arXiv subjects

G. Meylan

Publications and source records attributed to G. Meylan.

At least 127 records · Page 7Linked to original sources

arXiv2020

Euclid preparation: IX. EuclidEmulator2 -- Power spectrum emulation with massive neutrinos and self-consistent dark energy perturbations

We present a new, updated version of the EuclidEmulator (called EuclidEmulator2), a fast and accurate predictor for the nonlinear correction of the matter power spectrum. Percent-level accurate emulation is now supported in the eight-dimensional parameter space of $w_0w_a$CDM$+\sum m_ν$models between redshift $z=0$ and $z=3$ for spatial scales within the range 0.01 $h$/Mpc $\leq k \leq$ 10 $h$/Mpc. In order to achieve this level of accuracy, we have had to improve the quality of the underlying N-body simulations used as training data: (1) we use self-consistent linear evolution of non-dark matter species such as massive neutrinos, photons, dark energy and the metric field, (2) we perform the simulations in the so-called N-body gauge, which allows one to interpret the results in the framework of general relativity, (3) we run over 250 high-resolution simulations with $3000^3$ particles in boxes of 1 (Gpc/$h$)${}^3$ volumes based on paired-and-fixed initial conditions and (4) we provide a resolution correction that can be applied to emulated results as a post-processing step in order to drastically reduce systematic biases on small scales due to residual resolution effects in the simulations. We find that the inclusion of the dynamical dark energy parameter $w_a$ significantly increases the complexity and expense of creating the emulator. The high fidelity of EuclidEmulator2 is tested in various comparisons against N-body simulations as well as alternative fast predictors like Halofit, HMCode and CosmicEmu. A blind test is successfully performed against the Euclid Flagship v2.0 simulation. Nonlinear correction factors emulated with EuclidEmulator2 are accurate at the level of 1% or better for 0.01 $h$/Mpc $\leq k \leq$ 10 $h$/Mpc and $z\leq3$ compared to high-resolution dark matter only simulations. EuclidEmulator2 is publicly available at https://github.com/miknab/EuclidEmulator2 .

astro-ph.CO↗

arXiv2020

Is every strong lens model unhappy in its own way? Uniform modelling of a sample of 13 quadruply+ imaged quasars

Strong-gravitational lens systems with quadruply-imaged quasars (quads) are unique probes to address several fundamental problems in cosmology and astrophysics. Although they are intrinsically very rare, ongoing and planned wide-field deep-sky surveys are set to discover thousands of such systems in the next decade. It is thus paramount to devise a general framework to model strong-lens systems to cope with this large influx without being limited by expert investigator time. We propose such a general modelling framework (implemented with the publicly available software Lenstronomy) and apply it to uniformly model three-band Hubble Space Telescope Wide Field Camera 3 images of 13 quads. This is the largest uniformly modelled sample of quads to date and paves the way for a variety of studies. To illustrate the scientific content of the sample, we investigate the alignment between the mass and light distribution in the deflectors. The position angles of these distributions are well-aligned, except when there is strong external shear. However, we find no correlation between the ellipticity of the light and mass distributions. We also show that the observed flux-ratios between the images depart significantly from the predictions of simple smooth models. The departures are strongest in the bluest band, consistent with microlensing being the dominant cause in addition to millilensing. Future papers will exploit this rich dataset in combination with ground based spectroscopy and time delays to determine quantities such as the Hubble constant, the free streaming length of dark matter, and the normalization of the initial stellar mass function.

astro-ph.GA↗

arXiv2020

COSMOGRAIL XIX: Time delays in 18 strongly lensed quasars from 15 years of optical monitoring

We present the results of 15 years of monitoring lensed quasars, which was conducted by the COSMOGRAIL programme at the Leonhard Euler 1.2m Swiss Telescope. The decade-long light curves of 23 lensed systems are presented for the first time. We complement our data set with other monitoring data available in the literature to measure the time delays in 18 systems, among which nine reach a relative precision better than 15% for at least one time delay. To achieve this, we developed an automated version of the curve-shifting toolbox PyCS to ensure robust estimation of the time delay in the presence of microlensing, while accounting for the errors due to the imperfect representation of microlensing. We also re-analysed the previously published time delays of RX J1131$-$1231 and HE 0435$-$1223, by adding six and two new seasons of monitoring, respectively, and confirming the previous time-delay measurements. When the time delay measurement is possible, we corrected the light curves of the lensed images from their time delay and present the difference curves to highlight the microlensing signal contained in the data. To date, this is the largest sample of decade-long lens monitoring data, which is useful to measure $H_0$ and the size of quasar accretion discs with microlensing as well as to study quasar variability.

