arXiv subjects

G. Rossi

Publications and source records attributed to G. Rossi.

230 records · Page 13Linked to original sources

arXiv2022

Testing of planar hydrogenated amorphous silicon sensors with charge selective contacts for the construction of 3D- detectors

Hydrogenated Amorphous Silicon (a-Si:H) is a material well known for its intrinsic radiation hardness and is primarily utilized in solar cells as well as for particle detection and dosimetry. Planar p-i-n diode detectors are fabricated entirely by means of intrinsic and doped PECVD of a mixture of Silane (SiH4) and molecular Hydrogen. In order to develop 3D detector geometries using a-Si:H, two options for the junction fabrication have been considered: ion implantation and charge selective contacts through atomic layer deposition. In order to test the functionality of the charge selective contact electrodes, planar detectors have been fabricated utilizing this technique. In this paper, we provide a general overview of the 3D fabrication project followed by the results of leakage current measurements and x-ray dosimetric tests performed on planar diodes containing charge selective contacts to investigate the feasibility of the charge selective contact methodology for integration with the proposed 3D detector architectures.

physics.ins-det↗

arXiv2021

High repetition rate and coherent Free-Electron Laser in the tender X-rays based on the Echo-Enabled Harmonic Generation of an Ultra-Violet Oscillator pulse

Fine time-resolved analysis of matter - i.e. spectroscopy and photon scattering - in the linear response regime requires a fs-scale pulsed, high repetition rate, fully coherent X-ray source. A seeded Free-Electron Laser (FEL) driven by a Super-Conducting Linac, generating $10^{8}$-$10^{10}$ coherent photons at 2-5 keV with abou 0.5 MHz of repetition rate, can address this need. The seeding scheme proposed is the Echo-Enabled Harmonic Generation, alimented by a FEL Oscillator working at 13.6 nm with a cavity based on Mo-Si mirrors. The whole chain of the X-ray generation is here described by means of start-to-end simulations. Comparisons with the Self Amplified Spontaneus Emission and a fresh-bunch harmonic cascade performed with similar electron beams show the validity of this scheme.

physics.acc-ph↗

arXiv2020

Dark Energy Survey Year 3 Results: Clustering Redshifts -- Calibration of the Weak Lensing Source Redshift Distributions with redMaGiC and BOSS/eBOSS

We present the calibration of the Dark Energy Survey Year 3 (DES Y3) weak lensing source galaxy redshift distributions $n(z)$ from clustering measurements. In particular, we cross-correlate the weak lensing (WL) source galaxies sample with redMaGiC galaxies (luminous red galaxies with secure photometric redshifts) and a spectroscopic sample from BOSS/eBOSS to estimate the redshift distribution of the DES sources sample. Two distinct methods for using the clustering statistics are described. The first uses the clustering information independently to estimate the mean redshift of the source galaxies within a redshift window, as done in the DES Y1 analysis. The second method establishes a likelihood of the clustering data as a function of $n(z)$, which can be incorporated into schemes for generating samples of $n(z)$ subject to combined clustering and photometric constraints. Both methods incorporate marginalisation over various astrophysical systematics, including magnification and redshift-dependent galaxy-matter bias. We characterise the uncertainties of the methods in simulations; the first method recovers the mean $z$ of tomographic bins to RMS (precision) of $\sim 0.014$. Use of the second method is shown to vastly improve the accuracy of the shape of $n(z)$ derived from photometric data. The two methods are then applied to the DES Y3 data.

astro-ph.CO↗

arXiv2020

A tomographic map of the large-scale matter distribution using the eBOSS Stripe 82 Ly-$α$ forest

The Lyman-$α$ (hereafter Ly-$α$) forest is a probe of large-scale matter density fluctuations at high redshift, $z > 2.1$. It consists of HI absorption spectra along individual lines-of-sight. If the line-of-sight density is large enough, 3D maps of HI absorption can be inferred by tomographic reconstruction. In this article, we investigate the Ly-$α$ forest available in the Stripe 82 field ($220\,\mathrm{deg^{2}}$), based on the quasar spectra from SDSS Data Release DR16. The density of observed quasar spectra is $37\,\mathrm{deg^{-2}}$ with a mean pixel signal-to-noise ratio of two per angstrom. This study provides an intermediate case between the average SDSS density and that of the much denser but smaller CLAMATO survey. We derive a 3D map of large-scale matter fluctuations from these data, using a Wiener filter technique. The total volume of the map is $0.94\,\mathrm{h^{-3} Gpc^{3}}$. Its resolution is $13\,\mathrm{h^{-1} Mpc}$, which is related to the mean transverse distance between nearest lines-of-sight. From this map, we provide a catalog of voids and protocluster candidates in the cosmic web. The map-making and void catalog are compared to simulated eBOSS Stripe 82 observations. A stack over quasar positions provides a visualization of the Ly-$α$ quasar cross-correlation. This tomographic reconstruction constitutes the largest-volume high-redshift 3D map of matter fluctuations.

