arXiv subjects

G. Valencia-Ortega

Publications and source records attributed to G. Valencia-Ortega.

9 recordsLinked to original sources

arXiv2024

Performance at maximum figure of merit for a Brownian Carnot refrigerator

This paper focuses on the coefficient of performance (COP) at maximum figure of merit $χ$ for a Brownian Carnot-like refrigerator, within the context of symmetric Low-Dissipation approach. Our proposal is based on the Langevin equation for a Brownian particle bounded to a harmonic potential trap, which can perform Carnot-like cycles at finite time. We show that under quasistatic conditions the COP has the same expression as the macroscopic Carnot refrigerator. However, for irreversible cycles at finite time and under symmetric dissipation, the optimal COP is the counterpart of Curzon-Ahlborn efficiency for irreversible macroscopic refrigerators.

cond-mat.stat-mech↗

arXiv2022

Carnot, Stirling, Ericsson stochastic heat engines: Efficiency at maximum power

This work obtains the efficiency at maximum power for a stochastic heat engine performing Carnot-like, Stirling-like and Ericsson-like cycles. For the mesoscopic engine a Brownian particle trapped by an optical tweezers is considered. The dynamics of this stochastic engine is described as an overdamped Langevin equation with a harmonic potential, whereas is in contact with two thermal baths at different temperatures, namely, hot ($T_h$) and cold ($T_c$). The harmonic oscillator Langevin equation is transformed into a macroscopic equation associated with the mean value $\langle x^2(t)\rangle$ using the original Langevin approach. At equilibrium stationary state this quantity satisfies a state-like equation from which the thermodynamic properties are calculated. To obtained the efficiency at maximum power it is considered the finite-time cycle processes under the framework of low dissipation approach.

cond-mat.stat-mech↗

arXiv2022

Energy conversion theorems for some linear steady-states

One of the main issues that real energy converters present, when they produce effective work, is the inevitable entropy production. Within the context of Non-equilibrium Thermodynamics, entropy production tends to energetically degrade man-made or living systems. On the other hand, it is also not useful to think about designing an energy converter that works in the so-called minimum entropy production regime since the effective power output and efficiency are zero. In this manuscript, we establish some \textit{Energy Conversion Theorems} similar to Prigogine's one with constrained forces, their purpose is to reveal trade-offs between design and the so-called operation modes for $\left(2\times2\right)$--linear isothermal energy converters. The objective functions that give rise to those thermodynamic constraints show stability. A two--meshes electric circuit was built as an example to demonstrate the Theorems' validity. Likewise, we reveal a type of energetic hierarchy for power output, efficiency and dissipation function when the circuit is tuned to any of the operating regimes studied here: maximum power output ($MPO$), maximum efficient power ($MPη$), maximum omega function ($MΩ$), maximum ecological function ($MEF$), maximum efficiency ($Mη$) and minimum dissipation function ($mdf$).

cond-mat.stat-mech↗

arXiv2020

Energetic optimization considering a generalization of the ecological criterion in traditional simple-cycle and combined cycle power plants

The fundamental issue in the energetic performance of power plants, working both as traditional fuel engines and as combined cycle turbine (gas-steam), lies in quantifying the internal irreversibilities which are associated with the working substance operating in cycles. The purpose of several irreversible energy converter models is to find objective thermodynamic functions that determine operation modes for real thermal engines and at the same time study the trade off between energy losses per cycle and the useful energy. As those objective functions, we focus our attention on a generalization of the so-called ecological function in terms of an $ε$--parameter that depends on the particular heat transfer law used in the irreversible heat engine model. In this work, we mathematically describe the configuration space of an irreversible Curzon-Ahlborn type model. The above allows to determine the optimal relations between the model parameters so that a power plant operates in physically accessible regions, taking into account internal irreversibilities, introduced in two different ways (additively and multiplicatively). In addition, we establish the conditions that the $ε$--parameter must fulfill for the energy converter works in an optimal region between maximum power output and maximum efficiency points.

physics.app-ph↗

arXiv2020

Local and global stability analysis of a Curzon-Ahlborn model applied to power plants working at maximum $k$-efficient power