astro-ph.CO↗

arXiv2020

Euclid: Reconstruction of Weak Lensing mass maps for non-Gaussianity studies

Weak lensing, which is the deflection of light by matter along the line of sight, has proven to be an efficient method for constraining models of structure formation and reveal the nature of dark energy. So far, most weak-lensing studies have focused on the shear field that can be measured directly from the ellipticity of background galaxies. However, within the context of forthcoming full-sky weak-lensing surveys such as Euclid, convergence maps (mass maps) offer an important advantage over shear fields in terms of cosmological exploitation. While it carry the same information, the lensing signal is more compressed in the convergence maps than in the shear field. This simplifies otherwise computationally expensive analyses, for instance, non-Gaussianity studies. However, the inversion of the non-local shear field requires accurate control of systematic effects caused by holes in the data field, field borders, shape noise, and the fact that the shear is not a direct observable (reduced shear). We present the two mass-inversion methods that are included in the official Euclid data-processing pipeline: the standard Kaiser & Squires method (KS), and a new mass-inversion method (KS+) that aims to reduce the information loss during the mass inversion. This new method is based on the KS method and includes corrections for mass-mapping systematic effects. The results of the KS+ method are compared to the original implementation of the KS method in its simplest form, using the Euclid Flagship mock galaxy catalogue. In particular, we estimate the quality of the reconstruction by comparing the two-point correlation functions and third- and fourth- order moments obtained from shear and convergence maps, and we analyse each systematic effect independently and simultaneously...

astro-ph.CO↗

arXiv2020

H0LiCOW XI. A weak lensing measurement of the external convergence in the field of the lensed quasar B1608+656 using HST and Subaru deep imaging

We investigate the environment and line of sight of the H0LiCOW lens B1608+656 using Subaru Suprime-Cam and the Hubble Space Telescope (HST) to perform a weak lensing analysis. We compare three different methods to reconstruct the mass map of the field, i.e. the standard Kaiser-Squires inversion coupled with inpainting and Gaussian or wavelet filtering, and $\tt{Glimpse}$ a method based on sparse regularization of the shear field. We find no substantial difference between the 2D mass reconstructions, but we find that the ground-based data is less sensitive to small-scale structures than the space-based observations. Marginalising over the results obtained with all the reconstruction techniques applied to the two available HST filters F606W and F814W, we estimate the external convergence, $κ_{\rm ext}$ at the position of B1608+656 is $κ_{\rm ext} = 0.11^{+0.06}_{-0.04}$, where the error bars corresponds respectively to the 16th and 84th quartiles. This result is compatible with previous estimates using the number-counts technique, suggesting that B1608+656 resides in an over-dense line of sight, but with a completely different technique. Using our mass reconstructions, we also compare the convergence at the position of several groups of galaxies in the field of B1608+656 with the mass measurements using various analytical mass profiles, and find that the weak lensing results favor truncated halo models.

astro-ph.GA↗

arXiv2020

Euclid: The importance of galaxy clustering and weak lensing cross-correlations within the photometric Euclid survey

The data from the Euclid mission will enable the measurement of the photometric redshifts, angular positions, and weak lensing shapes for over a billion galaxies. This large dataset will allow for cosmological analyses using the angular clustering of galaxies and cosmic shear. The cross-correlation (XC) between these probes can tighten constraints and it is therefore important to quantify their impact for Euclid. In this study we carefully quantify the impact of XC not only on the final parameter constraints for different cosmological models, but also on the nuisance parameters. In particular, we aim at understanding the amount of additional information that XC can provide for parameters encoding systematic effects, such as galaxy bias or intrinsic alignments (IA). We follow the formalism presented in Euclid Collaboration: Blanchard et al. (2019) and make use of the codes validated therein. We show that XC improves the dark energy Figure of Merit (FoM) by a factor $\sim 5$, whilst it also reduces the uncertainties on galaxy bias by $\sim 17\%$ and the uncertainties on IA by a factor $\sim 4$. We observe that the role of XC on the final parameter constraints is qualitatively the same irrespective of the galaxy bias model used. We also show that XC can help in distinguishing between different IA models, and that if IA terms are neglected then this can lead to significant biases on the cosmological parameters. We find that the XC terms are necessary to extract the full information content from the data in future analyses. They help in better constraining the cosmological model, and lead to a better understanding of the systematic effects that contaminate these probes. Furthermore, we find that XC helps in constraining the mean of the photometric-redshift distributions, but it requires a more precise knowledge of this mean in order not to degrade the final FoM. [Abridged]

astro-ph.CO↗

arXiv2020

STRIDES: a 3.9 per cent measurement of the Hubble constant from the strong lens system DES J0408-5354

