arXiv subjects

G. Patanchon

Publications and source records attributed to G. Patanchon.

At least 19 recordsLinked to original sources

arXiv2026

Galactic Science with the LiteBIRD satellite: Spectral characterization of diffuse Galactic polarized emission at the angular power spectrum level

Detection of primordial $B$-mode polarization in the cosmic microwave background (CMB) from tensor perturbations generated during inflation is a major scientific goal of future CMB missions. Its success will strongly depend on the characterization of polarized foregrounds, a challenge that the LiteBIRD satellite aims to tackle with its 15 frequency bands ranging from 40 to 402 GHz. In this work, we forecast the ability of LiteBIRD to characterize polarized dust and synchrotron emission in the diffuse interstellar medium (ISM), at the angular power spectrum level. From simulated LiteBIRD intensity and polarization maps with different foreground complexities, we compute cross-frequency angular power spectra and fit them to dust and synchrotron spectral energy distributions, which are modeled by a modified black body and a power law, respectively. We find that LiteBIRD will be able to measure the dust temperature, dust and synchrotron spectral indices and spatial correlation with dispersions as low as $\sigma(T_{\rm d})\sim0.2$ K, $\sigma(\beta_{\rm d})\sim0.006$, $\sigma(\beta_{\rm s})\sim0.04$ and $\sigma(\rho)\sim10^{-2}$, as well as to detect and quantify deviations from the proposed parametric model due to variations of the emission properties in the three dimensions of our Galaxy. Additionally, LiteBIRD is likely to rule out the power-law model of polarized foreground angular power spectra suggested by Planck data. It will also be able to detect differences in the values of $\beta_{\rm d}$, $T_{\rm d}$, and $\beta_{\rm s}$ between $E$ modes, $B$ modes, and intensity in the diffuse ISM for the first time, highlighting the joint variations of the physical conditions and the magnetic field structure across the Galaxy. We conclude that in addition to detailed studies of CMB polarization, LiteBIRD will open a new window onto the physical conditions governing the ISM of the Milky Way.

astro-ph.GA↗

arXiv2026

A cross-calibration approach for polarisation-sensitive detectors in CMB experiments: application to LiteBIRD's polarisation angle calibration

One of the current challenges in observational cosmology is obtaining high-precision polarisation maps of the CMB to measure primordial $B$-modes and constrain the tensor-to-scalar ratio ($r$). The weakness of this signal compared to foregrounds and $E$-to-$B$ leakage makes this task particularly challenging, requiring large detector arrays operating at multiple frequencies and extremely precise calibration. We present a cross-calibration algorithm to determine relative calibration of detectors within the same frequency band of a CMB experiment. The method iteratively compares single-detector maps with band-averaged maps and can be applied to any calibration parameter that can be observed and corrected at the map level, relaxing pre-flight calibration requirements and enabling post-processing validation. We validate the pipeline by calibrating the polarisation angle of simulated LiteBIRD observations, including both random detector miscalibration and wafer-level rotations. The algorithm converges to correct values with arcminute precision. Finally, we propagate residual calibration uncertainties through component separation and tensor-to-scalar ratio estimation pipelines using both parametric (FgBuster) and blind (HILC) methods. The induced bias on $r$ remains well below the LiteBIRD systematics budget of $\delta r < 6.5\times10^{-6}$, demonstrating that the method is suitable for next-generation CMB experiments.

astro-ph.CO↗

arXiv2026

Mitigating half-wave plate systematics at the map-making level: calibration requirements for LiteBIRD

Although half-wave plates (HWPs) are becoming a popular choice of polarization modulators for cosmic microwave background (CMB) experiments, their non-idealities can introduce systematic effects that should be carefully characterized and mitigated. One possible mitigation strategy is to incorporate information about the non-idealities at the map-making level, which helps to reduce the HWP-induced distortions of the reconstructed CMB. Nevertheless, the non-idealities can only be known with finite precision. In this paper we investigate the consequences of discrepancies between their true frequency profiles and those assumed by the map-maker. We present an end-to-end framework, including a blind component-separation step, and use it to translate these discrepancies into a bias on the tensor-to-scalar ratio, $r$, for the LiteBIRD satellite mission. We subsequently derive realistic and conservative measurement requirements for accurately characterizing the HWP non-idealities to ensure they do not compromise LiteBIRD's ambitious scientific goals. We find that the obtained results are robust against sky models with varying complexity.