The analysis of the effect of noisy perturbations on real heat engines, working on any steady-state regime has been a topic of interest within the context of Finite-Time Thermodynamics (FTT). The study of their local stability has been proposed through the so-called performance regimes: maximum power output, maximum ecological function, among others. Recently, the global stability analysis of an endoreversible heat engine was also studied taking into account the same performance regimes. We present a study of local and global stability analysis of power plant models (the Curzon-Ahlborn model) operating on a generalized efficient power regime called maximum k-efficient power. We apply the Lyapunov stability theory to construct the Lyapunov functions to prove the asymptotically stable behavior of the steady-state of intermediate temperatures in the Curzon-Ahlborn model. We consider the effect of a linear heat transfer law on the phase portrait description of real power plants, as well as the role of the $k$ parameter in the evolution of perturbations to heat flow. In general, restructured operation conditions show better stability in external perturbations.

physics.app-ph↗

arXiv2019

Energetic optimization effects in single resonant tunneling $GaAs$--nanoconverters

Several models of thermionic energy nanoconverters have been proposed to study the transport phenomena that take place in electronic devices. For example, in resonant tunneling junctions those phenomena are manifested through the thermoelectric effects. The coupling between the electron flux and the heat flux in this type of semiconductor heterostructures, not only allows to obtain transport coefficients (electrical and thermal conductivities, and a Seebeck--like and Peltier--like coefficients), but also to study its operation as a thermionic generator or as a refrigerator within the context of irreversible thermodynamics. The existence of the characteristic steady states that can be reached by any linear energy converter led us to characterize a family of Seebeck--like coefficients, as well as establish bounds for the values of a kind of figure of merit $(Tz'_{D,I})$, both associated with the well-known operating regimes: minimum dissipation function, maximum power output, maximum efficiency and maximum compromise function. By taking as example an $Al_{x}GaAs/GaAs$ junction, we found that the transport coefficients depend strongly on temperature and the conduction band height, which can be modulated according to the selected operation mode.

cond-mat.mes-hall↗

arXiv2018

Thermal optimization of Curzon-Ahlborn heat engines operating under some generalized efficient power regimes

In order to establish better performance compromises between the process functionals of a heat engine, in the context of finite time thermodynamics (FTT), we propose some generalizations for the well known Efficient Power function through certain variables called < >. These generalization proposals show advantages in the characterization of operation modes for an endoreversible heat engine model. In particular, with introduce the k-Efficient Power regime. For this objective function we find the performance of the operation of some power plants through the parameter k. Likewise, for plants that operate in a low efficiency zone, within a configuration space, the k parameter allow us to generate conditions for these plants to operate inside of a high efficiency and low dissipation zone.

cond-mat.stat-mech↗

arXiv2017

Thermodynamic properties of diatomic molecules systems under anharmonic Eckart potential

Due to one of the most representative contributions to the energy in diatomic molecules being the vibrational, we consider the generalized Morse potential (GMP) as one of the typical potential of interaction for one-dimensional microscopic systems, which describes local anharmonic effects. From Eckart potential (EP) model, it is possible to find a connection with the GMP model, as well as obtain the analytical expression for the energy spectrum because it is based on $S\,O\left(2,1\right)$ algebras. In this work we find the macroscopic properties such as vibrational mean energy $U$, specific heat $C$, Helmholtz free energy $F$ and entropy $S$ for a heteronuclear diatomic system, along with the exact partition function and its approximation for the high temperature region. Finally, we make a comparison between the graphs of some thermodynamic functions obtained with the GMP and the Morse potential (MP) for $H\,Cl$ molecules.

physics.chem-ph↗

arXiv2016

Thermodynamic optimization of an electric circuit as a non-steady energy converter

Electrical circuits with transient elements can be good examples of systems where non--steady irreversible processes occur, so in the same way as a steady state energy converter, we use the formal construction of the first order irreversible thermodynamic (FOIT) to describe the energetics of these circuits. In this case, we propose an isothermic model of two meshes with transient and passive elements, besides containing two voltage sources (which can be functions of time); this is a non--steady energy converter model. Through the Kirchhoff equations, we can write the circuit phenomenological equations. Then, we apply an integral transformation to linearise the dynamic equations and rewrite them in algebraic form, but in the frequency space. However, the same symmetry for steady states appears (cross effects). Thus, we can study the energetic performance of this converter model by means of two parameters: the "force ratio" and the "coupling degre". Furthermore, it is possible to obtain the characteristic functions (dissipation function, power output, efficiency, etc.). They allow us to establish a simple optimal operation regime of this energy converter. As an example, we obtain the converter behavior for the maximum efficient power regime (MPE).

cond-mat.stat-mech↗