astro-ph.CO↗

arXiv2020

The clustering of the SDSS-IV extended Baryon Oscillation Spectroscopic Survey DR14 LRG sample: structure growth rate measurement from the anisotropic LRG correlation function in the redshift range 0.6 < z < 1.0

We analyze the anisotropic clustering of the Sloan Digital Sky Survey-IV Extended Baryon Oscillation Spectroscopic Survey (eBOSS) Luminous Red Galaxy Data Release 14 (DR14) sample combined with Baryon Oscillation Spectroscopic Survey (BOSS) CMASS sample of galaxies in the redshift range 0.6$<z<$1.0, which consists of 80,118 galaxies from eBOSS and 46,439 galaxies from the BOSS-CMASS sample. The eBOSS-CMASS Luminous Red Galaxy sample has a sky coverage of 1,844 deg$^2$, with an effective volume of 0.9 Gpc$^3$. The analysis was made in configuration space using a Legendre multipole expansion. The Redshift Space Distortion signal is modeled as a combination of the Convolution Lagrangian Perturbation Model and the Gaussian Streaming Model. We constrain the logarithmic growth of structure times the amplitude of dark matter density fluctuations, $f (z_{\rm eff})σ_8(z_{\rm eff})=0.454 \pm0.139 $, and the Alcock-Paczynski dilation scales which constraints the angular diameter distance $D_A(z_{eff})=1466.5 \pm 136.6 (r_s/r_s^{\rm fid})$ and $H(z_{\rm eff})=105.8 \pm 16 (r_s^{\rm fid}/r_s) \mathrm{km\,s^{-1}\,Mpc^{-1}}$, where $r_s$ is the sound horizon at the end of the baryon drag epoch and $r_s^{\rm fid}$ is its value in the fiducial cosmology at an effective redshift $z_{\rm eff}=0.72$. These results are in full agreement with the current $Λ$-Cold Dark Matter ($Λ$-CDM) cosmological model inferred from Planck measurements. This study is the first eBOSS LRG full-shape analysis i.e. including Redshift-Space Distortions (RSD) simultaneously with the Alcock-Paczynski (AP) effect and the Baryon Acoustic Oscillation (BAO) scale.

astro-ph.CO↗

arXiv2019

Proximity-induced ferromagnetism and chemical reactivity in few layers VSe2 heterostructures

Among Transition-Metal Dichalcogenides, mono and few-layers thick VSe2 has gained much recent attention following claims of intrinsic room-temperature ferromagnetism in this system, which have nonetheless proved controversial. Here, we address the magnetic and chemical properties of Fe/VSe2 heterostructure by combining element sensitive absorption spectroscopy and photoemission spectroscopy. Our x-ray magnetic circular dichroism results confirm recent findings that both native mono/few-layer and bulk VSe2 do not show any signature of an intrinsic ferromagnetic ordering. Nonetheless, we find that ferromagnetism can be induced, even at room temperature, after coupling with a Fe thin film layer, with antiparallel alignment of the moment on the V with respect to Fe. We further consider the chemical reactivity at the Fe/VSe2 interface and its relation with interfacial magnetic coupling.

