arXiv subjects

G. Romano

Publications and source records attributed to G. Romano.

14 recordsLinked to original sources

arXiv2013

One-bit Decentralized Detection with a Rao Test for Multisensor Fusion

In this letter we propose the Rao test as a simpler alternative to the generalized likelihood ratio test (GLRT) for multisensor fusion. We consider sensors observing an unknown deterministic parameter with symmetric and unimodal noise. A decision fusion center (DFC) receives quantized sensor observations through error-prone binary symmetric channels and makes a global decision. We analyze the optimal quantizer thresholds and we study the performance of the Rao test in comparison to the GLRT. Also, a theoretical comparison is made and asymptotic performance is derived in a scenario with homogeneous sensors. All the results are confirmed through simulations.

cs.IT↗

arXiv2013

Performance Analysis and Design of Maximum Ratio Combining in Channel-Aware MIMO Decision Fusion

In this paper we present a theoretical performance analysis of the maximum ratio combining (MRC) rule for channel-aware decision fusion over multiple-input multiple-output (MIMO) channels for (conditionally) dependent and independent local decisions. The system probabilities of false alarm and detection conditioned on the channel realization are derived in closed form and an approximated threshold choice is given. Furthermore, the channel-averaged (CA) performances are evaluated in terms of the CA system probabilities of false alarm and detection and the area under the receiver operating characteristic (ROC) through the closed form of the conditional moment generating function (MGF) of the MRC statistic, along with Gauss-Chebyshev (GC) quadrature rules. Furthermore, we derive the deflection coefficients in closed form, which are used for sensor threshold design. Finally, all the results are confirmed through Monte Carlo simulations.

cs.IT↗

arXiv2012

Optimality of Received Energy in Decision Fusion over Rayleigh Fading Diversity MAC with Non-Identical Sensors

Received-energy test for non-coherent decision fusion over a Rayleigh fading multiple access channel (MAC) without diversity was recently shown to be optimum in the case of conditionally mutually independent and identically distributed (i.i.d.) sensor decisions under specific conditions [1], [2]. Here, we provide a twofold generalization, allowing sensors to be non identical on one hand and introducing diversity on the other hand. Along with the derivation, we provide also a general tool to verify optimality of the the received energy test in scenarios with correlated sensor decisions. Finally, we derive an analytical expression of the effect of the diversity on the large-system performances, under both individual and total power constraints.

cs.IT↗

arXiv2012

A new approach for improving global critical current density in Fe(Se0.5Te0.5) polycrystalline materials

A novel method to prepare bulk Fe(Se0.5Te0.5) samples is presented, based on a melting process and a subsequent annealing treatment. With respect to the standard sintering technique, it produces much more homogeneous and denser samples, characterized by large and well interconnected grains. The resulting samples exhibit optimal critical temperature values, sharp resistive and magnetic transitions, large magnetic hysteresis loops and high upper critical fields are observed. Interestingly, the global critical current density is much enhanced as compared to the values reported in literature for bulk samples of the same 11 family, reaching about 103 A/cm2 at zero field at 4.2 K as assessed by magnetic, transport and magneto-optical techniques. Even more importantly, its field dependence turns out to be very weak, such that at μ_{0}H = 7 T it is suppressed only by a factor \sim2.

cond-mat.supr-con↗

arXiv2011

Measurement of charm production in neutrino charged-current interactions

The nuclear emulsion target of the CHORUS detector was exposed to the wide-band neutrino beam of the CERN SPS of 27 GeV average neutrino energy from 1994 to 1997. In total about 100000 charged-current neutrino interactions with at least one identified muon were located in the emulsion target and fully reconstructed, using newly developed automated scanning systems. Charmed particles were searched for by a program recognizing particle decays. The observation of the decay in nuclear emulsion makes it possible to select a sample with very low background and minimal kinematical bias. 2013 charged-current interactions with a charmed hadron candidate in the final state were selected and confirmed through visual inspection. The charm production rate induced by neutrinos relative to the charged-current cross-section is measured to be sigma(nu_mu N -> mu- C X)/sigma(CC) = (5.75 +-0.32 stat +-0.30 syst)%. The charm production cross-section as a function of the neutrino energy is also obtained. The results are in good agreement with previous measurements. The charm-quark hadronization produces the following charmed hadrons with relative fractions (in %): f_Dzero = 43.7+-4.5, f_Lambda_c^plus = 19.2+-4.2, f_Dplus = 25.3+-4.2, and f_D_splus = 11.8+-4.7.

hep-ex↗

arXiv2009

Study of the MgB2 grain size role in ex-situ multifilamentary wires with thin filaments

The MgB2 superconductor has already demonstrated its applicative potential, in particular for DC applications such as MRI magnets, thanks to the low costs of the raw materials and to its simple production process. However further efforts have still to be made in order to broaden its employment also towards the AC applications such as SFCL, motors, transformers. The main issues are related to the reduction of the AC losses. Some of these can be faced by obtaining multifilamentary conductors with a large number of very fine filaments and, in this context, the powders granulometry can play a crucial role. We have prepared MgB2 starting powders with different granulometries and by the ex-situ P.I.T method we have realized multifilamentary wires with a number of filaments up to 361 and an average size of each filament lowered down to 30 microns. In particular we have studied the relationship between grain and filament size in terms of transport properties and show that the optimization of this ratio is possible in order to obtain suitable conductors for AC industrial applications.

