arXiv subjects

G. R. Tynan

Publications and source records attributed to G. R. Tynan.

10 recordsLinked to original sources

arXiv2026

Empirical impact of near-separatrix plasma and neutral transport on the pedestal in the transition between EDA and ELMy H-modes on Alcator C-Mod

The transition between the ELMy H-mode and the EDA H-mode is studied on Alcator C-Mod using an experimental database and predictive pedestal models. High-resolution Thomson scattering measurements are used to compare the pedestal density, $n_{e}^\mathrm{ped}$, and the separatrix density, $n_{e}^\mathrm{sep}$ with main chamber neutral measurements. $n_{e}^\mathrm{ped}$ is sensitive to neutral sources only in the ELMy H-mode regime and not in the EDA H-mode regime. Density fluctuation spectra reveal that quasi-coherent structures become stronger at higher densities and more coherent in the EDA relative to the inter-ELM phases of ELMy H-modes, before weakening again at the highest values of $n_{e}^\mathrm{ped}$. The Saarelma-Connor pedestal density prediction model is validated for ELMy H-modes up to $n_{e}^\mathrm{ped} = 2.0 \times 10^{20}$ m$^{-3}$. An additional transport channel driven by resistive ballooning modes (RBM), $D_\mathrm{RBM}$, scaling directly with $α_{t}$ and inversely with $k_\mathrm{RBM}^{2}\hat{q}_\mathrm{cyl}$ is shown to improve the prediction for EDA H-modes, finding good model agreement up to $n_{e}^\mathrm{ped} = 3.0 \times 10^{20}$ m$^{-3}$. EPED scans in $n_{e}^\mathrm{ped}$ are then performed at three values of $n_{e}^\mathrm{sep}/n_{e}^\mathrm{ped}$. Increasing this ratio moves the peeling-ballooning branch transition to lower $n_{e}^\mathrm{ped}$, increasing $p^\mathrm{ped}$ in the peeling branch and decreasing it in the ballooning branch. Agreement is found for large ELM H-modes. SPARC pedestal density predictions for an ELMy and an EDA/QCE-like H-mode are performed and found consistent with assumptions used in previous EPED modeling. Inclusion of $D_\mathrm{RBM}$ significantly weakens the density gradient near the separatrix, lowering $n_{e}^\mathrm{ped}$ by approximately 20%.

physics.plasm-ph↗

arXiv2026

Experimental Evidence for Increased Particle Fluxes Due to a Change in Transport at the Separatrix near Density Limits on Alcator C-Mod

Experimental inferences of cross-field particle flux at the separatrix, $Γ_{\perp}^\mathrm{sep}$, show rapid growth near H-mode and L-mode density limits at high magnetic field on Alcator C-Mod. Increases in $Γ_{\perp}^\mathrm{sep}$ correlate well with proximity to high density operational boundaries as proposed by the separatrix operational space model. $Γ_{\perp}^\mathrm{sep}$ grows as the L-mode density limit and the H-L-mode back transition boundaries are approached, consistent with expectations of plasma instability-driven turbulence suggested by theory, confirming the power dependence of density limits. $Γ_{\perp}^\mathrm{sep}$ is well-organized by the characteristic wavenumber for resistive ballooning mode turbulence, $k_\mathrm{RBM}$, from interchange-drift-Alfvén fluid turbulence theory, with additional dependence on the cylindrical safety factor, $\hat{q}_\mathrm{cyl}$, yielding an empirical limit to plasma operation of $k_\mathrm{RBM}^{2}\hat{q}_\mathrm{cyl} = 1$. This limit corresponds to the point where the perpendicular heat flux, $Q_{\perp}$, reaches the level of the parallel heat flux, $Q_{\parallel}$, i.e. $Q_{\perp} \approx Q_{\parallel}$, beyond which point thermal equilibrium is not satisfied, resulting in a fold catastrophe.

physics.plasm-ph↗

arXiv2025

Disentangling Core and Edge Mechanisms of the Density Limit in DIII-D Negative Triangularity Plasmas