astro-ph.CO↗

arXiv2025

Non-Gaussianity in SMICA

We develop a new formalism for the component separation method Spectral Matching Independent Component Analysis (SMICA) in order to include the information contained in the foregrounds beyond second-order statistics. We also develop a binned bispectrum estimator that works directly using maps of different frequency channels, capable of determining the bispectrum of multiple components at the same time, shifting the traditional approach to non-Gaussianity estimation from a cleaned map to the component separation step, for a better handling of foreground uncertainty. We test our method on 400 E and B polarization simulations based on the LiteBIRD experiment, containing the two main sources of contamination for CMB polarization experiments: polarized dust and synchrotron emission. We show that the bispectrum does not improve the precision of the power spectrum estimation or of the spectral parameters. However, we are capable of recovering the correct 3-point correlator of the foregrounds and standard constraints on primordial non-Gaussianity in a coherent multi-frequency and multi-component framework. The advantage of our approach is that it combines data in an optimal way accounting for the power spectrum and the bispectrum of the various components, which is not true for the standard approach.

astro-ph.CO↗

arXiv2025

A Simulation Framework for the LiteBIRD Instruments

LiteBIRD, the Lite (Light) satellite for the study of $B$-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission focused on primordial cosmology and fundamental physics. In this paper, we present the LiteBIRD Simulation Framework (LBS), a Python package designed for the implementation of pipelines that model the outputs of the data acquisition process from the three instruments on the LiteBIRD spacecraft: LFT (Low-Frequency Telescope), MFT (Mid-Frequency Telescope), and HFT (High-Frequency Telescope). LBS provides several modules to simulate the scanning strategy of the telescopes, the measurement of realistic polarized radiation coming from the sky (including the Cosmic Microwave Background itself, the Solar and Kinematic dipole, and the diffuse foregrounds emitted by the Galaxy), the generation of instrumental noise and the effect of systematic errors, like pointing wobbling, non-idealities in the Half-Wave Plate, et cetera. Additionally, we present the implementation of a simple but complete pipeline that showcases the main features of LBS. We also discuss how we ensured that LBS lets people develop pipelines whose results are accurate and reproducible. A full end-to-end pipeline has been developed using LBS to characterize the scientific performance of the LiteBIRD experiment. This pipeline and the results of the first simulation run are presented in Puglisi et al. (2025).

astro-ph.IM↗

arXiv2025

Requirements on bandpass resolution and measurement precision for LiteBIRD

In this work, we study the impact of an imperfect knowledge of the instrument bandpasses on the estimate of the tensor-to-scalar ratio $r$ in the context of the next-generation LiteBIRD satellite. We develop a pipeline to integrate over the bandpass transmission in both the time-ordered data (TOD) and the map-making processing steps. We introduce the systematic effect by having a mismatch between the ``real'', high resolution bandpass $\tau$, entering the TOD, and the estimated one $\tau_s$, used in the map-making. We focus on two aspects: the effect of degrading the $\tau_s$ resolution, and the addition of a Gaussian error $\sigma$ to $\tau_s$. To reduce the computational load of the analysis, the two effects are explored separately, for three representative LiteBIRD channels (40 GHz, 140 GHz and 402 GHz) and for three bandpass shapes. Computing the amount of bias on $r$, $\Delta r$, caused by these effects on a single channel, we find that a resolution $\lesssim 1.5$ GHz and $\sigma \lesssim 0.0089$ do not exceed the LiteBIRD budget allocation per systematic effect, $\Delta r < 6.5 \times 10^{-6}$. We then check that propagating separately the uncertainties due to a resolution of 1 GHz and a measurement error with $\sigma = 0.0089$ in all LiteBIRD frequency channels, for the most pessimistic bandpass shape of the three considered, still produces a $\Delta r < 6.5 \times 10^{-6}$. This is done both with the simple deprojection approach and with a blind component separation technique, the Needlet Internal Linear Combination (NILC). Due to the effectiveness of NILC in cleaning the systematic residuals, we have tested that the requirement on $\sigma$ can be relaxed to $\sigma \lesssim 0.05$. (Abridged)

astro-ph.CO↗

arXiv2024

Requirements on the gain calibration for LiteBIRD polarisation data with blind component separation

