arXiv subjects

G. P. Pepe

Publications and source records attributed to G. P. Pepe.

15 recordsLinked to original sources

arXiv2026

Phase dynamics and dissipation in tunnel ferromagnetic Josephson junctions

We investigate tunnel ferromagnetic Josephson junctions based on Superconductor-Insulator-thin superconductor-Ferromagnet-Superconductor multilayers. A comparative study of their electrodynamic properties is performed for junctions with niobium and aluminum (Al) electrodes, featuring different ferromagnetic interlayer materials and lateral dimensions ranging from the micrometric to the submicrometric scale. The parameters extracted from the fitting of the current-voltage characteristics using the tunnel junction microscopic model are found to be consistent with those independently estimated from switching current distribution measurements. Submicrometric Al-based devices exhibit electrodynamic properties comparable to those implemented in state-of-the-art transmon qubits and display clear signatures of quantum phase diffusion. The strong agreement between transport modelling and escape dynamics establishes a robust framework for describing hybrid ferromagnetic Josephson junctions consistent with their energy scales and supports their potential integration into superconducting quantum and classical digital circuits.

cond-mat.supr-con↗

arXiv2024

Investigating pump harmonics generation in a SNAIL-based Traveling Wave Parametric Amplifier

Traveling Wave Parametric Amplifiers (TWPAs) are extensively employed in experiments involving weak microwave signals for their highly desirable quantum-limited and broadband characteristics. However, TWPAs' broadband nature comes with the disadvantage of admitting the activation of spurious nonlinear processes, such as harmonics generation, that can potentially degrade amplification performance. Here we experimentally investigate a Josephson TWPA device with SNAIL (Superconducting Nonlinear Asymmetric Inductive Element)-based unit cells focusing on the amplification behaviour along with the generation of second and third harmonics of the pump. By comparing experimental results with transient numerical simulations, we demonstrate the influence of Josephson junctions' fabrication imperfections on the occurrence of harmonics and on the gain behaviour.

quant-ph↗

arXiv2024

Single photon detection up to 2 um in pair of parallel microstrips based on NbRe ultrathin films

Superconducting Microstrip Single Photon Detectors (SMSPDs) are increasingly attracting the interest of the scientific community as a new platform for large area detectors with unprecedented advantaged in terms of fabrication. However, while their operativity at the telecommunication wavelength was achieved, working beyond 1.55 um is challenging. Here, we experimentally demonstrate single-photon operation of NbRe microstrips at wavelengths of 1.55 and 2 um. The devices are structured as pairs of parallel microstrips with widths ranging from 1.4 to 2.2 um and lengths from 5 to 10 um. This innovative design may assure large sensitive areas, without affecting the kinetic inductance, namely the time performance of the detectors. The results are discussed in the framework of the hot-spot two-temperature model.

cond-mat.supr-con↗

arXiv2024

Modeling flux tunability in Josephson Traveling Wave Parametric Amplifiers with an open-source frequency-domain simulator

Josephson Traveling Wave Parametric Amplifiers (JTWPAs) are integral parts of many experiments carried out in quantum technologies. Being composed of hundreds of Josephson junction-based unit cells, such devices exhibit complex nonlinear behavior that typically cannot be fully explained with simple analytical models, thus necessitating the use of numerical simulators. A very useful characteristic of JTWPAs is the possibility of being biased by an external magnetic flux, allowing insitu control of the nonlinearity. It is therefore very desirable for numerical simulators to support this feature. Open-source numerical tools that allow to model JTWPA flux biasing, such as WRSPICE or PSCAN2, are based on time-domain approaches,which typically require long simulation times to get accurate results. In this work, we model the gain performance in a prototypical flux-tunable JTWPA by using JosephsonCircuits.jl,a recently developed frequency-domain open-source numerical simulator, which has the benefit of simulation times about 10,000 faster than time-domain methods. By comparing the numerical and experimental results, we validate this approach for modeling the flux dependent behavior of JTWPAs.

quant-ph↗

arXiv2024

Numerical simulations of Josephson Traveling Wave Parametric Amplifiers (JTWPAs): comparative study of open-source tools

