SearcharxivSearch

arXiv subjects

G. Marchiori

Publications and source records attributed to G. Marchiori.

13 recordsLinked to original sources

The ASTRI Cherenkov Camera: from the prototype to the industrial version for the Mini-Array

The observation of energetic astronomical sources emitting very high-energy gamma-rays in the TeV spectral range (as e.g. supernova remnants or blazars) is mainly based on detecting the Cherenkov light induced by relativistic particles in the showers produced by the photon interaction with the Earth atmosphere. The ASTRI Mini-Array is an INAF-led project aimed observing such celestial objects in the 1 - 100 TeV energy range. It consists of an array of nine innovative imaging atmospheric Cherenkov telescopes that are an evolution of the dual-mirror aplanatic ASTRI-Horn telescope operating at the INAF "M.C. Fracastoro" observing station (Serra La Nave, Mount Etna, Italy). The ASTRI Mini-Array is currently under construction at the Observatorio del Teide (Tenerife, Spain). In this paper, we present the compact (diameter 660mm, height 520mm, weight 73kg) ASTRI-Horn prototype Cherenkov Camera based on a modular multipixel Silicon Photon Multiplier (SiPM) detector, has been acquiring data since 2016 and allowing us to obtain both scientific data and essential lessons. In this contribution, we report the main features of the camera and its evolution toward the new Cherenkov camera, which will be installed on each ASTRI Mini-Array telescope to cover an unprecedented field of view of 10.5{\deg}.

astro-ph.IM

LPNHE scientific perspectives for the European Strategy for Particle Physics

This note summarizes the activities and the scientific and technical perspectives of the Laboratoire de Physique Nucleaire et de Hautes Energies (LPNHE) at Sorbonne University, Paris. Although the ESPP is specifically aimed at particle physics, we discuss in this note in parallel the three scientific lines developed at LPNHE (Particle Physics, Astroparticles, Cosmology), first with the current scientific activities, then for the future activities. However, our conclusions and recommendations are focused on the particle physics strategy.

hep-ph

Performance of Thin Planar \textit{n-on-p} silicon pixels after HL-LHC radiation fluences

The tracking detector of ATLAS, one of the experiments at the Large Hadron Collider (LHC), will be upgraded in 2024-2026 to cope with the challenging environment conditions of the High Luminosity LHC (HL-LHC). The LPNHE, in collaboration with FBK and INFN, has produced 130~$\mu$m thick $n-on-p$ silicon pixel sensors which can withstand the expected large particle fluences at HL- LHC, while delivering data at high rate with excellent hit efficiency. Such sensors were tested on beam before and after irradiation both at CERN-SPS and at DESY, and their performances are presented in this paper. Beam test data indicate that these detectors are suited for all the layers where planar sensors are foreseen in the future ATLAS tracker: hit-efficiency is greater than 97\% for fluences $\Phi \lesssim 7\times10^{15}\rm{n_{eq}/cm^2}$ and module power consumption is within the specified limits. Moreover, at a fluence $\Phi = 1.3\times10^{16}\rm{n_{eq}/cm^2}$, hit-efficiency is still as high as 88\% and charge collection efficiency is about 30\%.

physics.ins-det

Beam test measurements of Low Gain Avalanche Detector single pads and arrays for the ATLAS High Granularity Timing Detector

For the high luminosity upgrade of the LHC at CERN, ATLAS is considering the addition of a High Granularity Timing Detector (HGTD) in front of the end cap and forward calorimeters at |z| = 3.5 m and covering the region 2.4 < |{\eta}| < 4 to help reducing the effect of pile-up. The chosen sensors are arrays of 50 {\mu}m thin Low Gain Avalanche Detectors (LGAD). This paper presents results on single LGAD sensors with a surface area of 1.3x1.3 mm2 and arrays with 2x2 pads with a surface area of 2x2 mm^2 or 3x3 mm^2 each and different implant doses of the p+ multiplication layer. They are obtained from data collected during a beam test campaign in Autumn 2016 with a pion beam of 120 GeV energy at the CERN SPS. In addition to several quantities measured inclusively for each pad, the gain, efficiency and time resolution have been estimated as a function of the position of the incident particle inside the pad by using a beam telescope with a position resolution of few {\mu}m. Different methods to measure the time resolution are compared, yielding consistent results. The sensors with a surface area of 1.3x1.3 mm^2 have a time resolution of about 40 ps for a gain of 20 and of about 27 ps for a gain of 50 and fulfill the HGTD requirements. Larger sensors have, as expected, a degraded time resolution. All sensors show very good efficiency and time resolution uniformity.

physics.ins-det

Development of Edgeless Silicon Pixel Sensors on p-type substrate for the ATLAS High-Luminosity Upgrade