The density limit is investigated in the DIII-D negative triangularity (NT) plasmas which lack a standard H-mode edge. We find the limit may not be a singular disruptive boundary but a multifaceted density saturation phenomenon governed by distinct core and edge transport mechanisms. Sustained, non-disruptive operation is achieved at densities up to 1.8 times the Greenwald limit ($n_\mathrm{G}$) until the termination of auxiliary heating. Systematic power scans reveal distinct power scalings for the core ($n_e \propto P_\mathrm{SOL}^{0.27\pm0.03}$) and edge ($n_e \propto P_\mathrm{SOL}^{0.42\pm0.04}$) density limits. The edge density saturation is triggered abruptly by the onset of a non-disruptive, high-field side radiative instability that clamps the edge density below $n_\mathrm{G}$. In contrast, the core density continues to rise until it saturates, a state characterized by substantially enhanced core turbulence. Core transport evolves from a diffusive to an intermittent, avalanche-like state, as indicated by heavy-tailed probability density functions (kurtosis $\approx 6$), elevated Hurst exponents, and a $1/f$-type power spectrum. These findings suggest that the density limit in the low-confinement regime is determined by a combination of edge radiative instabilities and core turbulent transport. This distinction provides separate targets for control strategies aimed at extending the operational space of future fusion devices.

physics.plasm-ph↗

arXiv2024

Determination of confinement regime boundaries via separatrix parameters on Alcator C-Mod based on a model for interchange-drift-Alfvén turbulence

The separatrix operational space (SepOS) model [Eich \& Manz, \emph{Nuclear Fusion} (2021)] is shown to predict the L-H transition, the L-mode density limit, and the ideal MHD ballooning limit in terms of separatrix parameters for a wide range of Alcator C-Mod plasmas. The model is tested using Thomson scattering measurements across a wide range of operating conditions on C-Mod, spanning $\overline{n}_{e} = 0.3 - 5.5 \times 10^{20}$m$^{-3}$, $B_{t} = 2.5 - 8.0$ T, and $B_{p} = 0.1 - 1.2$ T. An empirical regression for the electron pressure gradient scale length, $λ_{p_{e}}$, against a turbulence control parameter, $α_{t}$, and the poloidal fluid gyroradius, $ρ_{s,p}$, for H-modes is constructed and found to require positive exponents for both regression parameters, indicating turbulence widening of near-SOL widths at high $α_{t}$ and an inverse scaling with $B_{p}$, consistent with results on AUG. The SepOS model is also tested in the unfavorable drift direction and found to apply well to all three boundaries, including the L-H transition as long as a correction to the Reynolds energy transfer term, $α_\mathrm{RS} < 1$ is applied. I-modes typically exist in the unfavorable drift direction for values of $α_{t} \lesssim 0.35$. Finally, an experiment studying the transition between the type-I ELMy and EDA H-mode is analyzed using the same framework. It is found that a recently identified boundary at $α_{t} = 0.55$ excludes most EDA H-modes but that the balance of wavenumbers responsible for the L-mode density limit, namely $k_\mathrm{EM} = k_\mathrm{RBM}$, may better describe the transition on C-Mod. The ensemble of boundaries validated and explored is then applied to project regime access and limit avoidance for the SPARC primary reference discharge parameters.

physics.plasm-ph↗

arXiv2020

Ion heating in the PISCES-RF liquid-cooled high-power, steady-state, helicon plasma device

Radio Frequency (RF) driven helicon plasma sources are commonly used for their ability to produce high-density argon plasmas (n > 10^19/m^3) at relatively moderate powers (typical RF power < 2 kW). Typical electron temperatures are < 10 eV and typical ion temperatures are < 0.6 eV. A newly designed helicon antenna assembly (with concentric, double-layered, fully liquid-cooled RF-transparent windows) operates in steady-state at RF powers up to 10 kW. We report on the dependence of argon plasma density, electron temperature and ion temperature on RF power. At 10 kW, ion temperatures > 2 eV in argon plasmas are measured with laser induced fluorescence, which is consistent with a simple volume averaged 0-D power balance model. 1-D Monte Carlo simulations of the neutral density profile for these plasma conditions show strong neutral depletion near the core and predict neutral temperatures well above room temperatures. The plasmas created in this high-power helicon source (when light ions are employed) are ideally suited for fusion divertor plasma-material interaction studies and negative ion production for neutral beams.

physics.plasm-ph↗

arXiv2018

Tracing the Pathway from Drift-Wave Turbulence with Broken Symmetry to the Generation of Sheared Axial Mean Flow

This study traces the emergence of sheared axial flow from collisional drift wave turbulence with broken symmetry in a linear plasma device---CSDX. As the density profile steepens, the axial Reynolds stress develops and drives a radially sheared axial flow that is parallel to the magnetic field. Results show that the non-diffusive piece of the Reynolds stress is driven by the density gradient and results from the spectral asymmetry of the turbulence and thus is dynamical in origin. Taken together, these findings constitute the first simultaneous demonstration of the causal link between the density gradient, turbulence and stress with broken spectral symmetry, and the mean axial flow.