We present a blind time-delay cosmographic analysis for the lens system DES J0408$-$5354. This system is extraordinary for the presence of two sets of multiple images at different redshifts, which provide the opportunity to obtain more information at the cost of increased modelling complexity with respect to previously analyzed systems. We perform detailed modelling of the mass distribution for this lens system using three band Hubble Space Telescope imaging. We combine the measured time delays, line-of-sight central velocity dispersion of the deflector, and statistically constrained external convergence with our lens models to estimate two cosmological distances. We measure the "effective" time-delay distance corresponding to the redshifts of the deflector and the lensed quasar $D_{Δt}^{\rm eff}=3382^{+146}_{-115}$ Mpc and the angular diameter distance to the deflector $D_{\rm d}=1711^{+376}_{-280}$ Mpc, with covariance between the two distances. From these constraints on the cosmological distances, we infer the Hubble constant $H_0 = 74.2^{+2.7}_{-3.0}$ km s$^{-1}$ Mpc$^{-1}$ assuming a flat $Λ$CDM cosmology and a uniform prior for $Ω_{\rm m}$ as $Ω_{\rm m} \sim \mathcal{U}(0.05, 0.5)$. This measurement gives the most precise constraint on $H_0$ to date from a single lens. Our measurement is consistent with that obtained from the previous sample of six lenses analyzed by the $H_0$ Lenses in COSMOGRAIL's Wellspring (H0LiCOW) collaboration. It is also consistent with measurements of $H_0$ based on the local distance ladder, reinforcing the tension with the inference from early Universe probes, for example, with 2.2$σ$ discrepancy from the cosmic microwave background measurement.

astro-ph.CO↗

arXiv2020

Euclid: The reduced shear approximation and magnification bias for Stage IV cosmic shear experiments

Stage IV weak lensing experiments will offer more than an order of magnitude leap in precision. We must therefore ensure that our analyses remain accurate in this new era. Accordingly, previously ignored systematic effects must be addressed. In this work, we evaluate the impact of the reduced shear approximation and magnification bias, on the information obtained from the angular power spectrum. To first-order, the statistics of reduced shear, a combination of shear and convergence, are taken to be equal to those of shear. However, this approximation can induce a bias in the cosmological parameters that can no longer be neglected. A separate bias arises from the statistics of shear being altered by the preferential selection of galaxies and the dilution of their surface densities, in high-magnification regions. The corrections for these systematic effects take similar forms, allowing them to be treated together. We calculated the impact of neglecting these effects on the cosmological parameters that would be determined from Euclid, using cosmic shear tomography. To do so, we employed the Fisher matrix formalism, and included the impact of the super-sample covariance. We also demonstrate how the reduced shear correction can be calculated using a lognormal field forward modelling approach. These effects cause significant biases in Omega_m, sigma_8, n_s, Omega_DE, w_0, and w_a of -0.53 sigma, 0.43 sigma, -0.34 sigma, 1.36 sigma, -0.68 sigma, and 1.21 sigma, respectively. We then show that these lensing biases interact with another systematic: the intrinsic alignment of galaxies. Accordingly, we develop the formalism for an intrinsic alignment-enhanced lensing bias correction. Applying this to Euclid, we find that the additional terms introduced by this correction are sub-dominant.

astro-ph.CO↗

arXiv2020

STRIDES: Spectroscopic and photometric characterization of the environment and effects of mass along the line of sight to the gravitational lenses DES J0408-5354 and WGD 2038-4008

