SearcharxivSearch

arXiv subjects

G. Nukazuka

Publications and source records attributed to G. Nukazuka.

3 recordsLinked to original sources

Beam test results of the Intermediate Silicon Tracker for sPHENIX

The Intermediate Silicon Tracker (INTT), a two-layer barrel silicon strip tracker, is a key component of the tracking system for sPHENIX at the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory. The INTT is designed to enable the association of reconstructed tracks with individual RHIC bunch crossings. To evaluate the performance of preproduction INTT ladders and the readout chain, a beam test was conducted at the Research Center for Accelerator and Radioisotope Science, Tohoku University, Japan. This paper presents the performance of the INTT evaluated through studies of the signal-to-noise ratio, residual distribution, spatial resolution, hit-detection efficiency, and multiple track reconstruction.

physics.ins-det

The Ladder and Readout Cables of Intermediate Silicon Strip Detector for sPHENIX

A new silicon-strip-type detector was developed for precise charged-particle tracking in the central rapidity region of heavy ion collisions. A new detector and collaboration at the Relativistic Heavy Ion Collider at Brookhaven National Laboratory is sPHENIX, which is a major upgrade of the PHENIX detector. The intermediate tracker (INTT) is part of the advanced tracking system of the sPHENIX detector complex together with a CMOS monolithic-active-pixel-sensor based silicon-pixel vertex detector, a time-projection chamber, and a micromegas-based detector. The INTT detector is barrel shaped and comprises 56 silicon ladders. Two different types of strip sensors of 78~$μm$ pitch and 320~$μm$ thick are mounted on each half of a silicon ladder. Each strip sensor is segmented into 8$\times$2 and 5$\times$2 blocks with lengths of 16 and 20 mm. Strips are read out with a silicon strip-readout (FPHX) chip. In order to transmit massive data from the FPHX to the down stream readout electronics card (ROC), a series of long and high speed readout cables were developed. This document focuses on the silicon ladder, the readout cables, and the ROC of the INTT. The radiation hardness is studied for some parts of the INTT devices in the last part of this document, since the INTT employed some materials from the technology frontier of the industry whose radiation hardness is not necessarily well known.

physics.ins-det

Polarised target for Drell-Yan experiment in COMPASS at CERN, part I

In the polarised Drell-Yan experiment at the COMPASS facility in CERN pion beam with momentum of 190 GeV/c and intensity about $10^8$ pions/s interacted with transversely polarised NH$_3$ target. Muon pairs produced in Drel-Yan process were detected. The measurement was done in 2015 as the 1st ever polarised Drell-Yan fixed target experiment. The hydrogen nuclei in the solid-state NH$_3$ were polarised by dynamic nuclear polarisation in 2.5 T field of large-acceptance superconducting magnet. Large helium dilution cryostat was used to cool the target down below 100 mK. Polarisation of hydrogen nuclei reached during the data taking was about 80 %. Two oppositely polarised target cells, each 55 cm long and 4 cm in diameter were used. Overview of COMPASS facility and the polarised target with emphasis on the dilution cryostat and magnet is given. Results of the polarisation measurement in the Drell-Yan run and overviews of the target material, cell and dynamic nuclear polarisation system are given in the part II.

physics.ins-det