Josephson Traveling Wave Parametric Amplifiers (JTWPAs) are largely exploited in quantum technologies for their broadband and low noise performance in the microwave regime. When one or more microwave tones are applied at the input, such devices show a complex wave-mixing response due to their intrinsic nonlinear nature. Numerical simulations of the JTWPAs nonlinear behaviour provide useful insights not only for the design of such devices, but also for the interpretation and validation of the experimental results. Here we present and discuss a comparative analysis of different open-source tools which can be used for JTWPAs numerical simulations. We focus on two tools for transient simulations, WRSPICE and PSCAN2, and on one tool for direct simulation of the frequency domain behaviour, JosephsonCircuit.jl. We describe the working principle of these three tools and test them considering as a benchmark a JTWPA based on SNAILs (Superconducting Nonlinear Asymmetric Inductive eLement) with realistic experimental parameters. Our results can serve as a guide for numerical simulations of JTWPAs with open-source tools, highlighting advantages and disadvantages depending on the simulation tasks.

quant-ph↗

arXiv2022

Casimir energy for N superconducting cavities: a model for the YBCO (BSCCO)

In this paper we study the Casimir energy of a sample made by N cavities, with N >> 1, across the transition from the metallic to the superconducting phase of the constituting plates. After having characterized the energy for the configuration in which the layers constituting the cavities are made by dielectric and for the configuration in which the layers are made by plasma sheets, we concentrate our analysis on the latter. It represents the final step towards the macroscopic characterization of a "multi cavity" (with N large) necessary to fully understand the behaviour of the Casimir energy of a YBCO (or a BSCCO) sample across the transition. Our analysis is especially useful to the Archimedes experiment, aimed at measuring the interaction of the electromagnetic vacuum energy with a gravitational field. To this purpose, we aim at modulating the Casimir energy of a layered structure, the multi cavity, by inducing a transition from the metallic to the superconducting phase. After having characterized the Casimir energy of such a structure for both the metallic and the superconducting phase, we give an estimate of the modulation of the energy across the transition.

quant-ph↗

arXiv2020

Electrodynamics of highly spin-polarized tunnel Josephson junctions

The continuous development of superconducting electronics is encouraging several studies on hybrid Josephson junctions (JJs) based on superconductor/ferromagnet/superconductor (SFS) heterostructures, as either spintronic devices or switchable elements in quantum and classical circuits. Recent experimental evidence of macroscopic quantum tunneling and of an incomplete 0-pi transition in tunnel-ferromagnetic spin-filter JJs could enhance the capabilities of SFS JJs also as active elements. Here, we provide a self-consistent electrodynamic characterization of NbN/GdN/NbN spin-filter JJs as a function of the barrier thickness, disentangling the high-frequency dissipation effects due to the environment from the intrinsic low-frequency dissipation processes. The fitting of the IV characteristics at 4.2K and at 300mK by using the Tunnel Junction Microscopic model allows us to determine the subgap resistance Rsg, the quality factor Q and the junction capacitance C. These results provide the scaling behavior of the electrodynamic parameters as a function of the barrier thickness, which represents a fundamental step for the feasibility of tunnel ferromagnetic JJs as active elements in classical and quantum circuits, and are of general interest for tunnel junctions other than conventional SIS JJs.

cond-mat.supr-con↗

arXiv2020

Use of a spoof plasmon to optimize the coupling of infrared radiation to Josephson Junction fluxon oscillations

We show that Infrared radiation impinging onto a 1-d array of grooves drilled in the superconductor electrode of a long overlap junction can improve matching between fluxon oscillations at THz frequencies and a spoof plasmon of comparable wavelength. This example proves that metamaterials can be very helpful in integrating superconductive and subwavelength optical circuits with optimized matching bridging the gap between infrared and microwave radiation.