In time-delay cosmography, three of the key ingredients are 1) determining the velocity dispersion of the lensing galaxy, 2) identifying galaxies and groups along the line of sight with sufficient proximity and mass to be included in the mass model, and 3) estimating the external convergence $κ_\mathrm{ext}$ from less massive structures that are not included in the mass model. We present results on all three of these ingredients for two time-delay lensed quasar systems, DES J0408-5354 and WGD 2038-4008. We use the Gemini, Magellan and VLT telescopes to obtain spectra to both measure the stellar velocity dispersions of the main lensing galaxies and to identify the line-of-sight galaxies in these systems. Next, we identify 10 groups in DES J0408-5354 and 2 groups in WGD 2038-4008using a group-finding algorithm. We then identify the most significant galaxy and galaxy-group perturbers using the "flexion shift" criterion. We determine the probability distribution function of the external convergence $κ_\mathrm{ext}$ for both of these systems based on our spectroscopy and on the DES-only multiband wide-field observations. Using weighted galaxy counts, calibrated based on the Millennium Simulation, we find that DES J0408-5354 is located in a significantly underdense environment, leading to a tight (width $\sim3\%$), negative-value $κ_\mathrm{ext}$ distribution. On the other hand, WGD 2038-4008 is located in an environment of close to unit density, and its low source redshift results in a much tighter $κ_\mathrm{ext}$ of $\sim1\%$, as long as no external shear constraints are imposed.

astro-ph.GA↗

arXiv2020

Euclid: The selection of quiescent and star-forming galaxies using observed colours

The Euclid mission will observe well over a billion galaxies out to $z\sim6$ and beyond. This will offer an unrivalled opportunity to investigate several key questions for understanding galaxy formation and evolution. The first step for many of these studies will be the selection of a sample of quiescent and star-forming galaxies, as is often done in the literature by using well known colour techniques such as the `UVJ' diagram. However, given the limited number of filters available for the Euclid telescope, the recovery of such rest-frame colours will be challenging. We therefore investigate the use of observed Euclid colours, on their own and together with ground-based u-band observations, for selecting quiescent and star-forming galaxies. The most efficient colour combination, among the ones tested in this work, consists of the (u-VIS) and (VIS-J) colours. We find that this combination allows users to select a sample of quiescent galaxies complete to above $\sim70\%$ and with less than 15$\%$ contamination at redshifts in the range $0.75 65\%$ completeness level and contamination below 20$\%$ at $1<z<2$ for finding quiescent galaxies. In comparison, the sample of quiescent galaxies selected with the traditional UVJ technique is only $\sim20\%$ complete at $z<3$, when recovering the rest-frame colours using mock Euclid observations. This shows that our new methodology is the most suitable one when only Euclid bands, along with u-band imaging, are available.

astro-ph.GA↗

arXiv2019

Euclid preparation: V. Predicted yield of redshift 7<z<9 quasars from the wide survey

We provide predictions of the yield of $7 8$ may be selected from Euclid $OYJH$ photometry alone, but selection over the redshift interval $7 7.5$ should be found in the DR1 data release, expected in 2024. It will be possible to determine the bright-end slope of the QLF, $7<z<8$, $M_{1450}<-25$, using 8m class telescopes to confirm candidates, but follow-up with JWST or E-ELT will be required to measure the faint-end slope. Contamination of the candidate lists is predicted to be modest even at $J_{AB}\sim23$. The precision with which $k$ can be determined over $7<z<8$ depends on the value of $k$, but assuming $k=-0.72$ it can be measured to a 1 sigma uncertainty of 0.07.

astro-ph.GA↗

arXiv2019

H0LiCOW X: Spectroscopic/imaging survey and galaxy-group identification around the strong gravitational lens system WFI2033-4723

Galaxies and galaxy groups located along the line of sight towards gravitationally lensed quasars produce high-order perturbations of the gravitational potential at the lens position. When these perturbation are too large, they can induce a systematic error on $H_0$ of a few-percent if the lens system is used for cosmological inference and the perturbers are not explicitly accounted for in the lens model. In this work, we present a detailed characterization of the environment of the lens system WFI2033-4723 ($z_{\rm src} = 1.662$, $z_{\rm lens}$ = 0.6575), one of the core targets of the H0LICOW project for which we present cosmological inferences in a companion paper (Rusu et al. 2019). We use the Gemini and ESO-Very Large telescopes to measure the spectroscopic redshifts of the brightest galaxies towards the lens, and use the ESO-MUSE integral field spectrograph to measure the velocity-dispersion of the lens ($σ_{\rm {los}}= 250^{+15}_{-21}$ km/s) and of several nearby galaxies. In addition, we measure photometric redshifts and stellar masses of all galaxies down to $i < 23$ mag, mainly based on Dark Energy Survey imaging (DR1). Our new catalog, complemented with literature data, more than doubles the number of known galaxy spectroscopic redshifts in the direct vicinity of the lens, expanding to 116 (64) the number of spectroscopic redshifts for galaxies separated by less than 3 arcmin (2 arcmin) from the lens. Using the flexion-shift as a measure of the amplitude of the gravitational perturbation, we identify 2 galaxy groups and 3 galaxies that require specific attention in the lens models. The ESO MUSE data enable us to measure the velocity-dispersions of three of these galaxies. These results are essential for the cosmological inference analysis presented in Rusu et al. (2019).