In view of the LHC upgrade for the High Luminosity Phase (HL-LHC), the ATLAS experiment is planning to replace the Inner Detector with an all-Silicon system. The n-in-p bulk technology represents a valid solution for the modules of most of the layers, given the significant radiation hardness of this option and the reduced cost. The large area necessary to instrument the outer layers will demand to tile the sensors, a solution for which the inefficient region at the border of each sensor needs to be reduced to the minimum size. This paper reports on a joint R&D project by the ATLAS LPNHE Paris group and FBK Trento on a novel n-in-p edgeless planar pixel design, based on the deep-trench process available at FTK.

physics.ins-det

Sensitivity of the LHC isolated-gamma+jet data to the parton distribution functions of the proton

We study the impact of differential isolated-photon+jet cross sections measured in proton-proton collisions at a center-of-mass energy of sqrt{s} = 7 TeV on the parton distribution functions (PDF) of the proton. Next-to-leading order perturbative QCD (pQCD) calculations complemented with the NNPDF2.1 parton densities, and a Bayesian PDF reweighting method are employed. We find that although the current data provide only mild constraints to the parton densities, future gamma-jet measurements with reduced experimental uncertainties can improve our knowledge of the gluon density over a wide range of parton fractional momenta x as well as of the quarks at low-x.

hep-ph

Planar Pixel Sensors for the ATLAS Upgrade: Beam Tests results

Results of beam tests with planar silicon pixel sensors aimed towards the ATLAS Insertable B-Layer and High Luminosity LHC (HL-LHC) upgrades are presented. Measurements include spatial resolution, charge collection performance and charge sharing between neighbouring cells as a function of track incidence angle for different bulk materials. Measurements of n-in-n pixel sensors are presented as a function of fluence for different irradiations. Furthermore p-type silicon sensors from several vendors with slightly differing layouts were tested. All tested sensors were connected by bump-bonding to the ATLAS Pixel read-out chip. We show that both n-type and p-type tested planar sensors are able to collect significant charge even after integrated fluences expected at HL-LHC.

physics.ins-det

Search for CP violation and new physics in rare B decays at the B factories

We summarize recent results by the BABAR and Belle Collaborations on the search for CP violation and new physics beyond the Standard Model in several rare B meson decays. The measurements exploit the final BABAR and Belle Upsilon(4S) datasets, which consist of approximately 470 and 772 million BBbar pairs, respectively.

hep-ex

Time-integrated measurements of the CKM angle gamma/phi3 in BABAR

The most recent determinations of the CKM angle gamma/phi3 by the BABAR Collaboration, using time-integrated observables measured in charged B --> D(*)K(*) decays, are presented.The measurements have been performed on the full sample of 468 million BBbar pairs collected by the BABAR detector at the SLAC PEP-II asymmetric-energy B factory in the years 1999-2007.

hep-ex

Lepton-Flavor-Violating tau decays at BaBar

We present the most recent searches for lepton-flavor-violating tau decays in BaBar. We find no evidence of tau decaying to three charged leptons or to a charged lepton and a neutral meson (KS, rho, phi, K*0, anti-K*0), and set upper limits on the corresponding branching fractions between 1.8 and 19 times 10-8 at 90% confidence level.

hep-ex

Measurements of the CKM angle gamma at BaBar

We report on our recent measurements of the Cabibbo-Kobayashi-Maskawa CP-violating phase gamma and of related CP-asymmetries and branching fraction ratios. The measurements have been performed on samples of up to 465 million BBbar pairs collected by the BaBar detector at the SLAC PEP-II asymmetric-energy B factory in the years 1999-2007.

hep-ex

Flavour physics of leptons and dipole moments

This chapter of the report of the ``Flavour in the era of the LHC'' Workshop discusses the theoretical, phenomenological and experimental issues related to flavour phenomena in the charged lepton sector and in flavour-conserving CP-violating processes. We review the current experimental limits and the main theoretical models for the flavour structure of fundamental particles. We analyze the phenomenological consequences of the available data, setting constraints on explicit models beyond the Standard Model, presenting benchmarks for the discovery potential of forthcoming measurements both at the LHC and at low energy, and exploring options for possible future experiments.

hep-ph

Measurement of the Charge Collection Efficiency after Heavy Non-Uniform Irradiation in BaBar Silicon Detectors

We have investigated the depletion voltage changes, the leakage current increase and the charge collection efficiency of a silicon microstrip detector identical to those used in the inner layers of the BaBar Silicon Vertex Tracker (SVT) after heavy non-uniform irradiation. A full SVT module with the front-end electronics connected has been irradiated with a 0.9 GeV electron beam up to a peak fluence of 3.5 x 10^14 e^-/cm^2, well beyond the level causing substrate type inversion. We irradiated one of the two sensors composing the module with a non-uniform profile with sigma=1.4 mm that simulates the conditions encountered in the BaBar experiment by the modules intersecting the horizontal machine plane. The position dependence of the charge collection properties and the depletion voltage have been investigated in detail using a 1060 nm LED and an innovative measuring technique based only on the digital output of the chip.

physics.ins-det