stars

We provide new constraints on the chemo-dynamical models of the Milky Way by measuring the radial and vertical chemical gradients for the elements Mg, Al, Si, Ti, and Fe in the Galactic disc and the gradient variations as a function of the distance from the Galactic plane ($Z$). We selected a sample of giant stars from the RAVE database using the gravity criterium 1.7$<$log g$<$2.8. We created a RAVE mock sample with the Galaxia code based on the Besan\c con model and selected a corresponding mock sample to compare the model with the observed data. We measured the radial gradients and the vertical gradients as a function of the distance from the Galactic plane $Z$ to study their variation across the Galactic disc. The RAVE sample exhibits a negative radial gradient of $d[Fe/H]/dR=-0.054$ dex kpc$^{-1}$ close to the Galactic plane ($|Z|<0.4$ kpc) that becomes flatter for larger $|Z|$. Other elements follow the same trend although with some variations from element to element. The mock sample has radial gradients in fair agreement with the observed data. The variation of the gradients with $Z$ shows that the Fe radial gradient of the RAVE sample has little change in the range $|Z|\lesssim0.6$ kpc and then flattens. The iron vertical gradient of the RAVE sample is slightly negative close to the Galactic plane and steepens with $|Z|$. The mock sample exhibits an iron vertical gradient that is always steeper than the RAVE sample. The mock sample also shows an excess of metal-poor stars in the [Fe/H] distributions with respect to the observed data. These discrepancies can be reduced by decreasing the number of thick disc stars and increasing their average metallicity in the Besan\c con model.

astro-ph.GA↗

arXiv2014

Kinematic modelling of the Milky Way using the RAVE and GCS stellar surveys

We investigate the kinematic parameters of the Milky Way disc using the RAVE and GCS stellar surveys. We do this by fitting a kinematic model to the data taking the selection function of the data into account. For stars in the GCS we use all phase-space coordinates, but for RAVE stars we use only $(l,b,v_{\rm los})$. Using MCMC technique, we investigate the full posterior distributions of the parameters given the data. We investigate the `age-velocity dispersion' relation for the three kinematic components ($σ_R,σ_ϕ,σ_z$), the radial dependence of the velocity dispersions, the Solar peculiar motion ($U_{\odot},V_{\odot}, W_{\odot} $), the circular speed $Θ_0$ at the Sun and the fall of mean azimuthal motion with height above the mid-plane. We confirm that the Besançon-style Gaussian model accurately fits the GCS data, but fails to match the details of the more spatially extended RAVE survey. In particular, the Shu distribution function (DF) handles non-circular orbits more accurately and provides a better fit to the kinematic data. The Gaussian distribution function not only fits the data poorly but systematically underestimates the fall of velocity dispersion with radius. We find that correlations exist between a number of parameters, which highlights the importance of doing joint fits. The large size of the RAVE survey, allows us to get precise values for most parameters. However, large systematic uncertainties remain, especially in $V_{\odot}$ and $Θ_0$. We find that, for an extended sample of stars, $Θ_0$ is underestimated by as much as $10\%$ if the vertical dependence of the mean azimuthal motion is neglected. Using a simple model for vertical dependence of kinematics, we find that it is possible to match the Sgr A* proper motion without any need for $V_{\odot}$ being larger than that estimated locally by surveys like GCS.