Future cosmic microwave background (CMB) experiments are primarily targeting a detection of the primordial $B$-mode polarisation. The faintness of this signal requires exquisite control of systematic effects which may bias the measurements. In this work, we derive requirements on the relative calibration accuracy of the overall polarisation gain ($\Delta g_\nu$) for LiteBIRD experiment, through the application of the blind Needlet Internal Linear Combination (NILC) foreground-cleaning method. We find that minimum variance techniques, as NILC, are less affected by gain calibration uncertainties than a parametric approach, which requires a proper modelling of these instrumental effects. The tightest constraints are obtained for frequency channels where the CMB signal is relatively brighter (166 GHz channel, $\Delta {g}_\nu \approx 0.16 \%$), while, with a parametric approach, the strictest requirements were on foreground-dominated channels. We then propagate gain calibration uncertainties, corresponding to the derived requirements, into all frequency channels simultaneously. We find that the overall impact on the estimated $r$ is lower than the required budget for LiteBIRD by almost a factor $5$. The adopted procedure to derive requirements assumes a simple Galactic model. We therefore assess the robustness of obtained results against more realistic scenarios by injecting the gain calibration uncertainties, according to the requirements, into LiteBIRD simulated maps and assuming intermediate- and high-complexity sky models. In this case, we employ the so-called Multi-Clustering NILC (MC-NILC) foreground-cleaning pipeline and obtain that the impact of gain calibration uncertainties on $r$ is lower than the LiteBIRD gain systematics budget for the intermediate-complexity sky model. For the high-complexity case, instead, it would be necessary to tighten the requirements by a factor $1.8$.

astro-ph.CO↗

arXiv2024

Multi-dimensional optimisation of the scanning strategy for the LiteBIRD space mission

Large angular scale surveys in the absence of atmosphere are essential for measuring the primordial $B$-mode power spectrum of the Cosmic Microwave Background (CMB). Since this proposed measurement is about three to four orders of magnitude fainter than the temperature anisotropies of the CMB, in-flight calibration of the instruments and active suppression of systematic effects are crucial. We investigate the effect of changing the parameters of the scanning strategy on the in-flight calibration effectiveness, the suppression of the systematic effects themselves, and the ability to distinguish systematic effects by null-tests. Next-generation missions such as LiteBIRD, modulated by a Half-Wave Plate (HWP), will be able to observe polarisation using a single detector, eliminating the need to combine several detectors to measure polarisation, as done in many previous experiments and hence avoiding the consequent systematic effects. While the HWP is expected to suppress many systematic effects, some of them will remain. We use an analytical approach to comprehensively address the mitigation of these systematic effects and identify the characteristics of scanning strategies that are the most effective for implementing a variety of calibration strategies in the multi-dimensional space of common spacecraft scan parameters. We also present Falcons, a fast spacecraft scanning simulator that we developed to investigate this scanning parameter space.

astro-ph.IM↗

arXiv2023

Impact of beam far side-lobe knowledge in the presence of foregrounds for LiteBIRD

We present a study of the impact of an uncertainty in the beam far side-lobe knowledge on the measurement of the Cosmic Microwave Background $B$-mode signal at large scale. It is expected to be one of the main source of systematic effects in future CMB observations. Because it is crucial for all-sky survey missions to take into account the interplays between beam systematic effects and all the data analysis steps, the primary goal of this paper is to provide the methodology to carry out the end-to-end study of their effect for a space-borne CMB polarization experiment, up to the cosmological results in the form of a bias $\delta r$ on the tensor-to-scalar ratio $r$. LiteBIRD is dedicated to target the measurement of CMB primordial $B$ modes by reaching a sensitivity of $\sigma \left( r \right) \leq 10^{-3}$ assuming $r=0$. As a demonstration of our framework, we derive the relationship between the knowledge of the beam far side-lobes and the tentatively allocated error budget under given assumptions on design, simulation and component separation method. We assume no mitigation of the far side-lobes effect at any stage of the analysis pipeline. We show that $\delta r$ is mostly due to the integrated fractional power difference between the estimated beams and the true beams in the far side-lobes region, with little dependence on the actual shape of the beams, for low enough $\delta r$. Under our set of assumptions, in particular considering the specific foreground cleaning method we used, we find that the integrated fractional power in the far side-lobes should be known at a level as tight as $\sim 10^{-4}$, to achieve the required limit on the bias $\delta r < 1.9 \times 10^{-5}$. The framework and tools developed for this study can be easily adapted to provide requirements under different design, data analysis frameworks and for other future space-borne experiments beyond LiteBIRD.