astro-ph.GA↗

arXiv2019

H0LiCOW - IX. Cosmographic analysis of the doubly imaged quasar SDSS 1206+4332 and a new measurement of the Hubble constant

We present a blind time-delay strong lensing (TDSL) cosmographic analysis of the doubly imaged quasar SDSS 1206+4332. We combine the relative time delay between the quasar images, Hubble Space Telescope imaging, the Keck stellar velocity dispersion of the lensing galaxy, and wide-field photometric and spectroscopic data of the field to constrain two angular diameter distance relations. The combined analysis is performed by forward modelling the individual data sets through a Bayesian hierarchical framework, and it is kept blind until the very end to prevent experimenter bias. After unblinding, the inferred distances imply a Hubble constant $H_0 = 68.8^{+5.4}_{-5.1}$ kms$^{-1}$Mpc$^{-1}$, assuming a flat Lambda cold dark matter cosmology with uniform prior on $Ω_{\rm m}$ in [0.05, 0.5]. The precision of our cosmographic measurement with the doubly imaged quasar SDSS 1206+4332 is comparable with those of quadruply imaged quasars and opens the path to perform on selected doubles the same analysis as anticipated for quads. Our analysis is based on a completely independent lensing code than our previous three H0LiCOW systems and the new measurement is fully consistent with those. We provide the analysis scripts paired with the publicly available software to facilitate independent analysis. The consistency between blind measurements with independent codes provides an important sanity check on lens modelling systematics. By combining the likelihoods of the four systems under the same prior, we obtain $H_0 = 72.5^{+2.1}_{-2.3}$kms$^{-1}$Mpc$^{-1}$. This measurement is independent of the distance ladder and other cosmological probes.

astro-ph.CO↗

arXiv2019

COSMOGRAIL XVIII: time delays of the quadruply lensed quasar WFI2033-4723

We present new measurements of the time delays of WFI2033-4723. The data sets used in this work include 14 years of data taken at the 1.2m Leonhard Euler Swiss telescope, 13 years of data from the SMARTS 1.3m telescope at Las Campanas Observatory and a single year of high-cadence and high-precision monitoring at the MPIA 2.2m telescope. The time delays measured from these different data sets, all taken in the R-band, are in good agreement with each other and with previous measurements from the literature. Combining all the time-delay estimates from our data sets results in Dt_AB = 36.2-0.8+0.7 days (2.1% precision), Dt_AC = -23.3-1.4+1.2 days (5.6%) and Dt_BC = -59.4-1.3+1.3 days (2.2%). In addition, the close image pair A1-A2 of the lensed quasars can be resolved in the MPIA 2.2m data. We measure a time delay consistent with zero in this pair of images. We also explore the prior distributions of microlensing time-delay potentially affecting the cosmological time-delay measurements of WFI2033-4723. There is however no strong indication in our measurements that microlensing time delay is neither present nor absent. This work is part of a H0LiCOW series focusing on measuring the Hubble constant from WFI2033-4723.

astro-ph.CO↗

arXiv2018

The STRong lensing Insights into the Dark Energy Survey (STRIDES) 2016 follow-up campaign. I. Overview and classification of candidates selected by two techniques

The primary goals of the STRong lensing Insights into the Dark Energy Survey (STRIDES) collaboration are to measure the dark energy equation of state parameter and the free streaming length of dark matter. To this aim, STRIDES is discovering strongly lensed quasars in the imaging data of the Dark Energy Survey and following them up to measure time delays, high resolution imaging, and spectroscopy sufficient to construct accurate lens models. In this paper, we first present forecasts for STRIDES. Then, we describe the STRIDES classification scheme, and give an overview of the Fall 2016 follow-up campaign. We continue by detailing the results of two selection methods, the Outlier Selection Technique and a morphological algorithm, and presenting lens models of a system, which could possibly be a lensed quasar in an unusual configuration. We conclude with the summary statistics of the Fall 2016 campaign. Including searches presented in companion papers (Anguita et al.; Ostrovski et al.), STRIDES followed up 117 targets identifying 7 new strongly lensed systems, and 7 nearly identical quasars (NIQs), which could be confirmed as lenses by the detection of the lens galaxy. 76 candidates were rejected and 27 remain otherwise inconclusive, for a success rate in the range 6-35\%. This rate is comparable to that of previous searches like SQLS even though the parent dataset of STRIDES is purely photometric and our selection of candidates cannot rely on spectroscopic information.