astro-ph.GA↗

arXiv2013

Chemical gradients in the Milky Way from the RAVE data. I. Dwarf stars

Aim: We aim at measuring the chemical gradients of the elements Mg, Al, Si, and Fe along the Galactic radius to provide new constraints on the chemical evolution models of the Galaxy and Galaxy models such as the Besancon model. Methods: We analysed three different samples selected from three independent datasets: a sample of 19,962 dwarf stars selected from the RAVE database, a sample of 10,616 dwarf stars selected from the Geneva-Copenhagen Survey (GCS) dataset, and a mock sample (equivalent to the RAVE sample) created by using the GALAXIA code, which is based on the Besancon model. We measured the chemical gradients as functions of the guiding radius (Rg) at different distances from the Galactic plane reached by the stars along their orbit (Zmax). Results: The chemical gradients of the RAVE and GCS samples are negative and show consistent trends, although they are not equal: at Zmax<0.4 kpc and 4.5<Rg(kpc)<9.5, the iron gradient for the RAVE sample is d[Fe/H]/dRg=-0.065 dex kpc^{-1}, whereas for the GCS sample it is d[Fe/H]/dRg=-0.043 dex kpc^{-1} with internal errors +-0.002 and +-0.004 dex kpc^{-1}, respectively. The gradients of the RAVE and GCS samples become flatter at larger Zmax. Conversely, the mock sample has a positive iron gradient of d[Fe/H]/dRg=+0.053+-0.003 dex kpc^{-1} at Zmax<0.4 kpc and remains positive at any Zmax. These positive and unrealistic values originate from the lack of correlation between metallicity and tangential velocity in the Besancon model. The discrepancies between the observational samples and the mock sample can be reduced by i) decreasing the density, ii) decreasing the vertical velocity, and iii) increasing the metallicity of the thick disc in the Besancon model.

astro-ph.GA↗

arXiv2013

The RAdial Velocity Experiment (RAVE): Fourth data release

We present the stellar atmospheric parameters (effective temperature, surface gravity, overall metallicity), radial velocities, individual abundances and distances determined for 425 561 stars, which constitute the fourth public data release of the RAdial Velocity Experiment (RAVE). The stellar atmospheric parameters are computed using a new pipeline, based on the algorithms of MATISSE and DEGAS. The spectral degeneracies and the 2MASS photometric information are now better taken into consideration, improving the parameter determination compared to the previous RAVE data releases. The individual abundances for six elements (magnesium, aluminum, silicon, titanium, iron and nickel) are also given, based on a special-purpose pipeline which is also improved compared to that available for the RAVE DR3 and Chemical DR1 data releases. Together with photometric information and proper motions, these data can be retrieved from the RAVE collaboration website and the Vizier database.

astro-ph.GA↗

arXiv2013

The wobbly Galaxy: kinematics north and south with RAVE red clump giants

The RAVE survey, combined with proper motions and distance estimates, can be used to study in detail stellar kinematics in the extended solar neighbourhood (solar suburb). Using the red clump, we examine the mean velocity components in 3D between an R of 6 and 10 kpc and a Z of -2 to 2 kpc, concentrating on North-South differences. Simple parametric fits to the R, Z trends for VPHI and the velocity dispersions are presented. We confirm the recently discovered gradient in mean Galactocentric radial velocity, VR, finding that the gradient is more marked below the plane, with a Z gradient also present. The vertical velocity, VZ, also shows clear structure, with indications of a rarefaction-compression pattern, suggestive of wave-like behaviour. We perform a rigorous error analysis, tracing sources of both systematic and random errors. We confirm the North-South differences in VR and VZ along the line-of-sight, with the VR estimated independent of the proper motions. The complex three-dimensional structure of velocity space presents challenges for future modelling of the Galactic disk, with the Galactic bar, spiral arms and excitation of wave-like structures all probably playing a role.

astro-ph.GA↗

arXiv2013

Kinematic groups beyond the Solar neighbourhood with RAVE

We analyse the kinematics of disc stars observed by the RAVE survey in and beyond the Solar neighbourhood.We detect significant overdensities in the velocity distributions using a technique based on the wavelet transform.We find that the main local kinematic groups are large scale features, surviving at least up to ~1 kpc from the Sun in the direction of anti-rotation, and also at ~700 pc below the Galactic plane.We also find that for regions located at different radii than the Sun, the known groups appear shifted in the velocity plane. For example, the Hercules group has a larger azimuthal velocity for regions inside the Solar circle and a lower value outside. We have also discovered a new group at (U, V) = (92,-22) km/s in the Solar neighbourhood and confirmed the significance of other previously found groups. Some of these trends detected for the first time are consistent with dynamical models of the effects of the bar and the spiral arms. More modelling is required to definitively characterise the non-axisymmetric components of our Galaxy using these groups.