astro-ph.CO↗

arXiv2023

Tensor-to-scalar ratio forecasts for extended LiteBIRD frequency configurations

LiteBIRD is a planned JAXA-led CMB B-mode satellite experiment aiming for launch in the late 2020s, with a primary goal of detecting the imprint of primordial inflationary gravitational waves. Its current baseline focal-plane configuration includes 15 frequency bands between 40 and 402 GHz, fulfilling the mission requirements to detect the amplitude of gravitational waves with the total uncertainty on the tensor-to-scalar ratio, $\delta r$, down to $\delta r<0.001$. A key aspect of this performance is accurate astrophysical component separation, and the ability to remove polarized thermal dust emission is particularly important. In this paper we note that the CMB frequency spectrum falls off nearly exponentially above 300 GHz relative to the thermal dust SED, and a relatively minor high frequency extension can therefore result in even lower uncertainties and better model reconstructions. Specifically, we compare the baseline design with five extended configurations, while varying the underlying dust modeling, in each of which the HFT (High-Frequency Telescope) frequency range is shifted logarithmically towards higher frequencies, with an upper cutoff ranging between 400 and 600 GHz. In each case, we measure the tensor-to-scalar ratio $r$ uncertainty and bias using both parametric and minimum-variance component-separation algorithms. When the thermal dust sky model includes a spatially varying spectral index and temperature, we find that the statistical uncertainty on $r$ after foreground cleaning may be reduced by as much as 30--50 % by extending the upper limit of the frequency range from 400 to 600 GHz, with most of the improvement already gained at 500 GHz. We also note that a broader frequency range leads to better ability to discriminate between models through higher $\chi^2$ sensitivity. (abridged)

astro-ph.CO↗

arXiv2020

Planck intermediate results. LVII. Joint Planck LFI and HFI data processing

We present the NPIPE processing pipeline, which produces calibrated frequency maps in temperature and polarization from data from the Planck Low Frequency Instrument (LFI) and High Frequency Instrument (HFI) using high-performance computers. NPIPE represents a natural evolution of previous Planck analysis efforts, and combines some of the most powerful features of the separate LFI and HFI analysis pipelines. The net effect of the improvements is lower levels of noise and systematics in both frequency and component maps at essentially all angular scales, as well as notably improved internal consistency between the various frequency channels. Based on the NPIPE maps, we present the first estimate of the Solar dipole determined through component separation across all nine Planck frequencies. The amplitude is ($3366.6 \pm 2.7$)$μ$K, consistent with, albeit slightly higher than, earlier estimates. From the large-scale polarization data, we derive an updated estimate of the optical depth of reionization of $τ= 0.051 \pm 0.006$, which appears robust with respect to data and sky cuts. There are 600 complete signal, noise and systematics simulations of the full-frequency and detector-set maps. As a Planck first, these simulations include full time-domain processing of the beam-convolved CMB anisotropies. The release of NPIPE maps and simulations is accompanied with a complete suite of raw and processed time-ordered data and the software, scripts, auxiliary data, and parameter files needed to improve further on the analysis and to run matching simulations.

astro-ph.CO↗

arXiv2017

Exploring cosmic origins with CORE: effects of observer peculiar motion

We discuss the effects on the CMB, CIB, and thermal SZ effect due to the peculiar motion of an observer with respect to the CMB rest frame, which induces boosting effects. We investigate the scientific perspectives opened by future CMB space missions, focussing on the CORE proposal. The improvements in sensitivity offered by a mission like CORE, together with its high resolution over a wide frequency range, will provide a more accurate estimate of the CMB dipole. The extension of boosting effects to polarization and cross-correlations will enable a more robust determination of purely velocity-driven effects that are not degenerate with the intrinsic CMB dipole, allowing us to achieve a S/N ratio of 13; this improves on the Planck detection and essentially equals that of an ideal cosmic-variance-limited experiment up to a multipole l of 2000. Precise inter-frequency calibration will offer the opportunity to constrain or even detect CMB spectral distortions, particularly from the cosmological reionization, because of the frequency dependence of the dipole spectrum, without resorting to precise absolute calibration. The expected improvement with respect to COBE-FIRAS in the recovery of distortion parameters (in principle, a factor of several hundred for an ideal experiment with the CORE configuration) ranges from a factor of several up to about 50, depending on the quality of foreground removal and relative calibration. Even for 1% accuracy in both foreground removal and relative calibration at an angular scale of 1 deg, we find that dipole analyses for a mission like CORE will be able to improve the recovery of the CIB spectrum amplitude by a factor of 17 in comparison with current results based on FIRAS. In addition to the scientific potential of a mission like CORE for these analyses, synergies with other planned and ongoing projects are also discussed.