astro-ph.CO↗

arXiv2018

COSMOGRAIL XVII: Time delays for the quadruply imaged quasar PG 1115+080

We present time-delay estimates for the quadruply imaged quasar PG 1115+080. Our resuls are based on almost daily observations for seven months at the ESO MPIA 2.2m telescope at La Silla Observatory, reaching a signal-to-noise ratio of about 1000 per quasar image. In addition, we re-analyse existing light curves from the literature that we complete with an additional three seasons of monitoring with the Mercator telescope at La Palma Observatory. When exploring the possible source of bias we consider the so-called microlensing time delay, a potential source of systematic error so far never directly accounted for in previous time-delay publications. In fifteen years of data on PG 1115+080, we find no strong evidence of microlensing time delay. Therefore not accounting for this effect, our time-delay estimates on the individual data sets are in good agreement with each other and with the literature. Combining the data sets, we obtain the most precise time-delay estimates to date on PG 1115+080, with Dt(AB) = 8.3+1.5-1.6 days (18.7% precision), Dt(AC) = 9.9+1.1-1.1 days (11.1%) and Dt(BC) = 18.8+1.6-1.6 days (8.5%). Turning these time delays into cosmological constraints is done in a companion paper that makes use of ground-based Adaptive Optics (AO) with the Keck telescope.

astro-ph.CO↗

arXiv2017

H0LiCOW VIII. A weak lensing measurement of the external convergence in the field of the lensed quasar HE$\,$0435$-$1223

We present a weak gravitational lensing measurement of the external convergence along the line of sight to the quadruply lensed quasar HE$\,$0435$-$1223. Using deep r-band images from Subaru-Suprime-Cam we observe galaxies down to a 3$σ$ limiting magnitude of $\sim 26$ mags resulting in a source galaxy density of 14 galaxies / arcmin$^2$ after redshift-based cuts. Using an inpainting technique and Multi-Scale Entropy filtering algorithm, we find that the region in close proximity to the lens has an estimated external convergence of $κ=-0.012^{+0.020}_{-0.013}$ and is hence marginally under-dense. We also rule out the presence of any halo with a mass greater than $M_{\rm vir}=1.6\times10^{14}h^{-1}M_\odot$ (68$\%$ confidence limit). Our results, consistent with previous studies of this lens, confirm that the intervening mass along the line of sight to HE$\,$0435$-$1223 does not affect significantly the cosmological results inferred from the time delay measurements of that specific object.

astro-ph.CO↗

arXiv2017

DES meets Gaia: discovery of strongly lensed quasars from a multiplet search

We report the discovery, spectroscopic confirmation and first lens models of the first two, strongly lensed quasars from a combined search in WISE and Gaia over the DES footprint. The four-image lensWGD2038-4008 (r.a.=20:38:02.65, dec.=-40:08:14.64) has source- and lens-redshifts $z_{s}=0.777 \pm 0.001$ and $z_l = 0.230 \pm 0.002$ respectively. Its deflector has effective radius $R_{\rm eff} \approx 3.4^{\prime\prime}$, stellar mass $\log(M_{\star}/M_{\odot}) = 11.64^{+0.20}_{-0.43}$, and shows extended isophotal shape variation. Simple lens models yield Einstein radii $R_{\rm E}=(1.30\pm0.04)^{\prime\prime},$ axis ratio $q=0.75\pm0.1$ (compatible with that of the starlight) and considerable shear-ellipticity degeneracies. The two-image lensWGD2021-4115 (r.a.=20:21:39.45, dec.=--41:15:57.11) has $z_{s}=1.390\pm0.001$ and $z_l = 0.335 \pm 0.002$, and Einstein radius $R_{\rm E} = (1.1\pm0.1)^{\prime\prime},$ but higher-resolution imaging is needed to accurately separate the deflector and faint quasar image. We also show high-rank candidate doubles selected this way, some of which have been independently identified with different techniques, and discuss a DES+WISE quasar multiplet selection.

astro-ph.CO↗