astro-ph.GA↗

arXiv2013

The relation between chemical abundances and kinematics of the Galactic disc with RAVE

Aims: We study the relations between stellar kinematics and chemical abundances of a large sample of RAVE giants in search for selection criteria needed for disentangling different Galactic stellar populations. Methods: We select a sample of 2167 giant stars with signal-to-noise per spectral measurements above 75 from the RAVE chemical catalogue and follow the analysis performed by Gratton and colleagues on 150 subdwarf stars spectroscopically observed at high-resolution. We then use a larger sample of 9131 giants (with signal-to-noise above 60) to investigate the chemo-kinematical characteristics of our stars by grouping them into nine subsamples with common eccentricity ($e$) and maximum distance achieved above the Galactic plane ($Z_max$). Results: The RAVE kinematical and chemical data proved to be reliable by reproducing the results by Gratton et al. obtained with high-resolution spectroscopic data. Our analysis, based on the $e$-$Z_max$ plane combined with additional orbital parameters and chemical information, provides an alternative way of identifying different populations of stars. In addition to extracting canonical thick- and thin-disc samples, we find a group of stars in the Galactic plane ($Z_max<1$ kpc and 0.4 $< e < $0.6), which show homogeneous kinematics but differ in their chemical properties. We interpret this as a clear sign that some of these stars have experienced the effects of heating and/or radial migration, which have modified their original orbits. The accretion origin of such stars cannot be excluded.

astro-ph.GA↗

arXiv2013

Digging supplementary buried channels: investigating the notch architecture within the CCD pixels on ESA's Gaia satellite

The European Space Agency (ESA) Gaia satellite has 106 CCD image sensors which will suffer from increased charge transfer inefficiency (CTI) as a result of radiation damage. To aid the mitigation at low signal levels, the CCD design includes Supplementary Buried Channels (SBCs, otherwise known as `notches') within each CCD column. We present the largest published sample of Gaia CCD SBC Full Well Capacity (FWC) laboratory measurements and simulations based on 13 devices. We find that Gaia CCDs manufactured post-2004 have SBCs with FWCs in the upper half of each CCD that are systematically smaller by two orders of magnitude (<50 electrons) compared to those manufactured pre-2004 (thousands of electrons). Gaia's faint star (13 < G < 20 mag) astrometric performance predictions by Prod'homme et al. and Holl et al. use pre-2004 SBC FWCs as inputs to their simulations. However, all the CCDs already integrated onto the satellite for the 2013 launch are post-2004. SBC FWC measurements are not available for one of our five post-2004 CCDs but the fact it meets Gaia's image location requirements suggests it has SBC FWCs similar to pre-2004. It is too late to measure the SBC FWCs onboard the satellite and it is not possible to theoretically predict them. Gaia's faint star astrometric performance predictions depend on knowledge of the onboard SBC FWCs but as these are currently unavailable, it is not known how representative of the whole focal plane the current predictions are. Therefore, we suggest Gaia's initial in-orbit calibrations should include measurement of the onboard SBC FWCs. We present a potential method to do this. Faint star astrometric performance predictions based on onboard SBC FWCs at the start of the mission would allow satellite operating conditions or CTI software mitigation to be further optimised to improve the scientific return of Gaia.

astro-ph.IM↗

arXiv2012

Local stellar kinematics from RAVE data: III. Radial and Vertical Metallicity Gradients based on Red Clump Stars