astro-ph.CO↗

arXiv2017

Exploring cosmic origins with CORE: mitigation of systematic effects

We present an analysis of the main systematic effects that could impact the measurement of CMB polarization with the proposed CORE space mission. We employ timeline-to-map simulations to verify that the CORE instrumental set-up and scanning strategy allow us to measure sky polarization to a level of accuracy adequate to the mission science goals. We also show how the CORE observations can be processed to mitigate the level of contamination by potentially worrying systematics, including intensity-to-polarization leakage due to bandpass mismatch, asymmetric main beams, pointing errors and correlated noise. We use analysis techniques that are well validated on data from current missions such as Planck to demonstrate how the residual contamination of the measurements by these effects can be brought to a level low enough not to hamper the scientific capability of the mission, nor significantly increase the overall error budget. We also present a prototype of the CORE photometric calibration pipeline, based on that used for Planck, and discuss its robustness to systematics, showing how CORE can achieve its calibration requirements. While a fine-grained assessment of the impact of systematics requires a level of knowledge of the system that can only be achieved in a future study phase, the analysis presented here strongly suggests that the main areas of concern for the CORE mission can be addressed using existing knowledge, techniques and algorithms.

astro-ph.CO↗

arXiv2017

Exploring Cosmic Origins with CORE: B-mode Component Separation

We demonstrate that, for the baseline design of the CORE satellite mission, the polarized foregrounds can be controlled at the level required to allow the detection of the primordial cosmic microwave background (CMB) $B$-mode polarization with the desired accuracy at both reionization and recombination scales, for tensor-to-scalar ratio values of ${r\gtrsim 5\times 10^{-3}}$. We consider detailed sky simulations based on state-of-the-art CMB observations that consist of CMB polarization with $τ=0.055$ and tensor-to-scalar values ranging from $r=10^{-2}$ to $10^{-3}$, Galactic synchrotron, and thermal dust polarization with variable spectral indices over the sky, polarized anomalous microwave emission, polarized infrared and radio sources, and gravitational lensing effects. Using both parametric and blind approaches, we perform full component separation and likelihood analysis of the simulations, allowing us to quantify both uncertainties and biases on the reconstructed primordial $B$-modes. Under the assumption of perfect control of lensing effects, CORE would measure an unbiased estimate of $r=\left(5 \pm 0.4\right)\times 10^{-3}$ after foreground cleaning. In the presence of both gravitational lensing effects and astrophysical foregrounds, the significance of the detection is lowered, with CORE achieving a $4σ$-measurement of $r=5\times 10^{-3}$ after foreground cleaning and $60$% delensing. For lower tensor-to-scalar ratios ($r=10^{-3}$) the overall uncertainty on $r$ is dominated by foreground residuals, not by the 40% residual of lensing cosmic variance. Moreover, the residual contribution of unprocessed polarized point-sources can be the dominant foreground contamination to primordial B-modes at this $r$ level, even on relatively large angular scales, $\ell \sim 50$. Finally, we report two sources of potential bias for the detection of the primordial $B$-modes.[abridged]

astro-ph.CO↗

arXiv2017

Exploring Cosmic Origins with CORE: Extragalactic sources in Cosmic Microwave Background maps

We discuss the potential of a next generation space-borne Cosmic Microwave Background (CMB) experiment for studies of extragalactic sources. Our analysis has particular bearing on the definition of the future space project, CORE, that has been submitted in response to ESA's call for a Medium-size mission opportunity as the successor of the Planck satellite. Even though the effective telescope size will be somewhat smaller than that of Planck, CORE will have a considerably better angular resolution at its highest frequencies, since, in contrast with Planck, it will be diffraction limited at all frequencies. The improved resolution implies a considerable decrease of the source confusion, i.e. substantially fainter detection limits. In particular, CORE will detect thousands of strongly lensed high-z galaxies distributed over the full sky. The extreme brightness of these galaxies will make it possible to study them, via follow-up observations, in extraordinary detail. Also, the CORE resolution matches the typical sizes of high-z galaxy proto-clusters much better than the Planck resolution, resulting in a much higher detection efficiency; these objects will be caught in an evolutionary phase beyond the reach of surveys in other wavebands. Furthermore, CORE will provide unique information on the evolution of the star formation in virialized groups and clusters of galaxies up to the highest possible redshifts. Finally, thanks to its very high sensitivity, CORE will detect the polarized emission of thousands of radio sources and, for the first time, of dusty galaxies, at mm and sub-mm wavelengths, respectively.