cond-mat.supr-con↗

arXiv2018

Proximity SQUID single photon detector via temperature-to-voltage conversion

We propose a single photon detector based on a superconducting quantum interference device (SQUID) with superconductor-normal metal-superconductor Josephson weak links. One of the two Josephson junctions is connected to an antenna, and is heated when a photon is absorbed. The increase of the weak link temperature exponentially suppresses the Josephson critical current thereby inducing an asymmetry in the SQUID. This generates a voltage pulse across the SQUID that can be measured with a threshold detector. Realized with realistic parameters the device can be used as a single photon detector, and as a calorimeter since it is able to discriminate photons frequency above $5~$THz with a signal-to-noise ratio larger than $20$. The detector performance are robust with respect to working temperatures between $0.1~$ K and $0.5~$K, and thermal noise perturbation.

cond-mat.supr-con↗

arXiv2017

Casimir energy for two and three superconducting coupled cavities

In this paper we study the behavior of the Casimir energy of a "multi-cavity" across the transition from the metallic to the superconducting phase of the constituting plates. Our analysis is carried out in the framework of the ARCHIMEDES experiment, aiming at measuring the interaction of the electromagnetic vacuum energy with a gravitational field. For this purpose it is foreseen to modulate the Casimir energy of a layered structure composing a multi-cavity coupled system by inducing a transition from the metallic to the superconducting phase. This implies a thorough study of the behavior of the cavity, where normal metallic layers are alternated with superconducting layers, across the transition. Our study finds that, because of the coupling between the cavities, mainly mediated by the transverse magnetic modes of the radiation field, the variation of energy across the transition can be very large.

hep-th↗

arXiv2015

Archimedes: a feasibility study of an experiment to weigh the electromagnetic vacuum

Archimedes is a feasibility study of a future experiment to ascertain the interaction of vacuum fluctuations with gravity. The experiment should measure the force that the earth's gravitational field exerts on a Casimir cavity by using a small force detector. Here we analyse the main parameters of the experiment and we present its conceptual scheme, which overcomes in principle the most critical problems.

gr-qc↗

arXiv2015

The Archimedes experiment

Archimedes is an INFN-funded pathfinder experiment aimed at verifying the feasibility of measuring the interaction of vacuum fluctuations with gravity. The final experiment will measure the force exerted by the gravitational field on a Casimir cavity whose vacuum energy is modulated with a superconductive transition, by using a balance as a small force detector. Archimedes is a two-year project devoted to test the most critical experimental aspects, in particular the balance resonance frequency and quality factor, the thermal modulation efficiency and the superconductive sample realization.

gr-qc↗

arXiv2008

Unification of bulk and interface electroresistive switching in oxide systems

We demonstrate that the physical mechanism behind electroresistive switching in oxide Schottky systems is electroformation, as in insulating oxides. Negative resistance shown by the hysteretic current-voltage curves proves that impact ionization is at the origin of the switching. Analyses of the capacitance-voltage and conductance-voltage curves through a simple model show that an atomic rearrangement is involved in the process. Switching in these systems is a bulk effect, not strictly confined at the interface but at the charge space region.

cond-mat.str-el↗

arXiv2007

Integrating Superconductive and Optical Circuits

We have integrated on oxidized silicon wafers superconductive films and Josephson junctions along with sol-gel optical channel waveguides. The fabrication process is carried out in two steps that result to be solid and non-invasive. It is demonstrated that 660 nm light, coupled from an optical fibre into the channel sol-gel waveguide, can be directed toward superconducting tunnel junctions whose current-voltage characteristics are affected by the presence of the radiation. The dependence of the change in the superconducting energy gap under optical pumping is discussed in terms of a non-equilibrium superconductivity model.

cond-mat.supr-con↗

arXiv2001

Pulse-induced switches in a Josephson tunnel stacked device

Pulse activated transitions from the metastable to the running state and viceversa have been observed in a stacked double tunnel Nb-based Josephson system. Experimental results are compared with numerical simulations based on the Sine-Gordon model of the stacked junctions by injecting pulses with variable amplitude in one of the junctions of the stack, and observing the voltage response of the other junction. Both experimental and numerical results show the possibility to induce both direct and back-switching transitions from the metastable to the running state simply by changing the amplitude of the electronic pulses injected across the stack device.

cond-mat.supr-con↗