We investigate radial and vertical metallicity gradients for a sample of red clump stars from the RAdial Velocity Experiment (RAVE) Data Release 3. We select a total of 6781 stars, using a selection of colour, surface gravity and uncertainty in the derived space motion, and calculate for each star a probabilistic (kinematic) population assignment to a thin or thick disc using space motion and additionally another (dynamical) assignment using stellar vertical orbital eccentricity. We derive almost equal metallicity gradients as a function of Galactocentric distance for the high probability thin disc stars and for stars with vertical orbital eccentricities consistent with being dynamically young, e_v<=0.07, i.e. d[M/H]/dR_m = -0.041(0.003) and d[M/H]/dR_m = -0.041(0.007) dex/kpc. Metallicity gradients as a function of distance from the Galactic plane for the same populations are steeper, i.e. d[M/H]/dz_{max} = -0.109(0.008) and d[M/H]/dz_{max} = -0.260(0.031) dex/kpc, respectively. R_m and z_{max} are the arithmetic mean of the perigalactic and apogalactic distances, and the maximum distance to the Galactic plane, respectively. Samples including more thick disc red clump giant stars show systematically shallower abundance gradients. These findings can be used to distinguish between different formation scenarios of the thick and thin discs.

astro-ph.GA↗

arXiv2011

Local stellar kinematics from RAVE data: II. Radial Metallicity Gradient

We investigate radial metallicity gradients for a sample of dwarf stars from the RAdial Velocity Experiment (RAVE) Data Release 3 (DR3). We select a total of approximately 17000 F-type and G-type dwarfs using selection of colour, log g, and uncertainty on derived space motion, calculate for each star a probabilistic (kinematic) population assignment to thick or thin disc using space motion, and additionally another (dynamical) assignment using stellar vertical orbital eccentricity. We additionally subsample by colour, to provide samples biased to young thin disc and to older thin disc stars. We derive a metallicity gradient as a function of Galactocentric radial distance, i.e. d[M/H]/dR_m=-0.051+/-0.005 dex kpc^-1, for the youngest sample, F-type stars with vertical orbital eccentricities e_V<=0.04. Samples biased to older thin disc stars show systematically shallower abundance gradients.

astro-ph.GA↗

arXiv2011

The RAVE catalogue of stellar elemental abundances: first data release

We present chemical elemental abundances for $36,561$ stars observed by the RAdial Velocity Experiment (RAVE), an ambitious spectroscopic survey of our Galaxy at Galactic latitudes $|$b$|>25^{\circ}$ and with magnitudes in the range 9$<I_{DENIS}<$13. RAVE spectra cover the Ca-triplet region at 8410--8795Å with resolving power R$\sim$7500. This first data release of the RAVE chemical catalogue is complementary to the third RAVE data release of radial velocities and stellar parameters, and it contains chemical abundances for the elements Mg, Al, Si, Ca, Ti, Fe and Ni, with a mean error of $\sim$0.2 dex, as judged from accuracy tests performed on synthetic and real spectra. Abundances are estimated through a dedicated processing pipeline in which the curve of growth of individual lines is obtained from a library of absorption-line equivalent widths to construct a model spectrum that is then matched to the observed spectrum via a $χ^2$-minimization technique. We plan to extend this pipeline to include estimates for other elements, such as oxygen and sulfur, in future data releases.