physics.plasm-ph↗

arXiv2018

Generation of parasitic axial flow by drift wave turbulence with broken symmetry: Theory and experiment

Detailed measurements of intrinsic axial flow generation parallel to the magnetic field in the controlled shear decorrelation experiment linear plasma device with no axial momentum input are presented and compared to theory. The results show a causal link from the density gradient to drift-wave turbulence with broken spectral symmetry and development of the axial mean parallel flow. As the density gradient steepens, the axial and azimuthal Reynolds stresses increase and radially sheared azimuthal and axial mean flows develop. A turbulent axial momentum balance analysis shows that the axial Reynolds stress drives the radially sheared axial mean flow. The turbulent drive (Reynolds power) for the azimuthal flow is an order of magnitude greater than that for axial flow, suggesting that the turbulence fluctuation levels are set by azimuthal flow shear regulation. The direct energy exchange between axial and azimuthal mean flows is shown to be insignificant. Therefore, the axial flow is parasitic to the turbulence-zonal flow system and is driven primarily by the axial turbulent stress generated by that system. The non-diffusive, residual part of the axial Reynolds stress is found to be proportional to the density gradient and is formed due to dynamical asymmetry in the drift-wave turbulence.

physics.plasm-ph↗

arXiv2018

Characterization of SOL Plasma Flows and Potentials in Alcator C-Mod

Gas-puff imaging techniques are employed to determine the far SOL region radial electric field and the plasma potential in ICRF heated discharges in the Alcator C-Mod tokamak. The 2-dimensional velocity fields of the turbulent structures, which are advected by RF-induced $ \mathbf{E\times B} $ flows, are obtained via the time-delay estimation (TDE) techniques. Both the magnitude and radial extension of the radial electric field $ E_r $ are observed to increase with the toroidal magnetic field strength $ B_φ$ and the ICRF power. In particular, the RF-induced $ E_r $ extends from the vicinity of the ICRF antenna to the separatrix when $ B_φ=7.9\,\mathrm{T} $ and $ P_{\mathrm{ICRF}} \gtrsim 1\,\mathrm{MW} $. In addition, low-Z impurity seeding near the antenna is found to substantially reduce the sheath potential associated with ICRF power. The ICRF-induced potentials are also estimated in different antenna configurations: (1) conventional toroidally-aligned (TA) antenna versus field-aligned (FA) antenna; (2) FA monopole versus FA dipole. Results show that FA and TA antennas produce similar magnitude of plasma potentials, and the FA monopole induced greater potential than the FA dipole phasing.

physics.plasm-ph↗

arXiv2018

Edge Shear Flows and Particle Transport near the Density Limit in the HL-2A Tokamak

Edge shear flow and its effect on regulating turbulent transport have long been suspected to play an important role in plasmas operating near the Greenwald density limit $ n_G $. In this study, equilibrium profiles as well as the turbulent particle flux and Reynolds stress across the separatrix in the HL-2A tokamak are examined as $ n_G $ is approached in ohmic L-mode discharges. As the normalized line-averaged density $ \bar{n}_e/n_G $ is raised, the shearing rate of the mean poloidal flow $ ω_{\rm sh} $ drops, and the turbulent drive for the low-frequency zonal flow (the Reynolds power $ \mathcal{P}_{Re} $) collapses. Correspondingly, the turbulent particle transport increases drastically with increasing collision rates. The geodesic acoustic modes (GAMs) gain more energy from the ambient turbulence at higher densities, but have smaller shearing rate than low-frequency zonal flows. The increased density also introduces decreased adiabaticity which not only enhances the particle transport but is also related to a reduction in the eddy-tilting and the Reynolds power. Both effects may lead to the cooling of edge plasmas and therefore the onset of MHD instabilities that limit the plasma density.

physics.plasm-ph↗

arXiv2017

A fast low-to-high mode bifurcation dynamics in a tokamak edge plasma gyrokinetic simulation

Transport barrier formation and its relation to sheared flows in fluids and plasmas are of fundamental interest in various natural and laboratory observations and of critical importance in achieving an economical energy production in a magnetic fusion device. Here we report the first observation of an edge transport barrier formation event in a gyrokinetic simulation carried out in a realistic tokamak edge geometry. The results show that turbulent Reynolds stress driven sheared ExB flows act in concert with neoclassical orbit loss to quench turbulent transport and form a transport barrier just inside the last closed magnetic flux surface.

physics.plasm-ph↗