cond-mat.supr-con↗

arXiv2008

Effect of grain refinement on enhancing critical current density and upper critical field in undoped MgB2 ex-situ tapes

Ex-situ Powder-In-Tube MgB2 tapes prepared with ball-milled, undoped powders showed a strong enhancement of the irreversibility field H*, the upper critical field Hc2 and the critical current density Jc(H) together with the suppression of the anisotropy of all of these quantities. Jc reached 104 A/cm2 at 4.2 K and 10 T, with an irreversibility field of about 14 T at 4.2 K, and Hc2 of 9 T at 25 K, high values for not-doped MgB2. The enhanced Jc and H* values are associated with significant grain refinement produced by milling of the MgB2 powder, which enhances grain boundary pinning, although at the same time also reducing the connectivity from about 12% to 8%. Although enhanced pinning and diminished connectivity are in opposition, the overall influence of ball milling on Jc is positive because the increased density of grains with a size comparable with the mean free path produces strong electron scattering that substantially increases Hc2, especially Hc2 perpendicular to the Mg and B planes.

cond-mat.supr-con↗

arXiv2008

Resonant electron heating and molecular phonon cooling in single C$_{60}$ junctions

We study heating and heat dissipation of a single \c60 molecule in the junction of a scanning tunneling microscope (STM) by measuring the electron current required to thermally decompose the fullerene cage. The power for decomposition varies with electron energy and reflects the molecular resonance structure. When the STM tip contacts the fullerene the molecule can sustain much larger currents. Transport simulations explain these effects by molecular heating due to resonant electron-phonon coupling and molecular cooling by vibrational decay into the tip upon contact formation.

cond-mat.mtrl-sci↗

arXiv2007

Track reconstruction in the emulsion-lead target of the OPERA experiment using the ESS microscope

The OPERA experiment, designed to conclusively prove the existence of $\rm ν_μ\to ν_τ$ oscillations in the atmospheric sector, makes use of a massive lead-nuclear emulsion target to observe the appearance of $\rm ν_τ$'s in the CNGS $\rm ν_μ$ beam. The location and analysis of the neutrino interactions in quasi real-time required the development of fast computer-controlled microscopes able to reconstruct particle tracks with sub-micron precision and high efficiency at a speed of 20 cm^2 / h. This paper describes the performance in particle track reconstruction of the European Scanning System, a novel automatic microscope for the measurement of emulsion films developed for OPERA.

physics.ins-det↗

arXiv2007

Electron/pion separation with an Emulsion Cloud Chamber by using a Neural Network

We have studied the performance of a new algorithm for electron/pion separation in an Emulsion Cloud Chamber (ECC) made of lead and nuclear emulsion films. The software for separation consists of two parts: a shower reconstruction algorithm and a Neural Network that assigns to each reconstructed shower the probability to be an electron or a pion. The performance has been studied for the ECC of the OPERA experiment [1]. The $e/π$ separation algorithm has been optimized by using a detailed Monte Carlo simulation of the ECC and tested on real data taken at CERN (pion beams) and at DESY (electron beams). The algorithm allows to achieve a 90% electron identification efficiency with a pion misidentification smaller than 1% for energies higher than 2 GeV.

physics.data-an↗

arXiv2006

Hardware performance of a scanning system for high speed analysis of nuclear emulsions

The use of nuclear emulsions in very large physics experiments is now possible thanks to the recent improvements in the industrial production of emulsions and to the development of fast automated microscopes. In this paper the hardware performances of the European Scanning System (ESS) are described. The ESS is a very fast automatic system developed for the mass scanning of the emulsions of the OPERA experiment, which requires microscopes with scanning speeds of about 20 cm^2/h in an emulsion volume of 44 micron thickness.

physics.ins-det↗

arXiv2005

Search for spontaneous muon emission from lead nuclei

We describe a possible search for muonic radioactivity from lead nuclei using the base elements ("bricks" composed by lead and nuclear emulsion sheets) of the long-baseline OPERA neutrino experiment. We present the results of a Monte Carlo simulation concerning the expected event topologies and estimates of the background events. Using few bricks, we could reach a good sensitivity level.

hep-ex↗

arXiv1999

SySal: System of Salerno

SySal (SYstem of SALerno) is the automatic scanning system developed in the emulsion laboratory of Salerno to take part in the emulsion scanning phase of the CHORUS experiment at CERN. In the following chapters we will present features, results and further developments of this automatic multi-tracking system.

hep-ex↗

arXiv1999

Status of Salerno Laboratory (Measurements in Nuclear Emulsion)

A report on the analysis work in the Salerno Emulsion Laboratory is presented. It is related to the search for nu_mu->nu_tau oscillations in CHORUS experiment, the calibrations in the WANF (West Area Neutrino Facility) at Cern and tests and preparation for new experiments.

hep-ex↗