astro-ph.GA↗

arXiv2011

Identification of field dwarfs and giants in RAVE

The second RAdial Velocity Experiment (RAVE) Data Release (DR2) derives log g values but we present a simpler and cleaner method of identifying dwarfs and giants using only magnitudes, which does not require spectroscopic analysis. We confirm the Bilir et al. (2006) procedure which estimates the number of dwarfs and giants via their positions in the J-V two magnitude diagram by applying it to RAVE DR2. It is effective in estimating the number of dwarfs and giants at J-H>0.4 compared to RAVE's log g values. For J-H<=0.4, where dwarfs and subgiants show a continuous transition in the J magnitude histogram, we used the Besancon Galaxy model predictions to statistically isolate giants. The percentages of giants for red stars and for the whole sample are 85% and 34%, respectively. If we add the subgiants, the percentage of evolved stars for the whole sample raises to 59%. For the first time in the literature, we analysed the effect of CHISQ on RAVE's log g values (CHISQ is the penalised chi^2 from RAVE's technique of finding an optimal match between the observed spectrum and synthetic spectra to derive stellar parameters). Neither the CHISQ values nor the signal-to-noise ratio bias RAVE log g values. Therefore the method of identifying dwarfs and giants via the two magnitude diagram has been verified against an unbiased dataset.

astro-ph.GA↗

arXiv2011

Distance determination for RAVE stars using stellar models III: The nature of the RAVE survey and Milky Way chemistry

We apply the method of Burnett & Binney (2010) for the determination of stellar distances and parameters to the internal catalogue of the Radial Velocity Experiment (Steinmetz et al. 2006). Subsamples of stars that either have Hipparcos parallaxes or belong to well-studied clusters, inspire confidence in the formal errors. Distances to dwarfs cooler than ~6000 K appear to be unbiased, but those to hotter dwarfs tend to be too small by ~10% of the formal errors. Distances to giants tend to be too large by about the same amount. The median distance error in the whole sample of 216,000 stars is 28% and the error distribution is similar for both giants and dwarfs. Roughly half the stars in the RAVE survey are giants. The giant fraction is largest at low latitudes and in directions towards the Galactic Centre. Near the plane the metallicity distribution is remarkably narrow and centred on [M/H]-0.04 dex; with increasing |z| it broadens out and its median moves to [M/H] ~ -0.5. Mean age as a function of distance from the Galactic centre and distance |z| from the Galactic plane shows the anticipated increase in mean age with |z|.

astro-ph.GA↗

arXiv2011

Single-lined Spectroscopic Binary Star Candidates in the RAVE Survey

Repeated spectroscopic observations of stars in the Radial Velocity Experiment (RAVE) database are used to identify and examine single-lined binary (SB1) candidates. The RAVE latest internal database (VDR3) includes radial velocities, atmospheric and other parameters for approximately quarter million of different stars with little less than 300,000 observations. In the sample of ~20,000 stars observed more than once, 1333 stars with variable radial velocities were identified. Most of them are believed to be SB1 candidates. The fraction of SB1 candidates among stars with several observations is between 10% and 15% which is the lower limit for binarity among RAVE stars. Due to the distribution of time spans between the re-observation that is biased towards relatively short timescales (days to weeks), the periods of the identified SB1 candidates are most likely in the same range. Because of the RAVE's narrow magnitude range most of the dwarf candidates belong to the thin Galactic disk while the giants are part of the thick disk with distances extending to up to a few kpc. The comparison of the list of SB1 candidates to the VSX catalog of variable stars yielded several pulsating variables among the giant population with the radial velocity variations of up to few tens of km/s. There are 26 matches between the catalog of spectroscopic binary orbits (SB9) and the whole RAVE sample for which the given periastron time and the time of RAVE observation were close enough to yield a reliable comparison. RAVE measurements of radial velocities of known spectroscopic binaries are consistent with their published radial velocity curves.

astro-ph.SR↗

arXiv2011

The RAdial Velocity Experiment (RAVE): Third Data Release

We present the third data release of the RAdial Velocity Experiment (RAVE) which is the first milestone of the RAVE project, releasing the full pilot survey. The catalog contains 83,072 radial velocity measurements for 77,461 stars in the southern celestial hemisphere, as well as stellar parameters for 39,833 stars. This paper describes the content of the new release, the new processing pipeline, as well as an updated calibration for the metallicity based upon the observation of additional standard stars. Spectra will be made available in a future release. The data release can be accessed via the RAVE webpage: http://www.rave-survey.org.

astro-ph.GA↗