cond-mat.mes-hall↗

arXiv2018

Electronic properties of type-II Weyl semimetal WTe$_2$. A review perspective

Currently, there is a flurry of research interest on materials with an unconventional electronic structure, and we have already seen significant progress in their understanding and engineering towards real-life applications. The interest erupted with the discovery of graphene and topological insulators in the previous decade. The electrons in graphene simulate massless Dirac Fermions with a linearly dispersing Dirac cone in their band structure, while in topological insulators, the electronic bands wind non-trivially in momentum space giving rise to gapless surface states and bulk bandgap. Weyl semimetals in condensed matter systems are the latest addition to this growing family of topological materials. Weyl Fermions are known in the context of high energy physics since almost the beginning of quantum mechanics. They apparently violate charge conservation rules, displaying the "chiral anomaly", with such remarkable properties recently theoretically predicted and experimentally verified to exist as low energy quasiparticle states in certain condensed matter systems. Not only are these new materials extremely important for our fundamental understanding of quantum phenomena, but also they exhibit completely different transport phenomena. For example, massless Fermions are susceptible to scattering from non-magnetic impurities. Dirac semimetals exhibit non-saturating extremely large magnetoresistance as a consequence of their robust electronic bands being protected by time reversal symmetry. These open up whole new possibilities for materials engineering and applications including quantum computing. In this review, we recapitulate some of the outstanding properties of WTe$_2$, namely, its non-saturating titanic magnetoresistance due to perfect electron and hole carrier balance up to a very high magnetic field observed for the very first time. (Continued. Please see the main article).

cond-mat.mtrl-sci↗

arXiv2018

The Sloan Digital Sky Survey Quasar Catalog: Fourteenth Data Release

We present the Data Release 14 Quasar catalog (DR14Q) from the extended Baryon Oscillation Spectroscopic Survey (eBOSS) of the Sloan Digital Sky Survey IV (SDSS-IV). This catalog includes all SDSS-IV/eBOSS objects that were spectroscopically targeted as quasar candidates and that are confirmed as quasars via a new automated procedure combined with a partial visual inspection of spectra, have luminosities $M_{\rm i} \left[ z=2 \right] < -20.5$ (in a $Λ$CDM cosmology with $H_0 = 70 \ {\rm km \ s^{-1} \ Mpc ^{-1}}$, $Ω_{\rm M} = 0.3$, and $Ω_{\rm Λ} = 0.7$), and either display at least one emission line with a full width at half maximum (FWHM) larger than $500 \ {\rm km \ s^{-1}}$ or, if not, have interesting/complex absorption features. The catalog also includes previously spectroscopically-confirmed quasars from SDSS-I, II and III. The catalog contains 526,356 quasars 144,046 are new discoveries since the beginning of SDSS-IV) detected over 9,376 deg$^2$ (2,044 deg$^2$ having new spectroscopic data available) with robust identification and redshift measured by a combination of principal component eigenspectra. The catalog is estimated to have about 0.5% contamination. The catalog identifies 21,877 broad absorption line quasars and lists their characteristics. For each object, the catalog presents SDSS five-band CCD-based photometry with typical accuracy of 0.03 mag. The catalog also contains X-ray, ultraviolet, near-infrared, and radio emission properties of the quasars, when available, from other large-area surveys.

astro-ph.GA↗

arXiv2017

Three-Dimensional Electronic Structure of type-II Weyl Semimetal WTe$_2$

By combining bulk sensitive soft-X-ray angular-resolved photoemission spectroscopy and accurate first-principles calculations we explored the bulk electronic properties of WTe$_2$, a candidate type-II Weyl semimetal featuring a large non-saturating magnetoresistance. Despite the layered geometry suggesting a two-dimensional electronic structure, we find a three-dimensional electronic dispersion. We report an evident band dispersion in the reciprocal direction perpendicular to the layers, implying that electrons can also travel coherently when crossing from one layer to the other. The measured Fermi surface is characterized by two well-separated electron and hole pockets at either side of the $Γ$ point, differently from previous more surface sensitive ARPES experiments that additionally found a significant quasiparticle weight at the zone center. Moreover, we observe a significant sensitivity of the bulk electronic structure of WTe$_2$ around the Fermi level to electronic correlations and renormalizations due to self-energy effects, previously neglected in first-principles descriptions.

cond-mat.mtrl-sci↗

arXiv2015

The Extended Baryon Oscillation Spectroscopic Survey: Variability Selection and Quasar Luminosity Function

The SDSS-IV/eBOSS has an extensive quasar program that combines several selection methods. Among these, the photometric variability technique provides highly uniform samples, unaffected by the redshift bias of traditional optical-color selections, when $z= 2.7 - 3.5$ quasars cross the stellar locus or when host galaxy light affects quasar colors at $z < 0.9$. Here, we present the variability selection of quasars in eBOSS, focusing on a specific program that led to a sample of 13,876 quasars to $g_{\rm dered}=22.5$ over a 94.5 deg$^2$ region in Stripe 82, an areal density 1.5 times higher than over the rest of the eBOSS footprint. We use these variability-selected data to provide a new measurement of the quasar luminosity function (QLF) in the redshift range $0.68 2.2$. Both models are constrained to be continuous at $z=2.2$. They present a flattening of the bright-end slope at large redshift. The LEDE model indicates a reduction of the break density with increasing redshift, but the evolution of the break magnitude depends on the parameterization. The models are in excellent accord, predicting quasar counts that agree within 0.3\% (resp., 1.1\%) to $g<22.5$ (resp., $g<23$). The models are also in good agreement over the entire redshift range with models from previous studies.