astro-ph.GA↗

arXiv2017

Exploring Cosmic Origins with CORE: Cluster Science

We examine the cosmological constraints that can be achieved with a galaxy cluster survey with the future CORE space mission. Using realistic simulations of the millimeter sky, produced with the latest version of the Planck Sky Model, we characterize the CORE cluster catalogues as a function of the main mission performance parameters. We pay particular attention to telescope size, key to improved angular resolution, and discuss the comparison and the complementarity of CORE with ambitious future ground-based CMB experiments that could be deployed in the next decade. A possible CORE mission concept with a 150 cm diameter primary mirror can detect of the order of 50,000 clusters through the thermal Sunyaev-Zeldovich effect (SZE). The total yield increases (decreases) by 25% when increasing (decreasing) the mirror diameter by 30 cm. The 150 cm telescope configuration will detect the most massive clusters ($>10^{14}\, M_\odot$) at redshift $z>1.5$ over the whole sky, although the exact number above this redshift is tied to the uncertain evolution of the cluster SZE flux-mass relation; assuming self-similar evolution, CORE will detect $\sim 500$ clusters at redshift $z>1.5$. This changes to 800 (200) when increasing (decreasing) the mirror size by 30 cm. CORE will be able to measure individual cluster halo masses through lensing of the cosmic microwave background anisotropies with a 1-$σ$ sensitivity of $4\times10^{14} M_\odot$, for a 120 cm aperture telescope, and $10^{14} M_\odot$ for a 180 cm one. [abridged]

astro-ph.CO↗

arXiv2014

Impact of particles on the Planck HFI detectors: Ground-based measurements and physical interpretation

The Planck High Frequency Instrument (HFI) surveyed the sky continuously from August 2009 to January 2012. Its noise and sensitivity performance were excellent, but the rate of cosmic ray impacts on the HFI detectors was unexpectedly high. Furthermore, collisions of cosmic rays with the focal plane produced transient signals in the data (glitches) with a wide range of characteristics. A study of cosmic ray impacts on the HFI detector modules has been undertaken to categorize and characterize the glitches, to correct the HFI time-ordered data, and understand the residual effects on Planck maps and data products. This paper presents an evaluation of the physical origins of glitches observed by the HFI detectors. In order to better understand the glitches observed by HFI in flight, several ground-based experiments were conducted with flight-spare HFI bolometer modules. The experiments were conducted between 2010 and 2013 with HFI test bolometers in different configurations using varying particles and impact energies. The bolometer modules were exposed to 23 MeV protons from the Orsay IPN TANDEM accelerator, and to $^{241}$Am and $^{244}$Cm $α$-particle and $^{55}$Fe radioactive X-ray sources. The calibration data from the HFI ground-based preflight tests were used to further characterize the glitches and compare glitch rates with statistical expectations under laboratory conditions. Test results provide strong evidence that the dominant family of glitches observed in flight are due to cosmic ray absorption by the silicon die substrate on which the HFI detectors reside. Glitch energy is propagated to the thermistor by ballistic phonons, while there is also a thermal diffusion contribution. The implications of these results for future satellite missions, especially those in the far-infrared to sub-millimetre and millimetre regions of the electromagnetic spectrum, are discussed.

astro-ph.IM↗

arXiv2014

Study of Cosmic Ray Impact on Planck/HFI Low Temperature Detectors

After the focal plane of the HFI instrument of the Planck mission (launched in May 2009) reached its operational temperature, we observed thermal signatures of interactions of cosmic rays with the Planck satellite, located at the L2 Lagrange point. When a particle hits a component of the bolometers (e.g. thermometer, grid or wafer) mounted on the focal plane of HFI, a thermal spike (called glitch) due to energy deposition is measured. Processing these data revealed another effect due to particle showers of high energy cosmic rays: High Coincidence Events (HCE), composed of glitches occurring coincidentally in many detectors followed by a temperature increase from the nK to the uK. A flux of about 100 HCE per hour has been estimated. Two types of HCE have been detected: fast and slow. For the first type, the untouched bolometers reached, within a few seconds, the same temperature as those which were "touched". This can be explained by the storage of the energy deposited in the stainless steel focal plane. The second type of HCE is not fully understood yet. These effects might be explained by an extra conduction due to the helium released by cryogenic surfaces and creating a temporary thermal link between the different stages of the HFI.

astro-ph.IM↗