astro-ph.CO↗

arXiv2014

New approach for precise computation of Lyman-alpha forest power spectrum with hydrodynamical simulations

We present a suite of cosmological N-body simulations with cold dark matter and baryons aiming at modeling the low-density regions of the IGM as probed by the Lyman-$α$ forests at high redshift. The simulations are designed to match the requirements imposed by the quality of BOSS and eBOSS data. They are made using either 2x768$^3$ or 2x192$^3$ particles, spanning volumes ranging from (25 Mpc.h$^{-1})^3$ for high-resolution simulations to (100 Mpc.h$^{-1})^3$ for large-volume ones. Using a splicing technique, the resolution is further enhanced to reach the equivalent of simulations with 2x3072$^3$= 58 billion particles in a (100 Mpc.h$^{-1}$)^3 box size, i.e. a mean mass per gas particle of 1.2x10$^5$M_sun.h$^{-1}$. We show that the resulting power spectrum is accurate at the 2% level over the full range from a few Mpc to several tens of Mpc. We explore the effect on the one-dimensional transmitted-flux power spectrum of 4 cosmological parameters ($n_s, σ_8, Ω_m, H_0$) and 2 astrophysical parameters ($T_0, γ$) related to the heating rate of the IGM. By varying the input parameters around a central model chosen to be in agreement with the latest Planck results, we built a grid of simulations that allows the study of the impact on the flux power spectrum of these six relevant parameters. We improve upon previous studies by not only measuring the effect of each parameter individually, but also probing the impact of the simultaneous variation of each pair of parameters. We thus provide a full second-order expansion, including cross-terms, around our central model. We check the validity of the second-order expansion with independent simulations obtained either with different cosmological parameters or different seeds. Finally, a comparison to the one-dimensional Ly-$α$ forest power spectrum obtained with BOSS shows an excellent agreement.

astro-ph.CO↗

arXiv2010

Surface and bulk electronic structures of LaOFeAs studied by angle resolved photoemission spectroscopy

The electronic structure of LaOFeAs, a parent compound of iron-arsenic superconductors, is studied by angleresolved photoemission spectroscopy. By examining its dependence on photon energy, polarization, sodium dosing and the counting of Fermi surface volume, both the bulk and the surface contributions are identified. We find that a bulk band moves toward high binding energies below structural transition, and shifts smoothly across the spin density wave transition by about 25 meV. Our data suggest the band reconstruction may play a crucial role in the spin density wave transition, and the structural transition is driven by the short range magnetic order. For the surface states, both the LaO-terminated and FeAs-terminated components are revealed. Certain small band shifts are verified for the FeAs-terminated surface states in the spin density wave state, which is a reflection of the bulk electronic structure reconstruction. Moreover, sharp quasiparticle peaks quickly rise at low temperatures, indicating of drastic reduction of the scattering rate. A kink structure in one of the surface band is shown to be possibly related to the electron-phonon interactions.

cond-mat.supr-con↗

arXiv2010

Stress release mechanisms for Cu on Pd(111) in the submonolayer and monolayer regimes

We study the strain relaxation mechanisms of Cu on Pd(111) up to the monolayer regime using two different computational methodologies, basin-hopping global optimization and energy minimization with a repulsive bias potential. Our numerical results are consistent with experimentally observed layer-by-layer growth mode. However, we find that the structure of the Cu layer is not fully pseudomorphic even at low coverages. Instead, the Cu adsorbates forms fcc and hcp stacking domains, separated by partial misfit dislocations. We also estimate the minimum energy path and energy barriers for transitions from the ideal epitaxial state to the fcc-hcp domain pattern.

cond-mat.mes-hall↗

arXiv2005

Leakage Tests for Am-241 Solid Sources Used for Liquid Xenon Detector Monitoring

Experimental tests are described to check solid Am-241 radioactive sources used to monitor operation of liquid xenon detectors. In particular, radioactive leakage was tested in extreme temperature conditions following immersion in liquid nitrogen for different time periods. No radioactivity loss was detected from the sources considered. The paper describes the source characteristics, test methods and results obtained.

physics.med-ph↗